Does it matter whether friends, parents, or peers drink walk? Identifying which normative influences predict young pedestrian's decisions to walk while intoxicated

Drink walking, that is walking in a public place while intoxicated, is associated with increased risk of injury and fatality. Young people and males are especially prone to engaging in this behaviour, yet little is known about the factors associated with individual’s decisions to drink walk. The present research explores the role of different normative influences (friendship group norm, parent group norm, university peer group norm) and perceived risk, within an extended theory of planned behaviour (TPB) framework, in predicting young people’s self-reported drink walking intentions. One hundred and eighteen young people (aged 17-25 years) completed a survey including sociodemographic measures and extended TPB measures related to drink walking. Overall the extended TPB explained 72.8% of the variance in young people’s intentions to drink walk in the next six months with attitude, perceived behavioural control, friendship group norm, and gender (male) emerging as significant predictors. Males, as compared with females, had higher intentions to drink walk and lower perceptions of risk regarding drink walking. Together, these findings provide a clearer indication of the salient normative influences and gender differences in young pedestrian’s decisions to walk while intoxicated. Such findings can be used to inform future interventions designed to reduce injuries and fatalities associated with drink walking.

Identifying and characterising crashes of returning riders - a new approach

Surveys have identified that many older motorcyclists are returning riders but it is difficult to draw conclusions about their crash risk because of discrepancies in definitions and the inability to identify returning riders in official crash databases. Analyses of NSW crash data were undertaken in which returning riders were defined as aged 25 and over, holding a full licence 10 years prior to the crash, and not the registered operator of one or more motorcycles during the 5-10 years prior to the crash. Based on this definition, there were 472 riders in casualty crashes in 2005-09 who were returning riders (5.5% of riders aged 25 and over in casualty crashes) and the characteristics of their crashes were similar to those involving continuing riders. In contrast, crashes of new riders were more likely to have characteristics suggestive of relatively more riding in urban areas, probably for transport rather than recreation. More work is recommended to assess the validity of the definition to allow a better understanding of the effects of long periods away from riding on riding skills and crash risk.

Utilising hospital data to inform product safety prioritisation : the application of RAPEX severity rankings in ICD-coded burn data

Background The implementation of the Australian Consumer Law in 2011 highlighted the need for better use of injury data to improve the effectiveness and responsiveness of product safety (PS) initiatives. In the PS system, resources are allocated to different priority issues using risk assessment tools. The rapid exchange of information (RAPEX) tool to prioritise hazards, developed by the European Commission, is currently being adopted in Australia. Injury data is required as a basic input to the RAPEX tool in the risk assessment process. One of the challenges in utilising injury data in the PS system is the complexity of translating detailed clinical coded data into broad categories such as those used in the RAPEX tool. Aims This study aims to translate hospital burns data into a simplified format by mapping the International Statistical Classification of Disease and Related Health Problems (Tenth Revision) Australian Modification (ICD-10-AM) burn codes into RAPEX severity rankings, using these rankings to identify priority areas in childhood product-related burns data. Methods ICD-10-AM burn codes were mapped into four levels of severity using the RAPEX guide table by assigning rankings from 1-4, in order of increasing severity. RAPEX rankings were determined by the thickness and surface area of the burn (BSA) with information extracted from the fourth character of T20-T30 codes for burn thickness, and the fourth and fifth characters of T31 codes for the BSA. Following the mapping process, secondary data analysis of 2008-2010 Queensland Hospital Admitted Patient Data Collection (QHAPDC) paediatric data was conducted to identify priority areas in product-related burns. Results The application of RAPEX rankings in QHAPDC burn data showed approximately 70% of paediatric burns in Queensland hospitals were categorised under RAPEX levels 1 and 2, 25% under RAPEX 3 and 4, with the remaining 5% unclassifiable. In the PS system, prioritisations are made to issues categorised under RAPEX levels 3 and 4. Analysis of external cause codes within these levels showed that flammable materials (for children aged 10-15yo) and hot substances (for children aged <2yo) were the most frequently identified products. Discussion and conclusions The mapping of ICD-10-AM burn codes into RAPEX rankings showed a favourable degree of compatibility between both classification systems, suggesting that ICD-10-AM coded burn data can be simplified to more effectively support PS initiatives. Additionally, the secondary data analysis showed that only 25% of all admitted burn cases in Queensland were severe enough to trigger a PS response.

