Same Performance Changes after Live High-Train Low in Normobaric vs. Hypobaric Hypoxia.

PURPOSE: We investigated the changes in physiological and performance parameters after a Live High-Train Low (LHTL) altitude camp in normobaric (NH) or hypobaric hypoxia (HH) to reproduce the actual training practices of endurance athletes using a crossover-designed study. METHODS: Well-trained triathletes (n = 16) were split into two groups and completed two 18-day LTHL camps during which they trained at 1100-1200 m and lived at 2250 m (P i O2 = 111.9 ± 0.6 vs. 111.6 ± 0.6 mmHg) under NH (hypoxic chamber; FiO2 18.05 ± 0.03%) or HH (real altitude; barometric pressure 580.2 ± 2.9 mmHg) conditions. The subjects completed the NH and HH camps with a 1-year washout period. Measurements and protocol were identical for both phases of the crossover study. Oxygen saturation (S p O2) was constantly recorded nightly. P i O2 and training loads were matched daily. Blood samples and VO2max were measured before (Pre-) and 1 day after (Post-1) LHTL. A 3-km running-test was performed near sea level before and 1, 7, and 21 days after training camps. RESULTS: Total hypoxic exposure was lower for NH than for HH during LHTL (230 vs. 310 h; P < 0.001). Nocturnal S p O2 was higher in NH than in HH (92.4 ± 1.2 vs. 91.3 ± 1.0%, P < 0.001). VO2max increased to the same extent for NH and HH (4.9 ± 5.6 vs. 3.2 ± 5.1%). No difference was found in hematological parameters. The 3-km run time was significantly faster in both conditions 21 days after LHTL (4.5 ± 5.0 vs. 6.2 ± 6.4% for NH and HH), and no difference between conditions was found at any time. CONCLUSION: Increases in VO2max and performance enhancement were similar between NH and HH conditions.

Para além das fronteiras da química: relações entre filosofia, psicologia e ensino de química

The concepts of molecule and of molecular structure are so central to understand chemical phenomena that seems to be no doubt about the uniqueness of its meanings. Nevertheless, the idea that the world exhibits a multiform structure and that to different spheres of the world correspond different ways of knowing (Berger & Luckmann, 1967) has received support from different areas of scientific inquiry. Bachelard (1940, 1982) showed that a single philosophical doctrine is not enough to describe all the different ways of thinking when we try to explain a single concept. Wooley's question about the possibility of deducing the concept of molecular structure from quantum theory (Wooley, 1978) strengthened the feasibility of thinking the concept of molecule as a profile that encompasses different meanings. Moreover, research on students' learning of scientific concepts have brought to light that students use several ideas to explain scientific and everyday phenomena which are different from those learned in formal schooling. These ideas are not extinguished or replaced by scientific concepts, despite the efforts to do so in science classes. The common sense and scientific ways of understanding and talking about reality seems to be complementary in the same sense of the Bohr's complementarity (Halliday & Martin, 1993). So, we have to include in our profile of the concept of molecule not only scientific but also common sense zones. Drawing from Bachelard's notion of epistemological profile, from the history of science and from the research on children's ideas in science, we have developed the idea of a conceptual profile and used it to analyse basic scientific concepts, such as the concepts of matter and physical states of matter (Mortimer, 1995) and to investigate new ways to teach them. In the present paper, we will discuss the zones that might constitute a conceptual profile of molecule. The need of complementary views to account for the molecular structure in different contexts bring important issues for understanding and teaching chemistry, which will be discussed further in the article.

