Measurement of transverse energy-energy correlations in multi-jet events in pp collisions at s√=7 TeV using the ATLAS detector and determination of the strong coupling constant αs(mZ)

High transverse momentum jets produced in pp collisions at a centre of mass energy of 7 TeV are used to measure the transverse energy--energy correlation function and its associated azimuthal asymmetry. The data were recorded with the ATLAS detector at the LHC in the year 2011 and correspond to an integrated luminosity of 158 pb−1. The selection criteria demand the average transverse momentum of the two leading jets in an event to be larger than 250 GeV. The data at detector level are well described by Monte Carlo event generators. They are unfolded to the particle level and compared with theoretical calculations at next-to-leading-order accuracy. The agreement between data and theory is good and provides a precision test of perturbative Quantum Chromodynamics at large momentum transfers. From this comparison, the strong coupling constant given at the Z boson mass is determined to be αs(mZ)=0.1173±0.0010 (exp.) +0.0065−0.0026 (theo.).

The impact of urban noise on primary schools: perceptive evaluation and objective assessment

This paper aims to assess the impact of environmental noise in the vicinity of primary schools and to analyze its influence in the workplace and in student performance through perceptions and objective evaluation. The subjective evaluation consisted of the application of questionnaires to students and teachers, and the objective assessment consisted of measuring in situ noise levels. The survey covered nine classes located in three primary schools. Statistical Package for Social Sciences was used for data processing and to draw conclusions. Additionally, the relationship of the difference between environmental and background noise levels of each classroom and students with difficulties in hearing the teacherâ s voice was examined. Noise levels in front of the school, the schoolyard, and the most noise-exposed classrooms (occupied and unoccupied) were measured. Indoor noise levels were much higher than World Health Organization (WHO) recommended values: LAeq,30min averaged 70.5 dB(A) in occupied classrooms, and 38.6 dB(A) in unoccupied ones. Measurements of indoor and outdoor noise suggest that noise from the outside (road, schoolyard) affects the background noise level in classrooms but in varying degrees. It was concluded that the façades most exposed to road traffic noise are subjected to values higher than 55.0 dB(A), and noise levels inside the classrooms are mainly due to the schoolyard, students, and the road traffic. The difference between background (LA95,30min) and the equivalent noise levels (LAeq,30min) in occupied classrooms was 19.2 dB(A), which shows that studentsâ activities are a significant source of classroom noise.

Seguidor do ponto de máxima potência multi-conversor para sistemas solares fotovoltaicos

Dissertação de mestrado integrado em Engenharia Eletrónica Industrial e de Computadores

A busca da comunicação na sociedade multi-ecrãs: perspectiva ecológica

Este texto reflexiona sobre una nueva forma de concebir la televisión como servicio público, resaltando las dificultades y problemas que plantea analizar el concepto de la calidad de la televisión, si no se tiene en cuenta la dimensión emotiva y de entretenimiento del medio. Posteriormente, el autor pretende ubicar la televisión en el contexto de la multiplicidad de otras pantallas y tecnologías, subrayando las cuestiones del sentido y de la calidad de vida, desde un modelo ecológico. Finalmente, se apuntan algunas contribuciones para profundizar el concepto y las experiencias de alfabetización digital.

Aplicação móvel android de apoio a gestão de empréstimos e reservas das bibliotecas da Universidade do Minho

Dissertação de mestrado integrado em Engenharia de Telecomunicações e Informática

Behavior-based price discrimination in a multi-dimensional preferences market

NIPE WP 04/ 2016

Development of a novel aptamer-based multi-sensor device for the detection of osteopontin

Doctoral Dissertation for PhD degree in Chemical and Biological Engineering

Normal values of echocardiographic measurements. A population-based study

OBJECTIVE: To describe echocardiographic measurements and left ventricular mass in a population sample of healthy adults inhabitants of the urban region of Porto Alegre. METHODS: An analytical, observational, population-based, cross-sectional study was done. Through a multi-stage probability sample, 114 individuals were selected to be submitted to a M-mode and two-dimensional echocardiogram with color Doppler. The analyses were restricted to healthy participants. Echocardiographic measurements were described by mean, standard deviation, 95 percentile and 95% confidence limits. RESULTS: A total of 100 healthy participants, with several characteristics similar to those from the original population, had a complete and reliable echocardiographic examination. The measurements of aorta, left atrium, interventricular septum, left ventricle in systole and diastole, left posterior wall and left ventricular mass, adjusted or not for body surface area or height, were significantly higher in males. The right ventricle size was similar among the genders. Several echocardiographic measurements were within standard normal limits. Interventricular septum, left posterior wall and left ventricular mass, adjusted or not for anthropometric measurements, and aortic dimensions had lower mean and range than the reference limits. CONCLUSION: The means and estimates of distribution for the measurements of interventricular septum, left posterior wall and left ventricular mass found in this survey were lower than those indicated by the international literature and accepted as normal limits.

Optimização do processo de recolha de resíduos: desenvolvimento de ferramentas de investigação operacional para o problema de orientação de equipas com multi-restrições

Tese de Doutoramento em Engenharia Industrial e de Sistemas.