Effective punishment experiences : the need for a more comprehensive approach to conceptualising behavioural punishers and reinforcers in a road safety context

Determining what consequences are likely to serve as effective punishment for any given behaviour is a complex task. This chapter focuses specifically on illegal road user behaviours and the mechanisms used to punish and deter them. Traffic law enforcement has traditionally used the threat and/or receipt of legal sanctions and penalties to deter illegal and risky behaviours. This process represents the use of positive punishment, one of the key behaviour modification mechanisms. Behaviour modification principles describe four types of reinforcers: positive and negative punishments and positive and negative reinforcements. The terms ‘positive’ and ‘negative’ are not used in an evaluative sense here. Rather, they represent the presence (positive) or absence (negative) of stimuli to promote behaviour change. Punishments aim to inhibit behaviour and reinforcements aim to encourage it. This chapter describes a variety of punishments and reinforcements that have been and could be used to modify illegal road user behaviours. In doing so, it draws on several theoretical perspectives that have defined behavioural reinforcement and punishment in different ways. Historically, the main theoretical approach used to deter risky road use has been classical deterrence theory which has focussed on the perceived certainty, severity and swiftness of penalties. Stafford and Warr (1993) extended the traditional deterrence principles to include the positive reinforcement concept of punishment avoidance. Evidence of the association between punishment avoidance experiences and behaviour has been established for a number of risky road user behaviours including drink driving, unlicensed driving, and speeding. We chose a novel way of assessing punishment avoidance by specifying two sub-constructs (detection evasion and punishment evasion). Another theorist, Akers, described the idea of competing reinforcers, termed differential reinforcement, within social learning theory (1977). Differential reinforcement describes a balance of reinforcements and punishments as influential on behaviour. This chapter describes comprehensive way of conceptualising a broad range of reinforcement and punishment concepts, consistent with Akers’ differential reinforcement concept, within a behaviour modification framework that incorporates deterrence principles. The efficacy of three theoretical perspectives to explain self-reported speeding among a sample of 833 Australian car drivers was examined. Results demonstrated that a broad range of variables predicted speeding including personal experiences of evading detection and punishment for speeding, intrinsic sensations, practical benefits expected from speeding, and an absence of punishing effects from being caught. Not surprisingly, being younger was also significantly related to more frequent speeding, although in a regression analysis, gender did not retain a significant influence once all punishment and reinforcement variables were entered. The implications for speed management, as well as road user behaviour modification more generally, are discussed in light of these findings. Overall, the findings reported in this chapter suggest that a more comprehensive approach is required to manage the behaviour of road users which does not rely solely on traditional legal penalties and sanctions.

Translating vision research into policy and practice to improve the visibility, and hence safety, or road workers at night

The process of translating research into policy and practice is not well understood. This paper uses a case study approach to interpret an example of translation with respect to theoretical approaches identified in the literature. The case study concerns research into “biological motion” or “biomotion”: when lights are placed on the moveable joints of the body and the person moves in a dark setting, there is immediate and accurate recognition of the human form although only the lights can be seen. QUT was successful in gaining Australian Research Council funding with the support of the predecessors of the Queensland Department of Transport and Main Roads (TMR) to research the biomotion effect in road worker clothing using reflective tape rather than lights, and this resulted in the incorporation of biomotion marking into AS/NZS 4602.1 2011. The most promising approach to understanding the success of this translation, SWOV’s “knowledge utilisation approach” provided some insights but was more descriptive than predictive and provided “necessary but not sufficient” conditions for translation. In particular, the supportive efforts of TMR staff engaged in the review and promulgation of national standards were critical in this case. A model of the conclusions is presented. The experiences gained in this case should provide insights into the processes involved in effectively translating research into practice.

