Aprendizagem do profissional de saúde na web: perfis, percepções e representações sociais

No campo da educação permanente na área da saúde, podem ser citadas diferentes iniciativas que visam formar profissionais com o uso das Tecnologias de Informação e Comunicação (TICs). No entanto, pouco se sabe ainda sobre o uso da web por profissionais da saúde como estratégia da aprendizagem formal, menos ainda quando se aborda a aprendizagem informal. Percebe-se que as ações no campo da educação com uso e, sobretudo, para o uso da tecnologia como ferramenta de aprendizagem ainda são feitas de forma muito intuitivas, por acerto e erro, tendo em vista a própria evolução da tecnologia em um curto período temporal. Sendo assim, o objetivo geral da pesquisa é compreender o perfil, as percepções e representações sociais sobre aprendizagem na web de médicos, enfermeiros e cirurgiões-dentistas e uma possível influência desse uso no cotidiano profissional. Para atingir o objetivo delimitado, foi empregada a metodologia quali-quantitativa através da utilização de um questionário on-line, contendo questões fechadas e questões abertas, respondido por 277 alunos do Curso de Especialização em Saúde da Família oferecido pelo núcleo da Universidade do Estado do Rio de Janeiro (UERJ) da Universidade Aberta do Sistema Único de Saúde (UNA-SUS). Para análise das questões fechadas, foi utilizada a estatística descritiva e testes bivariados não paramétricos. A análise das questões abertas foi feita à luz da teoria da representações sociais com emprego da técnica da análise do conteúdo e das evocações livres. Os resultados da pesquisa foram apresentados em formato de três trabalhos para apresentação em eventos e quatro artigos submetidos para publicação em revistas de alta qualidade acadêmica. Com base nos resultados, destaca-se como preocupação que o simples consumo de informações esteja justificando e a ele esteja restrito o uso da internet para os sujeitos, em detrimento às possibilidades educacionais da cibercultura. Acredita-se ser necessário o desenvolvimento de ações que subsidiem uma prática mais reflexiva a fim de reverter um possível uso reduzido das potencialidades da TICs.

A field effect transistor using highly nitrogen-doped CVD diamond for power device applications

A new idea of power device, which contains highly nitrogen-doped CVD diamond and Schottky contact, is proposed to actualise a power device with diamond. Two-dimensional simulation is conducted using ISE TCAD device simulator. While comparably high current is obtained in a transient simulation as expected, this current does not contribute to the drain-source current because of the symmetry of the device. Using an asymmetric structure or bias conditions, the device has high potential as an electric device for extremely high power, high frequency and high temperature. © 2003 Elsevier Science B.V. All rights reserved.

Prevalence of brevetoxins in prey fish of bottlenose dolphins in Sarasota Bay, Florida

Blooms of the brevetoxin-producing dinoflagellate Karenia brevis have been linked to high mortality of bottlenose dolphins Tursiops truncatus on Florida’s Gulf of Mexico coast. A clear understanding of trophic transfer of brevetoxin from its algal source up the food web to top predators is needed to assess exposure of affected dolphin populations. Prey fish constitute a means of accumulating and transferring brevetoxins and are potential vectors of brevetoxin to dolphins frequently exposed to K. brevis blooms. Here we report results of brevetoxin analyses of the primary fish species consumed by long-term resident bottlenose dolphins inhabiting Sarasota Bay, Florida. Fish collected during K. brevis blooms in 2003 to 2006 were analyzed by competitive enzyme-linked immunosorbent assay (ELISA) and had brevetoxin concentrations ranging from 4 to 10844 ng PbTx-3 eq g–1 tissue. Receptor binding assay (RBA) and liquid chromatography–mass spectrometry (LC-MS) analysis confirmed toxicity and the presence of parent brevetoxins and known metabolites. Fish collected in the absence of K. brevis blooms tested positive for brevetoxin by ELISA and RBA, with concentrations up to 1500 ng PbTx-3 eq g–1 tissue. These findings implicate prey fish exposed to K. brevis blooms as brevetoxin vectors for their dolphin predators and provide a critical analysis of persistent brevetoxin loads in the food web of dolphins repeatedly exposed to Florida red tides.

