Settlement of fill with particular reference to opencast coal mining sites

A study of information available on the settlement characteristics of backfill in restored opencast coal mining sites and other similar earthworks projects has been undertaken. In addition, the methods of opencast mining, compaction controls, monitoring and test methods have been reviewed. To consider and develop the methods of predicting the settlement of fill, three sites in the West Midlands have been examined; at each, the backfill had been placed in a controlled manner. In addition, use has been made of a finite element computer program to compare a simple two-dimensional linear elastic analysis with field observations of surface settlements in the vicinity of buried highwalls. On controlled backfill sites, settlement predictions have been accurately made, based on a linear relationship between settlement (expressed as a percentage of fill height) against logarithm of time. This `creep' settlement was found to be effectively complete within 18 months of restoration. A decrease of this percentage settlement was observed with increasing fill thickness; this is believed to be related to the speed with which the backfill is placed. A rising water table within the backfill is indicated to cause additional gradual settlement. A prediction method, based on settlement monitoring, has been developed and used to determine the pattern of settlement across highwalls and buried highwalls. The zone of appreciable differential settlement was found to be mainly limited to the highwall area, the magnitude was dictated by the highwall inclination. With a backfill cover of about 15 metres over a buried highwall the magnitude of differential settlement was negligible. Use has been made of the proposed settlement prediction method and monitoring to control the re-development of restored opencase sites. The specifications, tests and monitoring techniques developed in recent years have been used to aid this. Such techniques have been valuable in restoring land previously derelict due to past underground mining.

Power quality improvements for LV networks

In order to increase the capacity of the existing Low Voltage grid, one solution is to increase the nominal residential network voltage from 230 V to 300 V, which is easily accommodated within the voltage rating of existing infrastructure such as cabling. A power electronic AC-AC converter would then be used to step the voltage back down to 230 V at an individual property. Such equipment could also be used to provide power quality improvements on both the utility and customer side of the converter depending on its topology. This paper provides an overview of a project which is looking at the development of such a device. The project is being carried out in collaboration with the local UK, Distribution Network Operator (DNO).

Perspective work on optical fibre sensors

Optical fibre based sensors are transforming industry by permitting monitoring in hitherto inaccessible environments or measurement approaches that cannot be reproduced using conventional electronic sensors. A multitude of techniques have been developed to render the fibres sensitive to a wide range of parameters including: temperature, strain, pressure (static and dynamic), acceleration, rotation, gas type, and specific biochemical species. Constructed entirely of glass or polymer material, optical fibre devices like fibre gratings offer the properties: low loss, dielectric construction, small size, multiplexing, and so on [1-3]. In this paper, the authors will show the latest developing industrial applications, using polymer optical fibre (POF) devices, and comparing their performance with silica optical fibre devices. The authors address two pressing commercial requirements. The first concerns the monitoring of fuel level in civil aircraft. There is a strong motivation in the aerospace industry to move away from electrical sensors, especially in the fuel system. This is driven by the need to eliminate potential ignition hazards, the desire to reduce cabling weight and the need to mitigate the effects of lightning strikes in aircraft where the conventional metallic skin is increasingly being replaced by composite materials. In this case, the authors have developed pressure sensors based on a diaphragm in which a polymer fibre Bragg grating (POFBG) has been embedded [3]. These devices provide high pressure sensitivity enabling level measurement in the mm range. Also, it has developed an approach incorporating several such sensors which can compensate for temperature drifts and is insensitive to fluid density. Compared with silica fibre-based sensors, their performance is highly enhanced. Initial results have attracted the interest of Airbus from UK, who is keen to explore the potential of optical technology in commercial aircraft. The second concerns the monitoring of acoustic signals and vibration in the subsea environment, for applications in geophysical surveying and security (detection of unwanted craft or personnel). There is strong motivation to move away from electrical sensors due to the bulk of the sensor and associated cabling and the impossibility of monitoring over large distances without electrical amplification. Optical approaches like optical hydrophones [5] offer a means of overcoming these difficulties. In collaboration with Kongsberg from Norway, the authors will exploit the sensitivity improvements possible by using POF instead of silica fibre. These improvements will arise as a result of the much more compliant nature of POF compared to silica fibre (3 GPa vs 72 GPa, respectively). Essentially, and despite the strain sensitivity of silica and POFBGs being very similar, this renders the POF much more sensitive to the applied stress resulting from acoustic signals or vibration. An alternative way of viewing this is that the POF is better impedance-matched to the surrounding environment (water for the intended applications), because although its impedance is higher than that of water, it is nearly an order of magnitude smaller than that of silica. Finally, other future industrial applications will be presented and discussed, showing the vast range of the optical fiber devices in sensing applications.

