Treatment of lung infection in patients with cystic fibrosis:Current and future strategies

In patients with cystic fibrosis (CF) lung damage secondary to chronic infection is the main cause of death. Treatment of lung disease to reduce the impact of infection, inflammation and subsequent lung injury is therefore of major importance. Here we discuss the present status of antibiotic therapy for the major pathogens in CF airways, including prophylaxis against infection, eradication of early infection, suppression of chronic infection, and the treatment of infective exacerbations. We outline measures to optimize maintenance treatment for infection in the light of novel antibiotic drug formulations. We discuss new developments in culture-independent microbiological diagnostic techniques and the use of tools for monitoring the success of antibiotic treatment courses. Finally, cost-effectiveness analyses for antibiotic treatment in CF patients are discussed.

Digoxin toxicity in the aged. Characterising and avoiding the problem

Digoxin is one of the most frequently prescribed drugs, particularly in the elderly population where there is an increased prevalence of atrial fibrillation and cardiac failure. The drug has a narrow therapeutic range and has gained a reputation for producing adverse effects in older patients. The more frail elderly patients with coexistent disease, often taking other treatments, are more at risk from digoxin toxicity due to inappropriate dosing, noncompliance, or increased sensitivity to digoxin resulting from pharmacokinetic or pharmacodynamic interactions. Application of basic pharmacological principles may be helpful in anticipating these problems. Elderly patients more commonly receive digoxin than younger patients, which in part accounts for the higher rates of toxicity in this group. Numerous components contribute to the development of toxicity, and diagnosis of toxicity is difficult in this age group. The measurement of serum concentrations can contribute to the clinical diagnosis. A major problem is the accurate diagnosis of digoxin toxicity which may have numerous nonspecific clinical manifestations, many of which are related to coexisting disease in elderly patients. This diagnostic imprecision is well recognised but has been helped by the introduction of serum digoxin measurement. However, reliance on serum concentrations should not replace clinical judgement, since these do not always correlate with toxicity. The apparently decreasing incidence of toxicity over recent years probably reflects several factors: the improvement in digoxin formulations, awareness of digoxin pharmacology, utilisation of serum concentrations, and the realisation that digoxin withdrawal is a viable proposition in elderly patients. Greater knowledge about the causes and prevention of digoxin toxicity should further reduce the morbidity and mortality arising from digoxin overdose, especially in the elderly population.

Analysis of nine NSAIDs in ungulate tissues available to critically endangered vultures in India

In 2006, India, Pakistan, and Nepal banned the manufacture of veterinary formulations of the nonsteroidal anti-inflammatory drug (NSAID) diclofenac. This action was taken to halt the unprecedented decline of three Gyps vulture species that were being poisoned by diclofenac residues commonly present in carcasses of domestic livestock upon which they scavenged. To assess the affect of this ban and evaluate residue prevelances of other NSAIDs, we present a method to detect diclofenac and eight more NSAIDs by liquid chromatography-mass spectrometry and apply this to 1488 liver samples from carcasses of livestock taken across seven Indian states. Diclofenac was present in 11.1% of samples taken between April and December 2006, and meloxicam (4%), ibuprofen (0.6%), and ketoprofen (0.5%) were also detected. Although meloxicam is safe for a range of avian scavengers, including Gypsvultures, data regarding the safety of other NSAIDs is currently limited. If wild Gyps on the Indian subcontinent are to survive, diclofenac bans must be completely effective, and NSAIDs that replace it within the veterinary drug market must be of low toxicity toward Gyps and other scavenging birds.

Computation of stress intensity factors in functionally graded materials using partition-of-unity meshfee method

This paper describes the computation of stress intensity factors (SIFs) for cracks in functionally graded materials (FGMs) using an extended element-free Galerkin (XEFG) method. The SIFs are extracted through the crack closure integral (CCI) with a local smoothing technique, non-equilibrium and incompatibility formulations of the interaction integral and the displacement method. The results for mode I and mixed mode case studies are presented and compared with those available in the literature. They are found to be in good agreement where the average absolute error for the CCI with local smoothing, despite its simplicity, yielded a high level of accuracy.

