Australia and New Zealand CBNG development and environmental implications

Following the success of Coalbed Natural Gas (CBNG) operations in the United States, companies in Australia and New Zealand have been actively exploring and developing this technology for the last two decades. In particular, the Bowen and Surat basins in Queensland, Australia, have undergone extensive CBNG development. Unfortunately, awareness of potential environmental problems associated with CBNG abstraction has not been widespread and legislation has at times struggled to keep up with rapid development. In Australia, the combined CBNG resource for both the Bowen and Surat basins has been estimated at approximately 10,500 PJ with gas content as high as 10 m3/tonne of coal. There are no official estimates for the magnitude of the CBNG resource in New Zealand but initial estimates suggest this could be up to 1,300 PJ with gas content ranging from 1 to 5 m3/tonne of coal. In Queensland, depressurization of the Walloon Coal Measures to recover CBNG has the potential to induce drawdown in adjacent deep aquifer systems through intraformational groundwater flow. In addition, CBNG operators have been disposing their co-produced water by using large unlined ponds, which is not the best practice for managing co-produced water. CBNG waters in Queensland have the typical geochemical signature associated with CBNG waters (Van Voast, 2003) and thus have the potential to impair soils and plant growth where land disposal is considered. Water quality from exploration wells in New Zealand exhibit the same characteristics although full scale production has not yet begun. In general, the environmental impacts that could arise from CBNG water extraction depend on the aquifer system, the quantity and quality of produced water, and on the method of treatment and disposal being used. Understanding these impacts is necessary to adequately manage CBNG waters so that environmental effects are minimized; if properly managed, CBNG waters can be used for beneficial applications and can become a valuable resource to stakeholders.

Healthy sexual development : a multidisciplinary framework for research

A group of Australian researchers from a range of disciplines involved in studying children's sexual development developed a framework for researching healthy sexual development that was acceptable to all disciplines involved. The 15 domains identified were: freedom from unwanted activity; an understanding of consent; education about biological aspects; understanding of safety; relationship skills; agency; lifelong learning; resilience; open communication; sexual development should not be “aggressive, coercive or joyless;” self-acceptance; awareness and acceptance that sex is pleasurable; understanding of parental and societal values; awareness of public/private boundaries; and being competent in mediated sexuality.

Development of accident prediction models for rural highway intersections

A study was done to develop macrolevel crash prediction models that can be used to understand and identify effective countermeasures for improving signalized highway intersections and multilane stop-controlled highway intersections in rural areas. Poisson and negative binomial regression models were fit to intersection crash data from Georgia, California, and Michigan. To assess the suitability of the models, several goodness-of-fit measures were computed. The statistical models were then used to shed light on the relationships between crash occurrence and traffic and geometric features of the rural signalized intersections. The results revealed that traffic flow variables significantly affected the overall safety performance of the intersections regardless of intersection type and that the geometric features of intersections varied across intersection type and also influenced crash type.

Dramatic character development personas to tailor apartment designs for different residential lifestyles

This chapter reports on research work that aims to overcome some limitations of conventional community engagement for urban planning. Adaptive and human-centred design approaches that are well established in human-computer interaction (such as personas and design scenarios) as well as creative writing and dramatic character development methods (such as the Stanislavsky System and the Meisner Technique) are yet largely unexplored in the rather conservative and long-term design context of urban planning. Based on these approaches, we have been trialling a set of performance based workshop activities to gain insights into participants’ desires and requirements that may inform the future design of apartments and apartment buildings in inner city Brisbane. The focus of these workshops is to analyse the behaviour and lifestyle of apartment dwellers and generate residential personas that become boundary objects in the cross-disciplinary discussions of urban design and planning teams. Dramatisation and embodied interaction of use cases form part of the strategies we employed to engage participants and elicit community feedback.

