The Experience of the Religious through Silent Moving Image and the Silence of Bill Viola's Passions

With the creationof the moving image at the end of the 19th century a new way of representing and expressing the Religious was born. The cinema industry rapidly understood that film has a powerful way to attract new audiences and transformed the explicit religious message into an implicit theological discourse of the fictional film. Today, the concept of "cinema" needs to be rethought and expanded, as well as the notion of "tTranscendental" since the strong reality effect of the film can allow a true religious experience for the spectator.

O ensino e aprendizagem do gráfico da função quadrática com e sem auxílio do Software Winplot

RESUMO: A utilização adequada das TIC no ensino da Matemática, nos dias de hoje é considerada por alguns como justificada e inevitável, esperando que a sua utilização melhore o ensino e a aprendizagem da Matemática. Nesta investigação, pretende-se testar o Software Winplot), no ensino e aprendizagem do gráfico da função quadrática com alunos do 10ºano, da Escola do segundo ciclo do Ensino Secundário nº9099, de modo a verificar se melhora o ensino e na aprendizagem desta temática.Para a nossa investigação Seleccionámos dois grupos de alunos do 10º ano que funcionaram como grupo de controlo e grupo experimental; depois de ambos os grupos terem realizado dois pré-testes, o grupo experimental realizou as aprendizagens no laboratório de informática com auxílio do Software Winplot, ao longo de 8 semanas, durante o 2º trimestre do ano lectivo de 2009/2010. O grupo de controlo realizou as aprendizagens, ao mesmo tempo que o grupo experimental, na sala normal de aulas sem auxílio do Software Winplot.Ao compararmos os dois grupos, o teste T de pares para amostras independentes, mostra-nos que estatisticamente não há diferenças significativas entre os dois grupos, porque os níveis de significância são maiores que p=0,05, desta feita podemos dizer que o grupo experimental, não obteve melhores resultados que o grupo de controlo, logo o Software Winplot não resultou o efeito desejado nas aprendizagens com alunos da 10ºano da Escola do segundo ciclo do ensino Secundário nº9099, sita no município de Viana (Luanda/Angola). ABSTRACT:The appropriate use of ICTs in teaching mathematics, today is considered by somo to be justified and inevitable, hoping that their use will improve the teaching and learning of mathematics.In this investigation, we intend to test the Software Winplot, teaching and learning of the graph of quadratic functions with students of grade 10, attending the second cycle of secondary School nº9099 in order to verify that improves teaching and learning of this subject.For our research selected two groups of students in 10th grade who acted as the controlo group and experimental group, after both group had undergone two pre-test, the experimental group performed the learning in the computer lab with the aid of Software Winplot, over 8 weeks during the second quarter of the academic year 2009/2010. Thr control gropu performed the learning, while the experimental group, in rregular class room without help of the Software Winplot.Comparing the two groups, the t test for independent samples pairs, shows us that there is no statistically significant differences between the two groups, because the significance levels are greater than p=0,05, this time we can say that experimental group, not yielded better results than the control group, so the Software did not result the desired effect on the learning with students from 10th grade of the School of the second cycle of Secondary nº9099, located in Viana (Luanda/Angola).

Segurança alimentar nos refeitórios de uma universidade portuguesa : aplicação da teoria do comportamento planeado

