Evaluation of extracts from Coccoloba mollis using the Salmonella/microsome system and in vivo tests

The common everyday use of medicinal plants is an ancient, and still very widespread practice, whereby the need for studies on their possible toxicity and mutagenic properties. The species Coccoloba mollis has been much used in phytotherapy, mainly in cases involving loss of memory and stress. In order to investigate its genotoxic and mutagenic potential, ethanolic extracts from the leaves and roots underwent Salmonella/microsome assaying (TA98 and TA100 strains, with and without exogenous metabolism - S9), besides comet and micronucleus tests in vivo.There was no significant increase in the number of revertants/plate of Salmonella strains in any of the analyzed root-extract concentrations, although the extract itself was extremely toxic to the Salmonella TA98 strain in the tests carried out with S9 (doses varying from 0.005 to 0.5 µg/plate). on the other hand, the leaf-extract induced mutations in the TA98 strain in the absence of S9 in the highest concentration evaluated, although at very low mutagenic potency (0.004 rev/µg). Furthermore, there was no statistically significant increase in the number of comets and micronuclei, in treatments involving Swiss mice. It was obvious that extracts of Coccoloba mollis, under the described experimental conditions, are not mutagenic.

Study of the thermomechanical and electrical properties of conducting composites containing natural rubber and carbon black

This work describes the preparation and characterization of composite materials obtained by the combination of natural rubber (NR) and carbon black (CB) in different percentages, aiming to improve their mechanical properties, processability, and electrical conductivity, aiming future applications as transducer in pressure sensors. The composites NR/CB were characterized through optical microscopy (OM), DC conductivity, thermal analysis using differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMA), thermogravimetry (TGA), and stress-strain test. The electrical conductivity varied between 10(-9) and 10 S m(-1), depending on the percentage of CB in the composite. Furthermore, a linear (and reversible) dependence of the conductivity on the applied pressure between 0 and 1.6 MPa was observed for the sample with containing 80 wt % of NR and 20% of CB. (C) 2007 Wiley Periodicals, Inc.

Stress analysis of an upper central incisor restored with different posts

The effect of different anatomic shapes and materials of posts in the stress distribution on an endodontically treated incisor was evaluated in this work. This study compared three post shapes (tapered, cylindrical and two-stage cylindrical) made of three different materials (stainless steel, titanium and carbon fibre on Bisphenol A-Glycidyl Methacrylate (Bis-GMA) matrix). Two-dimensional stress analysis was performed using the Finite Element Method. A static load of 100N was applied at 45degrees inclination with respect to the incisor's edge. The stress concentrations did not significantly affect the region adjacent to the alveolar bone crest at the palatine portion of the tooth, regardless of the post shape or material. However, stress concentrations on the post/dentin interface on the palatine side of the tooth root presented significant variations for different post shapes and materials. Post shapes had relatively small impact on the stress concentrations while post materials introduced higher variations on them. Stainless steel posts presented the highest level of stress concentration, followed by titanium and carbon/Bis-GMA posts.

Charge distribution and calcium affinity of sulfated alpha-L-galactans from ascidians. Comparison between linear and highly branched polymers

Calcium binding and charge distribution on highly branched and linear sulfated L-galactans from ascidians have been studied using a metallochromic indicator and conductimetric titrations. The distance between charged groups of the linear and highly branched galactans does not vary despite their marked differences in sulfate/total sugar molar ratios. These results indicate that the sulfated L-galactose units are concentrated in the central polysaccharide core and not intercalated among non-sulfated units. This inference is consistent with the chemical studies of these galactans. Surprisingly, calcium affinity increases with increasing amounts of non-sulfated sugar branches in the molecule. Thus, calcium binding in these polymers is not a simple function of availability of anion binding sites but a more complex calcium-polysaccharide interaction. (C) 1998 Elsevier B.V. Ltd. All rights reserved.

