Recycling leather waste: preparing and studying on the microstructure, mechanical, and rheological properties of leather waste/rubber composite

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Life cycle assessment applied to municipal solid waste management: a case study

This study analyzes the environmental performance of the Municipal Solid Waste Management System (MSWMS) of Piedade, São Paulo, from a systemic perspective. A life cycle assessment (LCA) technique was applied according to an attributional approach to evaluate both the current operational situation and different prospective scenarios, which were devised based on the application of targets for recycling dry and wet waste suggested by the pre-draft version of the Brazilian Plan for Solid Waste. The life cycle impact assessment method EcoIndicator 99, in association with normalization and weighting procedures, was used to conduct the analysis. It was observed that the adoption of goals of 30%, 50% and 70% for recovering of the recyclable dry waste, resulted in improvement of the environmental performance of the waste management system under analysis, respectively of 10%, 15% and 20%. It was also possible to detect an evolution in the order of 54% in reducing impacts resulting from the adoption of targets for composting. LCA proved to be effective for the evaluation of the environmental performance of MSWMS-Piedade. However, for future evaluations, the attributional approach should be replaced by the methodological practice of substitution to enable the avoided burdens to be considered in estimations of the environmental performance municipal solid waste management systems.

The ability of Nile tilapia to regulate protein and energy intake evaluated by carbon relative enrichement

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Orange and mango byproducts: agro-industrial waste as source of bioactive compounds and botanical versus commercial description: a review

Vegetal origin agro-industrial wastes are seen as a problem since the beginning of the industrial processes; however, they are becoming attractive as raw material for numerous purposes such as active enzymes and in the molecule bioprospecting area. Moreover, it is difficult to understand what the studied residue is consisted of in studies on agro-industrial waste, since the wastes names and constituents may vary according to the used equipment, as for waste from orange and mango processing. Thus, defining a specific waste, including comparisons between botanical and industrial descriptions, can help in understanding studies about wastes. The current review sought to contextualize such a scenario by gathering definitions, relevant information and studies on agro-industrial wastes and by-products, international enzymes market, and recent studies on bioactive compounds. In this context, waste from orange and mango are interesting because of the expression of these fruits on the world market; moreover, the processing does not include steps that could disrupt these biomolecules.

Cultivation and bromatological analysis of the medicinal mushroom Ganoderma lucidum (Curt.: Fr.) P. Karst cultivated in agricultural waste

The objective of the study was to evaluate the production of two strains of Ganoderma lucidum on agricultural waste and carry out bromatological analyses of the basidiomata obtained from the cultivation. The experiment was carried out at the Mushroom Module at the School of Agronomic Sciences of the São Paulo State University (FCA/UNESP - Botucatu, SP, Brazil) and two strains were used (GLM-09/01 and GLM-10/02) which were cultivated on waste, oat straw, bean straw, brachiaria grass straw, Tifton grass straw and eucalyptus sawdust under two situations: with (20%) and without (0%) supplementation with wheat bran. All the waste was taken from dumps of agricultural activities in Botucatu-SP. Both treatments were carried out in 10 repetitions, totaling 200 packages. The mushrooms cultivation took 90 days. Next, the biological efficiency of the treatments and the bromatological analysis of the basidiomata were evaluated. The biological efficiency (BE) values (%) varied from 0.0 to 6.7%. In the mushroom bromatological analyses, the results ranged from 8.7 to 13.7%, from 2.0 to 6.7%, from 0.83 to 1.79% and from 38.8 to 54.5%, for total protein, ethereal extract, ash and crude fiber, respectively. Thus, we conclude that the substrates which presented the greater yield were the brachiaria straw, 20% in both strains tested (GLM-09/01 and GLM-10/02) and the bean straw, 20% in the strain GLM-10/02. The mushrooms showed high levels of ethereal extract, fibers and ashes and a low level of proteins.

Avaliação do desperdício de alimentos prontos para o consumo em Unidade de Alimentação e Nutrição (UAN), do interior do estado de São Paulo

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Análise histopatológica de fígado de tilápias (Oreochromis Niloticus) expostas ao herbicida 2,4-D comercial

The action of man has led, over the years, major impacts on the environment, especially in aquatic ecosystems, leading to an impairment of water quality, considered one of the essential factors for the maintenance of vital functions and consequently the life of the planet. Among the activities considered a risk for the environment are linked to pollution from many sources and even entire watersheds, whether by industrial waste, sewage, or for substances used in agriculture, such as pesticides, herbicides and fertilizers. The (2,4-D) 2,4- dichlorophenoxyacetic acid is used worldwide, and the fact that its genotoxicity is proven by several studies and by its long persistence in soil, which enables the leaching and percolation of compounds affecting water bodies, toxicity studies are relevant and justifiable. Thus, this study aimed to evaluate the toxicity of 2,4-D by examining the liver of the fish Oreochromis niloticus exposed to different dilutions. Portions of liver were collected and fixed for histological and histochemical techniques to detect total proteins, polysaccharides and lipids. lipids. Treatment with 2,4-D herbicide apparently did not alter the lipid profiles, the accumulation of polysaccharides, and the presence of total proteins. The 2.5 and 5.0% were lethal to fish. These mortalities are probably of high toxic and cytotoxic potential of 2,4-D herbicide results. Several histopathological changes were found, such as: loss of cytoplasmic integrity, loss of cell limit, nuclear deformation, vacuolated cytoplasm, tissue disorganization and hydropic degeneration. Statistically significant changes were: hydropic degeneration and vacuolated cytoplasm. It is concluded, therefore, that the qualitative morphological analysis is an important method for observing changes in liver toxicology studies. As the O. niloticus species is an efficient biological indicator of water pollution by 2,4-D