A Organização Mundial de Saúde estima que nos países mais industrializados uma em cada três pessoas sofra, por ano, de uma doença de origem alimentar. De acordo com os dados da Agência Europeia para a Segurança Alimentar foram relatados pelos 27 Estados Membros da União Europeia, no ano 2012, um total de 5.363 surtos de origem alimentar, assistindo-se a uma prevalência do setor da restauração, como o local de maior ocorrência dos surtos de doenças de origem alimentar. Para o mesmo ano, Portugal reportou 7 surtos de origem alimentar, envolvendo 135 pessoas com 42 hospitalizações. Neste contexto, a aplicação de boas práticas de higiene, nomeadamente no setor da restauração, é essencial para proteger o consumidor das doenças de origem alimentar. Neste estudo, pretendeu-se identificar os constructos do modelo da Teoria do Comportamento Planeado (Theory of Planned Behaviour – TPB, segundo a terminologia anglo-saxónica), de Icek Ajzen, que melhor explicam a intenção dos operadores de alimentos em adotarem os comportamentos de higiene, a saber: i) utilização de luvas e touca de proteção de cabelos, e ii) remoção de adornos pessoais, durante a manipulação de alimentos. Para o efeito, foi aplicado um questionário tendo por base a Teoria do Comportamento Planeado, a uma amostra de cento e vinte e três operadores dos vários refeitórios de uma universidade portuguesa, na sua grande maioria do sexo feminino (91,1%) e que manipulam alimentos numa base diária, recorrendo-se primeiramente a uma fase preliminar de estudo qualitativo, ou pré-inquérito, para melhor selecionar os temas essenciais e as principais categorias a considerar na construção deste inquérito. Os inquéritos foram tratados estatisticamente recorrendo-se à estatística descritiva, à análise fatorial e avaliação da consistência interna dos fatores resultantes, seguido da aplicação de regressão linear e metodologia de análise de trajetórias (path modeling) com vista à validação do TPB. Os resultados obtidos apontam para o fato de a Atitude ser o melhor preditor da Intenção em adotar os comportamentos em estudo. Verificou-se também que a motivação de cumprir resulta da pressão exercida pelos superiores hierárquicos ou colegas, influenciando positivamente a intenção, na medida em que as crenças normativas assumiram-se como sendo o segundo preditor que melhor previu a intenção.

"Second Life": quando o cinema abdica de ser o lugar que nos habita por dentro

O projecto “Principais tendências no cinema português contemporâneo” nasceu no Departamento de Cinema da ESTC, com o objectivo de desenvolver investigação especializada a partir de um núcleo formado por alunos da Licenciatura em Cinema e do Mestrado em Desenvolvimento de Projecto Cinematográfico, a que se juntaram professores-investigadores membros do CIAC e convidados. O que agora se divulga corresponde a dois anos e meio de trabalho desenvolvido pela equipa de investigação, entre Abril de 2009 e Novembro de 2011. Dada a forma que ele foi adquirindo, preferimos renomeá-lo, para efeitos de divulgação, “Novas & velhas tendências no cinema português contemporâneo”.

Solutions of second-order and fourth-order ODEs on the half-line

We start by studying the existence of positive solutions for the differential equation u '' = a(x)u - g(u), with u ''(0) = u(+infinity) = 0, where a is a positive function, and g is a power or a bounded function. In other words, we are concerned with even positive homoclinics of the differential equation. The main motivation is to check that some well-known results concerning the existence of homoclinics for the autonomous case (where a is constant) are also true for the non-autonomous equation. This also motivates us to study the analogous fourth-order boundary value problem {u((4)) - cu '' + a(x)u = vertical bar u vertical bar(p-1)u u'(0) = u'''(0) = 0, u(+infinity) = u'(+infinity) = 0 for which we also find nontrivial (and, in some instances, positive) solutions.

Tuning Iris Recognition for Noisy Images

The use of iris recognition for human authentication has been spreading in the past years. Daugman has proposed a method for iris recognition, composed by four stages: segmentation, normalization, feature extraction, and matching. In this paper we propose some modifications and extensions to Daugman's method to cope with noisy images. These modifications are proposed after a study of images of CASIA and UBIRIS databases. The major modification is on the computationally demanding segmentation stage, for which we propose a faster and equally accurate template matching approach. The extensions on the algorithm address the important issue of pre-processing that depends on the image database, being mandatory when we have a non infra-red camera, like a typical WebCam. For this scenario, we propose methods for reflection removal and pupil enhancement and isolation. The tests, carried out by our C# application on grayscale CASIA and UBIRIS images show that the template matching segmentation method is more accurate and faster than the previous one, for noisy images. The proposed algorithms are found to be efficient and necessary when we deal with non infra-red images and non uniform illumination.

