Estimating Local Part Thickness in Midplane Meshes for Finite Element Analysis

Within the development of motor vehicles, crash safety (e.g. occupant protection, pedestrian protection, low speed damageability), is one of the most important attributes. In order to be able to fulfill the increased requirements in the framework of shorter cycle times and rising pressure to reduce costs, car manufacturers keep intensifying the use of virtual development tools such as those in the domain of Computer Aided Engineering (CAE). For crash simulations, the explicit finite element method (FEM) is applied. The accuracy of the simulation process is highly dependent on the accuracy of the simulation model, including the midplane mesh. One of the roughest approximations typically made is the actual part thickness which, in reality, can vary locally. However, almost always a constant thickness value is defined throughout the entire part due to complexity reasons. On the other hand, for precise fracture analysis within FEM, the correct thickness consideration is one key enabler. Thus, availability of per element thickness information, which does not exist explicitly in the FEM model, can significantly contribute to an improved crash simulation quality, especially regarding fracture prediction. Even though the thickness is not explicitly available from the FEM model, it can be inferred from the original CAD geometric model through geometric calculations. This paper proposes and compares two thickness estimation algorithms based on ray tracing and nearest neighbour 3D range searches. A systematic quantitative analysis of the accuracy of both algorithms is presented, as well as a thorough identification of particular geometric arrangements under which their accuracy can be compared. These results enable the identification of each technique’s weaknesses and hint towards a new, integrated, approach to the problem that linearly combines the estimates produced by each algorithm.

Organizational and accounting change within the context of the environmental agenda: evidence from Portugal

Purpose – The purpose of this paper is to explore the process of organizational change undergone by a large Portuguese business group within the context of the environmental agenda and the role of accounting as a mechanism for change. Design/methodology/approach – The paper reports the results of a case study conducted between 2006 and 2009. Information was obtained from semi-structured interviews and secondary sources. Organizational changes were analyzed using Laughlin’s model in order to identify which category reflected most of the changes introduced to address environmental matters. Findings – This paper offers evidence that change is not a homogeneous phenomenon. Additionally, it confirms previous studies’ findings which found that accounting did not play a significant role in the process of organizational change within the context of the environmental agenda. Originality/value – This paper seeks to complement the research in this area by integrating observations from a case study into an existing model of levels of organizational change according to how a Portuguese business group incorporated environmental issues into its processes, policies and corporate culture.

Carbon Nanofiber Type and Content Dependence of the Physical Properties of Carbon Nanofiber Reinforced Polypropylene Composites

The variation of the physical properties of four differ- ent carbon nanofibers (CNFs), based-polymer nano- composites incorporated in the same polypropylene (PP) matrix by twin-screw extrusion process was investigated. Nanocomposites fabricated with CNFs with highly graphitic outer layer revealed electrical isolation-to-conducting behaviors as function of CNF’s content. Nanocomposites fabricated with CNFs with an outer layer consisting on a disordered pyro- litically stripped layer, in contrast, revealed better mechanical performance and enhanced thermal sta- bility. Further, CNF’s incorporation into the polymer increased the thermal stability and the degree of crystallinity of the polymer, independently on the filler content and type. In addition, dispersion of the CNFs’ clusters in PP was analyzed by transmitted light opti- cal microscopy, and grayscale analysis (GSA). The results showed a correlation between the filler concentration and the variance, a parameter which measures quantitatively the dispersion, for all composites. This method indicated a value of 1.4 vol% above which large clusters of CNFs cannot be dispersed effectively and as a consequence only slight changes in mechanical performance are observed. Finally, this study establishes that for tailoring the physical properties of CNF based-polymer nanocomposites, both adequate CNFs structure and content have to be chosen.

Automatic segmentation and 3D feature extraction of protein aggregates in Caenorhabditis Elegans

In the last years, it has become increasingly clear that neurodegenerative diseases involve protein aggregation, a process often used as disease progression readout and to develop therapeutic strategies. This work presents an image processing tool to automatic segment, classify and quantify these aggregates and the whole 3D body of the nematode Caenorhabditis Elegans. A total of 150 data set images, containing different slices, were captured with a confocal microscope from animals of distinct genetic conditions. Because of the animals’ transparency, most of the slices pixels appeared dark, hampering their body volume direct reconstruction. Therefore, for each data set, all slices were stacked in one single 2D image in order to determine a volume approximation. The gradient of this image was input to an anisotropic diffusion algorithm that uses the Tukey’s biweight as edge-stopping function. The image histogram median of this outcome was used to dynamically determine a thresholding level, which allows the determination of a smoothed exterior contour of the worm and the medial axis of the worm body from thinning its skeleton. Based on this exterior contour diameter and the medial animal axis, random 3D points were then calculated to produce a volume mesh approximation. The protein aggregations were subsequently segmented based on an iso-value and blended with the resulting volume mesh. The results obtained were consistent with qualitative observations in literature, allowing non-biased, reliable and high throughput protein aggregates quantification. This may lead to a significant improvement on neurodegenerative diseases treatment planning and interventions prevention

