Techniques for Enhancing Wind Energy Generation - A CFD Based Multibody Dynamics Approach in Horizontal Axis Wind Turbines

Wind energy has emerged as a major sustainable source of energy.The efficiency of wind power generation by wind mills has improved a lot during the last three decades.There is still further scope for maximising the conversion of wind energy into mechanical energy.In this context,the wind turbine rotor dynamics has great significance.The present work aims at a comprehensive study of the Horizontal Axis Wind Turbine (HAWT) aerodynamics by numerically solving the fluid dynamic equations with the help of a finite-volume Navier-Stokes CFD solver.As a more general goal,the study aims at providing the capabilities of modern numerical techniques for the complex fluid dynamic problems of HAWT.The main purpose is hence to maximize the physics of power extraction by wind turbines.This research demonstrates the potential of an incompressible Navier-Stokes CFD method for the aerodynamic power performance analysis of horizontal axis wind turbine.The National Renewable Energy Laboratory USA-NREL (Technical Report NREL/Cp-500-28589) had carried out an experimental work aimed at the real time performance prediction of horizontal axis wind turbine.In addition to a comparison between the results reported by NREL made and CFD simulations,comparisons are made for the local flow angle at several stations ahead of the wind turbine blades.The comparison has shown that fairly good predictions can be made for pressure distribution and torque.Subsequently, the wind-field effects on the blade aerodynamics,as well as the blade/tower interaction,were investigated.The selected case corresponded to a 12.5 m/s up-wind HAWT at zero degree of yaw angle and a rotational speed of 25 rpm.The results obtained suggest that the present can cope well with the flows encountered around wind turbines.The areodynamic performance of the turbine and the flow details near and off the turbine blades and tower can be analysed using theses results.The aerodynamic performance of airfoils differs from one another.The performance mainly depends on co-efficient of performnace,co-efficient of lift,co-efficient of drag, velocity of fluid and angle of attack.This study shows that the velocity is not constant for all angles of attack of different airfoils.The performance parameters are calculated analytically and are compared with the standardized performance tests.For different angles of ,the velocity stall is determined for the better performance of a system with respect to velocity.The research addresses the effect of surface roughness factor on the blade surface at various sections.The numerical results were found to be in agreement with the experimental data.A relative advantage of the theoretical aerofoil design method is that it allows many different concepts to be explored economically.Such efforts are generally impractical in wind tunnels because of time and money constraints.Thus, the need for a theoretical aerofoil design method is threefold:first for the design of aerofoil that fall outside the range of applicability of existing calalogs:second,for the design of aerofoil that more exactly match the requirements of the intended application:and third,for the economic exploration of many aerofoil concepts.From the results obtained for the different aerofoils,the velocity is not constant for all angles of attack.The results obtained for the aerofoil mainly depend on angle of attack and velocity.The vortex generator technique was meticulously studies with the formulation of the specification for the right angle shaped vortex generators-VG.The results were validated in accordance with the primary analysis phase.The results were found to be in good agreement with the power curve.The introduction of correct size VGs at appropriate locations over the blades of the selected HAWT was found to increase the power generation by about 4%

Qualitative Air Flow Modelling and Analysis of Data Centre Air Conditioning as Multiple Jet Array

Data centre is a centralized repository,either physical or virtual,for the storage,management and dissemination of data and information organized around a particular body and nerve centre of the present IT revolution.Data centre are expected to serve uniinterruptedly round the year enabling them to perform their functions,it consumes enormous energy in the present scenario.Tremendous growth in the demand from IT Industry made it customary to develop newer technologies for the better operation of data centre.Energy conservation activities in data centre mainly concentrate on the air conditioning system since it is the major mechanical sub-system which consumes considerable share of the total power consumption of the data centre.The data centre energy matrix is best represented by power utilization efficiency(PUE),which is defined as the ratio of the total facility power to the IT equipment power.Its value will be greater than one and a large value of PUE indicates that the sub-systems draw more power from the facility and the performance of the data will be poor from the stand point of energy conservation. PUE values of 1.4 to 1.6 are acievable by proper design and management techniques.Optimizing the air conditioning systems brings enormous opportunity in bringing down the PUE value.The air conditioning system can be optimized by two approaches namely,thermal management and air flow management.thermal management systems are now introduced by some companies but they are highly sophisticated and costly and do not catch much attention in the thumb rules.

