Larval development of the sidestriped shrimp (Pandalopsis dispar Rathbun) (Crustacea, Decapoda, Pandalidae) reared in the laboratory

Larval development of the sidestriped shrimp (Pandalopsis dispar) is described from larvae reared in the laboratory. The species has five zoeal stages and one postlarval stage. Complete larval morphological characteristics of the species are described and compared with those of related species of the genus. The number of setae on the margin of the telson in the first and second stages is variable: 11+12, 12+12, or 11+11. Of these, 11+12 pairs are most common. The present study confirms that what was termed the fifth stage in the original study done by Berkeley in 1930 was the sixth stage and that the fifth stage in the Berkeley’s study is comparable to the sixth stage that is described in the present study. The sixth stage has a segmented inner flagellum of the antennule and fully developed pleopods with setae. The ability to distinguish larval stages of P. dispar from larval stages of other plankton can be important for studies of the effect of climate change on marine communities in the Northeast Pacific and for marine resource management strategies.

Larval development of the southern sea garfish (Hyporhamphus melanochir) and the river garfish (H. regularis) (Beloniformes: Hemiramphidae) from South Australian waters

Larval development of the southern sea garfish (Hyporhamphus melanochir) and the river garfish (H. regularis) is described from specimens from South Australian waters. Larvae of H. melanochir and H. regularis have completed notochord flexion at hatching and are characterized by an elongate body with distinct rows of melanophores along the dorsal, lateral, and ventral surfaces; a small to moderate head; a heavily pigmented and long straight gut; a persistent pre-anal finfold; and an extended lower jaw. Fin formation occurs in the following sequence: caudal, dorsal and anal (almost simultaneously), pectoral, and pelvic. Despite the similarities between both species and among hemiramphid larvae in general, H. melanochir larvae are distinguishable from H. regularis by 1) having 58–61 vertebrae (vs. 51–54 for H. regularis); 2) having 12–15 melanophore pairs in longitudinal rows along the dorsal margin between the head and origin of the dorsal fin (vs. 19–22 for H. regularis); and 3) the absence of a large ventral pigment blotch anteriorly on the gut and isthmus (present in H. regularis). Both species can be distinguished from similar larvae of southern Australia (other hemiramphids and a scomberosocid) by differences in meristic counts and pigmentation.

Age, growth, and reproduction of permit (Trachinotus falcatus) in Florida waters

We examined 536 permit (Trachinotus falcatus, 65–916 mm FL) collected from the waters of Florida Keys and from the Tampa Bay area on Florida’s Gulf coast to describe their growth and reproduction.Among permit that we sexed, females ranged from 266 to 916 mm in length (mean=617) and males ranged from 274 to 855 mm (mean=601). Ages of 297 permit ranging from 102 to 900 mm FL were estimated from thin-sectioned otoliths (sagittae). The large proportion of otoliths with an annulus on the margin and an otolith from an OTC-injected fish suggested that a single annulus was formed each year during late spring or early summer.Permit reach a maximum age of at least 23 years.Permit grew rapidly until an age of about five years, and then growth slowed considerably. Male and female von Bertalanffy growth models were not significantly different, and the sexes-combined growth model was FL=753.1(1–e –0.348(Age+0.585)). Gonad development was seasonal, and spawning occurred during late spring and summer over artificial and natural reefs at depths of 10–30 m. Ovaries that contained oocytes in the final stages of oocyte maturation or postovulatory follicles were found during May–July. We estimated that 50% of the females in the population had reached sexual maturity by 547 mm and an age of 3.1 years and that 50% of the males in the population had reached sexual maturity by 486 mm and an age of 2.3 years. Because Florida regulations restrict the maximum size of permit caught in recreational and commercial fisheries to 20-inch (508-mm), most fish harvested are sexually immature. With the current size selectivity of the fishery, the spawning stock biomass of permit could decrease quickly in response to moderate levels of fishing mortality; thus, the regulations in place in Florida to restrict harvest levels appear to be justified.

High productivity and upwelling in the California Current during Oxygen-Isotope Stage 3: diatom evidence

Evidence for vigorous coastal upwelling and enhanced diatom productivity during the latter part of Oxygen-Isotope Stage 3 (OIS-3) is suggested by changes in diatom assemblages in laminated sediment from the northern California margin and in bioturbated and laminated sediment from Santa Barbara Basin. These conditions require strong along-shore or off-shore wind stress off California preceding the onset of global glacial conditions.

Note on Nematopalaemon tenuipes (Henderson, 1893) (Crustacea:Palaemonidae) from the Pakistan coast of Arabian Sea

On a few occasions palaemonid shrimps turned up in the collections from the Karachi fish harbour. The specimens resembled Nematopalaemon tenuipes (Henderson, 1893) but for the walking legs which were invariably missing or incomplete, in the latter case the dactyli were broken at or just near the base. The only reference from Pakistan is in context to its distribution (Holthuis and Miguel, 1984). The abbreviation cl. is used in the text for the carapace length measuring from the orbit to the posterior margin of the carapace.

