Inherited structural controls on fault geometry, architecture and hydrothermal activity: an example from Grimsel Pass, Switzerland

Exhumed faults hosting hydrothermal systems provide direct insight into relationships between faulting and fluid flow, which in turn are valuable for making hydrogeological predictions in blind settings. The Grimsel Breccia Fault (Aar massif, Central Swiss Alps) is a late Neogene, exhumed dextral strike-slip fault with a maximum displacement of 25–45 m, and is associated with both fossil and active hydrothermal circulation. We mapped the fault system and modelled it in three dimensions, using the distinctive hydrothermal mineralisation as well as active thermal fluid discharge (the highest elevation documented in the Alps) to reveal the structural controls on fluid pathway extent and morphology. With progressive uplift and cooling, brittle deformation inherited the mylonitic shear zone network at Grimsel Pass; preconditioning fault geometry into segmented brittle reactivations of ductile shear zones and brittle inter-shear zone linkages. We describe ‘pipe’-like, vertically oriented fluid pathways: (1) within brittle fault linkage zones and (2) through alongstrike- restricted segments of formerly ductile shear zones reactivated by brittle deformation. In both cases, low-permeability mylonitic shear zones that escaped brittle reactivation provide important hydraulic seals. These observations show that fluid flow along brittle fault planes is not planar, but rather highly channelised into sub-vertical flow domains, with important implications for the exploration and exploitation of geothermal energy.

Self-learning of fault diagnosis identification

A good and early fault detection and isolation system along with efficient alarm management and fine sensor validation systems are very important in today¿s complex process plants, specially in terms of safety enhancement and costs reduction. This paper presents a methodology for fault characterization. This is a self-learning approach developed in two phases. An initial, learning phase, where the simulation of process units, without and with different faults, will let the system (in an automated way) to detect the key variables that characterize the faults. This will be used in a second (on line) phase, where these key variables will be monitored in order to diagnose possible faults. Using this scheme the faults will be diagnosed and isolated in an early stage where the fault still has not turned into a failure.

One dimensional exciton luminescence induced by extended defects in nonpolar (Al,Ga)N/GaN quantum wells

In this study, we present the optical properties of nonpolar GaN/(Al,Ga)N single quantum wells (QWs) grown on either a- or m-plane GaN templates for Al contents set below 15%. In order to reduce the density of extended defects, the templates have been processed using the epitaxial lateral overgrowth technique. As expected for polarization-free heterostructures, the larger the QW width for a given Al content, the narrower the QW emission line. In structures with an Al content set to 5 or 10%, we also observe emission from excitons bound to the intersection of I1-type basal plane stacking faults (BSFs) with the QW. Similarly to what is seen in bulk material, the temperature dependence of BSF-bound QW exciton luminescence reveals intra-BSF localization. A qualitative model evidences the large spatial extension of the wavefunction of these BSF-bound QW excitons, making them extremely sensitive to potential fluctuations located in and away from BSF. Finally, polarization-dependent measurements show a strong emission anisotropy for BSF-bound QW excitons, which is related to their one-dimensional character and that confirms that the intersection between a BSF and a GaN/(Al,Ga)N QW can be described as a quantum wire.

Distributed Fault Diagnosis Using Bayesian Reasoning in MAGNETO

Many of the emerging telecom services make use of Outer Edge Networks, in particular Home Area Networks. The configuration and maintenance of such services may not be under full control of the telecom operator which still needs to guarantee the service quality experienced by the consumer. Diagnosing service faults in these scenarios becomes especially difficult since there may be not full visibility between different domains. This paper describes the fault diagnosis solution developed in the MAGNETO project, based on the application of Bayesian Inference to deal with the uncertainty. It also takes advantage of a distributed framework to deploy diagnosis components in the different domains and network elements involved, spanning both the telecom operator and the Outer Edge networks. In addition, MAGNETO features self-learning capabilities to automatically improve diagnosis knowledge over time and a partition mechanism that allows breaking down the overall diagnosis knowledge into smaller subsets. The MAGNETO solution has been prototyped and adapted to a particular outer edge scenario, and has been further validated on a real testbed. Evaluation of the results shows the potential of our approach to deal with fault management of outer edge networks.

Fault Tolerance Analysis and Self-Healing Strategy of Autonomous, Evolvable Hardware Systems

This paper presents an analysis of the fault tolerance achieved by an autonomous, fully embedded evolvable hardware system, which uses a combination of partial dynamic reconfiguration and an evolutionary algorithm (EA). It demonstrates that the system may self-recover from both transient and cumulative permanent faults. This self-adaptive system, based on a 2D array of 16 (4×4) Processing Elements (PEs), is tested with an image filtering application. Results show that it may properly recover from faults in up to 3 PEs, that is, more than 18% cumulative permanent faults. Two fault models are used for testing purposes, at PE and CLB levels. Two self-healing strategies are also introduced, depending on whether fault diagnosis is available or not. They are based on scrubbing, fitness evaluation, dynamic partial reconfiguration and in-system evolutionary adaptation. Since most of these adaptability features are already available on the system for its normal operation, resource cost for self-healing is very low (only some code additions in the internal microprocessor core)

Metodología de evaluación de la seguridad vial en intersecciones basada en el análisis cuantitativo de conflictos entre vehículos