Vaatimustiedon hallinta rakennusteollisuuden tuotanto- ja suunnitteluyrityksessä

Diplomityön ensisijaisena tavoitteena on luoda yleinen vaatimustiedon hallinnan malli, jonka avulla yrityksen toimintaympäristössä vaikuttavat vaatimukset voidaan tunnistaa ja kommunikoida koko organisaation tietoisuuteen. Kohdeyrityksen näkökulmasta mielenkiinto kohdistuu erityisesti käytännön työn kautta saataviin lopputuloksiin. Tavoitteena on luoda yritykseen pohja vaatimustiedon hallinnalle sekä samalla kehittää sähköistä vaatimustietojärjestelmää. Diplomityö on toteutettu konstruktiivisena tutkimuksena. Tutkittavasta aiheesta on saatavilla teoriatietoa hyvin rajallisesti. Tämän vuoksi vaatimustiedon hallinnan malli toteutetaan vahvasti käytännön työn havaintojen ja analysoinnin pohjalta. Lähtökohdaksi käytännön työlle esitellään laadunhallinnan, tiedonhallinnan sekä prosessien näkökulmia sekä perinteisiä vaatimusten hallinnan teorioita. Tiedot, joiden avulla valmis malli on luotu, kerättiin haastattelemalla yrityksen prosessien omistajia. Työn tuloksina esitellään vaatimustiedon hallinnan malli sekä yrityksessä saatuja käytännön työn lopputuloksia. Vaatimustiedon hallinnalla tarkoitetaan yrityksen toimintaympäristössä, prosesseissa sekä tuotteissa vaikuttavien vaatimusten saattamista organisaation tietoisuuteen mahdollisimman käyttäjäystävällisellä tavalla. Mallissa esiintyvät vaatimukset ovat sidosryhmien tai yrityksen itsensä ilmaisuja liittyen tuotteen tai palvelun ominaisuuksiin sekä suorituskykyyn. Valmis malli voidaan jakaa neljään eri vaiheeseen, jotka ovat suunnittelu ja esitutkimus, toteutus, käyttöönotto, sekä muutostenhallinta ja ylläpito. Laajimmillaan toteutettuna vaatimustiedon hallinta auttaa yritystä parhaiden käytäntöjen tunnistamisessa ja prosessien kehittämisessä, mahdollistaa tasalaatuisen toiminnan ja tuotteet sekä toimivan tiedon ja osaamisen hallinnan.

Potencialidades do dióxido de chumbo eletrodepositado como sensor potenciométrico

This paper proposes an experiment to be performed in both instrumental analysis and experimental physical-chemistry curricular disciplines in order to open options to develop challenging basic research activities. Thus the experimental procedures and the results obtained in the preparation of electrodeposited lead dioxide onto graphite and its evaluation as potentiometric sensor for H3O+ and Pb2+ ions, are presented. The data obtained in acid-base titrations were compared with those of the traditional combination glass electrode at the same conditions. Although a linear sub-Nernstian response to free hydrogen ions was observed for the electrodeposited PbO2 electrode, a good agreement was obtained between them. Working as lead(II) sensing electrode, the PbO2 showed a linear sub-Nernstian behavior at total Pb2+ concentrations ranging from 3,5 x 10-4 to 3,0 x 10-2 mol/L in nitrate media. For the redox couple PbO2/Pb(II) the operational slope converges to the theoretical one, as the acidity of the working solution increases.

Ozonólise das ligninas organossolve e kraft eucalipto. Parte II: cinética nos meios ácido e básico

Organosolv and kraft lignins were treated with ozone both in basic and acid media and the reaction was studied kinetically. In contrast to reported studies, ozone was more efective in basic medium. Kraft lignin was degraded faster than organosolv lignin in both media but in the basic medium the rate of reaction was very much faster than in the acid one: for kraft lignin, the observed degradation was 93% for 2 min of reaction in the basic medium and 56% for 10 min of reaction in the acid medium; for organosolv lignin, 47% and 25%, respectively, in the same times. Higher phenolic hydroxyl groups contents increase the reaction rate.

