Construção de um modelo experimental simulando condições de perfilagem de indução

A ferramenta de indução tem sido, desde 1949, largamente utilizada na prospecção de petróleo pois auxilia na localização de formações que contém hidrocarbonetos. Ainda existem, porém, várias restrições quanto ao uso deste equipamento. Camadas excessivamente finas, poços preenchidos com lamas muito condutivas e grandes diâmetros de invasão são exemplos de situações onde seu desempenho não é bom. Para que se possa minimizar estas limitações é necessário o conhecimento da resposta da sonda diante de condições conhecidas. Isto pode ser feito via modelamento analógico e/ou através de modelamento numérico. O presente trabalho consiste na montagem de um sistema de modelamento analógico capaz de simular o perfil de duas bobinas coaxiais frente a meios infinitos e camadas espessas invadidas. O meio geológico é representado através de solução salina de diferentes condutividades. O fator de escala linear é igual a 20 e o equipamento executa medidas na faixa dos 50 kHz aos 100 kHz. Este sistema será utilizado em futuros estudos envolvendo disposições de bobinas diferentes das normalmente utilizadas e em estudos de outros problemas encontrados na perfilagem de indução.

Jogos digitais educacionais nas aulas de Educação Física: Olympia, um videogame sobre os jogos olímpicos

Pós-graduação em Desenvolvimento Humano e Tecnologias - IBRC

Assessing the replacement of lead in solders: effects on resource use and human health

Human health and environmental concerns are not usually considered at the same time. Tin-lead solders are still widely used in several countries, including Brazil, by manufacturers of electronic assemblies. One of the options to reduce or eliminate lead from the manufacturing environment is its replacement with lead-free alloys. This paper applies emergy synthesis and the DALY indicator (Disability Adjusted Life Years) to assess the impact of manufacturing soft solder using tin, lead and other metals on the environment and on human health. The results are presented together with the company's financial results and the results calculated from the Brazilian statistical value of life. The calculation of emergy per unit showed that more resources are used to produce one ton of lead-free solders than to produce one ton of tin-lead solders, with and without the use of consumer waste recovered through a reverse logistics system. The assessment of air emissions during solder production shows that the benefits of the lead-free solution are limited to the stages of manufacturing and assembling. The tin-lead solder appears as the best option in terms of resource use efficiency and with respect to emissions into the atmosphere when the mining stage is included. A discussion on the influence of the system's boundaries on the decision-making process for materials substitution is presented. (C) 2012 Elsevier Ltd. All rights reserved.

Oportunidades de melhorias no gerenciamento de resíduos sólidos em uma indústria de plásticos: um estudo de caso

Pós-graduação em Engenharia de Produção - FEB

Crescimento e desenvolvimento econômico de Cingapura após a independência

This paper analyzes the growth and development of Singapore after its independence. For this, we made a historical analysis of the country, attributing importance in their geographic, economic, demographic, cultural and social. Singapore does not have a representative agricultural sector; its economy is based on manufacturing and the financial sector. The development of such activities was through strong planning policies and stringent regulatory institutions. Singapore economy has evolved from a trading post to a major financial center worldwide. Shows high rates of GDP per capita, which is $ 50,000 in 2011. This country has the world's busiest port for container handling. Thus, industries are based on activities with high added value and attraction of foreign companies was due to the stability of the country, which helped the growth of it

Contaminação do lençol freático por hidrocarbonetos na região de Avaré - SP

Pós-graduação em Engenharia Civil e Ambiental - FEB

Dinâmica territorial do conhecimento e da inovação: uma análise da Incubadora Tecnológica de São Carlos (SP)

Pós-graduação em Geografia - IGCE

Há sinergia entre o sistema lean manufacturing e a gestão ambiental? mapeando o estado da arte

In recent decades, two research themes have been prominent in the academic and organizational setting: lean manufacturing and green management. Since 1996, when Florida (1996) wrote an article focusing on the synergy between these two areas, the debate if “Lean is Green?” enters in the academic field. It is in this context that this research presents the results of a systematic literature on the topic, focusing on the characteristics, positive and negative impacts, lean paradigms, green paradigms and design of supply chains. To perform this procedure it were followed the methodological footsteps of Lage Junior and Godinho Filho (2010). The research occurred in the database Scopus and it was conducted from June, 2012 to July, 2012.The key word used was “green lean” and as search filter it were included only articles and conference Papers. Their main result is a deep analysis of the accumulated knowledge on the subject, where it is revealed that the majority of studies point to the synergy between some components of the lean manufacturing system in relation to environmental management. The research gap found is related to articles that address the entropy of the union of lean and green systems.