Finite-size scaling analysis of the avalanches in the three-dimensional Gaussian random-field Ising model with metastable dynamics

A numerical study is presented of the third-dimensional Gaussian random-field Ising model at T=0 driven by an external field. Standard synchronous relaxation dynamics is employed to obtain the magnetization versus field hysteresis loops. The focus is on the analysis of the number and size distribution of the magnetization avalanches. They are classified as being nonspanning, one-dimensional-spanning, two-dimensional-spanning, or three-dimensional-spanning depending on whether or not they span the whole lattice in different space directions. Moreover, finite-size scaling analysis enables identification of two different types of nonspanning avalanches (critical and noncritical) and two different types of three-dimensional-spanning avalanches (critical and subcritical), whose numbers increase with L as a power law with different exponents. We conclude by giving a scenario for avalanche behavior in the thermodynamic limit.

Implications of Hydrobiology and Nutrient dynamics on trophic structure and interactions in Cochin backwaters

In the present thesis entitled” Implications of Hydrobiology and Nutrient dynamics on Trophic structure and Interactions in Cochin backwaters”, an attempt has been made to assess the influence of general hydrography, nutrients and other environmental factors on the abundance, distribution and trophic interactions in Cochin backwater system. The study was based on five seasonal sampling campaigns carried out at 15 stations spread along the Cochin backwater system. The thesis is presented in the following 5 chapters. Salient features of each chapter are summarized below: Chapter 1- General Introduction: Provides information on the topic of study, environmental factors, back ground information, the significance, review of literature, aim and scope of the present study and its objectives.Chapter 2- Materials and Methods: This chapter deals with the description of the study area and the methodology adopted for sample collection and analysis. Chapter 3- General Hydrograhy and Sediment Characteristics: Describes the environmental setting of the study area explaining seasonal variation in physicochemical parameters of water column and sediment characteristics. Data on hydrographical parameters, nitrogen fractionation, phosphorus fractionation and biochemical composition of the sediment samples were assessed to evaluate the trophic status. Chapter 4- Nutrient Dynamics on Trophic Structure and Interactions: Describes primary, secondary and tertiary production in Cochin backwater system. Primary production related to cell abundance, diversity of phytoplankton that varies seasonally, concentration of various pigments and primary productivitySecondary production refers to the seasonal abundance of zooplankton especially copepod abundance and tertiary production deals with seasonal fish landings, gut content analysis and proximate composition of dominant fish species. The spatiotemporal variation, interrelationships and trophic interactions were evaluated by statistical methods. Chapter 5- Summary: The results and findings of the study are summarized in the fifth chapter of the thesis.

Numerical Simulation of Two-Part Underwater Towing System

The motion instability is an important issue that occurs during the operation of towed underwater vehicles (TUV), which considerably affects the accuracy of high precision acoustic instrumentations housed inside the same. Out of the various parameters responsible for this, the disturbances from the tow-ship are the most significant one. The present study focus on the motion dynamics of an underwater towing system with ship induced disturbances as the input. The study focus on an innovative system called two-part towing. The methodology involves numerical modeling of the tow system, which consists of modeling of the tow-cables and vehicles formulation. Previous study in this direction used a segmental approach for the modeling of the cable. Even though, the model was successful in predicting the heave response of the tow-body, instabilities were observed in the numerical solution. The present study devises a simple approach called lumped mass spring model (LMSM) for the cable formulation. In this work, the traditional LMSM has been modified in two ways. First, by implementing advanced time integration procedures and secondly, use of a modified beam model which uses only translational degrees of freedoms for solving beam equation. A number of time integration procedures, such as Euler, Houbolt, Newmark and HHT-α were implemented in the traditional LMSM and the strength and weakness of each scheme were numerically estimated. In most of the previous studies, hydrodynamic forces acting on the tow-system such as drag and lift etc. are approximated as analytical expression of velocities. This approach restricts these models to use simple cylindrical shaped towed bodies and may not be applicable modern tow systems which are diversed in shape and complexity. Hence, this particular study, hydrodynamic parameters such as drag and lift of the tow-system are estimated using CFD techniques. To achieve this, a RANS based CFD code has been developed. Further, a new convection interpolation scheme for CFD simulation, called BNCUS, which is blend of cell based and node based formulation, was proposed in the study and numerically tested. To account for the fact that simulation takes considerable time in solving fluid dynamic equations, a dedicated parallel computing setup has been developed. Two types of computational parallelisms are explored in the current study, viz; the model for shared memory processors and distributed memory processors. In the present study, shared memory model was used for structural dynamic analysis of towing system, distributed memory one was devised in solving fluid dynamic equations.