Strategising knowledge-based urban development : knowledge city transformations of Brisbane, Australia

In the global knowledge economy, knowledge-intensive industries and knowledge workers are extensively seen as the primary factors to improve the welfare and competitiveness of cities. To attract and retain such industries and workers, cities produce knowledge-based urban development strategies, and therefore such strategising has become an important development mechanism for cities and their economies. The paper discusses the critical connections between knowledge city foundations and integrated knowledge-based urban development mechanisms in both the local and regional level. In particular, the paper investigates Brisbane’s knowledge-based urban development strategies that support gentrification, attraction, and retention of investment and talent. Furthermore, the paper develops a knowledge-based urban development assessment framework to provide a clearer understanding of the local and regional policy frameworks, and relevant applications of Brisbane’s knowledge-based urban development experience, in becoming a prosperous knowledge city. The paper, with its knowledge-based urban development assessment framework, scrutinises Brisbane’s four development domains in detail: economy; society; institutional; built and natural environments. As part of the discussion of the case study findings, the paper describes the global orientation of Brisbane within the frame of regional and local level knowledge-based urban development strategies performing well. Although several good practices from Brisbane have already been internationally acknowledged, the research reveals that Brisbane is still in the early stages of its knowledge-based urban development implementation. Consequently, the development of a monitoring system for all knowledge-based urban development at all levels is highly crucial in accurately measuring the success and failure of specific knowledge-based urban development policies, and Brisbane’s progress towards a knowledge city transformation.

Innovation in construction : a case study of the Australian context

The dominant economic paradigm currently guiding industry policy making in Australia and much of the rest of the world is the neoclassical approach. Although neoclassical theories acknowledge that growth is driven by innovation, such innovation is exogenous to their standard models and hence often not explored. Instead the focus is on the allocation of scarce resources, where innovation is perceived as an external shock to the system. Indeed, analysis of innovation is largely undertaken by other disciplines, such as evolutionary economics and institutional economics. As more has become known about innovation processes, linear models, based on research and development or market demand, have been replaced by more complex interactive models which emphasise the existence of feedback loops between the actors and activities involved in the commercialisation of ideas (Manley 2003). Currently dominant among these approaches is the national or sectoral innovation system model (Breschi and Malerba 2000; Nelson 1993), which is based on the notion of increasingly open innovation systems (Chesbrough, Vanhaverbeke, and West 2008). This chapter reports on the ‘BRITE Survey’ funded by the Cooperative Research Centre for Construction Innovation which investigated the open sectoral innovation system operating in the Australian construction industry. The BRITE Survey was undertaken in 2004 and it is the largest construction innovation survey ever conducted in Australia. The results reported here give an indication of how construction innovation processes operate, as an example that should be of interest to international audiences interested in construction economics. The questionnaire was based on a broad range of indicators recommended in the OECD’s Community Innovation Survey guidelines (OECD/Eurostat 2005). Although the ABS has recently begun to undertake regular innovation surveys that include the construction industry (2006), they employ a very narrow definition of the industry and only collect very basic data compared to that provided by the BRITE Survey, which is presented in this chapter. The term ‘innovation’ is defined here as a new or significantly improved technology or organisational practice, based broadly on OECD definitions (OECD/Eurostat 2005). Innovation may be technological or organisational in nature and it may be new to the world, or just new to the industry or the business concerned. The definition thus includes the simple adoption of existing technological and organisational advancements. The survey collected information about respondents’ perceptions of innovation determinants in the industry, comprising various aspects of business strategy and business environment. It builds on a pilot innovation survey undertaken by PricewaterhouseCoopers (PWC) for the Australian Construction Industry Forum on behalf of the Australian Commonwealth Department of Industry Tourism and Resources, in 2001 (PWC 2002). The survey responds to an identified need within the Australian construction industry to have accurate and timely innovation data upon which to base effective management strategies and public policies (Focus Group 2004).

The Patches program : supporting the development of Malaysian pre-service teachers' academic literacy

The Patches program involves Malaysian pre-service teachers working closely with Australian pre-service teachers on a series of academic and intercultural communication tasks. A recurring problem for international students is the challenge to develop social relationships with Australian students. Similarly, it is often difficult for Australian students to step outside their accustomed social worlds to establish relationships with international students. The Patches Program supported rich cross-cultural social and academic exchanges among the students facilitating the development of students' academic literacy skills, their knowledge of self and knowledge of learning, and their skills in cross-cultural communication.