NF99-403 Livestock Waste Management Act (Revised March 2001)

The Livestock Waste Management Act requires all livestock operations with 300 animal units or more to be inspected by the Nebraska Department of Environmental Quality (DEQ) to determine whether livestock wastes contaminate surface or ground water. This NebFact discusses the following parts of the Livestock Waste Management Act: Act (how cited); Terms (defined); Livestock operation, exemption, livestock waste control facility, permit, restriction; Construction permit or operating permit (when required), livestock waste control facilities, classification, restrictions; Section (how construed); Cold water class A streams (designation); Permit (acknowledgment required); Livestock operation (request inspection, when, fees, department, duties); Permits (duration, modification); Permit (application and modification fees, Livestock Waste Management Cash Fund (created, use, investment, report, legislative intent); Applicant (rejection, grounds, application, information required, certification required); Postconstruction inspection requirement; Department (contracts authorized, permit application, notice required); Permit application (approval from Department of Natural Resources and Department of Environmental Quality, powers); Council (rules and regulations); and Enforcement of act (legislative intent).

Análise histopatológica de fígado de tilápias (Oreochromis Niloticus) expostas ao herbicida 2,4-D comercial

The action of man has led, over the years, major impacts on the environment, especially in aquatic ecosystems, leading to an impairment of water quality, considered one of the essential factors for the maintenance of vital functions and consequently the life of the planet. Among the activities considered a risk for the environment are linked to pollution from many sources and even entire watersheds, whether by industrial waste, sewage, or for substances used in agriculture, such as pesticides, herbicides and fertilizers. The (2,4-D) 2,4- dichlorophenoxyacetic acid is used worldwide, and the fact that its genotoxicity is proven by several studies and by its long persistence in soil, which enables the leaching and percolation of compounds affecting water bodies, toxicity studies are relevant and justifiable. Thus, this study aimed to evaluate the toxicity of 2,4-D by examining the liver of the fish Oreochromis niloticus exposed to different dilutions. Portions of liver were collected and fixed for histological and histochemical techniques to detect total proteins, polysaccharides and lipids. lipids. Treatment with 2,4-D herbicide apparently did not alter the lipid profiles, the accumulation of polysaccharides, and the presence of total proteins. The 2.5 and 5.0% were lethal to fish. These mortalities are probably of high toxic and cytotoxic potential of 2,4-D herbicide results. Several histopathological changes were found, such as: loss of cytoplasmic integrity, loss of cell limit, nuclear deformation, vacuolated cytoplasm, tissue disorganization and hydropic degeneration. Statistically significant changes were: hydropic degeneration and vacuolated cytoplasm. It is concluded, therefore, that the qualitative morphological analysis is an important method for observing changes in liver toxicology studies. As the O. niloticus species is an efficient biological indicator of water pollution by 2,4-D

Production and characterization of poly-(3-hydroxybutyrate) from recombinant Escherichia coli grown on cheap renewable carbon substrates

Although the biopolymer poly-(3-hydroxybutyrate), P[3HB], presents physicochemical properties that make it an alternative material to conventional plastics, its biotechnological production is quite expensive. As carbon substrates contribute greatly to P[3HB] production cost, the utilization of a cheaper carbon substrate and less demanding micro-organisms should decrease its cost. In the present study a 23 factorial experimental design was applied, aiming to evaluate the effects of using hydrolysed corn starch (HCS) and soybean oil (SBO) as carbon substrates, and cheese whey (CW) supplementation in the mineral medium (MM) on the responses, cell dried weigh (DCW), percentage P[3HB] and mass P[3HB] by recombinant Escherichia coli strains JM101 and DH10B, containing the P[3HB] synthase genes from Cupriavidus necator (ex-Ralstonia eutropha). The analysis of effects indicated that the substrates and the supplement and their interactions had positive effect on CDW. Statistically generated equations showed that, at the highest concentrations of HCS, SO and CW, theoretically it should be possible to produce about 2 g L(1) DCW, accumulating 50% P[3HB], in both strains. To complement this study, the strain that presented the best results was cultivated in MM added to HCS, SBO and CW ( in best composition observed) and complex medium (CM) to compare the obtained P[3HB] in terms of physicochemical parameters. The obtained results showed that the P[3HB] production in MM (1.29 g L(-1)) was approximately 20% lower than in CM (1.63 g L(-1)); however, this difference can be compensated by the lower cost of the MM achieved by the use of cheap renewable carbon sources. Moreover, using differential scanning calorimetry and thermogravimetry analyses, it was observed that the polymer produced in MM was the one which presented physicochemical properties (Tg and Tf) that were more similar to those found in the literature for P[3HB].