Hydrologic Dynamics of the Ground-Water-Dependent Sian Ka’an Wetlands, Mexico, Derived from InSAR and SAR Data

The 5,280 km2 Sian Ka’an Biosphere Reserve includes pristine wetlands fed by ground water from the karst aquifer of the Yucatan Peninsula, Mexico. The inflow through underground karst structures is hard to observe making it difficult to understand, quantify, and predict the wetland dynamics. Remotely sensed Synthetic Aperture Radar (SAR) amplitude and phase observations offer new opportunities to obtain information on hydrologic dynamics useful for wetland management. Backscatter amplitude of SAR data can be used to map flooding extent. Interferometric processing of the backscattered SAR phase data (InSAR) produces temporal phase-changes that can be related to relative water level changes in vegetated wetlands. We used 56 RADARSAT-1 SAR acquisitions to calculate 38 interferograms and 13 flooding maps with 24 day and 48 day time intervals covering July 2006 to March 2008. Flooding extent varied between 1,067 km2 and 2,588 km2 during the study period, and main water input was seen to take place in sloughs during October–December. We propose that main water input areas are associated with water-filled faults that transport ground water from the catchment to the wetlands. InSAR and Landsat data revealed local-scale water divides and surface water flow directions within the wetlands.

Geochemical determination of the fate and transport of injected fresh wastewater to a deep saline aquifer

Deep well injection into non-potable saline aquifers of treated domestic wastewater has been used in Florida for decades as a safe and effective alternative to ocean outfall disposal. The objectives of this study were to determine the fate and transport of injected wastewater at two deep well injection sites in Miami Dade County, Florida, USA. Detection of ammonium in the Middle Confining units of the Floridan aquifer above the injection zone at both sites has been interpreted as evidence of upward migration of injected wastewater, posing a risk to underground sources of drinking water. Historical water quality data, including ammonia, chloride, temperature, and pH from existing monitoring wells at both sites from 1983 to 2008, major ions collected monthly from 2006 and 2008, and a synoptic sampling event for stable isotopes, tritium, and dissolved gases in 2008, were used to determine the source of ammonium in groundwater and possible migration pathways. Geochemical modeling was used to determine possible effects of injected wastewater on native water and aquifer matrix geochemistry. Injected wastewater was determined to be the source of elevated ammonium concentrations above ambient water levels, based on the results of major ion concentrations, tritium, dissolved noble gases and 15N isotopes analyses. Various possible fluid migration pathways were identified at the sites. Data for the south site suggest buoyancy-driven vertical pathways to overlying aquifers bypassing the confining units, with little mixing of injected wastewater with native water as it migrated upward. Once it is introduced into an aquifer, the injectate appeared to migrate advectively with the regional groundwater flow. Geochemical modeling indicated that CO 2-enriched injected wastewater allowed for carbonate dissolution along the vertical pathways, enhancing permeability along these flowpaths. At the north site, diffusive upward flow through the confining units or offsite vertical pathways were determined to be possible, however no evidence was detected for any on-site confining unit bypass pathway. No evidence was observed at either site of injected wastewater migration to the Upper Floridan aquifer, which is used as a municipal water supply and for aquifer storage and recovery.