Qualifound – a modular tool developed for quality improvement in foundries

Purpose – Castings defects are usually easy to characterize, but to eradicate them can be a difficult task. In many cases, defects are caused by the combined effect of different factors, whose identification is often difficult. Besides, the real non-quality costs are usually unknown, and even neglected. This paper aims to describe the development of a modular tool for quality improvement in foundries, and its main objective is to present the application potential and the foundry process areas that are covered and taken into account. Design/methodology/approach – The integrated model was conceived as an expert system, designated Qualifound, which performs both qualitative and quantitative analyses. For the qualitative analyses mode, the nomenclature and the description of defects are based on the classification suggested by the International Committee of the Foundry Technical Association. Thus, a database of defects was established, enabling one to associate the defects with the relevant process operations and the identification of their possible causes. The quantitative analysis mode deals with the number of produced and rejected castings and includes the calculation of the non-quality costs. Findings – The validation of Qualifound was carried out in a Portuguese foundry, whose quality system had been certified according to the ISO 9000 standards. Qualifound was used in every management area and it was concluded that the application had the required technological requisites to provide the necessary information for the foundry management to improve process quality. Originality/value – The paper presents a successful application of an informatics tool on quality improvement in foundries.

Capital Intelectual: sua divulgação no setor bancário em Portugal

The importance of intangible resources has increased dramatically in recent years comparing to tangible ones. The economy in which we live is the result of competitive pressures that have imposed the implementation of business at an international level as well as a requirement in the application of sophisticated technologies that allow us to follow this fast evolution. In this age of information and innovation organizations will only survive if they are inserted in a global network of strategic relations, generically called as the network economy by Lev (2003). The service sector has stood out against the more traditional sectors of the economy. The intensive use of knowledge and a strong customer orientation created a new reality in today’s organizations: a growing importance attached to innovation, to the quality of products and services offered, to the information and communication technologies adopted, and to the creativity and particular abilities of human resources. The concept of intangible assets is more common in an accounting language and intellectual capital is most often applied in the context of management, being associated with a more comprehensive, multidimensional approach, representing all the knowledge that the institution owns and that it applies in the form of expertise, the creativity and organizational competencies that lead to innovation and to the sustained attainment of future economic benefits. An analysis of the scope of intellectual capital is fundamental to take more appropriate management decisions so that a more appropriate accounting treatment could be given by the accounting standardization organizations. This study intends to analyse the practices of information disclosure of the intellectual capital in the banking sector in Portugal, complementing the analysis of the disclosure of intangible assets in the context of accounting standards with the disclosure of intellectual capital in the context of organizational management. In particular, our main aims are to identify the extent of disclosure of intellectual capital made by banks in Portugal and also to identify the factors that determine such a disclosure. The disclosure in the context of accounting standards will be studied by checking the disclosure of intangible assets through the items listed in the International Accounting Standard 38 developed by the International Accounting Standards Board. The context of management was analysed by means of creating a voluntary disclosure index based on assumptions of the model Intellectus, developed by the Centro de Investigación sobre la Sociedad del Conocimiento – Instituto de Administración de Empresas (CIC-IADE) of the Universidad Autónoma of Madrid, and of the model Intellectual Capital Statement (made in Europe) (InCaS), both promoted by the European Commission and that we have adapted to the banking sector. When analysing the disclosure of intangible assets based on the context of accounting standards and the voluntary disclosure of intellectual capital, this study has tried to raise awareness about the importance of issuing reports on the intellectual capital as an alternative tool to take management decisions in the existing organizations and reflects the transparency and legitimacy that these institutions seek through a more extensive and more detailed information disclosure of their intellectual capital. Based on a complimentarily of economic theories, together with social and political theories, we tried to check the extent, evolution and tendencies of the compulsory disclosure of intangible assets and of the voluntary disclosure of the intellectual capital analysed in the period 2001-2011. Banks characteristics were also analysed in order to deduce those factors that determine or promote a larger disclosure in this sector. Based on these objectives, we adopted a longitudinal approach to explore the extent and the development of the disclosure of intangible assets as well as the factors that have determined it. Furthermore, we sought to assess the impact of the adoption of IAS 38 in the financial statements of the organizations in this sector. The disclosure index created on the basis of the disclosure requirements stated in IAS 38 from IASB was applied to the consolidated financial statements of the seventeen banks that rendered their statements in Portugal from 2001 to 2009. Since the information disclosed in the context of accounting standards may not have an important role as a management tool once it was not able to reflect what really contributes to the competitiveness and organizational growth, the voluntary disclosure of the intellectual capital was analysed according to the information obtained from the 2010 annual individual reports of the banks operating in Portugal in that year and from their respective websites in 2011. We tried to analyse the extent of