Isolation and characterisation of cycloheximide sensitive mutants of Aspergillus nidulans

Aspergillus nidulans is a non-pathogenic fungus with well-developed genetics which provides an excellent model system for studying different aspects of drug resistance in filamentous fungi. As a preliminary step to characterizing genes that confer pleiotropic drug resistance in Aspergillus, we isolated cycloheximide-sensitive mutants of A. nidulans, which is normally resistant to this: drug. The rationale for this approach is to identify gents whose products are important for drug resistance by analysing mutations that alter the resistance/sensitivity status of the cell. Fifteen cycloheximide-sensitive (named scy for sensitive to cycloheximide) mutants of A, nidulans were isolated and genetically characterised. Each scy mutant was crossed with the wild-type strain and five of the crosses gave 50% cycloheximide-sensitive progeny suggesting that they carry a single mutation required for cycloheximide sensitivity. We examined ten sep mutants for resistance/sensitivity to other drugs or stress agents with different and/or the same mechanism of action, Sis of these mutants exhibited other altered resistance/sensitivity phenotypes which were linked to the cycloheximide sensitivity, These six mutants were analyzed by pairwise crosses and found to represent six linkage groups, named scyA-F. One of the mutants showed fragmentation of its vacuolar system and, in addition, its growth was osmotic, low-pi-II and oxidative-stress sensitive.

Maternal antibody transfer to broiler progeny varies among strains and is affected by grain source and cage density

Two experiments were conducted to examine the effects of broiler breeder dietary grain source and cage density on maternal antibody (MatAb) transfer to progeny in 2 genetic strains (A and B). Broiler breeders were assigned to 16 litter floor pens and fed either corn- or wheat-based diets. Breeders were administered 4 live vaccines against Newcastle disease virus (NDV). At 23 wk of age, pullets and cocks, which reflected the full BW distribution from each treatment, were moved to a cage breeder house and placed at 1 or 2 hens/cage. Breeders were artificially inseminated at 44 wk (experiment 1) and 52 wk of age (experiment 2). Eggs were collected for 8 d, incubated, and placed in individual pedigree bags at d 19 of incubation. Blood samples from 5 chicks per treatment combination were collected at hatch in both experiments. Spleen and bursa were collected from the same chicks for histomorphometry analyses in experiment 2. In the second experiment, 12 chicks per treatment were placed in cages. Progeny were provided diets based on the same grain (corn or wheat) as their parents. Serum samples were collected at 5, 9, and 13 d of age and analyzed for anti-NDV MatAb. Data were analyzed as a 2 x 2 x 2 factorial design considering strain, dietary grain source, and cage density as main factors. Interaction effects were observed in breeders and progeny. Experiment 1 showed that strain A chicks had lower levels of MatAb when hens were housed at 2 hens/cage rather than 1 hen/cage. The MatAb levels of strain B chickens were not affected by cage density in either experiment. Experiment 2 demonstrated similar effects of cage density on MatAb levels and the area of bursa follicles for both strains. Progeny of breeders fed corn-based diets had smaller spleen white pulp only when hens were housed at 2 hens/cage compared with 1 hen/cage. The results of these experiments suggest that breeder strain and cage-density conditions affected MatAb transfer to progeny and embryo development of spleen and bursa.

Oxidative Stress Impairs Vasorelaxation Induced by the Soluble Guanylyl Cyclase Activator BAY 41-2272 in Spontaneously Hypertensive Rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Abundance and temporal-spatial distribution of the rock shrimp Sicyonia dorsalis Kingsley, 1878 (Decapoda, Penaeoidea) from the northern coast of São Paulo state, Brazil.