Armed Groups and Violence in Paraguay

Armed violence in Paraguay is not a recent phenomenon. During the second half of the XX Century, Paraguay saw the rise of a larger number of underground, revolutionary movements that sought the overthrow of the Alfredo Stroessner’s (1954-1989) government. From among those movements emerged the Partido Patria Libre (or, Free Fatherland, also known for its acronym PPL), made up of a two branches: one legal and the other one, operational. The latter was based on people’s power, as represented by “Ejército del Pueblo Paraguayo” (or, the Paraguayan People’s Army, with acronym EPP). After EPP broke with PPL in March 2008, this Marxist-oriented revolutionary project, which was apparently oriented to put an end to the social, political and economic inequalities in Paraguay, began to carry out markedly criminal activities, which included bank robberies, kidnappings, assassinations, terrorist attacks and armed confrontations. Its strategies and modus operandi utilized by the Armed Revolutionary Forces of Colombia (FARC). Paraguay features a farm sector in a state of crisis, in which cattle-ranchers, peasants and agro-exporting companies live in a constant strife. The Paraguayan Departments that are the most affected by this situation are Concepciόn, San Pedro, Canindeyú y Caazapá, which also suffer from a weak government presence. This deficiency has made these departments ripe for drug-trafficking activity by Brazilian groups such as Primer Comando Capital (i.e., First Capital command), also PCC and Comando Vermelho, (i.e., The Red Command). That is why many peasants, now recruited by EPP, have joined the drug-trafficking business and that, not only as marihuana growers but as “campanas” (i.e., early warning sentinels) for the organization. This helps shape their attitudes for their future involvement in all areas of drug-trafficking. Paraguayan society is the result of social inequity and inequality, such as those resulting from a lack of opportunity. Although Paraguay has successfully recovered from the last world economic crisis, economic growth, by itself, does not ensure an improvement in the quality of life. As long as such economic and social gaps persist and the government fails to enact the policies that would result in a more just society and toward EPP neutralization or containment, the latter is bound to grow stronger. In this context, the situation in Paraguay calls for more research into the EPP phenomenon. It would also seem necessary for Paraguay to promote an open national debate that includes all sectors of society in order to raise consciousness and to induce society to take actual steps to eliminate the EPP, as well as any other group that might arise in the immediate future. EPP has strong connections with the Frente Patriόtico Manuel Rodríguez in Chile and other armed groups and peasant movements in other countries of this region. Although most governments in the region are aware that the armed struggle is not a solution to current problems, it might be worth it to hold a regional debate about armed or insurgent groups in Latin American to seek common strategies and cooperation on dealing with them since the expansion of these armed groups is a problem for all.

An interactive environmental site assessment audit for Wagner Creek river basin clean up project

The primary purpose of this thesis was to design and create an Interactive Audit to conduct Environmental Site Assessments according to American Society of Testing Material's (ASTM) Phase I Standards at the Wagner Creek study area. ArcPad and ArcIMS are the major software that were used to create the model and ArcGIS Desktop was used for data analysis and to export shapefile symbology to ArcPad. Geographic Information Systems (GIS) is an effective tool to deploy these purposes. This technology was utilized to carry out data collection, data analysis and to display data interactively on the Internet. Electronic forms, customized for mobile devices were used to survey sites. This is an easy and fast way to collect and modify field data. New data such as land use, recognized environmental conditions, and underground storage tanks can be added into existing datasets. An updated map is then generated and uploaded to the Internet using ArcIMS technology. The field investigator has the option to generate and view the Inspection Form at the end of his survey on site, or print a hardcopy at base. The mobile device also automatically generates preliminary editable Executive Reports for any inspected site.

