Effects of hand weeding strip and nitrogen fertilizer on corn plants

The objective of the present research was to evaluate effects of different strip weed control associated with nitrogen fertilizer on corn applied after planting. The experiment was set and conducted in Botucatu, São Paulo State, Brazil, and the hybrid planted was Dekalb 333-B. A completely randomized block design with four replications was used. Experimental plots were disposed as a factorial scheme 2 x 2 x 4, constituted by two types of weeding on row (with or without manual hoeing), two types of weeding on inter-row (with or without manual hoeing), and four nitrogen levels applied after planting (00, 60, 90, and 120 kg ha-1). Plots were composed by six rows with 5 m length. Nitrogen fertilizer was applied at 35 days after emergence (d.a.e). For weed community it was evaluated: weed density, dominancy, frequency, and relative importance. The main weed species were: Brachiaria plantiginea, Amaranthus retroflexus, Bidens pilosa, Cyperus rotunds, Brachiaria decumbens, Euphorbia heterofila, Oxalis latifolia, Acanthospermum hispidum, Commelina benghalensis. It was evaluated corn height at 40 and 100 d.a.e., first ear insertion height at 100 d.a.e., and final grain yield at harvesting. Plants and first ear insertion height were affected when nitrogen fertilizer was not applied. Treatments without weed control showed that weed interfered negatively with plants height. There were no correlation between weeds and nitrogen fertilizer for all parameters evaluated. Parcels without weed showed the highest ear weights and final grain production. Treatments that received nitrogen fertilizer, independently of studied arrangement, provided higher yields.

Teores de nutrientes na folha e nos grãos de aveia-preta em função da adubação com fósforo e potássio

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estimation of variance components and prediction of breeding values in rubber tree breeding using the REML/BLUP procedure

The present paper deals with estimation of variance components, prediction of breeding values and selection in a population of rubber tree [Hevea brasiliensis (Willd. ex Adr. de Juss.) Müell.-Arg.] from Rio Branco, State of Acre, Brazil. The REML/BLUP (restricted maximum likelihood/best linear unbiased prediction) procedure was applied. For this purpose, 37 rubber tree families were obtained and assessed in a randomized complete block design, with three unbalanced replications. The field trial was carried out at the Experimental Station of UNESP, located in Selvíria, State of Mato Grosso do Sul, Brazil. The quantitative traits evaluated were: girth (G), bark thickness (BT), number of latex vessel rings (NR), and plant height (PH). Given the unbalanced condition of the progeny test, the REML/BLUP procedure was used for estimation. The narrow-sense individual heritability estimates were 0.43 for G, 0.18 for BT, 0.01 for NR, and 0.51 for PH. Two selection strategies were adopted: one short-term (ST - selection intensity of 8.85%) and the other long-term (LT - selection intensity of 26.56%). For G, the estimated genetic gains in relation to the population average were 26.80% and 17.94%, respectively, according to the ST and LT strategies. The effective population sizes were 22.35 and 46.03, respectively. The LT and ST strategies maintained 45.80% and 28.24%, respectively, of the original genetic diversity represented in the progeny test. So, it can be inferred that this population has potential for both breeding and ex situ genetic conservation as a supplier of genetic material for advanced rubber tree breeding programs. Copyright by the Brazilian Society of Genetics.

Productivity of cherry tomatoes under protected cultivation carried out with different types of pruning and spacing

The aim of the study was to evaluate production and determine the level of total soluble solids for cherry tomatoes, under protected cultivation carried out with different types of spacing and pruning. The experiment was performed according to a randomized block design in a 2×2 factorial scheme, with two types of spacing between plants and two types of pruning, and with five repetitions. The cultivar 'Sindy' (De Ruiter) was utilized. Each experimental parcel contained seven plants, and fruits were collected from the five central plants. The seedlings were produced in Styrofoam trays of 128 cells and transplanted at 33 days after planting using two types of spacing between plants (0.3 and 0.5 m) and 1 m spacing between rows. The plants were grown as single-or double-stem form and staked individually. The parameters evaluated were the number of fruit per plant, fresh weight of fruit and the level of total soluble solids expressed in °Brix. There was no evidence of significant interaction between the treatments. For fresh weight of fruit per plant, there was a significant effect when the plants were grown with a spacing of 1 × 0.5 m, with 4.12 kg per plant, compared to a production of 3.00 kg per plant with a spacing of 1 × 0.3 m. With regard to the number of fruit per plant, a significant difference was seen between the two types of spacing, where a spacing of 1 × 0.3 m yielded a lower number of fruit per plant (188.8), compared to that observed with a spacing of 1 × 0.5 m (238.1). With regard to the two types of pruning, there was a significant effect for only the number of fruit per plant, where the mean number of fruit was 188.4 with one stem and 238.4 with two stems. No significant difference was observed between the treatments for the level of total soluble solids. It is concluded that for the cultivar 'Sindy', under protected cultivation, production is better with a spacing of 0.5 m between plants and the use of two stems per plant.

