Extraction of cellulose whiskers from cassava bagasse and their applications as reinforcing agent in natural rubber

In this work cassava bagasse, a by-product of cassava starch industrialization was investigated as a new raw material to extract cellulose whiskers. This by-product is basically constituted of cellulose fibers (17.5 wt%) and residual starch (82 wt%). Therefore, this residue contains both natural fibers and a considerable quantity of starch and this composition suggests the possibility of using cassava bagasse to prepare both starch nanocrystals and cellulose whiskers. In this way, the preparation of cellulose whiskers was investigated employing conditions of sulfuric acid hydrolysis treatment found in the literature. The ensuing materials were characterized by transmission electron microscopy (TEM) and X-ray diffraction experiments. The results showed that high aspect ratio cellulose whiskers were successfully obtained. The reinforcing capability of cellulose whiskers extracted from cassava bagasse was investigated using natural rubber as matrix. High mechanical properties were observed from dynamic mechanical analysis. (C) 2010 Elsevier B.V. All rights reserved.

Mechanical, thermal and morphological characterization of polypropylene/biodegradable polyester blends with additives

The (bio)degradation of polyolefins can be accelerated by modifying the level of crystallinity or by incorporation of carbonyl groups by adding pro-oxidants to masterbatches or through exposure to ultraviolet irradiation. In this work we sought to improve the degradation of PP by adding cobalt, calcium or magnesium stearate to Ecoflex(R), PP or Ecoflex(R)/PP blends. The effect of the pro-oxidants on biodegradability was assessed by examining the mechanical properties and fluidity of the polymers. PP had higher values for tensile strength at break and Young`s modulus than Ecoflex(R), and the latter had little influence on the properties of PP in Ecoflex(R)/PP blends. However, the presence of pro-oxidants (except for calcium) reduced these properties. All of the pro-oxidants enhanced the fluidity of PP, a phenomenon that facilitated polymer degradation at high temperatures. (C) 2009 Elsevier Ltd. All rights reserved.

Extrusion and characterization of functionalized cellulose whiskers reinforced polyethylene nanocomposites

The surface of ramie cellulose whiskers has been chemically modified by grafting organic acid chlorides presenting different lengths of the aliphatic chain by an esterification reaction. The occurrence of the chemical modification was evaluated by FTIR and X-ray photoelectron spectroscopies, elemental analysis and contact angle measurements. The crystallinity of the particles was not altered by the chain grafting, but it was shown that covalently grafted chains were able to crystallize at the cellulose surface when using C18. Both unmodified and functionalized nanoparticles were extruded with low density polyethylene to prepare nanocomposite materials. The homogeneity of the ensuing nanocomposites was found to increase with the length of the grafted chains. The thermomechanical properties of processed nanocomposites were studied by differential scanning calorimetry (DSC), dynamical mechanical analysis (DMA) and tensile tests. A significant improvement in terms of elongation at break was observed when sufficiently long chains were grafted on the surface of the nanoparticles. It was ascribed to improved dispersion of the nanoparticles within the LDPE matrix. (C) 2009 Elsevier Ltd. All rights reserved.

Nuclear magnetic resonance water relaxation time changes in bananas during ripening: a new mechanism

BACKGROUND: Nuclear magnetic resonance studies of banana fragments during ripening show an increase on the water transverse relaxation time (T(2)) and a decrease in water self-diffusion coefficient (D). As T(2) and D are normally directly correlated, we studied these two properties in intact bananas during ripening, in an attempt to rule out the effect of injury on the apparent discrepancies in the behavior of T(2) and D. RESULTS: The results show that injury in bananas causes a decrease in T(2) of the water in vacuoles (T(2vac)). They also show that T(2vac) increased and D decreased during ripening, ruling out the injury effect. To explain the apparent discrepancies, we propose a new hypothesis for the increase in T(2) values, based on the reduction of Fe(3+) ions to Fe(2+) by galacturonic acid, produced by the hydrolysis of pectin and a decrease in internal oxygen concentration during ripening. CONCLUSION: As injury alters T(2) values it is necessary to use intact bananas to study relaxation times during ripening. The novel interpretation for the increase in T(2vac) based on reduction of Fe(+3) and O(2) concentration is an alternative mechanism to that based on the hydrolysis of starch in amyloplasts. (C) 2010 Society of Chemical Industry