Russia's Islam: Discourse on Identity, Politics, and Security

Despite the long history of Muslims in Russia, most scholarly and political literatures on Russia’s Islam still narrowly interpret Muslim-Slavs relations in an ethnic-religious oppositional framework. In my work, I examine Russia’s discourse on Islam to argue that, in fact, the role of Islam in post-Soviet Russia is complex. Drawing from direct sources from academic, state, journalistic, and underground circles, often neglected by Western commentators, I identify ideational patterns in conceptualizations of Islam and reconstruct relational networks among authors. To explain complex intertextual relations within specific contexts, I utilize an analytically eclectic method that appropriately combines theories from different paradigms and/or disciplines. Thanks to my multi-dimensional approach, I show that, contrary to traditional views, Russia’s Muslims participate in processes of post-Soviet Russia’s identity formation. Starting from textual contents, avoiding pre-formed analytical frames, I argue that many Muslims in Russia perceive themselves as part of Russian civilization – even when they challenge the status-quo. Building on my initial findings, I state that a key element in Russia’s conceptualization of Islam is the definition, elaborated in the 1990s, of traditional Islam as part of Russian civilizational history, as opposed to extremist Islam as extraneous, hostile phenomenon. The differentiation creates an unprecedently safe, if confined, space for Islamic propositions, of which Muslims are taking advantage. Embedded in debates on Russian civilization, conceptualizations of Islam, then, influence Russia’s (geo)political self-perceptions and, consequently, its domestic and international policies. In particular, Russian so-far neglected Islamic doctrine supports views of Islamic terrorism as a political and not religious phenomenon. Hence, Russia interprets both terrorism and counterterrorism within its own historical tradition, causing its strategy to be at odds with Western views. Less apparently, these divergences affect Russian-U.S. broader relations. Finally, in revealing the civilizational value of Russia’s Islam, I expose intellectual relations among influential subjects who share the aim to devise a new civilizational model that should combine Slavic and non-Slavic, Orthodox and Islamic, Western, and Asian components. In this old Russian dilemma, the novelty is Muslims’ participation.

The Study of Sonar for Imaging of the Solid-Liquid Interface Inside Large Tanks

Retrieval, treatment, and disposal of high-level radioactive waste (HLW) is expected to cost between 100 and 300 billion dollars. The risk to workers, public health, and the environment are also a major area of concern for HLW. Visualization of the interface between settled solids and the optically opaque liquid is needed for retrieval of the waste from underground storage tanks. A Profiling sonar selected for this research generates 2-D image of the interface. Multiple experiments were performed to demonstrate the effectiveness of sonar in real-time monitoring the interface inside HLW tanks. First set of experiments demonstrated that objects shapes could be identified even when 30% of solids entrained in liquid, thereby mapping the interface. Simulation of sonar system validated these results. Second set of experiments confirmed the sonar’s ability in detecting the solids with density similar to the immersed liquid. Third set of experiments determined the affects of near by objects on image resolution. Final set of experiments proved the functional and chemical capabilities of sonar in caustic solution.

Integrated Surface-Ground Water Modeling in Wetlands With Improved Methods to Simulate Vegetative Resistance to Flow

This dissertation focused on developing an integrated surface – subsurface hydrologic simulation numerical model by programming and testing the coupling of the USGS MODFLOW-2005 Groundwater Flow Process (GWF) package (USGS, 2005) with the 2D surface water routing model: FLO-2D (O’Brien et al., 1993). The coupling included the necessary procedures to numerically integrate and verify both models as a single computational software system that will heretofore be referred to as WHIMFLO-2D (Wetlands Hydrology Integrated Model). An improved physical formulation of flow resistance through vegetation in shallow waters based on the concept of drag force was also implemented for the simulations of floodplains, while the use of the classical methods (e.g., Manning, Chezy, Darcy-Weisbach) to calculate flow resistance has been maintained for the canals and deeper waters. A preliminary demonstration exercise WHIMFLO-2D in an existing field site was developed for the Loxahatchee Impoundment Landscape Assessment (LILA), an 80 acre area, located at the Arthur R. Marshall Loxahatchee National Wild Life Refuge in Boynton Beach, Florida. After applying a number of simplifying assumptions, results have illustrated the ability of the model to simulate the hydrology of a wetland. In this illustrative case, a comparison between measured and simulated stages level showed an average error of 0.31% with a maximum error of 2.8%. Comparison of measured and simulated groundwater head levels showed an average error of 0.18% with a maximum of 2.9%.