Comparación de tres métodos para estimar estabilidad del rendimiento en nueve variedades de algodón

With the purpose of selecting and recommending promissory cultivars of cotton, Gossypium hirsutum (L) with high yield potential and stability, for crop areas in Venezuela, the yield (seed included) of nine cotton varieties was evaluated. The data from the 1995-96 and 1996-97 cycles was used. The experimental design was a randomized completed block design with four repetitions on twelve environments. Parameters of stability offered by the methods of Eberhart and Russell, (1966), Cruz et al. (1989) and the AMMI model were estimated and compared to determine the best method or combination. There was no coincidence between the best yield varieties, Unellez-2 and the commercial variety Delta Pine 16, in relation to stability criteria. According to Eberhart and Russell, these were classified as stable, while according to Cruz et al. they were adaptive to favorable environments and according to AMMI they were unstable with high interaction,.Of the three methods studied, the AMMI model allowed associating the response of high yield varieties to specific environments, gave more information and was easier to interpret.

Avaliação de genótipos de soja em semeadura de inverno, em Selvíria, MS: Produção e qualidade fisiológica de sementes

The sowing of soybean out of the conventional period is an option for the production of seeds with high physiological quality. On the other hand, this fact makes necessary the search for cultivars adapted to new environmental conditions. Therefore, additional research is needed to supply more information to producers related to the choice of the most suited cultivars with regard to high seed quality. This research was conducted in Selvíria, MS, Brazil in which the cultivars FT-2000, FT-Inaê, Embrapa 20 (Doko RC), CAC-1, IAC-17, IAC-18, IAC-19, IAC-8-2, FT-101, FT-109, MT/ BR 45 (Paiaguás), MT/BR 50 (Parecis), MT/BR 52 (Curió), MT/BR 53 (Tucano), MT/BR 47 (Canário), MT/BR 49 (Pioneira), BRSMT Uirapuru, BR Emgopa 314 (Garça Branca), MG/BR 46 (Conquista), FT-Estrela, FT-Cometa, Dourados, JAB-11, BR 9 (Savana), FT-Abyara, Embrapa 30 (Vale do Rio Doce), Embrapa 9 (Bays), Embrapa 31 (Mina), IAC-16; IAS 5, EMGOPA-304, and IAC-Foscarin 31 were studied. These cultivars were sown on June 5, 1998, and evaluated both for agronomic characteristics and the physiological potential of the seeds. The experimental units were arranged in the field according to a randomized complete block design with five replicates. The cultivars more adapted to the climatic conditions were Parecis, Bays, CAC-1, Garça Branca, Paiaguás, Pioneira, and IAC-16. It was concluded that winter sowing should start at the beginning of May, with water supply, since June was found to be too late.

High temperature tolerance of determinate tomatoes in Brazil

The experiment was conducted in the experimental area belonging to the Section of Crop Production and Aromatic Medicinal Plants of the FCAV-UNESP, Jaboticabal Campus - Sao Paulo, Brazil. Tolerance to high temperature was studied in six determinate genotypes of tomato (Lycopersicon esculentum L.): Agrocica 8, Apex 1000, Botu-13, Calmech VFAS, Nemadoro and Jab-2, which were cultivated in a greenhouse at temperatures above 33oC for at least 2 h/day during blooming. The objectives of the study were to identify the genetic diversity of the genotypes studied and to determine their performance associated with tolerance to high temperature. Dissimilarity was determined by the generalized Mahalanobis distance. Delineation groups were optimized with the Tocher technique. A random block design was utilized with six treatments and with three replications. Two similarity groups were identified: 1 - Apex 1000, Botu-13, Calmech VFAS, Jab-2, Nemadoro and 2 - Agrocica 8. Crossing of genotypes within one group has no advantage because little genetic divergence and no heterotic response would be expected. However, the crossing of genotypes between groups is suggested. Knowledge of these groups will be important for efficiency future breeding efforts.

High temperature tolerance of indeterminate tomatoes in Brazil

The study was conducted at the Section of Crop Production and Aromatic Medicinal Plants of FCAV-UNESP, Jaboticabal Campus - Sao Paulo, Brazil. Nine indeterminate tomato (Lycopersicon esculentum Mill.) genotypes, Jumbo, Santa Clara, Cláudia VF, Concorde, Débora Plus, FM-9, Carmen, Príncipe Gigante, and CL 5915, were evaluated for high temperature tolerance. Three determinate tomato genotypes, FM-9, Suncoast and TSW-10, were cultivated in a greenhouse at more than 33°C air temperature for at least 2 h/day during bloom. The objective was to identify variable genotypes to determine their tolerance of high temperature. Four replications of fifteen treatments were planted in a randomized block design. Dissimilarity was determined by the generalized Mahalanobis distance. Delineation groups were optimized with the Tocher technique. The tomatoes were classified into six groups of similar temperature responses. CL 5915 was the most tolerant of high temperatures. Crossing of genotypes within one group has no advantage because little genetic divergence and no heterotic response would be expected. However, the crossing of genotypes between groups is suggested. Knowledge of these groups will be important for efficient future breeding efforts.