Red Mud from Brazil: Thermal Behavior and Physical Properties

The main constituents of red mud produced in Aluminio city (S.P., Brazil) are iron, aluminum, and silicon oxides. It has been determined that the average particle diameter for this red mud is between 0.05 and 0.002 mm. It is observed that a decrease in the percentage of smaller particles occurs at temperatures greater than 400 degrees C. This observation corresponds with the thermal analysis and X-ray diffraction (XRD) data, which illustrate the phase transition of goethite to hematite. A 10% mass loss is observed in the thermal analysis patterns due to the hydroxide-oxide phase transitions of iron (primary phase transition) and aluminum (to a lesser extent). The disappearance and appearance of the different phases of iron and aluminum confirms the decomposition reactions proposed by the thermal analysis data. This Brazilian red mud has been classified as mesoporous at all temperatures except between 400 and 500 degrees C where the classification changes to micro/mesoporous.

Sugars metabolism and ethanol production by different yeast strains from coffee industry wastes hydrolysates

Significant amounts of wastes are generated by the coffee industry, among of which, coffee silverskin (CS) and spent coffee grounds (SCG) are the most abundantly generated during the beans roasting and instant coffee preparation, respectively. This study evaluated the sugars metabolism and production of ethanol by three different yeast strains (Saccharomyces cerevisiae, Pichia stipitis and Kluyveromyces fragilis) when cultivated in sugar rich hydrolysates produced by acid hydrolysis of CS and SCG. S. cerevisiae provided the best ethanol production from SCG hydrolysate (11.7 g/l, 50.2% efficiency). On the other hand, insignificant (<= 1.0 g/l) ethanol production was obtained from CS hydrolysate, for all the evaluated yeast strains, probably due to the low sugars concentration present in this medium (approx. 22 g/l). It was concluded that it is possible to reuse SCG as raw material for ethanol production, which is of great interest for the production of this biofuel, as well as to add value to this agro-industrial waste. CS hydrolysate, in the way that is produced, was not a suitable fermentation medium for ethanol production; however, the hydrolysate concentration for the sugars content increase previous the use as fermentation medium could be an alternative to overcome this problem. (C) 2011 Elsevier Ltd. All rights reserved.

Use of cellulose fibers from hemp core in fiber-cement production. Effect on flocculation, retention, drainage and product properties

The aim of this paper is to study the feasibility of using cellulose fibers obtained from an agricultural waste, hemp core (Cannabis Sativa L), through different new environmental friendly cooking processes for fiber-cement production. The physical and mechanical properties of the fiber reinforced concrete, which depend on the nature and morphology of the fibers, matrix properties and the interactions between them, must be kept between the limits required for its application. Therefore, the morphology of the fibers and how its use affects the flocculation, retention and drainage processes in the fiber-cement manufacture, and the mechanical and physical properties of the fiber-cement product have been studied. The use of pulp obtained by means of the hemp core cooking in ethanolamine at 60% concentration at 180 degrees C during 90 min resulted in the highest solids retention and the best mechanical properties among the studied hemp core pulps. (C) 2012 Elsevier B.V. All rights reserved.

Effect of Feed Strategy on Methane Production and Performance of an AnSBBR Treating Effluent from Biodiesel Production

The aim of this work was to investigate the effect of different feeding times (2, 4 and 6 h) and applied volumetric organic loads (4.5, 6.0 and 7.5 gCOD L-1 day(-1)) on the performance of an anaerobic sequencing batch biofilm reactor (AnSBBR) treating effluent from biodiesel production. Polyurethane foam cubes were used as inert support in the reactor, and mixing was accomplished by recirculating the liquid phase. The effect of feeding time on reactor performance showed to be more pronounced at higher values of applied volumetric organic loads (AVOLs). Highest organic material removal efficiencies achieved at AVOL of 4.5 gCOD L-1 day(-1) were 87 % at 4-h feeding against 84 % at 2-h and 6-h feeding. At AVOL of 6.0 gCOD L-1 day(-1), highest organic material removal efficiencies achieved with 4-h and 6-h feeding were 84 %, against 71 % at 2-h feeding. At AVOL of 7.5 gCOD L-1 day(-1), organic material removal efficiency achieved with 4-h feeding was 77 %. Hence, longer feeding times favored minimization of total volatile acids concentration during the cycle as well as in the effluent, guaranteeing process stability and safety.

Adsorption of phosphate from aqueous solution by hydrous zirconium oxide

Synthetic ZrO2 center dot nH(2)O was used for phosphate removal from aqueous solution. The optimum adsorbent dose obtained for phosphate adsorption on to hydrous zirconium oxide was 0.1 g. The kinetic process was described very well by a pseudo-second-order rate model. The phosphate adsorption tended to increase with the decrease in pH. The adsorption capacity increased from 61 to 66 mg g(-1) when the temperature was increased from 298 to 338 K. A phosphate desorption of approximately 74% was obtained using water at pH 12.