Delimitação, intensidade e especialização de áreas comerciais: uma proposição para o estudo das áreas centrais em cidades médias a partir da análise dos Índices de Densidade Informacional para os casos de Presidente Prudente - SP e Ribeirão Preto - SP

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The Role of CEO Statements of Aggressiveness and the Competitive Aggressiveness of Firms: What is the Impact on Performance?

This research examines the impact of a CEO’s statements of aggressiveness on his or her organization’s competitive moves and subsequent performance. Hypotheses were developed based on previous work in Upper Echelon Theory and competitive dynamics. Based on this prior literature, it was hypothesized aggressive statements by CEOs will be associated with more aggressive organizations. It was also hypothesized these more aggressive organizations would display better performance than less aggressive organizations. A content analysis of letters to shareholders and trade publications was performed. This data was analyzed using multiple regression in SPSS 17 to test the hypotheses that aggressive statements by CEOs are associated with aggressive organizations and higher performance. Aggression scores for the content analysis were generated using the software package DICTION. The sample for the study was the organizations with the most revenue in two industries, automobile manufacturing and retailing. Data collection covered a five-year time span from 2003-2007, with performance data lagged one year. Control variables employed included CEO tenure, CEO background, organization size, and organization age. The findings indicate that CEO statements of aggressiveness do not significantly impact the competitive aggressiveness or the performance of their organizations. The implications of these findings are discussed and potential avenues for future research in the area are outlined.

Delimitação, intensidade e especialização de áreas comerciais: uma proposição para o estudo das áreas centrais em cidades médias a partir da análise dos Índices de Densidade Informacional para os casos de Presidente Prudente - SP e Ribeirão Preto - SP

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

SOCIAL POLICY AS REGIONAL POLICY: MARKET AND NONMARKET FACTORS DETERMINING REGIONAL INEQUALITY

We decompose the recent changes in regional inequality in Brazil into its components, highlighting the role of spatially blind social programs. We aggregate personal income micro data to the state level, differentiating nine income sources, and assess the role of these components in the observed changes in regional inequality indicators. The main results indicate that the largest part of the recent reduction in regional inequality is related to the dynamics of the market-related labor income, with manufacturing and services favoring deconcentration. Labor income in agriculture, retirement and pensions, and property rents and other sources favored concentration. The social programs Bolsa Familia and Beneficios de Prestacao Continuada are responsible for more than 24 percent of the reduction in inequality, although they account for less than 1.7 percent of the disposable household income. Such positive impact on regional concentration is impressive, since the goals of the programs are clearly nonspatial.

Computational and experimental characterization of a low-cost piezoelectric valveless diaphragm pump

Flow pumps act as important devices in areas such as Bioengineering, Medicine, and Pharmacy, among other areas of Engineering, mainly for delivering liquids or gases at small-scale and precision flow rate quantities. Principles for pumping fluids based on piezoelectric actuators have been widely studied, since they allow the construction of pump systems for displacement of small fluid volumes with low power consumption. This work studies valveless piezoelectric diaphragm pumps for flow generation, which uses a piezoelectric ceramic (PZT) as actuator to move a membrane (diaphragm) up and down as a piston. The direction of the flow is guaranteed by valveless configuration based on a nozzle-diffuser system that privileges the flow in just one pumping direction. Most research efforts on development of valveless flow pump deal either with computational simulations based on simplified models or with simplified physical approaches based on analytical models. The main objective of this work is the study of a methodology to develop a low-cost valveless piezoelectric diaphragm flow pump using computational simulations, parametric study, prototype manufacturing, and experimental characterization. The parametric study has shown that the eccentricity of PZT layer and metal layer plays a key role in the performance of the pump.