The role of TaABF1 in abscisic acid-mediated suppression of -amylase gene expression in cereal grains

The phytohormones gibberellin (GA) and abscisic acid (ABA) regulate important developments events in germinating seeds. Specifically, GA induces the expression of hyrolase genes, like the α-amylase gene Amy32b, which mobilizes starch reserves to be used by the embryo, and ABA suppresses this induction. Recent advancements identified ABA and GA receptors and key components in the signaling pathways, however, the mechanism of crosstalk between the hormones remains largely unknown. To further elucidate the mechanism of ABA suppression of GA-induced genes, we focused on the transcription factor TaABF1, a member of the ABA response element binding factor family. TaABF1 has been shown to physically interact with the SnRK2 kinase PKABA1 and overexpression of TaABF1 or PKABA1 can suppress Amy32b. We carried out particle bombardment experiments to investigate how TaABF1 suppresses Amy32b and how TaABF1 is activated by ABA. The role of TaABF1 in ABA-mediated suppression of Amy32b is more complicated than hypothesized. Unlike PKABA1, overexpression of TaABF1 did not cause a decrease of GAMyb expression and in fact resulted in an increase of GAMyb expression. When TaABF1 and GAMyb were simultaneously overexpressed in aleurone, the GAMyb induction of Amy32b was unaffected, indicating that the target of TaABF1 action must be upstream of GAMyb. Furthermore, TaABF1 and ABA demonstrated an additive effect on the suppression of Amy32b. Based on our findings, we propose a model in which PKABA1 activates two separate targets, one being TaABF1 which then modifies an unknown target upstream of GAMyb and the other being an unknown transcription factor that suppresses GAMyb transcription.

Estudo de pelotização e briquetagem de finos de carvão mineral

O aumento da produção de carvão previsto para os próximos anos nas minas da CRM localizadas em Leão, Butiá, RS, originará uma considerável quantidade de finos beneficiados por ciclonagem autôgena. Estes finos caracterizam-se pelos seus altos teores de umidade e granulometria <1 mm o que onera e dificulta os processos de manuseio, estocagem e transporte. O presente estudo visa à análise comparativa dos processos de aglomeração, a briquetagem e a pelotização com o objetivo de obter um produto com melhores características de comercialização do que o atual. As principais variáveis estudadas na aglomeração por briquetagem foram: teor de umidade, tipo e concentração de agente ligante, relação massa/volume de carvão, tempo e pressão de moldagem. Os melhores resultados em termos de resistência à compressão, foram obtidos utilizando um resíduo de refinaria de petróleo - REVAC - como ligante numa concentração de 10% em peso, uma temperatura de cura de 120° C, um tempo de moldagem de 0,5 minutos e uma pressão de compactação entre 150 e 250 kgf/cm². A pelotização foi estudada utilizando um tambor e um disco de laboratório e as principais variáveis estudadas foram: umidade da alimentação, tipo e concentração de agente ligante, temperatura de cura e outras. Os melhores resultados foram obtidos utilizando como ligante MOGUL (amido de milho pré-gelatinizado em pó) numa concentração de 5% em peso, uma faixa de umidade ótima entre 30 e 40%, uma inclinação do disco entre 45 e 51° e uma temperatura de cura de 80 e 100°C. Os resultados obtidos para ambos os carvões (CE 5900 e CE 4700) são discutidos em termos dos diversos fenômenos que ocorrem na interface carvão-solução-ligante e algumas considerações econômicas são apresentadas.