First-year and second-year snow properties on sea ice in the Weddell Sea during POLARSTERN cruise ANT-XXII/2 (ISPOL) during the drift

Observations of snow properties, superimposed ice, and atmospheric heat fluxes have been performed on first-year and second-year sea ice in the western Weddell Sea, Antarctica. Snow in this region is particular as it does usually survive summer ablation. Measurements were performed during Ice Station Polarstern (ISPOL), a 5-week drift station of the German icebreaker RV Polarstern. Net heat flux to the snowpack was 8 W/m**2, causing only 0.1 to 0.2 m of thinning of both snow cover types, thinner first-year and thicker second-year snow. Snow thinning was dominated by compaction and evaporation, whereas melt was of minor importance and occurred only internally at or close to the surface. Characteristic differences between snow on first-year and second-year ice were found in snow thickness, temperature, and stratigraphy. Snow on second-year ice was thicker, colder, denser, and more layered than on first-year ice. Metamorphism and ablation, and thus mass balance, were similar between both regimes, because they depend more on surface heat fluxes and less on underground properties. Ice freeboard was mostly negative, but flooding occurred mainly on first-year ice. Snow and ice interface temperature did not reach the melting point during the observation period. Nevertheless, formation of discontinuous superimposed ice was observed. Color tracer experiments suggest considerable meltwater percolation within the snow, despite below-melting temperatures of lower layers. Strong meridional gradients of snow and sea-ice properties were found in this region. They suggest similar gradients in atmospheric and oceanographic conditions and implicate their importance for melt processes and the location of the summer ice edge.

Estudo comparativo de diferentes sistemas de injeção de vapor aplicados à remediação de solos contaminados por diesel

Among the potentially polluting economic activities that compromise the quality of soil and groundwater stations are fuel dealers. Leakage of oil derived fuels in underground tanks or activities improperly with these pollutants can contaminate large areas, causing serious environmental and toxicological problems. The number of gas stations grew haphazardly, without any kind of control, thus the environmental impacts generated by these enterprises grew causing pollution of soil and groundwater. Surfactants using various techniques have been proposed to remedy this kind of contamination. This study presents innovation as the application of different systems containing surfactant in the vapor phase and compares their diesel removal efficiencies of soil containing this contaminant. For this, a system that contains seven injection wells the following vaporized solutions: water, surfactant solution, microemulsion and nanoemulsion, The surfactants used were saponified coconut oil (OCS), in aqueous solution and an ethoxylated alcohol UNTL-90: aqueous solution , and nanoemulsion and microemulsion systems. Among the systems investigated, the nanoemulsion showed the highest efficiency, achieving 88% removal of residual phase diesel, the most ecologically and technically feasible by a system with lower content of active matter

Aplicação do Na2S2O8, H2O2 e ferro na remediação de solos (latossolo e areia destrófica) contaminados com diesel