Tilintarkastajan kurinpidollinen vastuu; TILA:n lausunnot 1990-2006

Tutkielman tavoitteena on selvittää kuinka tilintarkastajista tilintarkastuslautakunnalle tehdyt kantelut ovat muuttuneet vuosien 1990–2000 ja 2001–2006 aikana. Tutkimuksen tarkoituksena on tarkastella ovatko kansainvälistymisen aiheuttamat muutokset tilintarkastusta säätelevissä laeissa johtaneet kanteluiden määrälliseen tai laadulliseen muutokseen. Teoreettinen osa tarkastelee tilintarkastusta lainsäädännöllisesti sekä TILA:n tehtäviä tilintarkastusta valvovana elimenä. Empiirinen osa tutkii TILA:lle tehtyjen kanteluiden ratkaisuselosteita vuosien 1990–2000 ja 2001–2006 välillä. Kanteluita tutkitaan sekä määrällisesti että laadullisesti. Tulokset osoittavat että kanteluiden määrässä on tapahtunut muutos; vuosina 2001–2006 kanteluiden määrä on selvästi laskenut. Kanteluiden laadussa, kun sillä käsitetään kanteluiden syy sekä epäilyksen alainen toiminta, ei ole tapahtunut muutosta mutta sanktioiden jakaantumisessa eri toiminnan mukaan puolestaan on tapahtunut muutosta.

Varasto- ja hankintamodulin kehittäminen toiminnanohjausjärjestelmään

Tässä diplomityössä tarkoituksena on kerätä yhteen toiminnanohjausjärjestelmän varasto- ja hankintamodulin kehittämisessä tarvittavaa teoriatietoa, sekä Nestix Oy:n asiakkaiden ja joidenkin muiden yritysten tarpeita kyseiselle ohjelmistolle. Teoria ja tarpeet yhdistetään karkeaksi ohjelmiston tarvemäärittelyksi, jonka perusteella Nestix Oy toteuttaa uudet modulit toiminnanohjausjärjestelmäänsä. Tutkimuksissa havaittiin, että yrityksillä on hyvin samankaltaisia tarpeita varastojen ja hankintojen hallintaan. Varastoinnin ja hankinnan prosessit poikkeavat hyvin vähän yritysten välillä. Samoja perinteisiä logistiikan perustyökaluja käytetään miltei kaikissa yrityksissä. Tulevaisuuden houkuttelevimpana kehitysalueena voidaan pitää ohjelmistojen internet-pohjaisuutta, joka mahdollistaa ohjelmiston käyttämisen mistäpäin maailmaa tahansa ilman erillisiä ohjelmistoasennuksia. Tutkimuksen jälkeen Nestix-ohjelmistoperheeseen toteutettiin integroidut hankinnan sekä varastoinnin modulit. Ohjelmaa on kehitetty tutkimuksen tekemisen jälkeen eteenpäin ja sitä on myyty useaan Euroopan maahan osana Nestix toiminnanohjausjärjestelmää.

A transformada de Fourier em basic

In this paper we describe three computer programs in Basic language about the Fourier transform (FFT) which are available in the Internet site http://artemis.ffclrp.usp.br/SoftwareE.htm (in English) or http://artemis.ffclrp.usp.br/softwareP.htm (in Portuguese) since October 1998. Those are addresses to the Web Page of our Laboratory of Organic Synthesis. The programs can be downloaded and used by anyone who is interested on the subject. The texts, menus and captions in the programs are written in English.

