Security issues for future intelligent transport systems

Cooperative Intelligent Transportation Systems (C-ITS) allow in-vehicle systems, and ultimately the driver, to enhance their awareness of their surroundings by enabling communication between vehicles and road infrastructure. C-ITS are widely considered as the next major step in driving assistance systems, aiming at increasing safety, comfort and mobility for drivers. However, any communicating systems are subjected to security threats. A key component for providing secure communications at a large scale is a Public Key Infrastructure (PKI). Due to the safety-critical nature of Vehicle-to-Vehicle (V2V) communications, a C-ITS PKI has functional, performance and scalability requirements that differ from traditional non-automotive environments. This paper identifies and defines the key functional and security requirements for C-ITS PKI systems and analyses proposed C-ITS PKI standards against these requirements. In particular, the proposed US and European C-ITS PKI systems are identified as being too complex and not scalable. The paper also highlights various privacy, security and scalability concerns that should be considered for a secure C-ITS PKI solution in the Australian transport landscape.

How serious are they? The use of data linkage to explore different definitions of serious road crash injuries

Over recent years, the focus in road safety has shifted towards a greater understanding of road crash serious injuries in addition to fatalities. Police reported crash data are often the primary source of crash information; however, the definition of serious injury within these data is not consistent across jurisdictions and may not be accurately operationalised. This study examined the linkage of police-reported road crash data with hospital data to explore the potential for linked data to enhance the quantification of serious injury. Data from the Queensland Road Crash Database (QRCD), the Queensland Hospital Admitted Patients Data Collection (QHAPDC), Emergency Department Information System (EDIS), and the Queensland Injury Surveillance Unit (QISU) for the year 2009 were linked. Nine different estimates of serious road crash injury were produced. Results showed that there was a large amount of variation in the estimates of the number and profile of serious road crash injuries depending on the definition or measure used. The results also showed that as the definition of serious injury becomes more precise the vulnerable road users become more prominent. These results have major implications in terms of how serious injuries are identified for reporting purposes. Depending on the definitions used, the calculation of cost and understanding of the impact of serious injuries would vary greatly. This study has shown how data linkage can be used to investigate issues of data quality. It has also demonstrated the potential improvements to the understanding of the road safety problem, particularly serious injury, by conducting data linkage.

Use of physicochemical signatures to assess the sources of metals in urban road dust

Road deposited dust is a complex mixture of pollutants derived from a wide range of sources. Accurate identification of these sources is seminal for effective source-oriented control measures. A range of techniques such as enrichment factor analysis (EF), principal component analysis (PCA) and hierarchical cluster analysis (HCA) are available for identifying sources of complex mixtures. However, they have multiple deficiencies when applied individually. This study presents an approach for the effective utilisation of EF, PCA and HCA for source identification, so that their specific deficiencies on an individual basis are eliminated. EF analysis confirmed the non-soil origin of metals such as Na, Cu, Cd, Zn, Sn, K, Ca, Sb, Ba, Ti, Ni and Mo providing guidance in the identification of anthropogenic sources. PCA and HCA identified four sources, with soil and asphalt wear in combination being the most prominent sources. Other sources were tyre wear, brake wear and sea salt.

Observations of road safety behaviours and practices of motorcycle rickshaw drivers in Lahore, Pakistan

Motorcycle Rickshaws (MRs) are an informal paratransit mode in Pakistan. They are locally manufactured and very popular but there are concerns about their crash involvement and overall safety. The first study of the current PhD program revealed that rickshaws (both MRs and auto-rickshaws) were involved in 51,992 road crashes attended by emergency ambulances in Punjab province, Pakistan between 2011-2013. This study aims to examine the road safety behaviours and practices of Motorcycle Rickshaw Drivers (MRDs) that may be contributing to these crashes. MRDs were observed at 12 major signalised intersections in Lahore. Vehicle characteristics and driver behaviours were recorded using a paper-based survey between 9am-7pm for a full week in May 2015. Of the 500 MRDs observed, about 23.4% appeared to be younger than the minimum driver licensing age of 18 years. More than half (52.6%) of the MRDs entered on the red light and 17.4% crossed when the signal was turning from yellow to green or red. MR traffic conflicts were observed in 62.8% of cases and one crash and 15 near-miss crashes were witnessed. Additionally, about half of MRs were overloaded, no MRD wore a helmet, and 3.8% were using a mobile phone while driving. This study provides the first scientific evidence to substantiate public concerns regarding the safety of MRs. It demonstrates that about a quarter of MRDs are underage,almost half of MRs are overloaded and more than half disobey traffic signals. This research could inform authorities to manage MR related transport and road safety issues.