Essays on Wage and Price Formation in Sweden

Study IReal Wage Determination in the Swedish Engineering Industry This study uses the monopoly union model to examine the determination of real wages and in particular the effects of active labour market programmes (ALMPs) on real wages in the engineering industry. Quarterly data for the period 1970:1 to 1996:4 are used in a cointegration framework, utilising the Johansen's maximum likelihood procedure. On a basis of the Johansen (trace) test results, vector error correction (VEC) models are created in order to model the determination of real wages in the engineering industry. The estimation results support the presence of a long-run wage-raising effect to rises in the labour productivity, in the tax wedge, in the alternative real consumer wage and in real UI benefits. The estimation results also support the presence of a long-run wage-raising effect due to positive changes in the participation rates regarding ALMPs, relief jobs and labour market training. This could be interpreted as meaning that the possibility of being a participant in an ALMP increases the utility for workers of not being employed in the industry, which in turn could increase real wages in the industry in the long run. Finally, the estimation results show evidence of a long-run wage-reducing effect due to positive changes in the unemployment rate. Study IIIntersectoral Wage Linkages in Sweden The purpose of this study is to investigate whether the wage-setting in certain sectors of the Swedish economy affects the wage-setting in other sectors. The theoretical background is the Scandinavian model of inflation, which states that the wage-setting in the sectors exposed to international competition affects the wage-setting in the sheltered sectors of the economy. The Johansen maximum likelihood cointegration approach is applied to quarterly data on Swedish sector wages for the period 1980:1–2002:2. Different vector error correction (VEC) models are created, based on assumptions as to which sectors are exposed to international competition and which are not. The adaptability of wages between sectors is then tested by imposing restrictions on the estimated VEC models. Finally, Granger causality tests are performed in the different restricted/unrestricted VEC models to test for sector wage leadership. The empirical results indicate considerable adaptability in wages as between manufacturing, construction, the wholesale and retail trade, the central government sector and the municipalities and county councils sector. This is consistent with the assumptions of the Scandinavian model. Further, the empirical results indicate a low level of adaptability in wages as between the financial sector and manufacturing, and between the financial sector and the two public sectors. The Granger causality tests provide strong evidence for the presence of intersectoral wage causality, but no evidence of a wage-leading role in line with the assumptions of the Scandinavian model for any of the sectors. Study IIIWage and Price Determination in the Private Sector in Sweden The purpose of this study is to analyse wage and price determination in the private sector in Sweden during the period 1980–2003. The theoretical background is a variant of the “Imperfect competition model of inflation”, which assumes imperfect competition in the labour and product markets. According to the model wages and prices are determined as a result of a “battle of mark-ups” between trade unions and firms. The Johansen maximum likelihood cointegration approach is applied to quarterly Swedish data on consumer prices, import prices, private-sector nominal wages, private-sector labour productivity and the total unemployment rate for the period 1980:1–2003:3. The chosen cointegration rank of the estimated vector error correction (VEC) model is two. Thus, two cointegration relations are assumed: one for private-sector nominal wage determination and one for consumer price determination. The estimation results indicate that an increase of consumer prices by one per cent lifts private-sector nominal wages by 0.8 per cent. Furthermore, an increase of private-sector nominal wages by one per cent increases consumer prices by one per cent. An increase of one percentage point in the total unemployment rate reduces private-sector nominal wages by about 4.5 per cent. The long-run effects of private-sector labour productivity and import prices on consumer prices are about –1.2 and 0.3 per cent, respectively. The Rehnberg agreement during 1991–92 and the monetary policy shift in 1993 affected the determination of private-sector nominal wages, private-sector labour productivity, import prices and the total unemployment rate. The “offensive” devaluation of the Swedish krona by 16 per cent in 1982:4, and the start of a floating Swedish krona and the substantial depreciation of the krona at this time affected the determination of import prices.

Diseño de una infraestructura TIC basada en virtualización

[ES] Las necesidades básicas de las empresas suelen ser las mismas, ya sea una empresa grande que pequeña, la infraestructura sobre la que montan sus procesos de negocio y las aplicaciones para gestionarlos suelen ser casi iguales. Si dividimos la infraestructura TIC de una empresa en hardware, sistema y aplicaciones, podemos ver que en la mayoría de ellas el sistema es casi idéntico. Además, gracias a la virtualización, que ha entrado de manera arrolladora en el mundo de la informática, podemos independizar totalmente el software del hardware, de forma que obtenemos una flexibilidad enorme a la hora de planificar despliegues de infraestructura. Sobre estas dos ideas, uniformidad de sistema e independencia de hardware, son sobre las que se va a desarrollar el siguiente TFG. Para el desarrollo de la primera de ellas se realizará el estudio de la infraestructura básica ( sistema) que cualquier empresa suele tener. Se intentará dar una solución que sea válida para una gran cantidad de empresas de nuestro entorno y se realizará el diseño del mismo. Con la segunda idea desarrollaremos un sistema basado en servicios, que sea lo suficientemente completa para poder dar respuesta a las necesidades vistas pero, a su vez, suficientemente flexible para que el crecimiento en capacidades o servicios se pueda realizar de forma sencilla sin que la estructura del sistema, o sus módulos deban modificarse para realizarlos. Por tanto, vamos a realizar un diseño integral y completa, de forma que será tanto de hardware como de software, haciendo énfasis en la integración de los sistemas y la interrelación entre los distintos elementos de ellos. Se dará, a su vez, la valoración económica del mismo. Por último, y como ejemplo de la flexibilidad del diseño elegido veremos dos modificaciones sobre el diseño original. El primero de ellos será una ampliación para dar mayor seguridad en cuanto a redundancia de almacenamiento y, ya en un paso definitivo, montar un CPD remoto. El segundo de ellos será un diseño de bajo coste, en el que, mantenimiento los mismos servicios, bajaremos el coste del diseño con productos con algo menos de prestaciones, pero manteniendo la solución en conjunto unos altos niveles de calidad y servicio.