Raman spectroscopic study of the antimonate mineral bahianite Al5Sb35+O14(OH)2

Raman spectroscopy has been used to characterise the antimonate mineral bahianite Al5Sb35+O14(OH)2 , a semi-precious gem stone. The mineral is characterised by an intense Raman band at 818 cm-1 assigned to Sb3O1413- stretching vibrations. Other lower intensity bands at 843 and 856 cm-1 are also assigned to this vibration and this concept suggests the non-equivalence of SbO units in the structure. Low intensity Raman bands at 669 and 682 cm-1 are probably assignable to the OSbO antisymmetric stretching vibrations. Raman bands at 1756, 1808 and 1929 cm-1 may be assigned to δ SbOH deformation modes, whilst Raman bands at 3462 and 3495 cm-1 are assigned to AlOH stretching vibrations. Complexity in the low wave number region is attributed to the composition of the mineral.

An application of near-infrared and mid-infrared spectroscopy to the study of selected minerals

Near-infrared spectroscopy is a somewhat unutilised technique for the study of minerals. The technique has the ability to determine water content, hydroxyl groups and transition metals. In this paper we show the application of NIR spectroscopy to the study of selected minerals. The structure and spectral properties of two Cu-tellurite minerals graemite and teineite are compared with bismuth containing tellurite mineral smirnite by the application of NIR and IR spectroscopy. The position of Cu2+ bands and their splitting in the electronic spectra of tellurites are in conformity with octahedral geometry distortion. The spectral pattern of smirnite resembles graemite and the observed band at 10855 cm-1 with a weak shoulder at 7920 cm-1 is identified as due to Cu2+ ion. Any transition metal impurities may be identified by their bands in this spectral region. Three prominent bands observed in the region of 7200-6500 cm-1 are the overtones of water whilst the weak bands observed near 6200 cm-1in tellurites may be attributed to the hydrogen bonding between (TeO3)2- and H2O. The observation of a number of bands centred at around 7200 cm-1 confirms molecular water in tellurite minerals. A number of overlapping bands in the low wavenumbers 4500-4000 cm-1 is the result of combinational modes of (TeO3)2−ion. The appearance of the most intense peak at 5200 cm-1 with a pair of weak bands near 6000 cm-1 is a common feature in all the spectra and is related to the combinations of OH vibrations of water molecules, and bending vibrations ν2 (δ H2O). Bending vibrations δ H2O observed in the IR spectra shows a single band for smirnite at 1610 cm-1. The resolution of this band into number of components is evidenced for non-equivalent types of molecular water in graemite and teineite. (TeO3)2- stretching vibrations are characterized by three main absorptions at 1080, 780 and 695 cm-1.

ePortfolios and preservice teachers : governing at a distance through non-human actors

This chapter seeks to develop an analysis of the contemporary use of the ePortfolio (Electronic Portfolio) in education practices. Unlike other explorations of this new technology which are deterministic in their approach, the authors seek to reveal the techniques and practices of government which underpin the implementation of the e-portfolio. By interrogating a specific case study example from a large Australian university’s preservice teacher program, the authors find that the e-portfolio is represented as eLearning technology but serves to govern students via autonomization and self responsibilization. Using policy data and other key documents, they are able to reveal the e-portfolio as a delegated authority in the governance of preservice teachers. However, despite this ongoing trend, they suggest that like other practices of government, the e-portfolio will eventually fail. This however the authors conclude opens up space for critical thought and engagement which is not afforded presently.

A Raman spectroscopic study of the antimonite mineral peretaite Ca(SbO)4(OH)2(SO4)2•2H2O

Raman spectra of mineral peretaite Ca(SbO)4(OH)2(SO4)2•2H2O were studied, and related to the structure of the mineral. Raman bands observed at 978 and 980 cm-1 and a series of overlapping bands observed at 1060, 1092, 1115, 1142 and 1152 cm-1 are assigned to the SO42- ν1 symmetric and ν3 antisymmetric stretching modes. Raman bands at 589 and 595 cm-1 are attributed to the SbO symmetric stretching vibrations. The low intensity Raman bands at 650 and 710 cm-1 may be attributed to SbO antisymmetric stretching modes. Raman bands at 610 cm-1 and at 417, 434 and 482 cm-1 are assigned to the SO42- 4 and 2 bending modes, respectively. Raman bands at 337 and 373 cm-1 are assigned to O-Sb-O bending modes. Multiple Raman bands for both SO42- and SbO stretching vibrations support the concept of the non-equivalence of these units in the coquandite structure.

Detection and Estimation of Nonstationary Power Transients

This chapter looks at issues of non-stationarity in determining when a transient has occurred and when it is possible to fit a linear model to a non-linear response. The first issue is associated with the detection of loss of damping of power system modes. When some control device such as an SVC fails, the operator needs to know whether the damping of key power system oscillation modes has deteriorated significantly. This question is posed here as an alarm detection problem rather than an identification problem to get a fast detection of a change. The second issue concerns when a significant disturbance has occurred and the operator is seeking to characterize the system oscillation. The disturbance initially is large giving a nonlinear response; this then decays and can then be smaller than the noise level ofnormal customer load changes. The difficulty is one of determining when a linear response can be reliably identified between the non-linear phase and the large noise phase of thesignal. The solution proposed in this chapter uses “Time-Frequency” analysis tools to assistthe extraction of the linear model.

