Evaluation of kissing bond in composite adhesive lap joints using digital image correlation: Preliminary studies

The assembly of aerospace and automotive structures in recent years is increasingly carried out using adhesives. Adhesive joints have advantages of uniform stress distribution and less stress concentration in the bonded region. Nevertheless, they may suffer due to the presence of defects in bond line and at the interface or due to improper curing process. While defects like voids, cracks and delaminations present in the adhesive bond line may be detected using different NDE methods, interfacial defects in the form of kissing bond may go undetected. Attempts using advanced ultrasonic methods like nonlinear ultrasound and guided wave inspection to detect kissing bond have met with limited success stressing the need for alternate methods. This paper concerns the preliminary studies carried out on detectability of dry contact kissing bonds in adhesive joints using the Digital Image Correlation (DIC) technique. In this attempt, adhesive joint samples containing varied area of kissing bond were prepared using the glass fiber reinforced composite (GFRP) as substrates and epoxy resin as the adhesive layer joining them. The samples were also subjected to conventional and high power ultrasonic inspection. Further, these samples were loaded till failure to determine the bond strength during which digital images were recorded and analyzed using the DIC method. This noncontact method could indicate the existence of kissing bonds at less than 50% failure load. Finite element studies carried out showed a similar trend. Results obtained from these preliminary studies are encouraging and further tests need to be done on a larger set of samples to study experimental uncertainties and scatter associated with the method. (C) 2013 Elsevier Ltd. All rights reserved.

Training for Antenna Selection in Time-Varying Channels: Optimal Selection, Energy Allocation, and Energy Efficiency Evaluation

Single receive antenna selection (AS) is a popular method for obtaining diversity benefits without the additional costs of multiple radio receiver chains. Since only one antenna receives at any time, the transmitter sends a pilot multiple times to enable the receiver to estimate the channel gains of its N antennas to the transmitter and select an antenna. In time-varying channels, the channel estimates of different antennas are outdated to different extents. We analyze the symbol error probability (SEP) in time-varying channels of the N-pilot and (N+1)-pilot AS training schemes. In the former, the transmitter sends one pilot for each receive antenna. In the latter, the transmitter sends one additional pilot that helps sample the channel fading process of the selected antenna twice. We present several new results about the SEP, optimal energy allocation across pilots and data, and optimal selection rule in time-varying channels for the two schemes. We show that due to the unique nature of AS, the (N+1)-pilot scheme, despite its longer training duration, is much more energy-efficient than the conventional N-pilot scheme. An extension to a practical scenario where all data symbols of a packet are received by the same antenna is also investigated.

Evaluation of microwave assisted grafted sago starch as controlled release polymeric carrier

In the present investigation an attempt has been made to develop a new co-polymeric material for controlled release tablet formulations. The acrylamide grafting was successfully performed on the backbone of sago starch. The modified starch was tested for acute toxicity and drug-excipient compatibility study. The grafted material was used in making of controlled release tablets of lamivudine. The formulations were evaluated for physical characteristics such as hardness, friability, %drug content and weight variations. The in vitro release study showed that the optimized formulation exhibited highest correlation (R) value in case of Higuchi model and the release mechanism of the optimized formulation predominantly exhibited combination of diffusion and erosion process. There was a significant difference in the pharmacokinetic parameters (T-max, C-max, AUC, V-d, T-1/2 and MDT) of the optimized formulation as compared to the marketed conventional tablet Lamivir (R) was observed. The pharmacokinetics parameters were showed controlled pattern and better bioavailability. The optimized formulation exhibited good stability and release profile at the accelerated stability conditions. (c) 2013 Elsevier B.V. All rights reserved.

Non-Destructive Evaluation of Defects and Damage in Composite Materials and Structures

The mechanical behaviour of composite materials differs from that of conventional structural materials owing to their heterogeneous and anisotropic nature. Different types of defects and anomalies get induced in these materials during the fabrication process. Further, during their service life, the components made of composite materials develop different types of damage. The performance and life of such components is governed by the combined effect of all these defects and damage. While porosity, voids, inclusions etc., are some defects those can get induced during the fabrication of composites, matrix cracks, interface debonds, delaminations and fiber breakage are major types of service induced damage which are of concern. During the service life of components made of composites, one type of damage can grow and initiate another type of damage. For example, matrix cracks can gradually grow to the interface and initiate debonds. Interface debonds in a particular plane can lead to delaminations. Consequently, the combined effect of different types of distributed damage causes the failure of the component. A set of non-destructive evaluation (NDE) methods is well established for testing conventional metallic materials. Some of them can also be utilized for composite materials as they are, and in some cases with a little different approach or modification. Ultrasonics, Radiography, Thermography, Fiber Optics, Acoustic Emision Techniques etc., to name a few. Detection, evaluation and characterization of different types of defects and damage encountered in composite materials and structures using different NDE tools is discussed briefly in this paper.