Performance of 19-year-old provenances of Liquidambar styraciflua in Paraguaçu Paulista, São Paulo

The genetic variation in the growth of seven 19-year-old Liquidambar styraciflua provenances was studied in Paraguaçu Paulista, São Paulo State, Brazil. The trial was established in a complete randomized block design with seven provenances, four replications and twelve-tree square plots. Significant differences among provenances were detected for diameter at breast height, height and volume, indicating the possibility of increasing timber yield through selection of the most productive provenances. Genetic correlations between growth traits were high and statistically significant. The provenance from Finca las Victorias, Guatemala had the best and the provenance from Franklin, Virginia, United States the poorest performance for all traits. A growth comparison of Pinus caribaea var. bahamensis with the best provenance at the same site indicated that the potential of L. styraciflua for silviculture in the region of Paraguaçu Paulista is high.

Acúmulo de sacarose, produtividade e florescimento de cana-de-açúcar sob reguladores vegetais

Plant regulators have been used successfully for early ripening and flowering control in sugarcane (Saccharum spp. Hybrid). However, little information is available about the interactions between new genotypes and two plant regulators with regard to those variables. This study determined the effect of the regulators on the sucrose content, stalk production and flowering of seven sugarcane genotypes. The experiment was installed in March 2004 near Ja-, SP, Brazil A randomized complete block design was used with four blocks with a split plot treatment arrangement where the main plots were the genotypes IAC87-3396, IAC87-3410, IAC89-3124, IAC91-2195, 1AC91-5155, P088-62 and SP80-1842 and the subplots were sulfomethuron-methyl (15g i.a.·ha -1), etefon (480g i.a.·ha-1) and unsprayed control. Pol in cane was evaluated at 0, 21, 42, 63, 84, 105 and 126 days after the plant regulators application (DAA). Flowering, pith, stalk production and sucrose content were evaluated at 126 DAA. In most of the genotypes the use of plant regulators anticipated maturation in 21 days when compared with the unsprayed control. Etefon was more efficient for harvesting sugarcane between 42-84 DAA, whereas sulfomethuron-methyl was between 105 and 126 DDA. Both products controlled flowering. For most genotypes, the ripeners did not affect the productivity of stalks, except for sulfomethuron-methyl that reduced it in SP80-1842, and for ethephon that increased it in IAC91-2195. Sugar productivity of IAC89-3124 increased with both regulators, while it was higher in IAC91-2195 with ethephon application and lower in SP80-1842 with sulfomethuron-methyl use.

Performance of different genotypes of vegetable soybeans in Jaboticabal-SP

The study was conducted in the field, in the experimental area of the Section of Crop Production and Aromatic Medicinal Plants, belonging to the Faculty of Agricultural and Veterinary Sciences, Jaboticabal Campus-SP. The aim of the study was to assess the performance of seven genotypes of vegetable soybeans in Jaboticabal-SP. The experiment was carried out in a complete randomized block design with seven treatments (genotypes) and four replications. The genotypes examined were: CNPSOI, JLM003, JLM010, JLM018, JLM019, JLM024 and BRS216. The seeds were obtained from EMBRAPA-Soja and EMBRAPA- Hortaliças, and planted in Styrofoam trays with 128 cells containing Plantmax Hortaliças® as substrate. Transplanting occurred 10 d after seeding when the seedlings showed 2 or 3 definitive leaves and about 12 cm in height, demonstrating that the soil had been properly prepared according to the recommendations for this crop. Pests and diseases were adequately controlled in the event of their occurrence in the experimental area and in accordance with technical recommendations for the chemical products utilized. Collections were carried out based on the maturation of the pods, according to the scale of Fehr and Caviness (1977) adapted by Costa and Marchezan (1982), when the pods reached the reproductive stage R6. The parameters determined were mean precocity, height of the first pod, mean number of pods per plant, mean number of seeds per pod, fresh weight of 100 seeds and total yield of immature grains. Based on the results obtained, the genotypes JLM003 and JLM010 were found to be most indicated for growing vegetable soybeans, because of their capacity to produce immature grains of 1090 and 848 g·m-2, respectively, and fresh weights for 100 seeds of 62.20 and 68.19 g, respectively.

