1000 resultados para redução de oxigênio


Relevância:

20.00% 20.00%

Publicador:

Resumo:

This research aims at the study of treatment of clothes washing water through biological treatment, for the purpose of evaluating the reduction of phosphorus to make it suitable for a posterior treatment of physical-chemical. For this purpose it was employed a sequencing batch reactor, consisting of aerobic and anaerobic phases. During the project it was verified not only the reduction of phosphorus (removal of 30 to 50%) but also the reduction of BOD, COD, Turbidity and Nitrate (removal of 38 to 36%, 34 to 41%, 72,3 to 75% and 57,8 to 60% respectively), which demonstrates that the proposed treatment can assist advanced treatments of water for its non potable reuse

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The deslignification with oxygen, also denominated pre-O2, consists in a whitening stage, which consists of accomplishing an oxidation of the lignin, and remove it with the alkali, providing a larger earnings in the bleaching of the pulp. The pre-O2 is a process already very established, where a significant part of the cellulose of whitened short fiber produced nowadays suffers deslignification for this method. The conditions of work of this stage contemplate directly in the results of the deslignification level, in the physical, optical and mechanics properties of the pulp, and consequently of the paper, because this is important to know their effects fully. The main variables related to the control of this process are respectively: pressure and oxygen load, alkaline load, consistence, time and temperature, being this last variable was the study focus in this work. The objective of the work was to analyze the effect of the variation of the temperature in the oxygen whitening along every bleaching process of the pulp, refine and in the optical, physics and mechanics properties of the paper. The development of the work was based in four temperature levels (90, 95, 100 and 105°C) combined to two whitening sequences (OD0(E+P)D1P and OAHTD0(E+P)D1P). The results obtained in the oxygen deslignification stage indicated that the elevation of the temperature contemplated in increases of the whiteness, deslignification efficiency and in the viscosity loss allied to the reduction of the selectivity of the process. In the remaining of the whitening, the sequence that included the acid hydrolysis presented values slightly inferior of whiteness, kappa number, viscosity and yield in relation to the other sequence when compared with the samples of same temperatures. Already the physical tests showed that the sequence with acid stage amplifies the values of capillary... (Complete abstract click electronic access below)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work consists of the implementation of the steps Define, Measure , Analyze , Improve and Control ( DMAIC ) to develop a Six Sigma project in an industry the food industry. The objective was to demonstrate a potential for reducing the occurrence of crushed cans in potting milk powder industry in a White Belt project. The food industry accounts for about 9 % of Brazil's gross domestic product ( GDP ), generating thousands of jobs . Among the major sectors of the food industry is the manufacturing sector of milk , occupies approximately 10 % of the total turnover of the food industry . Brazil is considered today one of the eight largest producers of milk powder in the world. The milk powder is packed , mostly for aluminum cans that are lined internally with varnishes and other materials to protect the milk of metals from aluminum. When the cans are dented food protection is compromised and may lead ingestion causing dis-eases such as botulism. Aiming to solve the problem of dented cans methodology was used as a case study with a quantitative approach through the DMAIC method. Some quality tools used in each step of the project as brainstorming , cause and effect diagram , flowchart , ef-fort and impact matrix, 5W1H , among other Pareto diagram is presented . A survey about the disposal of cans in the company verifying a mean loss and, from this histor-ical , a goal loss was calculated was performed . With the target set we calculated the annual saving design . During application of DMAIC was found that the highest rate of loss occurred in transportation between the factory and the factory that fills cans milk . Several actions were taken to resolve problems that resulted in dented cans and the first two months of phase control it was found that the smaller losses calculated target resulting in a saving for the company. The short time of implementa-tion of the Improve phase did not allow a more detailed a ...

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In the last years, the maintenance took an essential role inside the productive system. Plan and manage the maintenance actions in an efficient way, are vital activities for higher production availability. This paper presents an application of a Multicriteria Decision Analysis method in a chemical industry, willing to priories a plan action for the reduction of the maintenance cost. The method used was the PROMETHEE II, with it the results were obtained through the softwares Microsoft Excel and Decision Lab

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work aimed to develop a biological system for removal of ammonia nitrogen operating at low concentrations of dissolved oxygen. Thus, a biological upflow vertical reactor was built, in which the affluent pass through the support media until the top. Sludge from an anaerobic stabilization pond of a slaughterhouse unit in the city of Presidente Prudente - SP was used as inoculum. Initially the system operated in batch and afterwards in a continuous flow with different HRT. For feeding the reactor, an initial phases was adopted a synthetic culture media, described by Martins (2007), in order to establish the ideal conditions for the development of Anammox bacteria and subsequently, submitted to the system a slugde effluent of slaughterhouse. The results showed significant removal efficiency of N-NH4+, especially in the phase without recirculation of culture media, with an average of 71% removal, with the proportion of removal of N-NH4 +:N-NO2- average 1: 1,69. For the period of operation with effluent from the slaughterhouse, were not obtained satisfactory results, without confirmation of the proliferation of Anammox bacteria in the system, due to the high presences of organic matter in the same confirmed by high concentrations of COD

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work has a focus on project execution DMAIC ( Define Measure Analyze Implement Control) , using the statistical and quality tools to identify , analyze and implement improvements in a given process in order to reduce costs telephony transport of a multinational consumer goods . The multinational consumer goods to be studied has outsourced carriers who perform the distribution of its products , which may lead them straight to their factories or one of its distribution centers to the points of sale ( supermarkets , bakeries , gas stations , convenience cafeterias , among others ) . Whenever there is an unexpected situation or some problem at the time of delivery of the goods to the customer opens an occurrence , ie , the carrier responsible for contacts ( 0800 ) with the contact center company of consumer goods which in turn registers the occurrence, analyzes and sends a response action to the carrier . This work will study the problem with a high number of connections to handle occurrence , through analysis and data collection , identify improvement opportunities, implement them and monitor the results to ensure that the gain and loss reduction are sustainable