High-efficiency low-voltage-stress Class-EF PA with extended maximum operating frequency

The Class-EF power amplifier (PA) introduced recently has a peak switch voltage much lower than the well-known Class-E PA. However, the value of the transistor output capacitance at high frequencies is typically larger than the required Class-EF optimum shunt capacitance. As a result, softswitching operation that minimizes power dissipation during OFF-to-ON transient cannot be achieved at high frequencies. A novel Class-EF topology with transmission-line load network proposed in this paper allows the PA to operate at much higher frequencies without trading the other figures of merit. Closed-form formulations are derived to simultaneously satisfy the Class-EF impedances requirement at fundamental frequency, all even harmonics, and the first two odd harmonics as well as to provide matching to 50O load. © 2011 Institut fur Mikrowellen.

Assessment of rolling resistance models in discrete element simulations

Particulate systems are of interest in many disciplines. They are often investigated using the discrete element method because of its capability to investigate particulate systems at the individual particle scale. To model the interaction between two particles and between a particle and a boundary, conventional discrete element models use springs and dampers in both the normal and tangential directions. The significance of particle rotation has been highlighted in both numerical studies and physical experiments. Several researchers have attempted to incorporate a rotational torque to account for the rolling resistance or rolling friction by developing different models. This paper presents a review of the commonly used models for rolling resistance and proposes a more general model. These models are classified into four categories according to their key characteristics. The robustness of these models in reproducing rolling resistance effects arising from different physical situations was assessed by using several benchmarking test cases. The proposed model can be seen to be more general and suitable for modelling problems involving both dynamic and pseudo-static regimes. An example simulation of the formation of a 2D sandpile is also shown. For simplicity, all formulations and examples are presented in 2D form, though the general conclusions are also applicable to 3D systems.

Anthelmintic resistance in Northern Ireland (II): Variations in nematode control practices between lowland and upland sheep flocks

A questionnaire to obtain information on nematode control practices and sheep management was sent to over 1000 farmers in Northern Ireland. Replies were received from 305 flock owners, and data from 252 of them were analysed. Farms were divided into lowland and upland areas. Sizes of pasture and stocking rates on lowland and upland farms were 59.5 hectares, 6.99 sheep/hectare and 62.9 hectares and 10.01 sheep/hectare, respectively. Mean drenching rates for lambs and adults were 2.33 and 2.44, respectively, in lowland flocks and 2.73 and 2.71, respectively, in upland flocks. Between 2008 and 2011, the most frequently identified compounds in use were benzimidazoles and moxidectin in lowland flocks, and benzimidazoles and avermectins in upland flocks. Over the same period the most frequently identified commercial formulations were Tramazole (R), Panacur (R) and Allverm (R) (white drench), Levacide (R) (yellow drench), Oramec (R) (clear drench; avermectin), Cydectin (R) (clear drench; moxidectin) and Monepantel (R) (orange drench).

Most respondents (56.35%) treated their lambs at weaning and the most common time to treat ewes was identified to be pre-mating (67.86% of respondents).

The results of the questionnaire survey revealed that lowland annual drench frequency was 233 and 2.44 in lambs and ewes, respectively, although drench frequencies were higher in upland flocks: 2.73 and 2.71 for lambs and ewes, respectively.

Annual drench rotation was practiced by 43.96% of flock owners, but whether this was true rotation or pseudo-rotation (i.e., substitution of one anthelmintic product by another product belonging to the same chemical group of anthelmintics) could not be explicitly determined. (C) 2012 Elsevier B.V. All rights reserved.