A Modeling Analysis of Changing Global Land Use as affected by Changing Demands for Wood Products

The 21st century has brought new challenges for forest management at a time when globalization in world trade is increasing and global climate change is becoming increasingly apparent. In addition to various goods and services like food, feed, timber or biofuels being provided to humans, forest ecosystems are a large store of terrestrial carbon and account for a major part of the carbon exchange between the atmosphere and the land surface. Depending on the stage of the ecosystems and/or management regimes, forests can be either sinks, or sources of carbon. At the global scale, rapid economic development and a growing world population have raised much concern over the use of natural resources, especially forest resources. The challenging question is how can the global demands for forest commodities be satisfied in an increasingly globalised economy, and where could they potentially be produced? For this purpose, wood demand estimates need to be integrated in a framework, which is able to adequately handle the competition for land between major land-use options such as residential land or agricultural land. This thesis is organised in accordance with the requirements to integrate the simulation of forest changes based on wood extraction in an existing framework for global land-use modelling called LandSHIFT. Accordingly, the following neuralgic points for research have been identified: (1) a review of existing global-scale economic forest sector models (2) simulation of global wood production under selected scenarios (3) simulation of global vegetation carbon yields and (4) the implementation of a land-use allocation procedure to simulate the impact of wood extraction on forest land-cover. Modelling the spatial dynamics of forests on the global scale requires two important inputs: (1) simulated long-term wood demand data to determine future roundwood harvests in each country and (2) the changes in the spatial distribution of woody biomass stocks to determine how much of the resource is available to satisfy the simulated wood demands. First, three global timber market models are reviewed and compared in order to select a suitable economic model to generate wood demand scenario data for the forest sector in LandSHIFT. The comparison indicates that the ‘Global Forest Products Model’ (GFPM) is most suitable for obtaining projections on future roundwood harvests for further study with the LandSHIFT forest sector. Accordingly, the GFPM is adapted and applied to simulate wood demands for the global forestry sector conditional on selected scenarios from the Millennium Ecosystem Assessment and the Global Environmental Outlook until 2050. Secondly, the Lund-Potsdam-Jena (LPJ) dynamic global vegetation model is utilized to simulate the change in potential vegetation carbon stocks for the forested locations in LandSHIFT. The LPJ data is used in collaboration with spatially explicit forest inventory data on aboveground biomass to allocate the demands for raw forest products and identify locations of deforestation. Using the previous results as an input, a methodology to simulate the spatial dynamics of forests based on wood extraction is developed within the LandSHIFT framework. The land-use allocation procedure specified in the module translates the country level demands for forest products into woody biomass requirements for forest areas, and allocates these on a five arc minute grid. In a first version, the model assumes only actual conditions through the entire study period and does not explicitly address forest age structure. Although the module is in a very preliminary stage of development, it already captures the effects of important drivers of land-use change like cropland and urban expansion. As a first plausibility test, the module performance is tested under three forest management scenarios. The module succeeds in responding to changing inputs in an expected and consistent manner. The entire methodology is applied in an exemplary scenario analysis for India. A couple of future research priorities need to be addressed, particularly the incorporation of plantation establishments; issue of age structure dynamics; as well as the implementation of a new technology change factor in the GFPM which can allow the specification of substituting raw wood products (especially fuelwood) by other non-wood products.

Analysis of the circadian system of the cockroach Rhyparobia (Leucophaea) maderae