Knapsack sets for cryptography

The basic goal of this study is to extend old and propose new ways to generate knapsack sets suitable for use in public key cryptography. The knapsack problem and its cryptographic use are reviewed in the introductory chapter. Terminology is based on common cryptographic vocabulary. For example, solving the knapsack problem (which is here a subset sum problem) is termed decipherment. Chapter 1 also reviews the most famous knapsack cryptosystem, the Merkle Hellman system. It is based on a superincreasing knapsack and uses modular multiplication as a trapdoor transformation. The insecurity caused by these two properties exemplifies the two general categories of attacks against knapsack systems. These categories provide the motivation for Chapters 2 and 4. Chapter 2 discusses the density of a knapsack and the dangers of having a low density. Chapter 3 interrupts for a while the more abstract treatment by showing examples of small injective knapsacks and extrapolating conjectures on some characteristics of knapsacks of larger size, especially their density and number. The most common trapdoor technique, modular multiplication, is likely to cause insecurity, but as argued in Chapter 4, it is difficult to find any other simple trapdoor techniques. This discussion also provides a basis for the introduction of various categories of non injectivity in Chapter 5. Besides general ideas of non injectivity of knapsack systems, Chapter 5 introduces and evaluates several ways to construct such systems, most notably the "exceptional blocks" in superincreasing knapsacks and the usage of "too small" a modulus in the modular multiplication as a trapdoor technique. The author believes that non injectivity is the most promising direction for development of knapsack cryptosystema. Chapter 6 modifies two well known knapsack schemes, the Merkle Hellman multiplicative trapdoor knapsack and the Graham Shamir knapsack. The main interest is in aspects other than non injectivity, although that is also exploited. In the end of the chapter, constructions proposed by Desmedt et. al. are presented to serve as a comparison for the developments of the subsequent three chapters. Chapter 7 provides a general framework for the iterative construction of injective knapsacks from smaller knapsacks, together with a simple example, the "three elements" system. In Chapters 8 and 9 the general framework is put into practice in two different ways. Modularly injective small knapsacks are used in Chapter 9 to construct a large knapsack, which is called the congruential knapsack. The addends of a subset sum can be found by decrementing the sum iteratively by using each of the small knapsacks and their moduli in turn. The construction is also generalized to the non injective case, which can lead to especially good results in the density, without complicating the deciphering process too much. Chapter 9 presents three related ways to realize the general framework of Chapter 7. The main idea is to join iteratively small knapsacks, each element of which would satisfy the superincreasing condition. As a whole, none of these systems need become superincreasing, though the development of density is not better than that. The new knapsack systems are injective but they can be deciphered with the same searching method as the non injective knapsacks with the "exceptional blocks" in Chapter 5. The final Chapter 10 first reviews the Chor Rivest knapsack system, which has withstood all cryptanalytic attacks. A couple of modifications to the use of this system are presented in order to further increase the security or make the construction easier. The latter goal is attempted by reducing the size of the Chor Rivest knapsack embedded in the modified system. '

Amyloid Beta Precursor Protein: Proper Credit for the Basic Biochemical Properties of the Most Studied Protein in the 21st Century

The amyloid precursor protein (APP) is mainly known for being the precursor of the ß-amyloid peptide, which accumulates in plaques found in the brain of Alzheimer's disease patients. Expression in different tissues and the degree of sequence identity among mammals indicate an essential and non-tissue specific physiological function. APP is anchored to the membrane and displays a single C-terminal intracellular domain and a longer N-terminal extracellular domain. The basic biochemical properties and the scattered data on research, not related to production of beta-amyloid peptide, suggest that the protein and the molecules resulting from APP proteolytic cleavage may act as adhesion factors, enzymes, hormones/neurotransmitters and/or protease inhibitors. APP deserves to be known for its quite notable properties and its physiological role(s).

Entrenamiento de la fuerza orientado a la mejora de la velocidad de golpeo en tenis

El golpeo de la bola a velocidades elevadas, es un factor determinante para el rendimiento en el tenis moderno. Durante los últimos 20 años se ha producido una gran evolución del juego y los cambios en el juego moderno se han traducido en el uso de poderosos servicios y golpes de fondo. Aunque la fuerza es una capacidad determinante desde la perspectiva de la condición física, ha habido poca investigación para fundamentar la eficacia de los programas de entrenamiento de fuerza para los jugadores de tenis. El objetivo de este estudio es realizar una revisión sobre los criterios básicos para dirigir correctamente el entrenamiento de la fuerza orientado a la mejora de la de la velocidad de golpeo de la pelota. Aunque las necesidades de fuerza dinámica máxima (FDM) en los golpeos son bajas, la literatura científica parece apuntar que unos adecuados niveles de FDM ejercen efectos positivos sobre el aumento de velocidad de golpeo en el tenis. La mejora y mantenimiento de esta manifestación de fuerza se busca a expensas de factores neurales. Los entrenamientos de fuerza útil deben utilizar medios que permitan ejecutar el gesto técnico, implicar las mismas cadenas musculares, rango de movimiento o velocidades de ejecución. En este sentido, se han propuesto la utilización de pelotas medicinales, mancuernas de peso ligero, gomas elásticas, máquinas multifuncionales de resistencia neumática o poleas.