Environmental liabilities from accidents in the retail petroleum industry, especially in urban areas, have represented a serious problem whose impact reaches the underground, people's health and even economic losses with the remediation process. In U.S.A. are estimated hundreds of billions of dollars invested in soil remediation processes. The results of the reports and investigative reports of liabilities in fuel stations distributed in the urban area of Natal-RN were used to estimate the local scenario of contamination. This database has been possible to determine the main contaminants (BTEX, PAHs, TOC), affected neighborhoods and types of potentially more impacted soils. Experiments were carried out in order to reverse contamination of this scenario, where the soil type was a factor in the planning, because it influences directly on the effectiveness of remediation techniques studied: Oxidation by hydrogen peroxide and oxidation by sodium persulphate. These oxidants are activated forming free radicals (HO•-, SO4 •-, HO2 • , O2 •-, S2O8 -2, etc) responsible for to mineralize the hydrocarbons and other organic compounds (releasing O2 e CO2). In the activation process, the ferrous ions (II) and ferric (III) were studied as well as hydrogen peroxide activation technique with sodium persulfate, the latter being presented the best efficiency among all the study, when activated with Fe+3. In addition to defining the most efficient technique, the aim of this study was to evaluate the influence of different soils among oxidative techniques, characterizing the effect of the concentration of these oxidants and also the concentration of the catalysts. Exists in most scenarios evaluated the presence of intrinsic total iron soil matrix. The so-called latosols present microaggregates reddish indicating the presence of these reactive species like iron and clayey aspect. The kinetic study was conducted by experimental design and monitoring of the percentage of total carbon (SSM-5000A) in the solid and liquid phases, knowing that 82.4% of the diesel molecule is carbon. Yet organic carbon and pH of liquid samples were analyzed for technical, characterizing the influence of soil type and its operating condition. The Fenton-like technique H2O2 e Fe+2 presented satisfactory oxidation, including sandy soil, but well below the best result. The sodium persulphate only activated with temperature, even in the most favorable soil, did not provide good efficiency. The best technique in the study had the concentration profile with 2,2x10- 1mol.L-1 of Na2S2O8 activated with 6,53x10-1mol.L-1 of H2O2 and 2,5x10-2 Fe3+mol.L-1 which reduced in less than a day 96 contamination in red soil, initially with 66,667 mg of diesel per kg of clean soil

Um algoritmo paralelo eficiente de migração reversa no tempo (rtm) 3d com granularidade fina

The reverse time migration algorithm (RTM) has been widely used in the seismic industry to generate images of the underground and thus reduce the risk of oil and gas exploration. Its widespread use is due to its high quality in underground imaging. The RTM is also known for its high computational cost. Therefore, parallel computing techniques have been used in their implementations. In general, parallel approaches for RTM use a coarse granularity by distributing the processing of a subset of seismic shots among nodes of distributed systems. Parallel approaches with coarse granularity for RTM have been shown to be very efficient since the processing of each seismic shot can be performed independently. For this reason, RTM algorithm performance can be considerably improved by using a parallel approach with finer granularity for the processing assigned to each node. This work presents an efficient parallel algorithm for 3D reverse time migration with fine granularity using OpenMP. The propagation algorithm of 3D acoustic wave makes up much of the RTM. Different load balancing were analyzed in order to minimize possible losses parallel performance at this stage. The results served as a basis for the implementation of other phases RTM: backpropagation and imaging condition. The proposed algorithm was tested with synthetic data representing some of the possible underground structures. Metrics such as speedup and efficiency were used to analyze its parallel performance. The migrated sections show that the algorithm obtained satisfactory performance in identifying subsurface structures. As for the parallel performance, the analysis clearly demonstrate the scalability of the algorithm achieving a speedup of 22.46 for the propagation of the wave and 16.95 for the RTM, both with 24 threads.