El modo tradicional de estimar el nivel de seguridad vial es el registro de accidentes de tráfico, sin embargo son altamente variables, aleatorios y necesitan un periodo de registro de al menos 3 años. Existen metodologías preventivas en las cuales no es necesario que ocurra un accidente para determinar el nivel de seguridad de una intersección, como lo es la técnica de los conflictos de tráfico, que introduce las mediciones alternativas de seguridad como cuantificadoras del riesgo de accidente. El objetivo general de la tesis es establecer una metodología que permita clasificar el riesgo en intersecciones interurbanas, en función del análisis de conflictos entre vehículos, realizado mediante las variables alternativas o indirectas de seguridad vial. La metodología para el análisis y evaluación temprana de la seguridad en una intersección, estará basada en dos medidas alternativas de seguridad: el tiempo hasta la colisión y el tiempo posterior a la invasión de la trayectoria. El desarrollo experimental se realizó mediante estudios de campo, para la parte exploratoria de la investigación, se seleccionaron 3 intersecciones interurbanas en forma de T donde se obtuvieron las variables que caracterizan los conflictos entre vehículos; luego mediante técnicas de análisis multivariante, se obtuvo los modelos de clasificación del riesgo cualitativo y cuantitativo. Para la homologación y el estudio final de concordancia entre el índice propuesto y el modelo de clasificación, se desarrollaron nuevos estudios de campo en 6 intersecciones interurbanas en forma de T. El índice de riesgo obtenido resulta una herramienta muy útil para realizar evaluaciones rápidas conducentes a estimar la peligrosidad de una intersección en T, debido a lo simple y económico que resulta obtener los registros de datos en campo, por medio de una rápida capacitación a operarios; la elaboración del informe de resultados debe ser por un especialista. Los índices de riesgo obtenidos muestran que las variables originales más influyentes son las mediciones de tiempo. Se pudo determinar que los valores más altos del índice de riesgo están relacionados a un mayor riesgo de que un conflicto termine en accidente. Dentro de este índice, la única variable cuyo aporte es proporcionalmente directo es la velocidad de aproximación, lo que concuerda con lo que sucede en un conflicto, pues una velocidad excesiva se manifiesta como un claro factor de riesgo ya que potencia todos los fallos humanos en la conducción. Una de las principales aportaciones de esta tesis doctoral a la ingeniería de carreteras, es la posibilidad de aplicación de la metodología por parte de administraciones de carreteras locales, las cuales muchas veces cuentan con recursos de inversión limitados para efectuar estudios preventivos, sobretodo en países en vías de desarrollo. La evaluación del riesgo de una intersección luego de una mejora en cuanto a infraestructura y/o dispositivos de control de tráfico, al igual que un análisis antes – después, pero sin realizar una comparación mediante la ocurrencia de accidentes, sino que por medio de la técnica de conflictos de tráfico, se puede convertir en una aplicación directa y económica. Además, se pudo comprobar que el análisis de componentes principales utilizado en la creación del índice de riesgo de la intersección, es una herramienta útil para resumir todo el conjunto de mediciones que son posibles de obtener con la técnica de conflictos de tráfico y que permiten el diagnóstico del riesgo de accidentalidad en una intersección. En cuanto a la metodología para la homologación de los modelos, se pudo establecer la validez y confiabilidad al conjunto de respuestas entregadas por los observadores en el registro de datos en campo, ya que los resultados de la validación establecen que la medición de concordancia de las respuestas entregadas por los modelos y lo observado, son significativas y sugieren una alta coincidencia entre ellos. ABSTRACT The traditional way of estimating road safety level is the record of occurrence of traffic accidents; however, they are highly variable, random, and require a recording period of at least three years. There are preventive methods which do not need an accident to determine the road safety level of an intersection, such as traffic conflict technique, which introduces surrogate safety measures as parameters for the evaluation of accident risks. The general objective of the thesis is to establish a methodology that will allow the classification of risk at interurban intersections as a function of the analysis of conflicts between vehicles performed by means of surrogate road safety variables. The proposal of a methodology for the analysis and early evaluation of safety at an intersection will be based on two surrogate safety measures: the time to collision and the post encroachment time. On the other hand, the experimental development has taken place by means of field studies in which the exploratory part of the investigation selected three interurban T-intersections where the application of the traffic conflict technique gave variables that characterize the conflicts between vehicles; then, using multivariate analysis techniques, the models for the classification of qualitative and quantitative risk were obtained. With the models new field studies were carried out at six interurban Tintersections with the purpose of developing the homologation and the final study of the agreement between the proposed index and the classification model. The risk index obtained is a very useful tool for making rapid evaluations to estimate the hazard of a T-intersection, as well as for getting simply and economically the field data records after a fast training of the workers and then preparing the report of results by a specialist. The risk indices obtained show that the most influential original variables are the measurements of time. It was determined that the highest risk index values are related with greater risk of a conflict resulting in an accident. Within this index, the only variable whose contribution is proportionally direct is the approach speed, in agreement with what happens in a conflict, because excessive speed appears as a clear risk factor at an intersection because it intensifies all the human driving faults. One of the main contributions of this doctoral thesis to road engineering is the possibility of applying the methodology by local road administrations, which very often have limited investment resources to carry out these kinds of preventive studies, particularly in developing countries. The evaluation of the risk at an intersection after an improvement in terms of infrastructure and/or traffic control devices, the same as a before/after analysis, without comparison of accident occurrence but by means of the traffic conflict technique, can become a direct and economical application. It is also shown that main components analysis used for producing the risk index of the intersection is a useful tool for summarizing the whole set of measurements that can be obtained with the traffic conflict technique and allow diagnosing accident risk at an intersection. As to the methodology for the homologation of the models, the validity and reliability of the set of responses delivered by the observers recording the field data could be established, because the results of the validation show that agreement between the observations and the responses delivered by the models is significant and highly coincident.