Strength and fatigue life evaluation of composite laminate with embedded sensors

Prognosis regarding durability of composite structures using various Structural Health Monitoring (SHM) techniques is an important and challenging topic of research. Ultrasonic SHM systems with embedded transducers have potential application here due to their instant monitoring capability, compact packaging potential toward unobtrusiveness and non-invasiveness as compared to non-contact ultrasonic and eddy current techniques which require disassembly of the structure. However, embedded sensors pose a risk to the structure by acting as a flaw thereby reducing life. The present paper focuses on the determination of strength and fatigue life of the composite laminate with embedded film sensors like CNT nanocomposite, PVDF thin films and piezoceramic films. First, the techniques of embedding these sensors in composite laminates is described followed by the determination of static strength and fatigue life at coupon level testing in Universal Testing Machine (UTM). Failure mechanisms of the composite laminate with embedded sensors are studied for static and dynamic loading cases. The coupons are monitored for loading and failure using the embedded sensors. A comparison of the performance of these three types of embedded sensors is made to study their suitability in various applications. These three types of embedded sensors cover a wide variety of applications, and prove to be viable in embedded sensor based SHM of composite structures.

Combining data sets of satellite-retrieved products for basin-scale water balance study: 2. Evaluation on the Mississippi Basin and closure correction model

In this study, we applied the integration methodology developed in the companion paper by Aires (2014) by using real satellite observations over the Mississippi Basin. The methodology provides basin-scale estimates of the four water budget components (precipitation P, evapotranspiration E, water storage change Delta S, and runoff R) in a two-step process: the Simple Weighting (SW) integration and a Postprocessing Filtering (PF) that imposes the water budget closure. A comparison with in situ observations of P and E demonstrated that PF improved the estimation of both components. A Closure Correction Model (CCM) has been derived from the integrated product (SW+PF) that allows to correct each observation data set independently, unlike the SW+PF method which requires simultaneous estimates of the four components. The CCM allows to standardize the various data sets for each component and highly decrease the budget residual (P - E - Delta S - R). As a direct application, the CCM was combined with the water budget equation to reconstruct missing values in any component. Results of a Monte Carlo experiment with synthetic gaps demonstrated the good performances of the method, except for the runoff data that has a variability of the same order of magnitude as the budget residual. Similarly, we proposed a reconstruction of Delta S between 1990 and 2002 where no Gravity Recovery and Climate Experiment data are available. Unlike most of the studies dealing with the water budget closure at the basin scale, only satellite observations and in situ runoff measurements are used. Consequently, the integrated data sets are model independent and can be used for model calibration or validation.

Monitoring A Micromechanical Process In Macroscale Carbon Nanotube Films And Fibers

The evaluation of mechanical properties of carbon nanotube (CNT) fibers is inherently difficult. Here, Raman scattering-a generic methodology independent of mechanical measurements-is used to determine the interbundle strength and microscopic failure process for various CNT macroarchitectures. Raman data are used to predict the moduli of CNT films and fibers, and to illustrate the influences of the twisting geometries on the fibers' mechanical performances.

Damage evaluation and damage localization of rock

Knowledge of damage accumulation and corresponding failure evolution are prerequisite for effective maintenance of civil engineering so as to avoid disaster. Based on statistical mesoscopic damage mechanics, it was revealed that there are three stages in the process of deformation, damage and failure of multiscale heterogeneous elastic-brittle medium. These are uniformly distributed damage, localized damage and catastrophic failure. In order to identify the transitions from scattering damage to macroscopically localized one, a condition for damage localization was given. The experiments of rock under uniaxial compression with the aid of observations of acoustic emission and speckle correlation do support the concept of localization. This provides a potential approach to properly evaluate damage accumulation in practice. In addition, it is found in the experiments that catastrophic failure displays critical sensitivity. This gives a helpful clue to the prediction of catastrophic failure. (C) 2004 Elsevier Ltd. All rights reserved.