Driver licensing experience of Korean Australians

Graduated licensing has been identified as the most promising approach to reducing the crash risk of novice drivers. However, research suggests that the effectiveness of graduated licensing appears to differ between urban and rural novice drivers and according to race or ethnicity. Extensive supervised driving practice as a learner driver is an important component of graduated licensing systems in Australia and many other countries. Earlier CARRS-Q research identified that falsification of logbooks was more common among particular demographic groups. The factors underlying this are not well understood. It is unclear whether this reflects a lack of understanding of the importance of supervised practice (given that it is not a licensing requirement in many countries of origin), or it reflects lack of access to vehicles and supervising drivers, or whether there is less respect for driver licensing requirements among some groups. It is possible that the importance of these factors may differ across ethnic groups, depending on socioeconomic factors and cultural attitudes to road safety. In an attempt to better understand these issues, this study presents some preliminary results of focus groups examining the experience of the Queensland Graduated Driver Licensing System by Korean-Australian novice drivers and their parents.

Determinants of drink-driving and association between drink-driving and road traffic fatalities in Ghana

Background Drink-driving has been implicated in many road traffic crashes in the world. Consequently, the developed countries have prioritized drink-driving research. Contrary, drink-driving research has not attained any meaningful consideration in many developing countries. It is therefore imperative to intensify drink-driving research so as to provide research driven solutions to the menace. Aims The objective is to establish determinants of drink-driving and its association with traffic crashes in Ghana. Methods A randomized roadside breathalyzer survey was conducted. A multivariable logistic regression was used to establish significant determinants of drink-driving and a bivariate logistic regression to establish the association between drink–driving and road traffic crashes in Ghana. Results In total, 2,736 motorists were randomly stopped for breath testing of whom 8.7% tested positive for alcohol. Among the total participants, 5.5% exceeded the legal BAC limit of 0.08%. Formal education is associated with a reduced likelihood of drink-driving compared with drivers without formal education. The propensity to drink-drive is 1.8 times higher among illiterate drivers compared with drivers with basic education. Young adult drivers also recorded elevated likelihoods for driving under alcohol impairment compared with adult drivers. The odds of drink-driving among truck drivers is OR=1.81, (95% CI=1.16 to 2.82) and two wheeler riders is OR=1.41, (95% CI=0.47 to 4.28) compared with car drivers. Contrary to general perception, commercial car drivers have a significant reduced likelihood of 41%, OR=0.59, (95% CI=0.38 to 0.92) compared with the private car driver. Bivariate analysis conducted showed a significant association between the proportion of drivers exceeding the legal BAC limit and road traffic fatalities, p<0.001. The model predicts a 1% increase in the proportion of drivers exceeding the legal BAC to be associated with a 4% increase in road traffic fatalities, 95% CI= 3% to 5% and vice versa. Discussion and conclusion A positive and significant association between roadside alcohol prevalence and road traffic fatality has been established. Scaling up roadside breath test, determining standard drink and disseminating to the populace and formulating policies targeting the youth such as increasing minimum legal drinking age and reduced legal BAC limit for the youth and novice drivers might improve drink-driving related crashes in Ghana.

An examination of the legislative framework governing commuter safety in the Queensland Mining Industry

Commuting in the mining industry -Background -The problem -Journey management -The structure of the legislative framework Legislation and Regulation -Workplace safety in Queensland mining -Risk management -Mining legislation and journey management -Commuting and employee responsibilities -Queensland Workers’ Compensation Scheme Industry standards -Industry standards and journey management Regulated and organisational policy documents -Policy documents and journey management Observations & Conclusions

Utilising hospital data to inform product safety prioritisation : the application of RAPEX severity rankings in ICD-coded Burn Data