Tratamento de soluções de cromo (III) por flotação a ar dissolvido

O presente trabalho estuda a viabilidade da utilização do processo de flotação a ar dissolvido (FAD) no tratamento de efluentes contendo cromo. Tal processo é analisado comparativamente à sedimentação. Urna revisão dos diferentes tipos de processos de separação ou de recuperação do cromo é, também, aqui apresentada. Soluções contendo 200 mg.l" de cromo tri ou hexavalente foram estudadas quanto às condições ideais de precipitação, às características de sedimentação e de flotação a ar dissalvido em regime descontínuo e contlnuo. Agentes poliméricos foram testados no intuito de melhorar as condições de clarificação. O processo de FAD foi o que apresentou melhores resultados no que se refere a cinética de separação sólido/líquido, e em termos de clarificação das soluções. Estudos de separação sólido/líquido de soluções contendo cromo VI foram feitos por estes dois processos empregando sulfato ferroso e sulfito de sódio como agentes redutores. A FAD mostrou ser eficiente para tratar as soluções quando reduzidas com sulfito de sódio. Porém, no caso da utilização do sulfato ferroso como redutor, o rendimento da FAD diminuiu no tratamento de soluções que continham sólidos suspensos acima de uma concentração crítica. Polímeros também foram empregados neste caso, e confirmaram sua atuação melhorando a cinética de separação sólido/líquido e como agentes que beneficiam a clarificação das soluções. Os resultados dos estudos de flotação por ar dissolvido em uma unidade contínua mostraram que é viavel a FAD sem agentes floculantes ou tensoativos. No entanto, estes aumentam os níveis de clarificação das soluções. Apenas os floculantes a base de amido mostraram-se ineficientes nesta aplicação. Conclui-se que o processo de FAD pode ser utilizado no tratamento de efluentes contendo cromo permitindo obter efluentes finais dentro dos padrões de emissão da legislação brasileira.

Dietas de proteína reduzida e de diferentes digestabilidades suplementadas com aminoácidos sintéticos para frangos de corte

O conceito de proteína ideal adquiriu grande importância, devido à necessidade de maximizar o uso dos aminoácidos para a deposição de proteína corporal. O objetivo deste trabalho foi avaliar a formulação de rações com teor reduzido de PB suplementadas com aminoácidos sintéticos e de diferentes digestibilidades. Foram realizados dois experimentos (exp) utilizando frangos de corte machos das linhagens Ross (exp I) e Cobb (exp 11),no período de 3 a 6 semanas. No exp I foram testadas rações à base de milho e farelo de soja com quatro níveis de PB (20,8; 19,7; 18,6 e 17,5%). No exp 11,além dos tratamentos com os mesmos níveis de PB do exp I e digestibilidade padrão (DP), compostos principalmente por milho e farelo de soja, também foram testados dois tratamentos com dietas contendo 20,8 e 17,5% de PB e alta digestibilidade (AD), à base de milho, farelo de soja, amido de milho e proteína isolada de soja. Nos dois experimentos o ganho de peso, a conversão alimentar e o rendimento de cortes nobres foram negativamente afetados pela redução da PB dietética (P<0,05). Entretanto, as respostas de digestibilidade da matéria seca e digestibilidade da matéria orgânica, a retenção relativa de PB e a energia metabolizável aparente corrigida para nitrogênio foram superiores nas aves alimentadas com as dietas de baixos níveis de PB (P<0,05), mas não suficientes para compensar as perdas no desempenho. Não houve efeito da dieta AD sobre as respostas avaliadas, talvez em função das características físicas dos ingredientes utilizados.

Criação de mercado de créditos de biocombustível avançado para geração de economia financeira e ambiental no comércio de etanol entre Brasil e Estados Unidos

O comércio de etanol entre Brasil e Estados Unidos é fortemente guiado por uma assimetria regulatória, que agrega valor ao etanol brasileiro ao gerar uma de-manda americana pelo produto derivado da cana de açúcar. A demanda advém dos mandatos de consumo de biocombustíveis estabelecidos no programa americano conhecido como Renewable Fuel Standard (RFS). A assimetria emerge pelo fato de RFS dar ao etanol brasileiro a classificação de Biocombustível Avançado, tornando-o para os Estados Unidos um produto mais nobre que o etanol derivado do amido de milho produzido domesticamente. Apesar dos processos produtivos tornarem os dois produtos diferenciados quanto ao teor de emissão de CO2 em seus ciclos de vida, o produto final é o mesmo: etanol anidro combustível. Portanto, quando a aquisição de etanol brasileiro pelos Estados Unidos é tal que torna o balanço do-méstico de oferta e demanda deficitário no Brasil, faz-se necessária a importação brasileira de etanol americano. Esse vai e vem do produto ocorre de forma simultâ-nea e, por isso, considera-se a existência de um fluxo redundante de etanol, geran-do custos logísticos, transacionais e emissões de CO2 que poderiam ser evitados. Dado que o objeto do interesse americano pelo produto brasileiro é o baixo índice de emissões de CO2 no ciclo de vida do etanol de cana de açúcar, o fluxo redun-dante de etanol pode ser substituído por transações de Créditos de Biocombustível Avançado, uma nova ideia que é desenvolvida ao longo deste trabalho. Para cada Crédito transacionado, os Estados Unidos contabilizarão em seu balanço a emissão de CO2 correspondente ao volume equivalente de etanol de cana de açúcar, trans-ferindo para o Brasil as emissões correspondentes ao mesmo volume de etanol de-rivado do amido de milho. A substituição do fluxo físico pela transação de contratos é a fonte de economia proposta no título deste trabalho.