An examination of spatial and temporal genetic variation in walleye pollock (Theragra chalcogramma) using allozyme, mitochondrial DNA, and microsatellite data

We used allozyme, microsatellite, and mitochondrial DNA (mtDNA) data to test for spatial and interannual genetic diversity in wall-eye pollock (Theragra chalcogramma) from six spawning aggregations representing three geographic regions: Gulf of Alaska, eastern Bering Sea, and eastern Kamchatka. Interpopulation genetic diversity was evident primarily from the mtDNA and two allozyme loci (SOD-2*, MPI*). Permutation tests ˆindicated that FST values for most allozyme and microsatellite loci were not significantly greater than zero. The microsatellite results suggested that high locus polymorphism may not be a reliable indicator of power for detecting population differentiation in walleye pollock. The fact that mtDNA revealed population structure and most nuclear loci did not suggests that the effective size of most walleye pollock populations is large (genetic drift is weak) and migration is a relatively strong homogenizing force. The allozymes and mtDNA provided mostly concordant estimates of patterns of spatial genetic variation. These data showed significant genetic variation between North American and Asian populations. In addition, two spawning aggregations in the Gulf of Alaska, in Prince William Sound, and off Middleton Island, appeared genetically distinct from walleye pollock spawning in the Shelikof Strait and may merit management as a distinct stock. Finally, we found evidence of interannual genetic variation in two of three North American spawning aggregations, similar in magnitude to the spatial variation among North American walleye pol-lock. We suggest that interannual genetic variation in walleye pollock may be indicative of one or more of the following factors: highly variable reproductive success, adult philopatry, source-sink metapopulation structure, and intraannual variation (days) in spawning timing among genetically distinct but spatially identical spawning aggregates.

Evidence from the Pacific Northwest for solar modulation of climate and of northern ecosystems

EXTRACT (SEE PDF FOR FULL ABSTRACT): The 250-year net annual snow accumulation, or mass balance, time series derived from the Mt. Logan (Yukon) ice core has been spectrally analyzed and is found to contain a nominal 11-year waveform. The stable isotope time series contains a significant amount of power between 9 and 13 years, although this record is evidently not a straightforward proxy for air temperatures. The signal in the mass balance time series exhibits a close relationship with the sunspot cycle waveform and is, therefore, assumed to be related to it. Waveforms showing a high correlation with the solar cycle are found in other climate data in the region. ... Taken collectively, the data point to a link between solar variability, atmospheric variability, climate, and selected ecological dynamics in the Pacific Northwest, but other data, not presented, indicate these relationships may hold elsewhere. So far, the evidence is empirical; complete details of the physical mechanisms involved have yet to be synthesized in a satisfactory way.

Influence of the state of the inlet endwall boundary layer on the interaction between pressure surface separation and endwall flows

This paper describes the effect of the state of the inlet boundary layer (laminar or turbulent) on the structure of the endwall flow on two different profiles of low-pressure (LP) turbine blades (solid thin and hollow thick). At present the state of the endwall boundary layer at the inlet of a real LP turbine is not known. The intention of this paper is to show that, for different designs of LP turbine, the state of the inlet boundary layer affects the performance of the blade in very different ways. The testing was completed at low speed in a linear cascade using area traversing, flow visualization and static pressure measurements. The paper shows that, for a laminar inlet boundary layer, the two profiles have a similar loss distribution and structure of endwall flow. However, for a turbulent inlet boundary layer the two profiles are shown to differ significantly in both the total loss and endwall flow structure. The pressure side separation bubble on the solid thin profile is shown to interact with the passage vortex, causing a higher endwall loss than that measured on the hollow thick profile.

The prediction of hot streak migration in a high-pressure turbine

Accurate predictions of combustor hot streak migration enable the turbine designer to identify high-temperature regions that can limit component life. It is therefore important that these predictions are achieved within the short time scales of a design process. This article compares temperature measurements of a circular hot streak through a turning duct and a research turbine with predictions using a three-dimensional Reynolds-averaged Navier-Stokes solver. It was found that the mixing length turbulence model did not predict the hot streak dissipation accurately. However, implementation of a very simple model of the free stream turbulence (FST) significantly improved the exit temperature predictions on both the duct and research turbine. One advantage of the simple FST model described over more complex alternatives is that no additional equations are solved. This makes the method attractive for design purposes, as it is not associated with any increase in computational time.