Globalizing the Sculptural Landscapes of the Sarapis and Isis Cults in Hellenistic and Roman Greece

“Globalizing the Sculptural Landscape of Isis and Sarapis Cults in Roman Greece,” asks questions of cross-cultural exchange and viewership of sculptural assemblages set up in sanctuaries to the Egyptian gods. Focusing on cognitive dissonance, cultural imagining, and manipulations of time and space, I theorize ancient globalization as a set of loosely related processes that shifted a community's connections with place. My case studies range from the 3rd century BCE to the 2nd century CE, including sanctuaries at Rhodes, Thessaloniki, Dion, Marathon, Gortyna, and Delos. At these sites, devotees combined mainstream Greco-Roman sculptures, Egyptian imports, and locally produced imitations of Egyptian artifacts. In the last case, local sculptors represented Egyptian subjects with Greco-Roman naturalistic styles, creating an exoticized visual ideal that had both local and global resonance. My dissertation argues that the sculptural assemblages set up in Egyptian sanctuaries allowed each community to construct complex narratives about the nature of the Egyptian gods. Further, these images participated in a form of globalization that motivated local communities to adopt foreign gods and reinterpret them to suit local needs.

I begin my dissertation by examining how Isis and Sarapis were represented in Greece. My first chapter focuses on single statues of Egyptian gods, describing their iconographies and stylistic tendencies through examples from Corinth and Gortyna. By comparing Greek examples with images of Sarapis, Isis, and Harpokrates from around the Mediterranean, I demonstrate that Greek communities relied on globally available visual tropes rather than creating site or region-specific interpretations. In the next section, I examine what other sources viewers drew upon to inform their experiences of Egyptian sculpture. In Chapter 3, I survey the textual evidence for Isiac cult practice in Greece as a way to reconstruct devotees’ expectations of sculptures in sanctuary contexts. At the core of this analysis are Apuleius’ Metamorphoses and Plutarch’s De Iside et Osiride, which offer a Greek perspective on the cult’s theology. These literary works rely on a tradition of aretalogical inscriptions—long hymns produced from roughly the late 4th century B.C.E. into the 4th century C.E. that describe the expansive syncretistic powers of Isis, Sarapis, and Harpokrates. This chapter argues that the textual evidence suggests that devotees may have expected their images to be especially miraculous and likely to intervene on their behalf, particularly when involved in ritual activity inside the sanctuary.

In the final two chapters, I consider sculptural programs and ritual activity in concert with sanctuary architecture. My fourth chapter focuses on sanctuaries where large amounts of sculpture were found in underground water crypts: Thessaloniki and Rhodes. These groups of statues can be connected to a particular sanctuary space, but their precise display contexts are not known. By reading these images together, I argue that local communities used these globally available images to construct new interpretations of these gods, ones that explored the complex intersections of Egyptian, Greek, and Roman identities in a globalized Mediterranean. My final chapter explores the Egyptian sanctuary at Marathon, a site where exceptional preservation allows us to study how viewers would have experienced images in architectural space. Using the Isiac visuality established in Chapter 3, I reconstruct the viewer's experience, arguing that the patron, Herodes Atticus, intended his viewer to inform his experience with the complex theology of Middle Platonism and prevailing elite attitudes about Roman imperialism.

Throughout my dissertation, I diverge from traditional approaches to culture change that center on the concepts of Romanization and identity. In order to access local experiences of globalization, I examine viewership on a micro-scale. I argue that viewers brought their concerns about culture change into dialogue with elements of cult, social status, art, and text to create new interpretations of Roman sculpture sensitive to the challenges of a highly connected Mediterranean world. In turn, these transcultural perspectives motivated Isiac devotees to create assemblages that combined elements from multiple cultures. These expansive attitudes also inspired Isiac devotees to commission exoticized images that brought together disparate cultures and styles in an eclectic manner that mirrored the haphazard way that travel brought change to the Mediterranean world. My dissertation thus offers a more theoretically rigorous way of modeling culture change in antiquity that recognizes local communities’ agency in producing their cultural landscapes, reconciling some of the problems of scale that have plagued earlier approaches to provincial Roman art.

These case studies demonstrate that cultural anxieties played a key role in how viewers experienced artistic imagery in the Hellenistic and Roman Mediterranean. This dissertation thus offers a new component in our understanding of ancient visuality, and, in turn, a better way to analyze how local communities dealt with the rise of connectivity and globalization.