Utilização da Berberina na Identificação dos Mastócitos do Molusco Anomalocardia brasiliana

Berberine is an alkaloid used as a fluorochrome in the identification of heparin and DNA. Enerback, 1974, described the technique used until today to study granules rich in heparin of vertebrate mast cells. Santos et al., 2003, studied mast cells of the mollusk Anomalocardia brasiliana using biochemical and histological analysis. This work used the fluorescent dye berberine technique to improve characterization of these cells. Mollusk organs (ctenidium and mantle) were processed with routine histological techniques. Tissue sections were treated with berberine 0,02% in redistilled water acidified to pH 4, by the addition of citric acid for 20 minutes. The visualization was made through fluorescence microscopy with ultraviolet region emission. The mast cell fluorescence had a strong yellow color, where cell nuclei appeared more greenish. This result was very similar to the ones reported before. Mast cells are location at the epithelium surface is the same in both organs, mantle and ctenidium. The fluorescence was easily observed in the granules. Therefore, this technique showed to be good and sensitive to study mast cell of invertebrates

Regulação da mobilização de lipídios e proteinas por hormônios, fontes de carbono e nitrogênio durante o crescimento pos-germinativo em girassol

The mobilization of food reserves in storage tissues and allocation of their hydrolysis products in the growing axis are critical processes for the establishment of seedlings after germination. Therefore, it is crucial for mobilization of reserves to be synchronized with the growing axis, so that photosynthetic activity can be started before depletion of reserves. For this, integrative approaches involving different reserves, different hydrolysis products and interaction between storage and growing axis tissues, either through hormones or metabolites with signaling role, can contribute greatly to the elucidation of the regulation mechanisms for reserve mobilization. In this study, was hypothesized that hormones and metabolites have different actions on reserve mobilization, and there must be a crossed effect of sugars on the mobilization of proteins and amino acids on lipids and starch mobilization in sunflower seedlings. This study was conducted with seeds of sunflower (Helianthus annuus L.) hybrid Helio 253 using in vitro culture system. Seeds were germinated on Germitest® paper and grown on agar-water 4 g/L without addition of nutrients during 9 days after imbibition (DAI) for growth curve. To verify the effect of metabolites and hormones, seedlings were transferred in the 2nd DAI to agar-water 4 g/L supplemented with increasing concentrations of sucrose or L-glutamine, abscisic acid, gibberellic acid or indolebutyric acid. The results of this study confirm that the mobilization of lipids and storage proteins occurs in a coordinated manner during post-germination growth in sunflower, corroborating the hypothesis that the application of external carbon (sucrose) and nitrogen (L-glutamine) sources can delay the mobilization of these reserves in a crossed way. Moreover, considering the changes in the patterns of reserve mobilization and partition of their products in seedlings treated with different growth regulators, it is evident that the effects of metabolites and hormones must involve, at least in part, distinct mechanisms of action

Biocompósitos poliméricos obtidos a partir da fração lignocelulósica e amilácea do caroço de manga (mangifera indica), Tommy atkins