Abundance and ecological distribution of the rock shrimp Sicyonia dorsalis from the northern coast of São Paulo State (Brazil) was investigated during a two-year period (July 2001 to June 2003). Monthly collections were conducted in the Ubatuba (UBA) and Caraguatatuba (CA) regions, using a commercial shrimp boat equipped with double-rig nets. In each region, seven depths were delimited (5 m to 35 m). A total of 1,752 and 1,894 shrimp were obtained at UBA and CA, respectively. The distribution of S. dorsalis differed among depths, years, and seasons. Highest abundance values were recorded in depths where silt and clay comprised more than 70% of the sediment. The majority (89%) of captured specimens were caught in the first year, in periods of lower mean temperature, mainly in the spring of 2001, when the intrusion of cold South Atlantic Central Waters (SACW) was more intense. In such period, the differences in the abundance of shrimps in each region (UBA = 1,118 and CA = 493) suggested that S. dorsalis migrated to the north (UBA), during the SACW intrusion. Thus, sediment type and water temperature are among the most important variables affecting the bathymetric distribution of S. dorsalis in these regions.

Non-linear analysis of reinforced concrete plates by the boundary element method and continuum damage mechanics

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Tissue distribution of lycopene in ferrets and rats after lycopene supplementation

To determine lycopene uptake and tissue distribution in ferrets (Mustela putorius furo) and F344 rats, we supplemented orally 4.6 mg/(kg body wt-d) lycopene in a tomato oleoresin-com oil mixture (experimental groups). After 9 wk of supplementation, the animals were killed and blood and organs were collected. Plasma and tissue carotenoids were extracted and measured using HPLC. Mean concentrations of lycopene (nmol/kg wet tissue) in saponified tissues of ferrets were as follows: liver 933, intestine 73, prostate 12.7 and stomach 9.3. Levels of lycopene (nmol/kg wet tissue) in saponified tissue of rats were as follows: liver 14213, intestine 3125, stomach 78.6, prostate 24 and testis 3.9. When these organs were extracted without saponification, the lycopene levels were lower, except for rat testis. All-translycopene was the predominant isomer found in tomato oleoresin and in the majority of rat tissues, whereas cislycopenes were predominant in rat prostate and plasma. This pattern was reversed in ferrets. The results show the following: 1) lycopene from tomato oleoresin is absorbed and stored primarily in the liver of both animals; 2) saponification generally improves the extraction of lycopene from most tissues of both animals; 3) cis-lycopene and all- translycopene are the predominant isomers in ferret and rat tissues, respectively; and 4) rats absorb lycopene more effectively than ferrets.

Analysis of chromatin and nuclear area alterations in triatomines during starvation

In the present study changes in nuclear area and chromatin distribution in the Malpighian tubules of a blood-feeding insect, the vector of Chagas' disease were analysed. Male and female adult insects were dissected, after a starving period of up to 28 days. The Malpighian tubules were fixed and stained by orcein lacto-acetic. The nuclei were analyzed by photomicrography, karyometry and a statistical analysis was performed. It was observed that with the increase of the starvation period there were alterations in the nuclear phenotype, that is, changes in the nuclear area and chromatin extenuation. In males, starting from the second week of starvation, chromatin extenuation was accentuated, and the beginning of nuclear coalition occurred more frequently in the third and fourth starvation weeks. In females, the accentuated chromatin extenuation was observed after the third starvation week, and irregularities in nuclear borders were more frequent. The descriptive statistical analysis of the male and temale nuclear areas revealed that the nuclear areas continued to increase during starvation reaching highest values in the third week. Another outstanding aspect is that in the third starvation week karyometry presented larger heterogeneity with higher standard deviation values for both genders. Therefore, nuclear alterations related to the distribution and extenuation chromatin and increase in nuclear area were observed. These aspects suggest the presence of nuclear metabolic mechanisms that lead to synthesis of specific proteins necessary for the protection and maintenance of the cell during physiologic stress.