Parâmetros fisiológicos de cultivares de cevada sob déficits hídricos

The objective of this study was to evaluate some physiological parameters in six barley cultivars (Borema, Lagoa, BRS-180, BRS-195, EMB-128 e BRS-225), under water stress in different crop phenological phases. The treatments were as follows: TI - pots constantly irrigated until harvest: T2: - water stress starting from 45 days after sowing (DAS) and T3 - water stress starting from 65 DAS. Leaf resistance to water vapor diffusion (Rs), relative water content (RWC), and leaf water potential (Ψ1) were used to evaluate drought tolerance. Pots were arranged in a randomized block design with four blocks, six barley cultivars, and three treatments, in a total of seventy two pots. The experiment was conducted from August to November 2005 in a polyethylene greenhouse located at the experimental area of Rural Engineering Department - FCA, UNESP - Botucatu - SP. The results showed that all barley cultivars presented some adaptation to water stress, but EMB-128 was the most likely and BRS-180 the least likely to be drought tolerant. The results revealed that only one drought cycle may increase tolerance to drought.

Propriedades químicas de um latossolo vermelho de cerrado cultivado com algodão sob diferentes preparos e adubações

The high rate of mineralization of organic matter on savannah soils, which is reached fi ve times faster than in temperate regions, leads us to the challenge of electing the best system of management that maintains and/or increase it in soil, guaranteeing its quality and sustainability. In this sense the present research aimed to study the effects of green, organic and mineral manure on the chemical properties on the chemical properties of an Oxisol, on Savannah area, cultivated with cotton (Gossypium hirsutum) under conventional tillage and no-tillage in the pasture fi eld (Brachiaria decumbens) for 20 years. The experimental design was a randomized block design with split plots. The main plots consisted of two treatments: conventional tillage and no-tillage, and the subplots of six treatments: control (no fertilizer), mineral fertilizer recommended for the crop, according to the soil chemical analysis, organic fertilizer (cattle manure - 20 t ha-1), organic fertilizer (cattle manure - 20 t ha-1) + 1/2mineral fertilization recommended according to the analysis of soil, green manure-1 (Crotalaria juncea) and green manure-2 (Pennisetum americanum). There were studied the following soil chemical properties: P, OM, pH, K, Ca, Mg, Al, Al + H, S, exchange capacity cations and base saturation. The soil samples for the analysis were performed on layers of 0,00-0,05 m, 0,05-0,10 and 0,10-0,20 m. Then it came the following conclusions: the fertilization interfere in soil chemical properties and the preparation did not interfere, the cattle manure and its association with the mineral fertilizer caused increasing level elements in the soil, Crotalaria juncea and Pennisetum americanum did not infl uence on soil chemical properties.

Soluções nutritivas no desenvolvimento do crisântemo cultivado em vaso

Although the information about nutritive solution for potted chrysanthemum is still incongruent, the objective of this work was to evaluate the effect of nutritive solutions in the development of Miramar chrysanthemum cultivated in pots at FCAV-UNESP, Jaboticabal-SP. The experiment had a randomized block design with split-plot evaluation and treatments corresponding to four nutritive solutions consisting of commercial fertilizers (S1, S2, S3, S4) evaluated at 0, 14, 28, 42, 56 and 70 days after rooting (DAE), with five replications. The plant height, leaf area, number of leaves, stem diameter, total dry matter mass of aerial part and roots; number and diameter of inflorescences, and physiological indexes of growth analysis were evaluated. The nutritive solutions did not interfere significantly in stem diameter, number and diameter of inflorescences and dry matter of roots, although S3 and S4 provided the highest plants, leaf area, number of leaves, total dry matter of aerial part. The physiological indexes showed that plants presented an accelerated growth from 14 to 28 DAE with S4 and S3 solutions and therefore they were considered the best solutions.

Interferěncia da comunidade infestante sobre plantas de Eucalyptus grandis de segundo corte

Currently Brazil is one of the leading paper and pulp producers in the world market, where Sao Paulo State boasts the greatest production. Because of the pulp prices falling in the world market and the low costs of a second coppice rotation, two experiments (started May and December, 2000) were conducted to evaluate the effects of weeds and of weed-free periods (0, 3, 6, 9, 12, 15 and 18 months) on the growth of Eucalyptus grandis second coppice plants. The field trials were set up in a randomized block design with four replicates and the experimental plots consisted of three rows of fve plants. The December weed community was composed mainly of Brachiaria decumbens (Surinam grass) and Panicum maximum (Guinea grass) and the May weed community was composed mainly by B. decumbens and Digitaria insularis (Sour-grass). Weeds had a low negative influence on growth, diameter development and macronutrients content of E. grandis second coppice plants. In both experiments, slight reductions in growth were observed only between the fully weeded and weed-free periods, after 18 months.