Pattern of cutaneous wound healing in a live fish Clarias batrachus (L.)(Clariidae, Pisces.)

Incisional wounds of the same length and depth were made on skin between dorsal fin and the lateral line canal of Clarias batrachus and the pattern of wound closure has been studied histologically. Following infliction, a marked change in the colour of the skin surrounding the wound was observed which lasted for about 30 h and restored thereafter. Mucus and blood cells plugged the wound gap shortly after infliction. The epidermis surrounding the wound was found to be detached from the basement membrane. Mass movement of epidermal cells was observed from both side of the wound gap. The epidermal cells at the margin of the wound became hypertrophied. The epidermis became normal by 32 days. The dealing of sub-epidermal tissue indicated degenerative and regenerative changes of muscle fibres. The mucus and blood cells were accumulated in the wound gap and later fine blood vessels were formed. Gradually granulation tissue was formed and fibroblasts and myoblasts appeared. Myoblast differentiated into muscle bundles. The epidermal repair was completed within 35 days.

METHOD FOR ASSESSING EFFECTS OF CIRCUMFERENTIAL FLOW DISTORTION ON COMPRESSOR STABILITY.

This paper describes the development of a new analysis to predict the onset of flow instability for an axial compressor operating in a circumferentially distorted inlet flow. A relatively simple model is used to examine the influence of various distortions in setting this instability point. It is found that the model reproduces known experimental trends for the loss of stability margin with increasing distortion amplitude and with changes in reduced frequency.

Effects of rotating inlet distortion on multistage compressor stability

In multi-spool engines, rotating stall in an upstream compressor will impose a rotating distortion on the downstream compressor, thereby affecting its stability margin. In this paper experiments are described in which this effect was simulated by a rotating screen upstream of several multistage low-speed compressors. The measurements are complemented by, and compared with, a theoretical model of multistage compressor response to speed and direction of rotation of an inlet distortion. For co-rotating distortions (i.e., distortions rotating in the same direction as rotor rotation), experiments show that the compressors exhibited significant loss in stability margin and that they could be divided into two groups according to their response. The first group exhibited a single peak in stall margin degradation when the distortion speed corresponded to roughly 50% of rotor speed. The second group showed two peaks in stall margin degradation corresponding to distortion speeds of approximately 25-35% and 70-75% of rotor speed. These new results demonstrate that multistage compressors can have more than a single resonant response. Detailed measurements suggest that the two types of behavior are linked to differences between the stall inception processes observed for the two groups of compressors and that a direct connection thus exists between the observed forced response and the unsteady flow phenomena at stall onset. For counter-rotational distortions, all the compressors tested showed minimal loss of stability margin. The results imply that counter-rotation of the fan and core compressor, or LP and HP compressors, could be a worthwhile design choice. Calculations based on the two-dimensional theoretical model show excellent agreement for the compressors which had a single peak for stall margin degradation. We take this first-of-a-kind comparison as showing that the model, though simplified, captures the essential fluid dynamic features of the phenomena. Agreement is not good for compressors which had two peaks in the curve of stall margin shift versus distortion rotation speed. The discrepancy is attributed to the three-dimensional and short length scale nature of the stall inception process in these machines; this includes phenomena that have not yet been addressed in any model.

Axial compressor response to inlet flow distortions by a CFD analysis

The usual approach to compressor design considers uniform inlet flow characteristics. Especially in aircraft applications, the inlet flow is quite often non uniform, and this can result in severe performance degradation. The magnitude of this phenomenon is amplified in military engines due to the complexity of inlet duct configurations and the extreme flight conditions. CFD simulation is an innovative and powerful tool for studying inlet distortions and can bring this inside the very early phases of the design process. This project attempts to study the effects of inlet flow distortions in an axial flow compressor trying to minimize the use computer resources and computational time. The first stage of a low bypass ratio compressor has been analyzed and its clean and distorted performance compared outlining the principal changes due to uneven flow distribution: drop in mass flow, increase in pressure and temperature ratios, decrease in surge margin. Three different studies have then been conducted to better understand the effects of the level, the type and the frequency of the distortion.

Sri Lanka: is it a mid-plate platelet?

Two observations suggest the possibility that Sri Lanka is acting as a small-mid-plate platelet moving very slowly within and relative to the larger Indian plate. First, sediments of the Bengal Deep-Sea Fan off the SSE continental margin are folded and uplifted in a manner similar to the deformation from front of accretionary prisms where thick sediment columns are passing into subduction zones. And second, subsidence rates in the area of presumed spreading or continuing stretching of continental crust, the Cauvery-Palk Strait-Gulf of Mannar Basin, have not decreased during the Cenozoic as would be predicted by an aborted rift or aulacogen model, but instead appear to have accelerated during the Neogene. Information available on other phenomena which re predicted by the model is at the present time inadequate for evaluation.