Influence of road traffic environment and mobile phone distraction on the speed selection behaviour of young drivers

Travel speed is one of the most critical parameters for road safety; the evidence suggests that increased vehicle speed is associated with higher crash risk and injury severity. Both naturalistic and simulator studies have reported that drivers distracted by a mobile phone select a lower driving speed. Speed decrements have been argued to be a risk compensatory behaviour of distracted drivers. Nonetheless, the extent and circumstances of the speed change among distracted drivers are still not known very well. As such, the primary objective of this study was to investigate patterns of speed variation in relation to contextual factors and distraction. Using the CARRS-Q high-fidelity Advanced Driving Simulator, the speed selection behaviour of 32 drivers aged 18-26 years was examined in two phone conditions: baseline (no phone conversation) and handheld phone operation. The simulator driving route contained five different types of road traffic complexities, including one road section with a horizontal S curve, one horizontal S curve with adjacent traffic, one straight segment of suburban road without traffic, one straight segment of suburban road with traffic interactions, and one road segment in a city environment. Speed deviations from the posted speed limit were analysed using Ward’s Hierarchical Clustering method to identify the effects of road traffic environment and cognitive distraction. The speed deviations along curved road sections formed two different clusters for the two phone conditions, implying that distracted drivers adopt a different strategy for selecting driving speed in a complex driving situation. In particular, distracted drivers selected a lower speed while driving along a horizontal curve. The speed deviation along the city road segment and other straight road segments grouped into a different cluster, and the deviations were not significantly different across phone conditions, suggesting a negligible effect of distraction on speed selection along these road sections. Future research should focus on developing a risk compensation model to explain the relationship between road traffic complexity and distraction.

Predicting occupant risk indicators for frontal impacts with redirective crash cushions

Crash cushions are devices deployed on the road network in order to shield fixed roadside hazards and the non-crashworthy ends of road safety barriers. However crash cushions vary in terms of configuration and operation, meaning that different devices may also vary in terms of ability to mitigate occupant risk. In this study, data derived from crash testing of eleven redirective crash cushions is used as the base input to a numerical procedure for calculation of occupant risk indicators Occupant Impact Velocity (OIV), Occupant Ridedown Acceleration (ORA) and longitudinal Acceleration Severity Index (ASI) for a range of simulated impacting vehicles (mass 800 kg to 2,500 kg) impacting each crash cushion at a range of impact speeds (18 m/s to 32 m/s). The results may be interpreted as demonstrating firstly that enhanced knowledge of the performance of a device over a range of impact conditions, i.e., beyond the crash testing, may assist in determining the crash cushion most suited to a particular application; secondly that a more appropriate conformance test for occupant risk would be a frontal impact by a small (light) vehicle travelling parallel to and aligned with the centreline of the crash cushion; and thirdly that current documented numerical procedures for calculating occupant risk indicators may require review.

The National Road Safety Partnership Program providing a pathway for any business/organisation to create a positive road safety culture

The National Road Safety Partnership Program (NRSPP) is an industry-led collaborative network which aims to support Australian businesses in developing a positive road safety culture. It aims to help businesses to protect their employees and the public, not only during work hours, but also when their staff are ‘off-duty’. How do we engage and help an organisation minimise work-related vehicle crashes and their consequences both internally, and within the broader community? The first step is helping an organisation to understand the true cost of its road incidents. Larger organisations often wear the costs without knowing the true impact to their bottom line. All they perceive is the change in insurance or vehicle repairs. Understanding the true cost should help mobilise a business’s leadership to do more. The next step is ensuring the business undertakes an informed, structured, evidence-based pathway which will guide them around the costly pitfalls. A pathway based around the safe system approach with buy-in at the top which brings the workforce along. The final step, benchmarking, allows the organisation to measure and track its change. This symposium will explore the pathway steps for organisations using NRSPP resources to become engaged in road safety. The 'Total Cost of Risk' calculator has been developed by Zurich, tested in Europe by Nestle and modified by NRSPP for Australia. This provides the first crucial step. The next step is a structured approach through the Workplace Road Safety Guide using experts and industry to discuss the preferred safe system approach which can then link into the national Benchmarking Project. The outputs from the symposium can help frame a pathway for organisations to follow through the NRSPP website.

ASEAN and ADB implementing new approaches to building road safety capacity

Following the Association of Southeast Asian Nations (ASEAN) senior transport officials meeting in May 2011, the Secretariat requested the Asian Development Bank (ADB) to provide assistance to improve road safety in ASEAN. In response, ADB, funded by the Japan Fund for Poverty Reduction, has begun an innovative approach to capacity building that has already been adapted and replicated in other sub-regions. This paper will discuss the model central to the project. The Road Safety Capacity Building for ASEAN Project commenced in May 2013. Each country has appointed a National Focal Point (NFP) to identify and coordinate information. A team of International Experts were appointed to develop materials and present a comprehensive train the trainer program focused on five key areas. Thirty eight senior Government officers from across ASEAN attended a two week program at ADB headquarters in Manila and will arrange and deliver specific training and associated activities to other colleagues within their country. ADB has appointed a National Consultant to work in partnership with the trainees on a range of activities including development of “pipeline project proposals” for funding consideration investors and donors. As part of the project, a draft ASEAN Regional Road Safety Strategy document has been prepared and consultation will further refine its directions and contents. The project will reach its conclusion in 2015 and a follow up phase three project is being considered.