The significance of owner participation in a successful detached housing development in Malaysia: A literature review

The detached housing scheme is a unique and exclusive segment of the residential property market in Malaysia. Generally, the product is expensive and for many Malaysians who can afford them, owning a detached house is a once in a lifetime opportunity. In spite of this, most of the owners fail to fully comprehend the specific need of this type of housing scheme, increasing the risk of it being a problematic project. Unlike other types of pre-designed ‘mass housing’ schemes, the detached housing scheme may be built specifically to cater the needs and demands of its owner. Therefore, maximum owner participation is vital as the development progresses to guarantee the success of the project. In addition, due to it’s unique design the house would have to individually comply with the requirements and regulations of relevant authorities. Failure of owner to recognise this will result in delays, fines and penalties, disputes and ultimately cost overruns. These circumstances highlight the need for a model to guide the owner through the entire development process of a detached house. Therefore, this research aims to develop a model for a successful detached housing development in Malaysia through maximising owner participation during it’s various development stages. To achieve this, questionnaire surveys and case studies methods shall be employed to acquire the detached housing owners’ experiences in developing their detached houses in Malaysia. Relevant statistical tools shall be applied to analyse the responses. The results gained from this study shall be synthesised into a model of successful detached housing development for the reference of future detached housing owners in Malaysia.

Information and communication technologies : catalysts for sustainable development

The concept of sustainable urban development has been pushed to the forefront of policy-making and politics as the world wakes up to the impacts of climate change and the effects of modern urban lifestyles. Today, sustainable development has become a very prominent element in the day-to-day debate on urban policy and the expression of that policy in urban planning and development decisions. As a result of this, during the last few years, sustainable development automation applications such as sustainable urban development decision support systems have become popular tools as they offer new opportunities for local governments to realise their sustainable development agendas. This chapter explores a range of issues associated with the application of information and communication technologies and decision support systems in the process of underpinning sustainable urban development. The chapter considers how information and communication technologies can be applied to enhance urban planning, raise environmental awareness, share decisions and improve public participation. It introduces and explores three web-based geographical information systems projects as best practice. These systems are developed as support tools to include public opinion in the urban planning and development processes, and to provide planners with comprehensive tools for the analysis of sustainable urban development variants in order to prepare the best plans for constructing sustainable urban communities and futures.

Making space and place for the knowledge economy : knowledge-based development of Australian cities

The impact of what has been broadly labelled the knowledge economy has been such that, even in the absence of precise measurement, it is the undoubted dynamo of today’s global market, and an essential part of any global city. The socio-economic importance of knowledge production in a knowledge economy is clear, and it is an emerging social phenomenon and research agenda in geographical studies. Knowledge production, and where, how and by whom it is produced, is an urban phenomenon that is poorly understood in an era of strong urbanisation. This paper focuses on knowledge community precincts as the catalytic magnet infrastructures impacting on knowledge production in cities. The paper discusses the increasing importance of knowledge-based urban development within the paradigm of the knowledge economy, and the role of knowledge community precincts as instruments to seed the foundation of knowledge production in cities. This paper explores the knowledge based urban development, and particularly knowledge community precinct development, potentials of Sydney, Melbourne and Brisbane, and benchmarks this against that of Boston, Massachusetts.

Sustainable urban and transport development for transportation disadvantaged : a review

Around the world, particularly in North America and Australia, urban sprawl combined with low density suburban development has caused serious accessibility and mobility problems, especially for those who do not own a motor vehicle or have access to public transportation services. Sustainable urban and transportation development is seen crucial in solving transportation disadvantage problems in urban settlements. However, current urban and transportation models have not been adequately addressed unsustainable urban transportation problems that transportation disadvantaged groups overwhelmingly encounter, and the negative impacts on the disadvantaged have not been effectively considered. Transportation disadvantaged is a multi-dimensional problem that combines demographic, spatial and transportation service dimensions. Nevertheless, most transportation models focusing on transportation disadvantage only employ demographic and transportation service dimensions and do not take spatial dimension into account. This paper aims to investigate the link between sustainable urban and transportation development and spatial dimension of the transportation disadvantage problem. The paper, for that purpose, provides a thorough review of the literature and identifies a set of urban, development and policy characteristics to define spatial dimension of the transportation disadvantage problem. This paper presents an overview of these urban, development and policy characteristics that have significant relationships with sustainable urban and transportation development and travel inability, which are also useful in determining transportation disadvantaged populations.