This employment has the function the utilization of mango seeds Tommy Atkins, like starch source to obtain biopolymers and fibers source and nanowhiskers cellulose also, that will be use like reinforcing fillers in micro and nanobiocomposites polymeric. The fibers in natura removed from tegument mango seed were characterized, as weel as the treated fibers and nanowhiskers of cellulose extracted from them. The starch extracted from seed s almond showed a good performance (32%) and a high purity. The chemicals analyzes, of crystallinity and morphological of the fibers in natura, treated fibers and nanowhiskers of cellulose confirmed the efficacy of the chemical treatement performed to remove amorphous constituents (hemicellulose and lignina). The thermoplastic starch (TPS) obtained from two sources, corn starch and starchy material mango, was produced in a twin screw extruder with compositon mass of 62,5% of starch, 9,4% of water and 28,1% of glycerol. The starch material mango was the main objective of this work for the production of biodegradable materials, and the starch corn was utilized during the production stage to evaluate the processability of the starch and use as parameter for comparison, according of being a conventional source for obtaining conventional comercial starch. The incorporation of fibers (6% in mass) and nanowhiskers cellulose (1% in mass) in matrix of TPS to obtain composite and nanocomposite, respectively, it was performed in single screw extruder. The biocomposites and bionanocomposites polymeric were obtained and the TPS from starchy material mango presented better results of thermal and mechanicals properties when compared to TPS corn starch. Concludes that the sediment generated of the agroindustrial processing mango used presents potencial to producing of biodegradables materials

Desenvolvimento de bioblendas poliméricas a partir de gelatina bovina e de tilápia com amido de milho

The natural raw materials acquired special importance beside the mineral raw materials with the need for using alternative sources to oil, because they can be used to produce biopolymers. Gelatin, produced from the denaturation of collagen, and starch, an abundant polysaccharide in various plants, are examples of biopolymers which have several technological applications, especially in films. The objective of this work is to produce polymeric bioblends with gelatin and corn starch using two types of gelatin: commercial bovine gelatin and gelatin produced from mechanically separated flesh of tilapia (Oreochromis niloticus). For the extraction of tilapia gelatin 3 distinct pretreatments, followed by extraction in distilled water under heating were performed. The properties of gelatin extracted were similar to bovine gelatin, and the differences can be explained by the difference in extraction processes and sources. Blends of commercial gelatin and starch were produced in an internal mixer from a Haake torque rheometer, to study the behavior of the gelatin mixture with starch, thus, the same compositions were processed by twin screw extrusion, to define the mixing parameters. Subsequently, the extrusion of blends of tilapia gelatin and corn starch was carried out in the same twin screw extruder. The physico-chemical, rheological and morphological properties of the blends with thermoplastic starch and gelatin were studied. It was found that various properties vary linearly with increasing concentration of the components. The blends produced are immiscible, and among the two gelatins, tilapia gelatin showed a better interfacial adhesion with the corn starch. Regarding the morphology, gelatins formed the dispersed phase in all compositions studied, even in compositions rich in starch. Can be concluded that the procedure for tilapia gelatin extraction is feasible and advantageous, and the increasing in its scale to a reactor of 30 liters is possible, with a satisfactory yield. The bioblends of bovine gelatin/corn starch and tilapia gelatin/corn starch were successfully produced, and the processing conditions were appropriate

Ultramorphology and histochemistry of fat body cells from last Instar larval of the Pachycondyla (=Neoponera) villosa (Fabricius) (Formicidae: Ponerinae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structural and ultrastructural characteristics of interrenal gland and chromaffin cell of matrinxa, Brycon cephalus Gunther 1869 (Teleostei-Characidae)

This work presents the structure and ultrastructure of the interrenal gland and chromaffin cells, as well as the morphology of the head kidney of Brycon cephalus, the head kidney is composed of fused bilateral lobes located anterior to the swim bladder and ventrolateral to the spinal column, the parenchyma revealed lympho-haematopoietic tissue, melano-macrophage centres, interrenal gland and chromaffin cells. The interrenal gland consisted of cords or strands of cells grouped around the posterior cardinal vein and their branches. Chromaffin cells are found in small groups, closely associated with the interrenal gland and/or under the endothelium of the posterior cardinal vein. So far, the ultrastructural analysis has revealed only one interrenal cell type which contained abundant smooth endoplasmic reticulum and numerous mitochondria with tubulo-vesicular cristae, characteristic of steroid-producing cells. Two types of chromaffin cells were observed. The first type was characterized by the presence of vesicles with round, strongly electron-dense granules, which were eccentrically located, Such cells were interpreted as noradrenaline cells, Meanwhile, cells which contained smaller vesicles and electron-lucent granules, with a small halo separating the granule from the vesicular limiting membrane, were identified as adrenaline cells.