Efficacy of Biocides Used in the Modern Food Industry To Control Salmonella enterica, and Links between Biocide Tolerance and Resistance to Clinically Relevant Antimicrobial Compounds

Biocides play an essential role in limiting the spread of infectious disease. The food industry is dependent on these agents, and their increasing use is a matter for concern. Specifically, the emergence of bacteria demonstrating increased tolerance to biocides, coupled with the potential for the development of a phenotype of cross-resistance to clinically important antimicrobial compounds, needs to be assessed. In this study, we investigated the tolerance of a collection of susceptible and multidrug-resistant (MDR) Salmonella enterica strains to a panel of seven commercially available food-grade biocide formulations. We explored their abilities to adapt to these formulations and their active biocidal agents, i.e., triclosan, chlorhexidine, hydrogen peroxide, and benzalkonium chloride, after sequential rounds of in vitro selection. Finally, cross-tolerance of different categories of biocidal formulations, their active agents, and the potential for coselection of resistance to clinically important antibiotics were investigated. Six of seven food-grade biocide formulations were bactericidal at their recommended working concentrations. All showed a reduced activity against both surface-dried and biofilm cultures. A stable phenotype of tolerance to biocide formulations could not be selected. Upon exposure of Salmonella strains to an active biocidal compound, a high-level of tolerance was selected for a number of Salmonella serotypes. No cross-tolerance to the different biocidal agents or food-grade biocide formulations was observed. Most tolerant isolates displayed changes in their patterns of susceptibility to antimicrobial compounds. Food industry biocides are effective against planktonic Salmonella. When exposed to sublethal concentrations of individual active biocidal agents, tolerant isolates may emerge. This emergence was associated with changes in antimicrobial susceptibilities.

The effect of polymer coatings on physicochemical properties of spray-dried liposomes for nasal delivery of BSA

This work describes the development of spray dried polymer coated liposomes composed of soy phosphatidylcholine (SPC) and phospholipid dimyristoyl phosphatidylglycerol (DMPG) coated with alginate, chitosan or trimethyl chitosan (TMC), that are able to penetrate through the nasal mucosa and offer enhanced penetration over uncoated liposomes when delivered as a dry powder. All the liposome formulations, loaded with BSA as model antigen, were spray-dried to obtain powder size and liposome size in a suitable range for nasal delivery. Although coating resulted in some reduction in encapsulation efficiency, levels were still maintained between 60% and 69% and the structural integrity of the entrapped protein and its release characteristics were maintained. Coating with TMC gave the best product characteristics in terms of entrapment efficiency, glass transition (Tg) and mucoadhesive strength, while penetration of nasal mucosal tissue was very encouraging when these liposomes were administered as dispersions although improved results were observed for the dry powders

Physical characterisation and component release of poly(vinyl alcohol)-tetrahydroxyborate hydrogels and their applicability as potential topical drug delivery systems

Poly(vinyl alcohol)-tetrahydroxyborate (PVA-THB) hydrogels are dilatant formulations with potential for topical wound management. To support this contention, the physical properties, rheological behaviour and component release of candidate formulations were investigated. Oscillatory rheometry and texture profile analysis were used at room temperature and 37 °C. Results showed that it was possible to control the rheological and textural properties by altering component concentration and modifying the type of PVA polymer used. Hydrogels made using PVA grades with higher degrees of hydrolysis displayed favourable characteristics from a wound healing perspective. In vitro release of borate and PVA were assessed in order to evaluate potential clinical dosing of free species originating from the hydrogel structure. Component diffusion was influenced by both concentration and molecular weight, where relevant, with up to 5% free PVA cumulative release observed after 30 min. The results of this study demonstrated the importance of poly(vinyl alcohol) selection for ensuring appropriate gel formation in PVA-THB hydrogels. The benefits of higher degrees of hydrolysis, in particular, included lower excipient release and reduced bioadhesion. The unique physical characteristics of these hydrogels make them an appealing delivery vehicle for chronic and acute wound management purposes.

Nakagami-m Phase Model: Further Results and Validation

This paper contributes to and expands on the Nakagami-m phase model. It derives exact, closed-form expressions for both the phase cumulative distribution function and its inverse. In addition, empirical first- and second-order statistics obtained from measurements conducted in a body-area network scenario were used to fit the phase probability density function, the phase cumulative distribution function, and the phase crossing rate expressions. Remarkably, the unlikely shapes of the phase statistics, as predicted by the theoretical formulations, are actually encountered in practice.