Background The implementation of the Australian Consumer Law in 2011 highlighted the need for better use of injury data to improve the effectiveness and responsiveness of product safety (PS) initiatives. In the PS system, resources are allocated to different priority issues using risk assessment tools. The rapid exchange of information (RAPEX) tool to prioritise hazards, developed by the European Commission, is currently being adopted in Australia. Injury data is required as a basic input to the RAPEX tool in the risk assessment process. One of the challenges in utilising injury data in the PS system is the complexity of translating detailed clinical coded data into broad categories such as those used in the RAPEX tool. Aims This study aims to translate hospital burns data into a simplified format by mapping the International Statistical Classification of Disease and Related Health Problems (Tenth Revision) Australian Modification (ICD-10-AM) burn codes into RAPEX severity rankings, using these rankings to identify priority areas in childhood product-related burns data. Methods ICD-10-AM burn codes were mapped into four levels of severity using the RAPEX guide table by assigning rankings from 1-4, in order of increasing severity. RAPEX rankings were determined by the thickness and surface area of the burn (BSA) with information extracted from the fourth character of T20-T30 codes for burn thickness, and the fourth and fifth characters of T31 codes for the BSA. Following the mapping process, secondary data analysis of 2008-2010 Queensland Hospital Admitted Patient Data Collection (QHAPDC) paediatric data was conducted to identify priority areas in product-related burns. Results The application of RAPEX rankings in QHAPDC burn data showed approximately 70% of paediatric burns in Queensland hospitals were categorised under RAPEX levels 1 and 2, 25% under RAPEX 3 and 4, with the remaining 5% unclassifiable. In the PS system, prioritisations are made to issues categorised under RAPEX levels 3 and 4. Analysis of external cause codes within these levels showed that flammable materials (for children aged 10-15yo) and hot substances (for children aged <2yo) were the most frequently identified products. Discussion and conclusions The mapping of ICD-10-AM burn codes into RAPEX rankings showed a favourable degree of compatibility between both classification systems, suggesting that ICD-10-AM coded burn data can be simplified to more effectively support PS initiatives. Additionally, the secondary data analysis showed that only 25% of all admitted burn cases in Queensland were severe enough to trigger a PS response.

A qualitative investigation of drug use among Pakistani road users

Background Statistics on drug use by Pakistani drivers are not available, yet considerable numbers of drivers are believed to be drug addicted. The National Drug Abuse Assessment 2006/07, conducted by the United Nation Office on Drugs and Crime and the Ministry of Narcotics Control Pakistan reported that opiate users numbered 628,000, of which 77%were chronic heroin abusers. Injecting drug users have reportedly doubled in the decade to 2006 and drug use has been linked with many major crashes involving professional drivers. Aims This study explored a broad range of risk taking behaviours of road users, including drug use. It also investigated associations between risky road use and fatalism and other cultural beliefs. Methods This paper reports findings relating to drug driving in the cities of Lahore, Rawalpindi and Islamabad. Thirty semi-structured interviews were conducted with bus, truck, and taxi drivers, policy makers and field police officers. Results Interviews suggested widespread use of illicit drugs, particularly among bus, truck and taxi drivers. Reasons for drug use included recreational purposes, stimulants during long driving episodes, and substance addiction. Furthermore, the use of drugs and any association with road crashes was generally viewed as linked to fatalism rather than to any fault of an individual. In other words, people did not believe there was an association between drug use and road crashes, even if they had personally experienced such. Police knowledge of drug use among drivers was evident, although there is no formal drug driving testing regime in Pakistan. Discussion and conclusions The substantial increase in drug use among the population in recent years highlights a significant public health challenge in Pakistan. This qualitative research, although recognized as not representative of the broader population, suggests that there is significant cause for concern about drug driving, especially among professional drivers, and a need for further investigation and intervention.

The role of sleepiness, sleep disorders, and the work environment on heavy-vehicle crashes in 2 Australian states

Heavy-vehicle driving involves a challenging work environment and a high crash rate. We investigated the associations of sleepiness, sleep disorders, and work environment (including truck characteristics) with the risk of crashing between 2008 and 2011 in the Australian states of New South Wales and Western Australia. We conducted a case-control study of 530 heavy-vehicle drivers who had recently crashed and 517 heavy-vehicle drivers who had not. Drivers' crash histories, truck details, driving schedules, payment rates, sleep patterns, and measures of health were collected. Subjects wore a nasal flow monitor for 1 night to assess for obstructive sleep apnea. Driving schedules that included the period between midnight and 5:59 am were associated with increased likelihood of crashing (odds ratio = 3.42, 95% confidence interval: 2.04, 5.74), as were having an empty load (odds ratio = 2.61, 95% confidence interval: 1.72, 3.97) and being a less experienced driver (odds ratio = 3.25, 95% confidence interval: 2.37, 4.46). Not taking regular breaks and the lack of vehicle safety devices were also associated with increased crash risk. Despite the high prevalence of obstructive sleep apnea, it was not associated with the risk of a heavy-vehicle nonfatal, nonsevere crash. Scheduling of driving to avoid midnight-to-dawn driving and the use of more frequent rest breaks are likely to reduce the risk of heavy-vehicle nonfatal, nonsevere crashes by 2–3 times.