The insured's non-disclosure in the formation of insurance contracts : a comparative perspective

The requirements that an insured disclose all facts material to a transaction as well as not misrepresent material facts in the formation of an insurance contract are universal requirements of insurance law. The nature and extent of these obligations varies from one jurisdiction to the next. Disclosure in the insurance context is distinct from the general approach in commercial contracts, and in others between persons dealing at arm's length. It is the purpose of this article therefore to examine, on a comparative basis, the approaches adopted in the Anglo-Commonwealth context of England, Australia New Zealand and Singapore to the resolution of disclose issues in the formation of insurance contracts. Particular attention is focused on the Insurance Contracts Act 1984 (Australia) as this statue effects the most significant overhaul of the common law and the National Consumer Council in the United Kingdom has advocated that similar reforms be adopted.

The impact of corporate venturing on a firm's competence modes

In this conceptual paper we investigate how corporate venturing influences an organization's competences. The impact of various types of corporate ventures on the portfolio of strategic options of a firm's competence modes (Sanchez, 2004a; Sanchez & Heene, 2002) will be assessed by distinguishing two fundamentally different dimensions of corporate venturing: technology and product (Block & MacMillan, 1993). We argue that the level of product and factor market dynamism mediates the effect of corporate venturing on a firm's competence modes. Corporate ventures that significantly increase the level of product or factor market dynamics will increase the flexibility in all five competence modes. These ventures have a direct effect on the lower-order competence modes and an indirect, lagged effect on higher-order competence modes through feedback loops. The developed framework and the propositions contribute to managing the ability of a firm to change its coordination, resource, and operating flexibility in order to sustain value creation.

Porous polyurethane coatings bonded onto surface-modified titanium substrates for the growth of an endothelial cell layer

Cardiovascular diseases refer to the class of diseases that involve the heart or blood vessels (arteries and veins). Examples of medical devices for treating the cardiovascular diseases include ventricular assist devices (VADs), artificial heart valves and stents. Metallic biomaterials such as titanium and its alloy are commonly used for ventricular assist devices. However, titanium and its alloy show unacceptable thrombosis, which represents a major obstacle to be overcome. Polyurethane (PU) polymer has better blood compatibility and has been used widely in cardiovascular devices. Thus one aim of the project was to coat a PU polymer onto a titanium substrate by increasing the surface roughness, and surface functionality. Since the endothelium of a blood vessel has the most ideal non-thrombogenic properties, it was the target of this research project to grow an endothelial cell layer as a biological coating based on the tissue engineering strategy. However, seeding endothelial cells on the smooth PU coating surfaces is problematic due to the quick loss of seeded cells which do not adhere to the PU surface. Thus it was another aim of the project to create a porous PU top layer on the dense PU pre-layer-coated titanium substrate. The method of preparing the porous PU layer was based on the solvent casting/particulate leaching (SCPL) modified with centrifugation. Without the step of centrifugation, the distribution of the salt particles was not uniform within the polymer solution, and the degree of interconnection between the salt particles was not well controlled. Using the centrifugal treatment, the pore distribution became uniform and the pore interconnectivity was improved even at a high polymer solution concentration (20%) as the maximal salt weight was added in the polymer solution. The titanium surfaces were modified by alkli and heat treatment, followed by functionlisation using hydrogen peroxide. A silane coupling agent was coated before the application of the dense PU pre-layer and the porous PU top layer. The ability of the porous top layer to grow and retain the endothelial cells was also assessed through cell culture techniques. The bonding strengths of the PU coatings to the modified titanium substrates were measured and related to the surface morphologies. The outcome of the project is that it has laid a foundation to achieve the strategy of endothelialisation for the blood compatibility of medical devices. This thesis is divided into seven chapters. Chapter 2 describes the current state of the art in the field of surface modification in cardiovascular devices such as ventricular assist devices (VADs). It also analyses the pros and cons of the existing coatings, particularly in the context of this research. The surface coatings for VADs have evolved from early organic/ inorganic (passive) coatings, to bioactive coatings (e.g. biomolecules), and to cell-based coatings. Based on the commercial applications and the potential of the coatings, the relevant review is focused on the following six types of coatings: (1) titanium nitride (TiN) coatings, (2) diamond-like carbon (DLC) coatings, (3) 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer coatings, (4) heparin coatings, (5) textured surfaces, and (6) endothelial cell lining. Chapter 3 reviews the polymer scaffolds and one relevant fabrication method. In tissue engineering, the function of a polymeric material is to provide a 3-dimensional architecture (scaffold) which is typically used to accommodate transplanted cells and to guide their growth and the regeneration of tissue. The success of these systems is dependent on the design of the tissue engineering scaffolds. Chapter 4 describes chemical surface treatments for titanium and titanium alloys to increase the bond strength to polymer by altering the substrate surface, for example, by increasing surface roughness or changing surface chemistry. The nature of the surface treatment prior to bonding is found to be a major factor controlling the bonding strength. By increasing surface roughness, an increase in surface area occurs, which allows the adhesive to flow in and around the irregularities on the surface to form a mechanical bond. Changing surface chemistry also results in the formation of a chemical bond. Chapter 5 shows that bond strengths between titanium and polyurethane could be significantly improved by surface treating the titanium prior to bonding. Alkaline heat treatment and H2O2 treatment were applied to change the surface roughness and the surface chemistry of titanium. Surface treatment increases the bond strength by altering the substrate surface in a number of ways, including increasing the surface roughness and changing the surface chemistry. Chapter 6 deals with the characterization of the polyurethane scaffolds, which were fabricated using an enhanced solvent casting/particulate (salt) leaching (SCPL) method developed for preparing three-dimensional porous scaffolds for cardiac tissue engineering. The enhanced method involves the combination of a conventional SCPL method and a step of centrifugation, with the centrifugation being employed to improve the pore uniformity and interconnectivity of the scaffolds. It is shown that the enhanced SCPL method and a collagen coating resulted in a spatially uniform distribution of cells throughout the collagen-coated PU scaffolds.In Chapter 7, the enhanced SCPL method is used to form porous features on the polyurethane-coated titanium substrate. The cavities anchored the endothelial cells to remain on the blood contacting surfaces. It is shown that the surface porosities created by the enhanced SCPL may be useful in forming a stable endothelial layer upon the blood contacting surface. Chapter 8 finally summarises the entire work performed on the fabrication and analysis of the polymer-Ti bonding, the enhanced SCPL method and the PU microporous surface on the metallic substrate. It then outlines the possibilities for future work and research in this area.