The future of antimicrobial therapy in the era of antibiotic resistance in cystic fibrosis pulmonary infection

Cystic fibrosis (CF) is characterised by chronic polymicrobial airway infection and inflammation, which is the major cause of morbidity and mortality. Aggressive use of antimicrobials has been fundamental in increasing the life expectancy of CF patients in recent years. However, enhanced culture and non-culture based detection methods have identified bacteria in the CF lung not previously isolated from CF patients by routine diagnostic microbiology Coupled with increasing antimicrobial resistance, the future of antimicrobial therapy in CF respiratory infection remains challenging. New strategies are needed to address these problems and ensure improvements in life expectancy are maintained. Potential future strategies include the use of new antimicrobial agents and formulations currently in clinical trials, alternative methods of selecting appropriate therapeutic regimens, determination of the pathogenicity of species newly associated with CF and the development of new antimicrobials and adjuvants for use in clinical practice.

Hydrogel-forming microneedle arrays exhibit antimicrobial properties:potential for enhanced patient safety

We describe, for the first time, the microbial characterisation of hydrogel-forming polymeric microneedle arrays and the potential for passage of microorganisms into skin following microneedle penetration. Uniquely, we also present insights into the storage stability of these hydroscopic formulations, from physical and microbiological viewpoints, and examine clinical performance and safety in human volunteers. Experiments employing excised porcine skin and radiolabelled microorganisms showed that microorganisms can penetrate skin beyond the stratum corneum following microneedle puncture. Indeed, the numbers of microorganisms crossing the stratum corneum following microneedle puncture were greater than 105 cfu in each case. However, no microorganisms crossed the epidermal skin. When using a 21G hypodermic needle, more than 104 microorganisms penetrated into the viable tissue and 106 cfu of Candida albicans and Staphylococcus epidermidis completely crossed the epidermal skin in 24 h. The hydrogel-forming materials contained no microorganisms following de-moulding and exhibited no microbial growth during storage, while also maintaining their mechanical strength, apart from when stored at relative humidities of 86%. No microbial penetration through the swelling microneedles was detectable, while human volunteer studies confirmed that skin or systemic infection is highly unlikely when polymeric microneedles are used for transdermal drug delivery. Since no pharmacopoeial standards currently exist for microneedle-based products, the exact requirements for a proprietary product based on hydrogel-forming microneedles are at present unclear. However, we are currently working towards a comprehensive specification set for this microneedle system that may inform future developments in this regard.

Physical and numerical constraints in source modeling for finite difference simulation of room acoustics

In finite difference time domain simulation of room acoustics, source functions are subject to various constraints. These depend on the way sources are injected into the grid and on the chosen parameters of the numerical scheme being used. This paper addresses the issue of selecting and designing sources for finite difference simulation, by first reviewing associated aims and constraints, and evaluating existing source models against these criteria. The process of exciting a model is generalized by introducing a system of three cascaded filters, respectively, characterizing the driving pulse, the source mechanics, and the injection of the resulting source function into the grid. It is shown that hard, soft, and transparent sources can be seen as special cases within this unified approach. Starting from the mechanics of a small pulsating sphere, a parametric source model is formulated by specifying suitable filters. This physically constrained source model is numerically consistent, does not scatter incoming waves, and is free from zero- and low-frequency artifacts. Simulation results are employed for comparison with existing source formulations in terms of meeting the spectral and temporal requirements on the outward propagating wave.

Assessing parenting capacity in child protection: towards a knowledge-based model

The assessment of parenting capacity continues to engender public concern in cases of suspected harm to children. This paper outlines a model for approaching this task based on the application of three key domains of knowledge in social work relating to facts, theory and practice wisdom. The McMaster Model of Family Assessment is identified out of this process and reworked to give it a sharper focus on parenting roles and responsibilities. Seven formative dimensions of parenting are then elicited and combined with an analytical process of identifying strengths, concerns, prospects for growth and impact on child outcomes. The resulting assessment framework, it is argued, adds rigour to professional judgements about parenting capacity and enhances formulations on risk in child protection.