AC losses of superconducting racetrack coil in various magnetic conditions

High-temperature superconductors have created the opportunity for a step change in the technology of power applications. Racetrack superconducting coils made from YBCO coated conductors have been used in several engineering applications including SMES, rotor or stator windings of electric machines. AC loss is one of the most important factors that determine the design and performance of superconducting devices. In this paper, a numerical model is developed to calculate the AC losses in superconducting racetrack coils in different magnetic conditions. This paper first discusses the AC losses of the coils in self-field or external field only. It then goes to investigate the AC losses of the coils being exposed to AC ripple field and a DC background field. Finally, the AC losses of the coils carrying DC current and being exposed to AC field are calculated. These two scenarios correspond to using superconducting coils as the rotor field winding of an electric machine. © 2010 IEEE.

A novel design of Thermally Actuated Magnetization Flux pump for high temperature superconducting bulks

High temperature superconductors, such as melt-processed YBCO bulks, have great advantages on trapping strong magnetic fields in liquid nitrogen. To enable them to function well, there are some traditional ways of magnetizing them, in which the YBCO bulks are magnetized instantly under a very strong source of magnetic field. These ways would consume great amounts of power to make the superconductors trap as much field as possible. Thermally Actuated Magnetization (TAM) Flux pump has been proved a perfect substitution for these expensive methods by using a relatively small magnet as the source. In this way, the field is developed gradually over many pulses. Unlike conventional flux pumping ways, the TAM does not drive the superconductor normal during the process of magnetization. In former experiments for the flux pump, some fundamental tests were done. In this paper, the experiment system is advanced to a new level with better temperature control to the thermal waves moving in the Gadolinium and with less air gap for the flux lines sweeping through the superconductor. This experiment system F leads to a stronger accumulation of the magnetic field trapped in the YBCO bulk. We also tried different ways of sending the thermal waves and found out that the pumping effect is closely related to the power of the heaters and the on and off time. © 2010 IEEE.

Survey on the idle capacity of fish processing (freezing) plants in India - 1. West Coast

The extent of idle capacity in fish processing (freezing) plants estimated by stratified random sampling is reported. The estimates for 1978 and 1979 for the processing plants on the west coast of India were 76.9 % and 73.2 % respectively at the rate of 250 working days per annum and two shifts per day. The percentage error of estimates worked out to 6.04 for 1978 and 6.98 for 1979. Substantial under utilization of processing plants noticed in all the states accounts mainly to the non-availability of raw material (prawn), high cost of production and shortage of power.

Survey on the idle capacity of fish processing (freezing) plants in India - 2. East coast

The extent of idle capacity in the fish processing (freezing) plants in the east coast of India estimated by stratified random sampling and the factors responsible for the same are reported. The estimates of idle capacity of fish processing plants in the east coast for the years 1978 and 1979 were respectively 75.9% and 72.5% on the basis of 250 working days per annum and double shift per day. The percentage errors of estimates worked out to 6.9 for 1978 and 4.7 for 1979. The corresponding figures were worked out on the basis of 200 working days also. Substantial under-utilisation of plants in all the maritime states in the east coast accounted mainly to non-availability of raw material, high cost of production, shortage of power, scarcity of ice and potable water during peak season and frequent labour troubles.

Safety implications of reactivity variations in fast thorium ADSRs

Nuclear power generation offers a reliable, low-impact and large-scale alternative to fossil fuels. However, concerns exist over the safety and sustainability of this method of power production, and it remains unpopular with some governments and pressure groups throughout the world. Fast thorium fuelled accelerator-driven sub-critical reactors (ADSRs) offer a possible route to providing further re-assurance regarding these concerns on account of their properties of enhanced safety through sub-critical operation combined with reduced actinide waste production from the thorium fuel source. The appropriate sub-critical margin at which these reactors should operate is the subject of continued debate. Commercial interests favour a small sub-critical margin in order to minimise the size of the accelerator needed for a given power output, whilst enhanced safety would be better satisfied through larger sub-critical margins to further minimise the possibility of a criticality excursion. Against this background, this paper examines some of the issues affecting reactor safety inherent within thorium fuel sources resulting from the essential Th90232→Th90233→Pa91233→U92233 breeding chain. Differences in the decay half-lives and fission and capture cross-sections of 233Pa and 233U can result in significant changes in the reactivity of the fuel following changes in the reactor power. Reactor operation is represented using a homogeneous lumped fast reactor model that can simulate the evolution of actinides and reactivity variations to first-order accuracy. The reactivity of the fuel is shown to increase significantly following a loss of power to the accelerator. Where the sub-critical operating margins are small this can result in a criticality excursion unless some form of additional intervention is made, for example through the insertion of control rods. © 2012 Elsevier Ltd. All rights reserved.