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Mass spectrometry is an analytical technique widely used in several areas of academic research. It allows the knowledge of the information about the micro-world of atoms leading to significant advances in science today. The analysis of stable isotopes of carbon, hydrogen, oxygen, nitrogen and sulfur, also known as bio-elements, shows itself as a major area of interest in using the proposed method. The development of techniques and equipment coupled with mass spectrometry promises to deliver even greater progress in this field, in particular, for the biological sciences and related areas. The pyrolytic method in reduction of organic compounds at high temperatures provides simultaneous isotopic analysis of bio-elements H and O, by the gases released, H2 and CO after the pyrolitic process, significantly reducing analysis time and the amount of material to sample. This paper presents a review of mass spectrometry with its basic principles of operation, and pyrolytic method for reducing compounds at temperatures above 1400 ° C for isotopic analysis of bio-elements

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The increasing rate of traffic accidents, followed by the high rate of mortality due to these occurrences, favored to the classification of traffic accidents as a public health problem in Brazil. These accidents consume a significant portion of Gross Domestic Product (GDP), especially related to the victims. Considering this scenery with many tragedies and resources being spent only in the end, this paper seeks to examine the influence of federal highways lighting by reducing the number of accidents. Federal Highways sections that received lighting were taken up for study, therefore a survey of statistical data has been raised considering the accidents before and after the route had been illuminated. Taking advantage of the results obtained, an economic analysis has been made considering the amounts consumed by traffic accidents versus the values required for the installation of lighting on highways

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In today's competitive environment of automakers, it is essential to obtain the highest efficiency of the production process. This paper presents a study in a pre-assembly of brake pipes and fuel of a vehicle where the value stream maps and information (VSM – Value Stream Mapping) were designed in order to improve the process by reducing the Lead Time Production of a product, reducing waste and decrease time between processes. This work can be divided into three stages, the first building the VSM of the initial state, the second VSM of the proposed state and finally the VSM than was actually performed and to present the gains were achieved effectively. The proposed VSM would lead to a gain of 54% in lead time and 61% in processing time, since the VSM implemented had gains of 47% in lead time and 48% in processing time even without major investments as originally proposed. Concluding that even without big investment, using the techniques of lean manufacturing is possible to achieve high levels of process efficiency

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O glicerol é um importante subproduto de processos fermentativos. Em algumas bebidas alcoólicas, como vinhos e vodcas contribuem com seu sabor tornando-a aceitável para o consumidor. Com o incentivo na produção de biocombustíveis, a disponibilidade do glicerol deve aumentar, já que é o principal subproduto gerado na produção do Biodiesel. A sua presença em alguns alimentos, pode identificar presença de microrganismos, já que pode ser uma fonte de carbono para eles. Devido às inúmeras utilizações do glicerol para diversos tipos de indústrias, a dosagem do glicerol se torna cada vez mais importante e rotineira. Isso incentiva novas pesquisas de métodos de doseamento. A enzima GK é presente em vários microrganismos e converte o glicerol em glicerol-3-fosfato. Com a utilização da enzima Glicerol -3- fofato desidrogenase, o glicerol - 3 – fosfato é convertido a di-hidroxi-acetona fosfato com a produção de NADH. Este pode ser quantificado através do espectrofotômetro, tornando-se um rápido e eficiente método para doseamento. A levedura recombinante Pichia pastoris foi escolhida pois foi inserida no seu DNA, o Gene GUT1 que expressa a GK em Saccharomyces cerevisiae. Além disso, a expressão enzimática é extracelular, diminuindo etapas no processo de isolamento da enzima GK. O trabalho consistiu em otimizar a produção de GK expressa pela levedura recombinante Pichia pastoris por meio da adição de oxigênio no biorreator de fermentação em escala de 2,5 L. Os resultados do presente estudo indicam o ponto ótimo de oxigenação em fermentador nos parâmetros estabelecidos é de 2,0 lpm tanto para a produção de enzimática quanto para biomassa formada

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Continuous improvement of industrial processes is one way to become companies more competitive in the market. For this, a fairly widespread use is the methodology of lean production systems, by eliminating waste. One of the tools of these systems is the method of rapid exchange of die or also called SMED, which will be applied in this study. The study aims to develop proposals for reducing the time of set up of two machines in two machining lines, watching also the ergonomics and safety conditions in this operations. The set up time reduction is justified among others, due to increase the machine productivity. In applying the connecting rod machining line, there were two types of exchange. Reductions in time to set up proposals reached values of 47% to one of them, and 55% to the other. It is important to underline that to reach this result, there was no need for large investments. In the application in block machining line, was developed an improvement in the ergonomic area. It was placed a pulley block that came to increase the time of tool change. Aiming to improve the security of the exchange, without productivity loss, the method was applied to reduce this time. It was developed two proposals.: the first would reduce that time by 19%, and does not require many resources of the company. The second involves the parallelization of the exchange, so that the reduction is 48%. However, this proposal requires one more manpower at the time of exchange and it is not always possible

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Currently the market requires companies to adapt for they can have the lowest possible cost in their manufacturing, be it a good or service, thus obtaining a greater profit. For this profit the Toyota Production System applies lean manufacturing practices actions with reduced spending, smaller lots and stocks, generated by market demand. The technique allows SMED with few actions, changes and investments that time does not exceed one digit on your total time. This case study shows that only with standardization and use of inexpensive improvements, could reduce setup time on a machine for 70 minutes to time of approximately 48 minutes with little investment, demonstrating the viability of the tool presented

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Zootecnia - FCAV