Biologische Rhythmen bestimmen das gesamte Leben auf der Erde. Dabei scheint der circadiane Rhythmus der bekannteste zu sein, welcher durch eine Periodendauer von etwa (lat. circa) 24 Stunden gekennzeichnet ist. Dieser seit Jahrmillionen täglich stattfindende Wechsel von Hell- und Dunkelphasen führte zur Entwicklung von inneren Uhren in nahezu allen Organismen, welche die Physiologie und das Verhalten steuern. In der Schabe Rhyparobia (Leucophaea) maderae, einem etablierten Modellorganismus der circadianen Rhythmusforschung, konnte die innere Uhr auf die akzessorischen Medulla (AMe) eingegrenzt werden. Da neben klassischen Neurotransmittern auch Neuropeptide unablässig für die Aufrechterhaltung des endogenen Rhythmus oder aber für Synchronisationsprozesse sind, bestand der Hauptfokus der Arbeit in der Analyse einer möglichen Beteiligung des myoinhibitorischen Neuropeptids (MIP) am circadianen System von R. maderae. Mittels MALDI-TOF Massenspektrometrie konnten fünf Rhyparobia-MIPs in Präparationen der AMe identifiziert und zwei vollständig sequenziert werden. Immunzytochemische Analysen zeigten neben einer weiten MIP-Immunreaktivität im Gehirn eine dichte Innervierung der AMe und mit ihr assoziierten Neuronengruppen. Kolokalisation von MIP- und Pigment-dispersing Faktor-Immunreaktivitäten wurden in mindestens zwei circadianen Schrittmacherzellen beobachtet. Immunreaktivitäten in diversen Kommissuren lassen den Schluss zu, dass Rhyparobia-MIPs als Kopplungsfaktoren beider akzessorischen Medullae agieren. Immunzytochemische Kolokalisationsexperimente mit anderen neuroaktiven Kandidaten für den Lichteingangsweg zeigen, dass Rhyparobia-MIPs auch an der Übermittlung photischer Eingänge in die AMe vom ipsi- und kontralateralen Komplexauge beteiligt sein könnten. Darüber hinaus konnte durch Injektionsexperimente kombiniert mit Verhaltensassays gezeigt werden, dass mindestens Rhyparobia-MIP-1 und -2 Eingangssignale in die AMe sind. Des Weiteren konnte mittels enzyme-linked immunosorbent Assays gezeigt werden, dass MIP in der AMe und dem optischen Lobus mindestens über G-Protein gekoppelte Rezeptoren agiert. Diese Rezeptoren scheinen zudem tageszeitabhängig unterschiedlich exprimiert oder aber unterschiedlich sensitiv zu sein.

A molecular and cellular analysis of the circadian system of the cockroach Rhyparobia (Leucophaea) maderae

Circadiane Schrittmacher koordinieren die täglichen Rhythmen in Physiologie und Verhalten in lebenden Organismen. Die Madeira Schabe Rhyparobia maderae (Synonym: Leucophaea maderae) ist ein gut etabliertes Modell, um die neuronalen Mechanismen der circadianen Rhythmen bei Insekten zu studieren. Die akzessorische Medulla (AME) in den optischen Loben des Gehirns wurde als das circadiane Schrittmacherzentrum der Madeira Schabe identifiziert, das circadiane Rhythmen in der Laufaktivität steuert. Über die Neurotransmitter der Eingangswege in das circadiane System der Madeira Schabe ist noch nicht viel bekannt. Das Hauptziel dieser Arbeit war es, mögliche Eingangssignale in die innere Uhr der Madeira Schabe zu bestimmen. An primären Zellkulturen von AME-Neuronen wurden Calcium-Imaging Experimente durchgeführt, um die Neurotransmitter-abhängigen Veränderungen in der intrazellulären Calcium-Konzentration zu messen. Darüber hinaus wurde die Signalkaskade des Neuropeptids Pigment Dispersing Factor (PDF), dem wichtigsten Kopplungsfaktor in circadianen Schrittmachern von Insekten, in Calcium-Imaging und Förster-Resonanzenergietransfer (FRET) Experimenten untersucht. Acetylcholin (ACh) erhöht die intrazelluläre Calcium-Konzentration in der Mehrzahl der circadianen Schrittmacherneurone der Madeiraschabe. Applikation von GABA, Serotonin und Octopamin erhöhten oder reduzierten die intrazelluläre Calcium-Konzentration in den AME-Neuronen, während Histamin und Glutamat die intrazelluläre Calcium-Konzentration ausschließlich reduzierten. Pharmakologische Experimente zeigten, dass die AME-Neurone ACh über ionotrope nikotinische ACh-Rezeptoren detektierten, während GABA über ionotrope GABAA-Rezeptoren und metabotrope GABAB-Rezeptoren detektiert wurde. Diese Ergebnisse deuten darauf hin, dass die circadiane Aktivität der Schabe durch verschiedene Eingänge, einschließlich ACh, GABA, Glutamat, Histamin, Octopamin und Serotonin, moduliert wird. Bei den FRET Studien wurde ein Proteinkinase A (PKA)-basierter FRET Sensor zur Detektion von cyclischem AMP (cAMP) verwendet. Es wurde gezeigt, dass PDF über Adenylylcyclase-abhängige und -unabhängige Signalwege wirken kann. Zusätzlich wurden Laufrad-Assays durchgeführt, um Phasenverschiebungen im Rhythmus der circadianen Laufaktivität zu detektieren, nachdem der Neurotransmitter Histamin zu verschiedenen circadianen Zeiten injiziert wurde. Histamin-Injektionen durch die Komplexaugen der Schabe ergaben eine biphasische Phasenantwortkurve (phase response curve) mit Phasenverzögerungen in der Laufaktivität am späten subjektiven Tag und am Beginn der subjektiven Nacht und Phasenbeschleunigungen in der späten subjektiven Nacht. Schließlich wurde eine extrazelluläre Ableittechnik an lebenden Schaben etabliert, die gleichzeitige Langzeit-Ableitungen von der AME, des Komplexauges (Elektroretinogramm = ERG), und der Beinmuskulatur (Elektromyogramm = EMG) für mehrere Tage ermöglichte. Diese Methode bietet einen Ausgangspunkt für weitere elektrophysiologische Untersuchungen des circadianen Systems der Schabe, in denen Substanzen (z.B. Neurotransmitter und Neuropeptide) analysiert werden können, die einen Einfluss auf den circadianen Rhythmus in der Laufaktivität haben