Digital radiography detectors - A technical overview: Part 2

Digital X-ray detector technologies provide several advantages when compared with screen-film (SF) systems: better diagnostic quality of the radiographic image, increased dose efficiency, better dynamic range and possible reduction of radiation exposure to the patient. The transition from traditional SF systems to digital technology-based systems highlights the importance of the discussion around technical factors such as image acquisition, themanagement of patient dose and diagnostic image quality. Radiographers should be aware of these aspects concerning their clinical practice regarding the advantages and limitations of digital detectors. Newdigital technologies require an up-to-date of scientific knowledge concerning their use in projection radiography. This is the second of a two-part review article focused on a technical overview of digital radiography detectors. This article provides a discussion about the issues related to the image acquisition requirements and advantages of digital technologies, the management of patient dose and the diagnostic image quality.

Leanness na manutenção aeronáutica: o caso FAP

Os sistemas de armas da Força Aérea Portuguesa (FAP) têm por missão a defesa militar de Portugal, através de operações aéreas e da defesa do espaço aéreo nacional, sendo o F-16 o principal avião de ataque em uso nesta organização. Neste sentido, e tendo em conta o actual contexto económico mundial, as organizações devem rentabilizar todos os recursos disponíveis, custos associados e optimizar processos de trabalho. Tendo por base os pressupostos anteriores, o presente estudo pretende analisar a implementação de lean na FAP, uma vez que esta filosofia assenta na eliminação de desperdícios com vista a uma melhoria da qualidade e diminuição de tempos e custos. Posto isto, a análise deste trabalho vai recair sobre a área de manutenção do F-16, em concreto na Inspeção de Fase (IF), um tipo de manutenção que esta aeronave realiza a cada trezentas horas de voo. O estudo de caso vai incidir em dois momentos da IF: o primeiro ponto relaciona-se com o processamento da recolha de dados para a reunião preliminar onde são definidas, para as áreas de trabalho executantes, as ações de manutenção a realizar com a paragem da aeronave. Deste modo, pretende-se averiguar as causas inerentes aos atrasos verificados para a realização desta reunião. O segundo ponto em observação compreende a informação obtida através da aplicação informática SIAGFA, em uso na FAP, para o processamento de dados de manutenção das quatro aeronaves que inauguraram a IF com a filosofia lean. Esta análise permitiu perceber o número de horas de trabalho dispendidas (em média pelas quatro aeronaves) por cada uma das cartas de trabalho, verificando-se que as cartas adicionais comportam mais horas; foi possível compreender quais as áreas de trabalho consideradas críticas; foram identificados os dias de trabalho realizado e tempos de paragem sem qualquer tipo de intervenção. Foi ainda avaliado, por aeronave, o número de horas de trabalho realizadas na IF e quais os constrangimentos que se verificaram nas aeronaves, que não realizaram a IF no tempo definido para tal.

A non-pixel image reader for continuous image detection based on tandem heterostructures

An optically addressed read-write sensor based on two stacked p-i-n heterojunctions is analyzed. The device is a two terminal image sensing structure. The charge packets are injected optically into the p-i-n writer and confined at the illuminated regions changing locally the electrical field profile across the p-i-n reader. An optical scanner is used for charge readout. The design allows a continuous readout without the need for pixel-level patterning. The role of light pattern and scanner wavelengths on the readout parameters is analyzed. The optical-to-electrical transfer characteristics show high quantum efficiency, broad spectral response, and reciprocity between light and image signal. A numerical simulation supports the imaging process. A black and white image is acquired with a resolution around 20 mum showing the potentiality of these devices for imaging applications.

A two terminal optical signal and image processing p-i-n/p-i-n image and colour sensor

A two terminal optically addressed image processing device based on two stacked sensing/switching p-i-n a-SiC:H diodes is presented. The charge packets are injected optically into the p-i-n sensing photodiode and confined at the illuminated regions changing locally the electrical field profile across the p-i-n switching diode. A red scanner is used for charge readout. The various design parameters and addressing architecture trade-offs are discussed. The influence on the transfer functions of an a-SiC:H sensing absorber optimized for red transmittance and blue collection or of a floating anode in between is analysed. Results show that the thin a-SiC:H sensing absorber confines the readout to the switching diode and filters the light allowing full colour detection at two appropriated voltages. When the floating anode is used the spectral response broadens, allowing B&W image recognition with improved light-to-dark sensitivity. A physical model supports the image and colour recognition process.