Larval development of a semi terrestrial mangrove sesarmine crab Chasmagnathus convexus (Crustacea: Decapoda: Brachyura: Grapsidae) reared in laboratory

Four zoeal stages and one megalopal stage were identified in laboratory reared semiterrestrial mangrove sesarmine crab Chasmagnathus convexus. At an average salinity and temperature of 20±1% and 19.2±0.2°C, the megalopa was attained 24 days after hatching. Morphologically, the first zoae of C. convexz1s is very similar to those of other species of the genus Chasmagnathus as well as species of the genus Helice, in that view all share the following characteristics: lateral spine on the carapace, three pairs of setae on the posterior margin of the telson furca, one plus five setae on the endopod of the maxillule, and two plus two setae on the endopod of the maxilla. The differences between the first zoea and megalopa of and those of its congeners are discussed.

Marketing of value-added products from silver carp and involvement of rural people in the production and marketing chain

Cost-profit analysis and market testing of some value-added products from silver carp such as fish mince block, fish sausage, fish ball, fish stick and fish burger were analyzed during April 2001 to March 2002. The study also explored the possibility to involve rural low-income people in the production and marketing of such products. The production of silver carp was higher in greater Jessore and Mymensingh districts but the price remained low during the peak-harvesting season in October to November. The price varied with size of the fish, season, market characteristics and effective demand of the buyers. Price of about 500 g size fish was found to be Tk. 20-25/kg in the rural markets. The average size of fish in the rural markets was 3S0-550 g while that in the urban markets it was 700-1,200 g. The cost of production of the value added products and profit margin were assessed on the basis of market price of the raw material as well as that of the finished products, transportation, storage and marketing costs. The profit margins of 34%, 39%, 81% and 31% of their sales price were obtained for fish sausage, fish ball, fish stick and fish burger, respectively. Actual production cost could be minimized if the fish is purchased directly from the farmers. Consumer's acceptance and marketability tests showed that both rural and urban people preferred fish ball than fish sausage. However, response towards the taste, flavor and color of fish ball and fish sausage was found to vary with occupations and age of the consumers. A correlation was observed between age group and acceptance of new products. Fish ball, fish stick and fish burger were found to be the most preferable items to the farmers because of easy formulation process with common utensils. Good marketing linkage and requirement of capital had been identified as the prerequisites for operating small-scale business on value-added fish products.

A new species of the genus Tor from Yunnan, China (Teleostei : Cyprinidae)

A new species of the subfamily Barbinae, Tor yingjiangensis, is recognized from Yunnan province, China. It can be distinguished from other Tor species by the following combination of characters: last simple dorsal-fin ray osseous and non-serrated; no forward directed predorsal procumbent spine; head length considerably longer than body depth; no tubercles on the snout or sides of the face; 18-20 gill rakers on the outside of first gill arch; 24-26 lateral line scales; median lobe of lower lip short, its posterior margin truncate, not extending to the vertical across the inner corners of the mouth; and the condition of the lower lip consistent in individuals of different sizes. The new species has been misidentified previously as Tor putitora (Hamilton, F. 1822. An account of the fishes found in the River Ganges and its Branches. Edinburgh & London. 405 pp), which occurs in the Ganges and Indus River basins. The new species can easily be distinguished from T. putitora by having 3-3.5 (vs. 2.5) scales from lateral line to pelvic-fin origin, shorter caudal peduncle length (13.0% vs. 17.2% of standard length), lesser body depth (26.4% vs. 24.0% of standard length) and longer caudal peduncle depth (12.0% vs. 10.9% of standard length), no longitudinal stripe present along side of body, and eyes visible in ventral view of head.

Triplophysa rosa sp nov.: a new blind loach from China

A new blind loach of Triplophysa Rendahl 1933 was collected from a subterranean pool in a cave at Wulong County, Chongqing City, China, in November 2002. The new species, named Triplophysa rosa sp. nov., can be distinguished from its congeners by the following unique characters: eyes vestigial; 9 branched dorsal-fin rays; 12 branched pectoral-fin rays; 7 branched pelvic-fin rays; 6 branched anal-fin rays; 7 + 7 branched caudal-fin rays; distal margin of dorsal-fin concave; tip of pelvic-fin surpasses vertical level of anus; caudal-fin deeply forked; whole body scaleless and colourless. (c) 2005 The Fisheries Society of the British Isles.

A new species of genus Pseudogyrinocheilus (Teleostei: Cyprinidae) from Guangxi, China

A new species, Pseudogyrinocheilus longisulcus, was discovered from a tributary of Pearl River in Jingxi Co., Guangxi, China, The new species can be distinguished from other species of Pseudogyrinocheilus by the following combination of characteristics: prolonged post-labial grooves, and extended antero-medially close to anterior end of middle lower lip, but not meeting with its counterpart; posterior margin of lower lip free; scales of abdomen from thorax to pectoral-fin base embedded under skin; lateral-line scales 40-42; dark stripe longitudinal along lateral line on flank. The key to the species of Pseudogyrinocheilus is provided.