Ex-Dividend Day Returns when Dividend and Capital Gains are Taxed at the Same Rate

Due to the overwhelming international evidence that stock prices drop by less than the dividend paid on ex-dividend days, the ex-dividend day anomaly is considered a stylized fact. Two main approaches have emerged to explain this empirical regularity: the tax-clientele hypothesis and the microstructure of financial markets. Although the most widely accepted explanation for this fact relies on taxes, the ex-dividend day anomaly has been reported even in countries where neither dividends nor capital gains are taxed. The 2006 tax reform in Spain established the same tax rate for dividends and capital gains. This paper investigates stock returns on ex-dividend days in the Spanish stock market after the 2006 tax reform using a random coefficient model. Contrary to previous research, we do not observe an ex-dividend day anomaly. Unlike previous investigations, which are mostly concerned with suggesting explanations as to why this anomaly has occurred, we are in the somewhat strange position of discussing why this anomaly has not occurred. Our findings are robust across companies and stock dividend yields, thus supporting a tax--based explanation for the ex-dividend day anomaly.

A graduação em química: um novo químico para uma nova era

The discussions sponsored by the Brazilian Chemical Society, over the past five years, intending to produce a chemistry agenda with perspectives and needs for the next decade for the country, have involved the national chemistry community and several related sectors of Brazilian society. Chemistry education has been the theme throughout these discussions. It is known that the low level of basic and secondary education and the recent increase in high school courses and institutions adversely affect the quality of undergraduate teaching. The recent national "Curriculum Guidelines" for Chemistry Courses, through their flexible approach, encourage the integral, interdisciplinary (non compartmentalized) and critical-reflexive training of professionals as citizens and as entrepreneurs. However, deficiencies are still recognized. The system of undergraduate course evaluation has identified the most fragile modalities of the courses and other indicators. Also, it has been verified that the Brazilian chemistry industry absorbs only minimally the highly qualified professionals, which is attributed to the fact that the Federal Council of Chemistry is vertically organized and does not recognize the graduate degrees as professional qualifications. In conclusion, the importance of the effective implantation of the national curriculum guidelines is apparent, among other aspects, highlighting courses whose didactical and pedagogical projects may offer a solid formation in Chemistry. However, at the same time the guidelines are comprehensive and general enough to enable the chemistry professionals to develop varied skills.