New integrative computational approaches unveil the Saccharomyces cerevisiae pheno-metabolomic fermentative profile and allow strain selection for winemaking

During must fermentation by Saccharomyces cerevisiae strains thousands of volatile aroma compounds are formed. The objective of the present work was to adapt computational approaches to analyze pheno-metabolomic diversity of a S. cerevisiae strain collection with different origins. Phenotypic and genetic characterization together with individual must fermentations were performed, and metabolites relevant to aromatic profiles were determined. Experimental results were projected onto a common coordinates system, revealing 17 statistical-relevant multi-dimensional modules, combining sets of most-correlated features of noteworthy biological importance. The present method allowed, as a breakthrough, to combine genetic, phenotypic and metabolomic data, which has not been possible so far due to difficulties in comparing different types of data. Therefore, the proposed computational approach revealed as successful to shed light into the holistic characterization of S. cerevisiae pheno-metabolome in must fermentative conditions. This will allow the identification of combined relevant features with application in selection of good winemaking strains.

Um modelo de planeamento económico aplicado ao sector agro-alimentar em Portugal: utilização da análise multi-objectivos.

Doutoramento em Economia.

Optimisation of a surface mount technology process using a SnAgCu lead-free alloy

The impending introduction of lead-free solder in the manufacture of electrical and electronic products has presented the electronics industry with many challenges. European manufacturers must transfer from a tin-lead process to a lead-free process by July 2006 as a result of the publication of two directives from the European Parliament. Tin-lead solders have been used for mechanical and electrical connections on printed circuit boards for over fifty years and considerable process knowledge has been accumulated. Extensive literature reviews were conducted on the topic and as a result it was found there are many implications to be considered with the introduction of lead-free solder. One particular question that requires answering is; can lead-free solder be used in existing manufacturing processes? The purpose of this research is to conduct a comparative study of a tin-lead solder and a lead-free solder in two key surface mount technology (SMT) processes. The two SMT processes in question were the stencil printing process and the reflow soldering process. Unreplicated fractional factorial experimental designs were used to carry out the studies. The quality of paste deposition in terms of height and volume were the characteristics of interest in the stencil printing process. The quality of solder joints produced in the reflow soldering experiment was assessed using x-ray and cross sectional analysis. This provided qualitative data that was then uniquely scored and weighted using a method developed during the research. Nested experimental design techniques were then used to analyse the resulting quantitative data. Predictive models were developed that allowed for the optimisation of both processes. Results from both experiments show that solder joints of comparable quality to those produced using tin-lead solder can be produced using lead-free solder in current SMT processes.

Objective function based fuzzy clustering in air traffic management

Data analysis, fuzzy clustering, fuzzy rules, air traffic management

Síndrome Metabólica, Strain e Redução da Função Miocárdica: Multi-Ethnic Study of Atherosclerosis

Fundamento: A doença cardiovascular subclínica é prevalente em pacientes com síndrome metabólica (SM). O strain circunferencial (εCC) e o strain longitudinal (εLL) do ventriculo esquerdo (VE), avaliados pelo ecocardiograma com speckle tracking (STE), são índices de função sistólica: o encurtamento das fibras circunferenciais e longitudinais do VE é indicado por um valor negativo do strain. Portanto, quanto mais negativo o strain, melhor a função sistólica do VE. O εCC e o εLL têm sido usados para demonstrar disfunção ventricular subclínica em vários distúrbios clínicos. Objetivo: Levantamos a hipótese de que a SM está associada com comprometimento da função miocárdica, quando avaliada pelo STE. Métodos: Este estudo analisou participantes do Multi-Ethnic Study of Atherosclerosis (MESA) que realizaram o STE e foram avaliados para todos os componentes da SM. Resultados: Entre os 133 participantes incluídos (mulheres: 63%; idade: 65 ± 9 anos), a prevalência de SM foi de 31% (41/133). Indivíduos com SM apresentaram valores menores do εCC e do εLL que aqueles sem SM (-16,3% ± 3,5% vs. -18,4% ± 3,7%, p < 0,01; e -12,1% ± 2,5% vs. -13,9% ± 2,3%, p < 0,01, respectivamente). A fração de ejeção do VE (FEVE) foi semelhante nos dois grupos (p = 0,09). Na análise multivariada, a SM associou-se a um valor mais baixo do strain circunferencial (B = 2,1%, IC 95%: 0,6-3,5; p < 0,01), mesmo após ajuste para idade, etnia, massa VE e FEVE. De maneira semelhante, a presença de SM (B = 1,3%, IC 95%: 0,3-2,2; p < 0,01) e a massa do VE (B = 0,02%, IC 95%: 0,01 0,03; p = 0,02) associaram-se a um valor menor do strain longitudinal após ajuste para etnia, FEVE e creatinina. Conclusão: O εCC e o εLL do VE, marcadores de doença cardiovascular subclínica, estão comprometidos em indivíduos assintomáticos com SM e sem história prévia de infarto miocárdico, insuficiência cardíaca e/ou de FEVE < 50%.

Attitudes toward corporate sustainability : a multi-item scale and a multi-country empirical analysis

Magdeburg, Univ., Fak. für Wirtschaftswiss., Diss., 2013