Strengthening local road safety capacity in Cambodia

Road crashes and injuries have become a growing issue worldwide. In 2011, more than 75,000 people died in road crashes in the ten member countries of the Association of South East Asian Nations (ASEAN) and many times this number sustained long term injuries. In 2014, the Asian Development Bank (ADB), funded by the Japan Fund for Poverty Reduction, commenced a package of actions to improve road safety in ASEAN. In 2015, as part of the technical assistance for this project, a Road Safety Advisor was appointed for Cambodia for four months. The assignment produced several primary outputs, which included the organization of national training on traffic law enforcement and road safety management, the conduct of a training needs survey and cost analysis study, and the development of a proposal for strengthening speed management. It is important to note that unlike other ADB technical assistance projects, this assignment adopted a capacity building approach, which promoted and encouraged the local road safety team in the government to step up and take action. The research capacity building approach adopted in this project highlighted the feasibility of increasing participation from existing stakeholders, especially the government in identifying existing human resources, building the capacity of relevant government officials and supporting them to take the ownership of the project. It is hoped that similar outcomes will occur in the other ASEAN countries.

Serendipitous road trips: Enhancing tourists’ experiences through social interaction

Driving can be a lonely activity. While there has been a lot of research and technical inventions concerning car-to-car communication and passenger entertainment, there is still little work concerning connecting drivers. Whereas tourism is very much a social activity, drive tourists have few options to communicate with fellow travellers. The proposed project is placed at the intersection of tourism and driving and aims to enhance the trip experience during driving through social interaction. This thesis explores how a mobile application that allows instant messaging between travellers sharing similar context can add to road trip experiences. To inform the design of such an application, the project adopted the principle of the user-centred design process. User needs were assessed by running an ideation workshop and a field trip. Findings of both studies have shown that tourists have different preferences and diverse attitudes towards contacting new people. Yet all participants stressed the value of social recommendations. Based on those results and a later expert review, three prototype versions of the system were created. A prototyping session with potential end users highlighted the most important features including the possibility to view user profiles, choose between text and audio input and receive up-to-date information. An implemented version of the prototype was evaluated in an exploratory study to identify usability related problems in an actual use case scenario as well as to find implementation bugs. The outcomes of this research are relevant for the design of future mobile tourist guides that leverage from benefits of social recommendations.

To Petra via Jabal Haroun : Nabataean-Roman road remains in the Finnish Jabal Haroun Project survey area

Työ käsittelee Finnish Jabal Haroun Project -tutkimusryhmän Etelä-Jordaniasta inventoimalla keräämää arkeologista aineistoa (vuosilta 1999-2005) tietutkimuksen kannalta. Työn tarkoituksena on selvittää, miksi tutkimusalueella, Aaronin vuoren ympäristössä, sijaitsee tien jäänteitä ja miten tie on maastossa muinoin kulkenut. Lisäksi työ analysoi tien varsilla havaittujen rakennusten jäännösten suhdetta tiehen ja pyrkii ajoittamaan tien käyttöajankohdan (ajankohdat). Työn alkuoletuksena on, että pääosa tienvarsirakennuksista on liitettävissä tiehen ja tien sijoittuminen tutkimusalueelle johtuu pitkälti lähistöllä sijaitsevan Petran noususta merkittäväksi, Nabatealaisten harjoittaman kaupan keskukseksi, Lähi-idässä ajanlaskun alkuun mennessä. Tien jäänteitä tarkastellaan maisema-arkeologisin perustein. Tämä tarkoittaa sitä, että analyysissä korostuvat sekä kulttuuriset että ympäristölliset vaikuttimet. Niiden välistä, aikaan sidottua, suhdetta arvioidaan menneen ihmistoiminnan selittämiseksi. Tutkimusmenetelmät ovat paikkatietojärjestelmien soveltaminen, kohdekohtainen arkeologisen aineiston ja sijainnin tutkiminen, vertailevan aineiston käyttö sekä kolmiulotteinen tarkastelu. Tie ajoitetaan tienvarsikohteiden keramiikkalöytöjen avulla sekä rakenneanalyysin perusteella. Tutkimus osoittaa tien syntyneen alueen sijainnin takia. Sijainti oli edullinen suhteessa luonnonvaroihin, asutuskeskuksiin ja luontaisiin kulkuväyliin. Tien rakentajat osasivat taidokkaasti hyödyntää alueen luonnonpiirteitä ja käyttivät erityisiä menetelmiä vaikeiden tieosuuksien turvaamiseksi luonnonvoimien tuhoilta. Suurin osa tienvarsirakenteista voidaan katsoa johtuvan suoraan tien olemassaolosta, pieni osa rakenteista palveli pääsääntöisesti muita maankäytön muotoja. Petran vaikutus tien olemassaoloon ja muotoon oli suuri, kaupungin kehitys ja kukoistus näkyvät tiehen liitettävässä arkeologisessa aineistossa. Tien aktiivinen käyttö näyttää jatkuneen myös Roomalaisaikaan ensimmäisille vuosisadoille jKr., jonka jälkeen se hitaasti hiipui.