Size Effect and Notch Size Effect in Metal Fatigue

It is a well known phenomenon that the constant amplitude fatigue limit of a large component is lower than the fatigue limit of a small specimen made of the same material. In notched components the opposite occurs: the fatigue limit defined as the maximum stress at the notch is higher than that achieved with smooth specimens. These two effects have been taken into account in most design handbooks with the help of experimental formulas or design curves. The basic idea of this study is that the size effect can mainly be explained by the statistical size effect. A component subjected to an alternating load can be assumed to form a sample of initiated cracks at the end of the crack initiation phase. The size of the sample depends on the size of the specimen in question. The main objective of this study is to develop a statistical model for the estimation of this kind of size effect. It was shown that the size of a sample of initiated cracks shall be based on the stressed surface area of the specimen. In case of varying stress distribution, an effective stress area must be calculated. It is based on the decreasing probability of equally sized initiated cracks at lower stress level. If the distribution function of the parent population of cracks is known, the distribution of the maximum crack size in a sample can be defined. This makes it possible to calculate an estimate of the largest expected crack in any sample size. The estimate of the fatigue limit can now be calculated with the help of the linear elastic fracture mechanics. In notched components another source of size effect has to be taken into account. If we think about two specimens which have similar shape, but the size is different, it can be seen that the stress gradient in the smaller specimen is steeper. If there is an initiated crack in both of them, the stress intensity factor at the crack in the larger specimen is higher. The second goal of this thesis is to create a calculation method for this factor which is called the geometric size effect. The proposed method for the calculation of the geometric size effect is also based on the use of the linear elastic fracture mechanics. It is possible to calculate an accurate value of the stress intensity factor in a non linear stress field using weight functions. The calculated stress intensity factor values at the initiated crack can be compared to the corresponding stress intensity factor due to constant stress. The notch size effect is calculated as the ratio of these stress intensity factors. The presented methods were tested against experimental results taken from three German doctoral works. Two candidates for the parent population of initiated cracks were found: the Weibull distribution and the log normal distribution. Both of them can be used successfully for the prediction of the statistical size effect for smooth specimens. In case of notched components the geometric size effect due to the stress gradient shall be combined with the statistical size effect. The proposed method gives good results as long as the notch in question is blunt enough. For very sharp notches, stress concentration factor about 5 or higher, the method does not give sufficient results. It was shown that the plastic portion of the strain becomes quite high at the root of this kind of notches. The use of the linear elastic fracture mechanics becomes therefore questionable.

Salient Pole Synchronous Machine Modelling in an Industrial Direct Torque Controlled Drive Application

Synchronous motors are used mainly in large drives, for example in ship propulsion systems and in steel factories' rolling mills because of their high efficiency, high overload capacity and good performance in the field weakening range. This, however, requires an extremely good torque control system. A fast torque response and a torque accuracy are basic requirements for such a drive. For large power, high dynamic performance drives the commonly known principle of field oriented vector control has been used solely hitherto, but nowadays it is not the only way to implement such a drive. A new control method Direct Torque Control (DTC) has also emerged. The performance of such a high quality torque control as DTC in dynamically demanding industrial applications is mainly based on the accurate estimate of the various flux linkages' space vectors. Nowadays industrial motor control systems are real time applications with restricted calculation capacity. At the same time the control system requires a simple, fast calculable and reasonably accurate motor model. In this work a method to handle these problems in a Direct Torque Controlled (DTC) salient pole synchronous motor drive is proposed. A motor model which combines the induction law based "voltage model" and motor inductance parameters based "current model" is presented. The voltage model operates as a main model and is calculated at a very fast sampling rate (for example 40 kHz). The stator flux linkage calculated via integration from the stator voltages is corrected using the stator flux linkage computed from the current model. The current model acts as a supervisor that prevents only the motor stator flux linkage from drifting erroneous during longer time intervals. At very low speeds the role of the current model is emphasised but, nevertheless, the voltage model always stays the main model. At higher speeds the function of the current model correction is to act as a stabiliser of the control system. The current model contains a set of inductance parameters which must be known. The validation of the current model in steady state is not self evident. It depends on the accuracy of the saturated value of the inductances. Parameter measurement of the motor model where the supply inverter is used as a measurement signal generator is presented. This so called identification run can be performed prior to delivery or during drive commissioning. A derivation method for the inductance models used for the representation of the saturation effects is proposed. The performance of the electrically excited synchronous motor supplied with the DTC inverter is proven with experimental results. It is shown that it is possible to obtain a good static accuracy of the DTC's torque controller for an electrically excited synchronous motor. The dynamic response is fast and a new operation point is achieved without oscillation. The operation is stable throughout the speed range. The modelling of the magnetising inductance saturation is essential and cross saturation has to be considered as well. The effect of cross saturation is very significant. A DTC inverter can be used as a measuring equipment and the parameters needed for the motor model can be defined by the inverter itself. The main advantage is that the parameters defined are measured in similar magnetic operation conditions and no disagreement between the parameters will exist. The inductance models generated are adequate to meet the requirements of dynamically demanding drives.