Axial magnetic bearing development for the BiVACOR Rotary BiVAD/TAH

A suspension system for the BiVACOR biventricular assist device (BiVAD) has been developed and tested. The device features two semi-open centrifugal impellers mounted on a common rotating hub. Flow balancing is achieved through the movement of the rotor in the axial direction. The rotor is suspended in the pump casings by an active magnetic suspension system in the axial direction and a passive hydrodynamic bearing in the radial direction. This paper investigates the axial movement capacity of themagnetic bearing system and the power consumption at various operating points. The force capacity of the passive hydrodynamic bearing is investigated using a viscous glycerol solution. Axial rotor movement in the range of ±0.15 mm is confirmed and power consumption is under 15.5 W. The journal bearing is shown to stabilize the rotor in the radial direction at the required operating speed. Magnetic levitation is a viable suspension technique for the impeller of an artificial heart to improve device lifetime and reduce blood damage.

Development of a composite line source emission model for traffic interrupted microenvironments and its application in particle number emissions at a bus station

A composite line source emission (CLSE) model was developed to specifically quantify exposure levels and describe the spatial variability of vehicle emissions in traffic interrupted microenvironments. This model took into account the complexity of vehicle movements in the queue, as well as different emission rates relevant to various driving conditions (cruise, decelerate, idle and accelerate), and it utilised multi-representative segments to capture the accurate emission distribution for real vehicle flow. Hence, this model was able to quickly quantify the time spent in each segment within the considered zone, as well as the composition and position of the requisite segments based on the vehicle fleet information, which not only helped to quantify the enhanced emissions at critical locations, but it also helped to define the emission source distribution of the disrupted steady flow for further dispersion modelling. The model then was applied to estimate particle number emissions at a bi-directional bus station used by diesel and compressed natural gas fuelled buses. It was found that the acceleration distance was of critical importance when estimating particle number emission, since the highest emissions occurred in sections where most of the buses were accelerating and no significant increases were observed at locations where they idled. It was also shown that emissions at the front end of the platform were 43 times greater than at the rear of the platform. Although the CLSE model is intended to be applied in traffic management and transport analysis systems for the evaluation of exposure, as well as the simulation of vehicle emissions in traffic interrupted microenvironments, the bus station model can also be used for the input of initial source definitions in future dispersion models.

Orchestrating knowledge-based urban development : lessons from multimedia super corridor, Malaysia

In the era of knowledge economy, cities and regions have started increasingly investing on their physical, social and knowledge infrastructures so as to foster, attract and retain global talent and investment. Knowledge-based urban development as a new paradigm in urban planning and development is being implemented across the globe in order to increase the competitiveness of cities and regions. This chapter provides an overview of the lessons from Multimedia Super Corridor, Malaysia as one of the first large scale manifestations of knowledge-based urban development in South East Asia. The chapter investigates the application of the knowledge-based urban development concept within the Malaysian context, and, particularly, scrutinises the development and evolution of Multimedia Super Corridor by focusing on strategies, implementation policies, infrastructural implications, and agencies involved in the development and management of the corridor. In the light of the literature and case findings, the chapter provides generic recommendations, on the orchestration of knowledge-based urban development, for other cities and regions seeking such development.

Spatial science news from the School of Urban Development, QUT April, 2010

EDM calibration/comparison at Coombabah,Gold Coast; Survey Staffer wins Vice-Chancellor’s Performance Fund Award; Focus on Surveying Service Teaching; Flexible Spatial Science Minor units; Reminder: Staff and Laboratories moving end of April.