the voluntary disclosure of the intellectual capital and of each of its components, human capital, structural capital and relational capital. The comparative analysis of their annual reports and their web pages allowed us to assess the incidence of the disclosure and discover what channel the banking sector focuses on when disclosing their intellectual capital. Also in this analysis the study of the disclosure determinants has allowed us to conclude about the influence of particular characteristics in the voluntary disclosure of the intellectual capital. The results of the analysis to the extent of the disclosure of intangible assets in the consolidated financial statements of the banking groups in Portugal in the period 2001-2009 have shown an average information disclosure of 0.24. This information disclosure evolved from an average value of 0.1940 in 2001 to 0.2778 in 2009. The average value is 0.8286 if it is only considered the disclosure of the intangible assets that the banks possessed. The evolution of this index means an increase in the average disclosure from 0.7852 in 2001 to 0.8788 in 2009. From the first results that are related to the extent of the disclosure of intangible assets in the financial statements, we can verify that the banking groups present a low disclosure level of these resources. However, when considering the disclosure of only the intangible assets that each institution owns, the disclosure level appears to be in compliance with the disclosure requirements for this sector. An evolution in the disclosure of intangible assets for the period considered was confirmed, showing an increase in the information disclosure of intangible assets in 2005, the year in which the accounting rules for intangible assets changed. The analysis that focused on the disclosure in the context of management tried to understand the extent, the incidence and the determinants of the voluntary information disclosure of intellectual capital in the annual reports of 2010 and on their web pages in 2011, studying the 32 banks operating in Portugal in this period. The average voluntary disclosure of the intellectual capital in the 2010 annual reports is 0.4342 while that in web pages is 0.2907. A review of the components of the intellectual capital allowed us to assess the importance that the banks confer to each of these components. The data obtained show that the relational capital, and more specifically the business capital, is the most disclosed component by banks in Portugal both in the annual reports and in their institutional web pages, followed by the structural capital and, finally, by the human capital. The disclosure of the human capital and the structural capital is higher in the annual reports than that in the websites, while the relational capital is more disclosed in the websites than in the annual reports. The results have also shown that the banks make a complementary use of both sources when disclosing information about their structural capital and relational capital but they do not show any information about their human capital in their websites. We tried to prove the influence of factors that could determine the accounting disclosure and the voluntary disclosure of the intellectual capital in this sector. The change in the IASB accounting rules as from January 1st 2005 gave a greater disclosure of accounting information of intangible assets in the financial statements of banks. The bank size and corporate governance measures have statistically proved to have an influence on the extent of the accounting disclosure of intangible assets and on the voluntary disclosure of the intellectual capital. Economic and financial variables such as profitability, operating efficiency or solvency were not determinants of information disclosure. The instability that the banking sector has experienced in economic and financial indicators in recent years as a result of the global financial markets imbalance has worsen indicators such as profitability, efficiency and solvency and caused major discrepancies in the economic situation between banks in Portugal. This empirical analysis has contributed to confront the disclosure required by accounting rules performed in the financial statements of organizations with that performed in the main disclosure media which is available for entities and which is increasingly requested in the process of taking management decisions. It also allowed us to verify whether there is homogeneity between institutions in the fulfilment of the requirements for information disclosure of intangible assets. However, as for voluntary disclosure of intellectual capital, there are large disparities in the disclosure extent between organizations. Regardless of this sector specific characteristics, the voluntary disclosure of intellectual capital made by banks in Portugal follows the trends in other sectors and the practices adopted in other countries, namely regarding the amount of information disclosed, the incidence of the disclosure on the indicators of relational capital and the importance of variables such as size as determinants of disclosure of intellectual capital. For a further knowledge in this field, we created a specific index for the banking sector, considering appropriate indicators for an incisive, comprehensive analysis in order to consider the most relevant indicators of intellectual capital components. Besides, confronting the analysis of disclosure in the context of accounting standards with the study of voluntary disclosure brought a new analysis approach to the research on intellectual capital disclosure. With this study, we have also intended to raise greater awareness of the need for harmonization in the intellectual capital disclosure on the part of the regulatory banking authority by means of a demanding, consistent and transparent report of intellectual capital with simple, clear, objective indicators so that those interested in disclosing intellectual capital information in the organizations in this sector may obtain more harmonized and comparable information. A research on the disclosure quality of intellectual capital, together with the application of other analysis methodologies in this sector, might be a promising approach for future research. Applying the voluntary disclosure index to the same sector in other countries may also contribute to the knowledge of disclosure practices in different geographical environments. We highlight the relevance of further studies contributing to the harmonization and consistency in the presentation of an intellectual capital report so as to enable organizations to disclose the resources that contribute most to their competitiveness and growth.