Indig-curious : what are the challenges for non Aboriginal theatre practitioners in accessing and interpreting Aboriginal themes?

How do non-Indigenous theatre practitioners, especially actors, access and incorporate Aboriginal themes in the plays they create or perform in? Will it ever be acceptable for a non-Aboriginal actor to play an Aboriginal role? In literature there are clear protocols for writing Aboriginal characters and themes. In the visual arts and in dance, non-Indigenous practitioners might 'reference' Aboriginal themes, but what about in theatre performance? This research embodies one cultural dilemma in a creative project and exegesis: exploring the complex issues which emerge when an Aboriginal playwright is commissioned to write an 'Aboriginal themed' play for two non-Aboriginal actors.

Economics of non-market innovation and digital literacy

This article is an abbreviated version of a debate between two economists holding somewhat different perspectives on the nature of non-market production in the space of new digital media. While the ostensible focus here is on the role of markets in the innovation of new technologies to create new economic value, this context also serves to highlight the private and public value of digital literacy.

Regulating non-executive directors in Australia : a socio-legal approach

Discusses the role of legislation and codes of conduct in influencing the behaviour of non-executive directors. Outlines the functions of a board of directors and considers the role on non-executive directors in particular. Traces the development of standards of skill required on non-executive directors both under the Australian Corporations Act 2001 and under common law. Questions whether these have brought about a real change in behaviour. Considers whether professionalisation of directorship could be more effective.

Non-motorised public transport : the past, the present, the future

Non-motorized public transport (NMPT) involves cycle-powered vehicles that carry several passengers and a small amount of goods; and provide flexible hail-and-ride services. Effectively they are non-motorized taxis. NMPT is widespread in developing countries, where it caters for a wide range of mobility needs. Common forms include cycle-rickshaw (Bangladesh, India), becak (Indonesia), cyclos (Vietnam, Cambodia), bicitaxi (Columbia, Cuba). Over the last 10-15 years there has also been a re-emergence of NMPT in the form of pedicabs in many developed countries because of the operating flexibility of NMPT, its eco-sustainability, and its ability to operate where use of motorized vehicles is restricted. In particular, in cities such as Berlin, London, New York and Vancouver, pedicabs are making the transition from ‘novelty’ to ‘serious’ transport mode. This is creating new transport policy/planning questions about pedicab operation and integration. This paper examines the phenomenon of NMPT and where it is heading. It uses case studies from Asia/Latin America and Europe/North America to examine emerging NMPT issues and possible responses, and how this may affect NMPT in Australia and New Zealand where it is still somewhat a ‘novelty’ but has potential as both an opportunity and a challenge.

An examination of the sentencing remarks of Indigenous and non-Indigenous criminal defendants in South Australia’s Higher Courts

Recent Australian research on Indigenous sentencing primarily explores whether disparities in sentencing outcomes exist. Little is known about how judges perceive or refer to Indigenous defendants and their histories, and how they interpret the circumstances of Indigenous defendants in justifying their sentencing decisions. Drawing on the ‘focal concerns’ approach, this study presents a narrative analysis of a sample of judges’ sentencing remarks for Indigenous and non-Indigenous criminal defendants convicted in South Australia’s Higher Courts. The analysis found that the sentencing stories of Indigenous and non-Indigenous offenders differed in ways that possibly reduced assessments of blameworthiness and risk for Indigenous defendants.