Structural Dynamics Model of a Cartesian Robot

Methods are developed for predicting vibration response characteristics of systems which change configuration during operation. A cartesian robot, an example of such a position-dependent system, served as a test case for these methods and was studied in detail. The chosen system model was formulated using the technique of Component Mode Synthesis (CMS). The model assumes that he system is slowly varying, and connects the carriages to each other and to the robot structure at the slowly varying connection points. The modal data required for each component is obtained experimentally in order to get a realistic model. The analysis results in prediction of vibrations that are produced by the inertia forces as well as gravity and friction forces which arise when the robot carriages move with some prescribed motion. Computer simulations and experimental determinations are conducted in order to calculate the vibrations at the robot end-effector. Comparisons are shown to validate the model in two ways: for fixed configuration the mode shapes and natural frequencies are examined, and then for changing configuration the residual vibration at the end of the mode is evaluated. A preliminary study was done on a geometrically nonlinear system which also has position-dependency. The system consisted of a flexible four-bar linkage with elastic input and output shafts. The behavior of the rocker-beam is analyzed for different boundary conditions to show how some limiting cases are obtained. A dimensional analysis leads to an evaluation of the consequences of dynamic similarity on the resulting vibration.

Kinetics and dynamics measured using IntraCavity Laser Absorption Spectroscopy

IntraCavity Laser Absorption Spectroscopy (ICLAS) is a high-resolution, high sensitivity spectroscopic method capable of measuring line positions, linewidths, lineshapes, and absolute line intensities with a sensitivity that far exceeds that of a traditional multiple pass absorption cell or Fourier Transform spectrometer. From the fundamental knowledge obtained through these measurements, information about the underlying spectroscopy, dynamics, and kinetics of the species interrogated can be derived. The construction of an ICLA Spectrometer will be detailed, and the measurements utilizing ICLAS will be discussed, as well as the theory of operation and modifications of the experimental apparatus. Results include: i) Line intensities and collision-broadening coefficients of the A band of oxygen and previously unobserved, high J, rotational transitions of the A band, hot-band transitions, and transitions of isotopically substituted species. ii) High-resolution (0.013 cm-1) spectra of the second overtone of the OH stretch of trans-nitrous acid recorded between 10,230 and 10,350 cm-1. The spectra were analyzed to yield a complete set of rotational parameters and an absolute band intensity, and two groups of anharmonic perturbations were observed and analyzed. These findings are discussed in the context of the contribution of overtone-mediated processes to OH radical production in the lower atmosphere.