Multi-Hypotheses Tracking using the Dempster–Shafer Theory, application to ambiguous road context

This paper presents a Multi-Hypotheses Tracking (MHT) approach that allows solving ambiguities that arise with previous methods of associating targets and tracks within a highly volatile vehicular environment. The previous approach based on the Dempster–Shafer Theory assumes that associations between tracks and targets are unique; this was shown to allow the formation of ghost tracks when there was too much ambiguity or conflict for the system to take a meaningful decision. The MHT algorithm described in this paper removes this uniqueness condition, allowing the system to include ambiguity and even to prevent making any decision if available data are poor. We provide a general introduction to the Dempster–Shafer Theory and present the previously used approach. Then, we explain our MHT mechanism and provide evidence of its increased performance in reducing the amount of ghost tracks and false positive processed by the tracking system.

An imagery-based road map to tackle maladaptive motivation in clinical disorders

There is now a widespread recognition of the importance of mental imagery in a range of clinical disorders (1). This provides the potential for a transdiagnostic route to integrate some aspects of these disorders and their treatment within a common framework. This opinion piece argues that we need to understand why imagery is such a central and recurring feature, if we are to progress theories of the origin and maintenance of disorders. This will aid us in identifying therapeutic techniques that are not simply targeting imagery as a symptom, but as a manifestation of an underlying problem. As papers in this issue highlight, imagery is a central feature across many clinical disorders, but has been ascribed varying roles. For example, the involuntary occurrence of traumatic memories is a diagnostic criterion for PTSD (2), and it has been suggested that multisensory imagery of traumatic events normally serves a functional role in allowing the individual to reappraise the situation (3), but that this re-appraisal is disabled by extreme affective responses. In contrast to the disabling flashbacks associated with PTSD, depressed adults who experience suicidal ideation often report “flash forward” imagery related to suicidal acts (4), motivating them to self-harm. Socially anxious individuals who engage in visual imagery about giving a talk in public become more anxious and make more negative predictions about future performance than others who engage in more abstract, semantic processing of the past event (5). People with Obsessive Compulsive Disorder (OCD) frequently report imagery of past adverse events, and imagery seems to be associated with severity (6). The content of intrusive imagery has been related to psychotic symptoms (7), including visual images of the catastrophic fears associated with paranoia and persecution. Imagery has been argued (8) to play a role in the maintenance of psychosis through negative appraisals of imagined voices, misattribution of sensations to external sources, by the induction of negative mood states that trigger voices, and through maintenance of negative schemas. In addiction and substance dependence, Elaborated Intrusion (EI) Theory (9, 10) emphasizes the causal role that imagery plays in substance use, through its role in motivating an individual to pursue goals directed toward achieving the pleasurable outcomes associated with substance use...

A multi-hierarchical strategy for on-ramp coordination

Ramp metering (RM) is an access control for motorways, in which a traffic signal is placed at on-ramps to regulate the rate of vehicles entering the motorway and thus to preserve the motorway capacity. In general, RM algorithms fall into two categories by their effective scope: local control and coordinated control. Local control algorithm determines the metering rate based on the traffic condition on adjacent motorway mainline and the on-ramp. Conversely, coordinated RM strategies make use of measurements from the entire motorway network to operate individual ramp signals for optimal performance at the network level. This study proposes a multi-hierarchical strategy for on-ramp coordination. The strategy is structured in two layers. At the higher layer, a centralised, predictive controller plans the coordination control within a long update interval based on the location of high-risk breakdown flow. At the lower layer, reactive controllers determine the metering rates of those ramps involved in the ramp coordination with a short update interval. This strategy is modelled and applied to the northbound model of the Pacific Motorway in a micro-simulation platform (AIMSUN). The simulation results show that the proposed strategy effectively delays the onset of congestion and reduces total congestion with better managed on-ramp queues.