The Relationship between Risk and Expected Return in Europe

Revised: 2006-07

Gestión del riesgo operativo en las entidades de crédito: un camino sin retorno

[ES] Este trabajo presenta la problemática de la gestión del riesgo operativo en las entidades de crédito en el ámbito europeo. Aprobado el texto definitivo del denominado Comité de Supervisión Bancaria (Basilea II), con especial y novedosa regulación del riesgo operativo, amanece como inminente su integración e la regulación bancaria de la UE, y, por tanto, su pronta implantación y supervisión por las autoridades monetarias y financieras. Esta nueva normativa, de carácter flexible y profesional, introduce en el seno del gobierno corporativo de las entidades de crédito nuevos elementos que afectarán a su cultura interna (cultura de gestión de los riesgos), afectando a las decisiones estratégicas y a la organización de las entidades, incentivando a la mejora de la calidad de sus procesos, servicios y operaciones. Todo lo cual supone una acicate para perseguir la eficiencia continua a nivel individual y a nivel del sistema financiero, con visos de adquirir dimensión estratégica. De esta manera, se abre un espacio para la investigación y creatividad en la aplicación y desarrollo de los postulados científicos de la Economía de la Empresa, con posibilidades de incorporarlos a otros sectores empresariales de similar afectación por los riesgos operativos.

Consumer Expertise or Credit Risk? An empirical analysis of mortgage pricing

Loan mortgage interest rates are usually the result of a bank-customer negotiation process. Credit risk, consumer cross-buying potential, bundling, financial market competition and other features affecting the bargaining power of the parties could affect price. We argue that, since mortgage loan is a complex product, consumer expertise could be a relevant factor for mortgage pricing. Using data on mortgage loan prices for a sample of 1055 households for the year 2005 (Bank of Spain Survey of Household Finances, EFF-2005), and including credit risk, costs, potential capacity of the consumer to generate future business and bank competition variables, the regression results indicate that consumer expertise-related metrics are highly significant as predictors of mortgage loan prices. Other factors such as credit risk and consumer cross-buying potential do not have such a significant impact on mortgage prices. Our empirical results are affected by the credit conditions prior to the financial crisis and could shed some light on this issue.

Deportividad y violencia en el fútbol base: un programa de evaluación y de prevención de partidos de riesgo

Este trabajo ha recibido el “Primer Premio Delegación del Gobierno en Aragón a las buenas prácticas contra la delincuencia juvenil” (Convocatoria 2007).

Hydroacoustic evaluation of spawning red hind (Epinephelus guttatus) aggregations along the coast of Puerto Rico in 2002 and 2003

Red hind (Epinephelus guttatus) have been overfished in the Caribbean and were included with seven other regional grouper species deemed vulnerable to risk of extinction. The Puerto Rico Department of Natural and Environmental Resources desired to map spawning red hind aggregations within commonwealth waters as part of their resource management program for the species. Mobile hydroacoustic surveys were conducted over 3-day periods in 2002 and 2003, indexed to the full moon phase in February or March when red hind were known to aggregate. Four vessels concurrently sampled the southwest, south, and southeast coasts of Puerto Rico in 2002. In 2003, three vessels conducted complementary surveys of the northwest, north, and northeast coasts of the island, completing a circuit of the coastal shelf-spawning habitat. These surveys indicated that red hind spawning aggregations were prevalent along the south and west coasts, and sparse along the north coast during the survey periods. Highest spawning red hind concentrations were observed in three areas offshore of the west coast of Puerto Rico, around Mona and Desecheo islands (20,443 and 10,559 fish/km2, respectively) and in the Bajo de Cico seasonal closed area (4,544 fish/km2). Following both 2002 and 2003 surveys, a series of controlled acoustic measurements of known local fish species in net pens were conducted to assess the mean target strength (acoustic backscatter) of each group. Ten species of fish were measured, including red hind (E. guttatus), coney (E. fulvus), white grunt (Haemulon plumieri), pluma (Calamus pennatula), blue tang (Acanthurus coeruleus), squirrel fish (Holocentrus spp.), black durgeon (Melichtyhs niger), ocean file fish (Canthidermis sufflamen), ocean surgeon fish (Acanthurus bahianus), and butter grouper (Mycteroperca spp.). In general, the mean target strength results from the caged fish experiments were in agreement with published target strength length relationships, with the exception of white grunt and pluma.

Design,optimization and in vivo evaluation of non-viral vectors for gene therapy. Applications in ocular disorders

227 págs.