SAGA: System for Automated Geographical Analysis [abstract]

SAGA (System for Automated Geographic Analysis) es un SIG libre con capacidades para el manejo y análisis de información tanto vectorial como ráster, con un especial enfoque en esta última. Asimismo, es su enfoque analítico el que constituye su característica más destacable, siendo una herramienta de primer orden para la extracción de información a partir de todo tipo de capas de datos georeferenciados. (...)

The dynamics of local hiv-1 epidemics: the colombian and belgian cohorts

We aimed to characterize the HIV-1 epidemic of the Belgian and Colombian cohorts using an integrated approach that includes socio-demographic information, clinical data, and viral sequences, analyzed with statistical and phylogenetic approaches.

Informality in the City: a Theoretical Analysis

This thesis theoretically studies the relationship between the informal sector (both in the labor and the housing market) and the city structure.

Configuración de la interfaz discurso-gramática en el lenguaje del profesor de preescolar en el aula ILE : presentación de una red sistémica como herramienta para un análisis sistemático de las funciones reguladoras. Modelling the discourse-grammar interface of ELF pre-school teacher talk (native and non-native) : proposal of a system network enabling the systematic analysis of regulatory functions.

Esta investigación pretende alcanzar dos objetivos. Cubrir el vacío existente en los estudios de las funciones comunicativas del habla de profesores, en este caso de inglés como Lengua Extranjera (ILE) destinado a nivel preescolar, y configurar una interfaz discurso-gramática de las funciones reguladoras del lenguaje.. En primer lugar, para lograr un análisis discursivo-semántico, en este trabajo se diseña la Red Sistémica de Funciones Reguladoras, RSFR, una herramienta que resume las diferentes opciones discursivo-semánticas de los contextos de las funciones reguladoras. A continuación, se analizan los datos en el estrato léxico-gramatical para facilitar conclusiones sobre la relación función-realización formal. Por último se exponen las similitudes y diferencias en la producción lingüística de las funciones reguladoras entre profesores nativos y no nativos.. Las aportaciones más destacadas de esta investigación son cuatro: hacer posible un estudio sistemático del significado mediante el diseño de una herramienta; la propuesta de una taxonomía de funciones reguladoras; el análisis de la dependencia entre las funciones reguladoras, y sus realizaciones lingüísticas; y las diferencias encontradas en la comparación del discurso del profesor nativo y no-nativo..

Studies of dynamics of physical agent ecosystems

This thesis addresses the problem of learning in physical heterogeneous multi-agent systems (MAS) and the analysis of the benefits of using heterogeneous MAS with respect to homogeneous ones. An algorithm is developed for this task; building on a previous work on stability in distributed systems by Tad Hogg and Bernardo Huberman, and combining two phenomena observed in natural systems, task partition and hierarchical dominance. This algorithm is devised for allowing agents to learn which are the best tasks to perform on the basis of each agent's skills and the contribution to the team global performance. Agents learn by interacting with the environment and other teammates, and get rewards from the result of the actions they perform. This algorithm is specially designed for problems where all robots have to co-operate and work simultaneously towards the same goal. One example of such a problem is role distribution in a team of heterogeneous robots that form a soccer team, where all members take decisions and co-operate simultaneously. Soccer offers the possibility of conducting research in MAS, where co-operation plays a very important role in a dynamical and changing environment. For these reasons and the experience of the University of Girona in this domain, soccer has been selected as the test-bed for this research. In the case of soccer, tasks are grouped by means of roles. One of the most interesting features of this algorithm is that it endows MAS with a high adaptability to changes in the environment. It allows the team to perform their tasks, while adapting to the environment. This is studied in several cases, for changes in the environment and in the robot's body. Other features are also analysed, especially a parameter that defines the fitness (biological concept) of each agent in the system, which contributes to performance and team adaptability. The algorithm is applied later to allow agents to learn in teams of homogeneous and heterogeneous robots which roles they have to select, in order to maximise team performance. The teams are compared and the performance is evaluated in the games against three hand-coded teams and against the different homogeneous and heterogeneous teams built in this thesis. This section focuses on the analysis of performance and task partition, in order to study the benefits of heterogeneity in physical MAS. In order to study heterogeneity from a rigorous point of view, a diversity measure is developed building on the hierarchic social entropy defined by Tucker Balch. This is adapted to quantify physical diversity in robot teams. This tool presents very interesting features, as it can be used in the future to design heterogeneous teams on the basis of the knowledge on other teams.