Enhanced short wavelength response in laser-scanned-photodiode image sensor using an a-SiC : H/a-Si : H tandem structure

We report in this paper the recent advances we obtained in optimizing a color image sensor based on the laser-scanned-photodiode (LSP) technique. A novel device structure based on a a-SiC:H/a-Si:H pin/pin tandem structure has been tested for a proper color separation process that takes advantage on the different filtering properties due to the different light penetration depth at different wavelengths a-SM and a-SiC:H. While the green and the red images give, in comparison with previous tested structures, a weak response, this structure shows a very good recognition of blue color under reverse bias, leaving a good margin for future device optimization in order to achieve a complete and satisfactory RGB image mapping. Experimental results about the spectral collection efficiency are presented and discussed from the point of view of the color sensor applications. The physics behind the device functioning is explained by recurring to a numerical simulation of the internal electrical configuration of the device.

Image and color recognition using amorphous silicon p-i-n photodiodes

Large area hydrogenated amorphous silicon single and stacked p-i-n structures with low conductivity doped layers are proposed as monochrome and color image sensors. The layers of the structures are based on amorphous silicon alloys (a-Si(x)C(1-x):H). The current-voltage characteristics and the spectral sensitivity under different bias conditions are analyzed. The output characteristics are evaluated under different read-out voltages and scanner wavelengths. To extract information on image shape, intensity and color, a modulated light beam scans the sensor active area at three appropriate bias voltages and the photoresponse in each scanning position ("sub-pixel") is recorded. The investigation of the sensor output under different scanner wavelengths and varying electrical bias reveals that the response can be tuned, thus enabling color separation. The operation of the sensor is exemplified and supported by a numerical simulation.

Large area image sensing structures based on a-SiC : H: a dynamic characterization

In recent works large area hydrogenated amorphous silicon p-i-n structures with low conductivity doped layers were proposed as single element image sensors. The working principle of this type of sensor is based on the modulation, by the local illumination conditions, of the photocurrent generated by a light beam scanning the active area of the device. In order to evaluate the sensor capabilities is necessary to perform a response time characterization. This work focuses on the transient response of such sensor and on the influence of the carbon contents of the doped layers. In order to evaluate the response time a set of devices with different percentage of carbon incorporation in the doped layers is analyzed by measuring the scanner-induced photocurrent under different bias conditions.

Laser scanned photodiodes (LSP) for Image sensing

An optimized ZnO:Al/a-pin SixCl1-x:H/Al configuration for the laser scanned photodiode (LSP) imaging detector is proposed. The LSP utilizes light induced depletion layers as detector and a laser beam for readout. The effect of the sensing element structure, cell configuration and light source flux are investigated and correlated with the sensor output characteristics. Experimental data reveal that the large optical gap and the low conductivity of the doped a-SixC1-x:H layers are responsible by an induced inversion layer at the illuminated interfaces which blocks the carrier collection. These insulator-like layers act as MIS gates preventing image smearing. The physical background of the LSP is discussed.

Laser scanned photodiodes (LSPs) for image sensing

An optimized ZnO:Al/a-pin SixC1-x:H/Al configuration for the laser scanned photodiode (LSP) imaging detector is proposed and the read-out parameters improved. The effect of the sensing element structure, cell configuration and light source flux are investigated and correlated with the sensor output characteristics. Data reveals that for sensors with wide band gap doped layers an increase on the image signal optimized to the blue is achieved with a dynamic range of two orders of magnitude, a responsivity of 6 mA W-1 and a sensitivity of 17 muW cm(-2) at 530 nm. The main output characteristics such as image responsivity, resolution, linearity and dynamic range were analyzed under reverse, forward and short circuit modes. The results show that the sensor performance can be optimized in short circuit mode. A trade-off between the scan time and the required resolution is needed since the spot size limits the resolution due to the cross-talk between dark and illuminated regions leading to blurring effects.