Integration of Individualized Management Systems (MSs) as an Aggregating Factor of Sustainable Value for Organizations: An Overview Through a Review of the Literature

Nowadays, there exist various standards for individual management systems (MSs), at least, one for each stakeholder. New ones will be published. An integrated management system (IMS) aims to integrate some or all components of the business into one coherent and efficient MS. Maximizing integration is more and more a strategic priority in that it constitutes an opportunity to eliminate and/or reduce potential factors of destruction of value for the organizations and also to be more competitive and consequently promote its sustainable success. A preliminary investigation was conducted on a Portuguese industrial company which, over the years, has been adopting gradually, in whole or in part, individualized management system standards (MSSs). A research, through a questionnaire, was performed with the objective to develop, in a real business environment, an adequate and efficient IMS-QES (quality, environment, and safety) model and to potentiate for the future a generic IMS model to integrate other MSSs. The strategy and research methods have taken into consideration the case study. It was obtained a set of relevant conclusions resulting from the statistical analyses of the responses to the survey. Globally, the investigation results, by themselves, justified and prioritized the conception of a model of development of the IMS-QES and consequent definition and validation of a structure of an IMS-QES model, to be implemented at the small- and medium-sized enterprise (SME) where the investigation was conducted.

La innovación de los procesos - diferenciación en los servicios turísticos

The innovation contributes to business success and increased competitive advantage, one of the concepts that has deserved more attention among researchers in the field of management. Innovation is not exclusive of tangible products or services and can naturally extend to the process itself, the organization or marketing. Although it is not easy to gather a universal concept for innovation, do not seem to be no doubt that its importance is such that allows the company to build on the foundations of this future development, regardless of past success. This work has as its central purpose the study of process innovation in the supply outlook for tourism, given its importance in achieving business success. The recognition of its value assumes it as a challenge, making it necessary to distinguish with product, marketing and organizational innovation, either in substance or in the organizational competencies. Will be presented in this work, a brief description (as well as evolution of the concept) as a way of contextualizing and, then, clarified the distinction between the concepts process innovation and innovation process. Search will bring together the key distinguishing features from the perspective of tourism as a means of achieving competitive advantage for business. We will also discuss implications for management and future studies.

Exploring the interdisciplinary process in design education

The work presented herein follows an ongoing research that aims to analyze methodological practices to be applied in Design Education. A reflection about methodological strategies in Design Education and the function of drawing in Design represents the beginning of this study. Then, we developed an interdisciplinary pedagogical experience with the Graphic Design 1st grade students from our institution (IPCA). In the current academic year, 2013/2014, we continue to evolve this project, introducing changes in the initial proposal. Major alterations focused on the aspects that could be strengthened in terms of interdisciplinarity. In this article, the authors describe those changes and discuss the outcomes of the novel proposal. As we have already reported, this investigation follows a reflection about working methods to be adopted in Design Education. This is in accordance with other previously published works that purpose the enlargement of Design into new knowledge fields such as Experience or Service Design, changing not only the role of the graphic designer, but also the skills required to be a professional designer (Alain Findelli, 2001), (Brian Lawson, 2006), (Ciampa-Brewer, 2010). Furthermore, concepts such as cooperation or multidisciplinary design, amongst others, have been frequently debated as design teaching strategies (Heller and Talarico, 2011, pp. 82-85). These educational approaches also have an impact on our research. The analysis of all these authors’ contributions together with a reflection on our teaching practice allowed us to propose an improved interdisciplinary intervention.