An extracellular signal-regulated kinase 2 survival pathway mediates resistance of human mesothelioma cells to asbestos-induced injury

We hypothesized that normal human mesothelial cells acquire resistance to asbestos-induced toxicity via induction of one or more epidermal growth factor receptor (EGFR) - linked survival pathways (phosphoinositol-3-kinase/AKT/ mammalian target of rapamycin and extracellular signal - regulated kinase [ERK] 1/2) during simian virus 40 (SV40) transformation and carcinogenesis. Both isolated HKNM-2 mesothelial cells and a telomerase-immortalized mesothelial line (LP9/TERT-1) were more sensitive to crocidolite asbestos toxicity than an SV40 Tag-immortalized mesothelial line (MET5A) and malignant mesothelioma cell lines (HMESO and PPM Mill). Whereas increases in phosphorylation of AKT (pAKT) were observed in MET5A cells in response to asbestos, LP9/TERT-1 cells exhibited dose-related decreases in pAKT levels. Pretreatment with an EGFR phosphorylation or mitogen-activated protein kinase kinase 1/2 inhibitor abrogated asbestos-induced phosphorylated ERK (pERK) 1/2 levels in both LP9/TERT-1 and MET5A cells as well as increases in pAKT levels in MET5A cells. Transient transfection of small interfering RNAs targeting ERK1, ERK2, or AKT revealed that ERK1/2 pathways were involved in cell death by asbestos in both cell lines. Asbestos-resistant HMESO or PPM Mill cells with high endogenous levels of ERKs or AKT did not show dose-responsive increases in pERK1/ERK1, pERK2/ERK2, or pAKT/AKT levels by asbestos. However, small hairpin ERK2 stable cell lines created from both malignant mesothelioma lines were more sensitive to asbestos toxicity than shERK1 and shControl lines, and exhibited unique, tumor-specific changes in endogenous cell death - related gene expression. Our results suggest that EGFR phosphorylation is causally linkedto pERK and pAKT activation by asbestos in normal and SV40 Tag - immortalized human mesothelial cells. They also indicate that ERK2 plays a role in modulating asbestos toxicity by regulating genes critical to cell injury and survival that are differentially expressed in human mesotheliomas.

Evaluation framework for green procurement in road construction

Purpose Most barriers and enablers of sustainable projects are related to procurement. This study proposes a framework for evaluating green procurement practices throughout the lifecycle of road construction projects and demonstrates its application through an Australian case study. Design/methodology/approach The study is based on linking the phases of road construction with incentive mechanisms for proactively motivating behavioural change. A holistic view on utilised and potential incentives is attempted with a literature review and a state-of-practice review. The latter is based on interviews and 90 policy and procurement documents across five Australian states. Findings An evaluation framework with seven procurement stages is suggested to describe current state green procurement incentives throughout the delivery lifecycle of road construction projects. The Australian case study was found to provide useful data to identify gaps and strong points of the different states regarding their level of integration of sustainability and greenhouse gas emissions GHG) reduction elements in their procurement practices. This understanding was used to draw recommendations on future advancement of green procurement. Originality/value: Government entities across the globe can impact considerably the achievement of sustainability and GHG targets, by using their procurement practices and requirements to create incentives for contractors and suppliers to engage in more GHG conscious practices. The present study provides a systematic account of how green procurement practices can be underpinned using the Australian road construction industry as a case study, and distinguish between strong and weak links in the green procurement chain to draw recommendations for future initiatives.