Study of the thermo-mechanical and electrical properties of conducting composites containing natural rubber and carbon black

This work shows the preparation and characterization of composites obtained by mixing natural rubber (NR) and carbon black (CB) in different percentages aiming suitable mechanical properties, processability and electrical conductivity for future applications as transducers in pressure sensors. The composites NR/CB are characterized through dc conductivity, thermal analysis using differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMA), thermogravimetry (TGA) and stress-strain test. The electrical conductivity changed from 10-9 to 10 Sm-1 depending on the percentage of CB in the composite. Besides, it was found a linear (and reversible) dependence of the conductivity on the applied pressure in the range from 0 to 1.6 MPa for the sample 80/20 (NR/CB wt%).

Bathymetric distribution and recruitment of the spider crab Libinia spinosa H. Milne Edwards 1834 in the Ubatuba and Caraguatatuba regions, northern coast of São Paulo, Brazil (Crustacea, Brachyura, Majoidea, Pisidae)

The objective of this study was to investigate the spatial and temporal distribution of Libinia spinosa H. MILNE EDWARDS 1834 on unconsolidated sublittoral bottoms in two regions off the northern coast of the state of São Paulo, and to analyze the influence of environmental factors on the occurrence of this species and observe the recruitment pattern of its young. Crabs were collected monthly (July 2001 through June 2003) at depths of 5, 10, 15, 20, 25, 30 and 35 In, from a fishing boat equipped with two double-rig nets. Samples of water and sediment were collected for analysis of environmental factors. A total of 2112 spider crabs was obtained (701 juveniles and 1411 adults). The highest abundance was observed at depths of 20 and 25 m, in both regions. These localities were characterized by substrate composed of very fine sand and silt-clay. In regard to the temporal distribution, juveniles and adults predominated in the summer and winter months respectively. From these results, one can infer that the distribution of L. spinosa is related to environmental factors favorable for its life cycle; sediment type is the factor which most strongly determines its presence. © E. Schweizerbart'sche Verlagsbuchhandlung (Nägele u. Obermiller), 2007.

The income distribution problem in Latin America and the Caribbean

Includes bibliography

Photoelastic comparison of single tooth implant-abutment-bone of platform switching vs conventional implant designs

Objectives: The maintenance and stability of peri-implantar soft tissue seem to be related to the crestal bone around the implant platform and different implant designs connections might affect this phenomenon. The aim of this study was to evaluate by photoelastic analysis the stress distribution in the cervical and apical site of implant-abutment interface of conventional implant joints (external hex, internal hex and cone morse) and compare to the novel platform switching design. Materials and methods: It was fabricated photoelastic models using five different implant-abutment connection, one set of external hex (Alvim Ti, Neodent, Curitiba, Brazil), one set of internal hex (Full Osseotite, Biomet 3i, Florida, USA), one cone morse set (Alvim CM, Neodent, Curitiba, Brazil), and two sets of internal hex plus platform switching concept (Alvim II Plus, Neodent, Curitiba, Brazil) (Certain Prevail, Biomet 3i, Florida, USA). These models were submitted to two compressive loads, axial from 20 kgf (load I) and another (load II), inclined 45° from 10 kgf. During the qualitative analysis, digital pictures were taken from a polariscope, for each load situation. For the quantitative analyses in both situations of load, the medium, minimum and maximum in MPa values of shear strain were determined in the cervical and apical site. The Kruskal-Wallis test was used to compare the results between the different systems and between cervical and apical site were compared using Mann-Whitney U test. Results: The results from qualitative analysis showed less concentration of strain in the cervical area to the internal hex plus platform switching (Certain Prevail), in both situation of load. The same results were get in the quantitative analysis, showing less stress concentrations around the implant Certain Prevail with internal hex plus the novel design (17.9 MPa to load I and 29.5 MPa to load II), however, without statistical significant difference between the systems. Conclusion: The minor stress concentration strongly suggest the use of platform switching design as a manner to prevent bone loss around the implant-abutment platform. Clinical Significance: From the result of this study its possible to make clinical decision for implant system which provides implant components with platform switching characteristics.