The strategic management of creation process and of change: a theoretical contribute from the perspective of tourism

The entrepreneurship and innovation have been gradually gaining ground in the academic community as a field of study. However, the interpretations surrounding fragmented, without a univocal definition. In last decades, tourism has received greater attention from researchers in various sciences, varying only by the different emphases considered: economic, social, cultural and environmental. As other emerging sectors in a modern economy, tourism is a dynamic and ever-changing industry. The study has as purpose to provide a better understanding regarding the essence of entrepreneurship: theoretical and practical implications from the perspective of tourism. Regarding the methodology used here, this is a conceptual paper with a literature review that brings together the major components of entrepreneurship and its implications tourist perspective and conceptual model of the dynamic nature of the Triggering Process and innovation (e.g. iTravey, Interactive Stores, Tourist Transportable Tower).

Integration of Standardized Management Systems: A Dilemma?

Abstract: The growing proliferation of management systems standards (MSSs), and their individualized implementation, is a real problem faced by organizations. On the other hand, MSSs are aimed at improving efficiency and effectiveness of organizational responses in order to satisfy the requirements, needs and expectations of the stakeholders. Each organization has its own identity and this is an issue that cannot be neglected; hence, two possible approaches can be attended. First, continue with the implementation of individualized management systems (MSs); or, integrate the several MSSs versus related MSs into an integrated management system (IMS). Therefore, in this context, organizations are faced with a dilemma, as a result of the increasing proliferation and diversity of MSSs. This paper takes into account the knowledge gained through a case study conducted in the context of a Portuguese company and unveils some of the advantages and disadvantages of integration. A methodology is also proposed and presented to support organizations in developing and structuring the integration process of their individualized MSs, and consequently minimize problems that are generators of inefficiencies, value destruction and loss of competitiveness. The obtained results provide relevant information that can support Top Management decision in solving that dilemma and consequently promote a successful integration, including a better control of business risks associated to MSSs requirements and enhancing sustainable performance, considering the context in which organizations operate.

The international harmonization process of public accounting in Portugal: the perspective of different stakeholders

This paper investigates the reform of public accounting in Portugal through the IPSAS adoption highlighting the perception of different stakeholders. Two competing theories (NPM and the institutional theory) are used to understand public accounting changes within the Portuguese context. In general, different stakeholders agree with the favorable moment and the context of the reform. The context of financial crises and the great external pressures to cut public deficits and to improve the quality of financial information seem to be the most important factors to stimulate changes in public accounting. In addition, stakeholders recommend the use of different strategies to ensure success.

A relevância do relatório de auditoria para os investidores institucionais, analistas financeiros e analistas de crédito

In the 70s, a new line of research focused on the study of the influence of the audit report on the decision process of investors, financial analysts and credit analysts. Notwithstanding the numerous studies that have been carried out, results have not been consistent. Given the above, and considering the lack, in Portugal, of a research of this nature, it seems urgent to carry out a study that allows the analysis of the use of the audit report, as well as its influence on the decision making process of Portuguese stakeholders. For that purpose, in the light of the positivist research paradigm, a questionnaire was designed, which was administered by mail and on the Survey Monkey platform to a sample of institutional investors, financial analysts and credit analysts. The statistical analysis of the data obtained was undertaken with resource to the Statistical Package for the Social Sciences and SmartPLS 2.0. Corroborating the literature review and the assumptions of the Agency Theory and the Stakeholder Theory, used in the theoretical framework of analysis, empirical evidence has shown that the audit report influences the decision of institutional investors, financial analysts and credit analysts, and that the opinion expressed in that document is the most determinant factor of this influence. In addition to this factor, it was found that the degree of utilization of the audit report, as well as the value ascribed to this document, determine its influence in the decision process of research groups studied. Only in the case of institutional investors, the results did not reveal a correlation between the utility ascribed to the audit report and the influence of this document in their decision making process. In turn, the statistical inference of the model explaining the degree of use of the audit report revealed that it is conditioned by the perceived quality of the information enclosed in the audit report, the utility assigned to the audit report on the decision process, as well as the relevance of the other sources of information used by stakeholders. Therefore, this study allowed proving the importance of the audit report to its users. As a result, we believe to have filled a gap in national literature and to have contributed to the enhancement of international literature. The importance that this document has for the development of any country is, therefore, shown, and it is urgent to maintain rigor in the selection of its staff, in the development of its standards, and especially in the development of audits. Moreover, we also consider that this research may contribute to the improvement of the audit report, insofar as it will help professional bodies to understand the information needs and perceptions of stakeholders.