Load and Season Adapted Solar Collectors

In Sweden solar irradiation and space heating loads are unevenly distributed over the year. Domestic hot water loads may be nearly constant. Test results on solar collector performance are often reported as yearly output of a certain collector at fixed temperatures, e g 25, 50 and 75 C. These data are not suitable for dimensioning of solar systems, because the actual performance of the collector depends heavily on solar fraction and load distribution over the year.At higher latitudes it is difficult to attain high solar fractions for buildings, due to overheating in summer and small marginal output for added collector area. Solar collectors with internal reflectors offer possibilities to evade overheating problems and deliver more energy at seasons when the load is higher. There are methods for estimating the yearly angular irradiation distribution, but there is a lack of methods for describing the load and the storage in such a way as to enable optical design of season and load adapted collectors.This report describes two methods for estimation of solar system performance with relevance for season and load adaption. Results regarding attainable solar fractions as a function of collector features, load profiles, load levels and storage characteristics are reported. The first method uses monthly collector output data at fixed temperatures from the simulation program MINSUN for estimating solar fractions for different load profiles and load levels. The load level is defined as estimated yearly collector output at constant collector temperature divided be yearly load. This table may examplify the results:CollectorLoadLoadSolar Improvementtypeprofile levelfractionover flat plateFlat plateDHW 75 %59 %Load adaptedDHW 75 %66 %12 %Flat plateSpace heating 50 %22 %Load adaptedSpace heating 50 %28 %29 %The second method utilises simulations with one-hour timesteps for collectors connected to a simplified storage and a variable load. Collector output, optical and thermal losses, heat overproduction, load level and storage temperature are presented as functions of solar incidence angles. These data are suitable for optical design of load adapted solar collectors. Results for a Stockholm location indicate that a solar combisystem with a solar fraction around 30 % should have collectors that reduce heat production at solar heights above 30 degrees and have optimum efficiency for solar heights between 8 and 30 degrees.

Load Adapted Solar Thermal Combisystems - Optical Analysis and Systems Optimization

In a northern European climate a typical solar combisystem for a single family house normally saves between 10 and 30 % of the auxiliary energy needed for space heating and domestic water heating. It is considered uneconomical to dimension systems for higher energy savings. Overheating problems may also occur. One way of avoiding these problems is to use a collector that is designed so that it has a low optical efficiency in summer, when the solar elevation is high and the load is small, and a high optical efficiency in early spring and late fall when the solar elevation is low and the load is large.The study investigates the possibilities to design the system and, in particular, the collector optics, in order to match the system performance with the yearly variations of the heating load and the solar irradiation. It seems possible to design practically viable load adapted collectors, and to use them for whole roofs ( 40 m2) without causing more overheating stress on the system than with a standard 10 m2 system. The load adapted collectors collect roughly as much energy per unit area as flat plate collectors, but they may be produced at a lower cost due to lower material costs. There is an additional potential for a cost reduction since it is possible to design the load adapted collector for low stagnation temperatures making it possible to use less expensive materials. One and the same collector design is suitable for a wide range of system sizes and roof inclinations. The report contains descriptions of optimized collector designs, properties of realistic collectors, and results of calculations of system output, stagnation performance and cost performance. Appropriate computer tools for optical analysis, optimization of collectors in systems and a very fast simulation model have been developed.

Solvärmesystem för hög täckningsgrad - Load adapted concentrating collectors for high solar fractions

Dagens kombisolvärmesystem för enfamiljshus har i storleksordningen 10 m2 solfångare och kan täcka i runda tal 10 ? 30 % av det årliga värmebehovet. Ökar man solfångarytan för att öka solvärmetäckningsgraden uppstår det vanligtvis en överproduktion av värme sommartid viket kan orsaka problem i form av termisk utmattning av material, att material förstörs eller att säkerhetsventiler utlöses med driftsstopp som följd. Vidare förkortas glykolens livslängd radikalt och detta kan ge följdskador såsom korrosion, beläggningar i rören och t o m igensättning av systemet. Ett sätt att undvika problemen med överhettning i solvärmesystem med hög täckningsgrad är att använda lastanpassade solfångare. Med detta menas solfångare som har en verkningsgrad som är beroende av solhöjden och varierar över året. Verkningsgraden är hög när värmelasten är hög (vanligtvis sen höst, vinter och tidig vår) medan verkningsgraden är låg då värmelasten är låg (vanligtvis sen vår, sommar och tidig höst). I denna rapport visas att det är möjligt att bygga lastanpassade solfångarsystem med hög täckningsgrad för enfamiljshus med solfångarytor som täcker hela villatak (>= 40 m2), utan att den termiska påfrestningen på systemet blir större än för vanliga solvärmesystem med 10 m2 plana solfångare. Detta kan göras med samma systemkomponenter som finns i system med plana solfångare. De lastanpassade solfångarna levererar ungefär samma energimängd per m2 som plana solfångare, men de bör kunna bli billigare, på grund av lägre materialkostnad. Det finns även en potential att konstruera lastanpassade solvärmesystem med begränsad stagnationstemperatur, vilket kan möjliggöra användandet av billigare material. En och samma solfångartyp är lämplig för såväl stora som små system och för olika takvinklar. I rapporten redovisas optimerade solfångargeometrier för lastanpassade solvärmesystem, geometrier och optiska egenskaper för praktiskt möjliga solfångare samt beräkningar av förväntat årsutbyte, stagnationstemperaturer, stagnationstider och kostnader. Testresultat för två prototyper av lastanpassade solfångare presenteras. Optimeringsalgoritmer för design av optiken för lastanpassade solfångare i system samt ett ray-tracingverktyg och snabba men ändå tillräckligt noggranna simuleringsverktyg har utvecklats.

Allocation of authority in franchise chains

This article investigates the level of delegation in franchise chains, distinguishing the two most relevant franchising models: Business Format Franchising and Learning Network Franchising. The two models basically differ on the level of real authority (effective control over decisions) exercised by the franchisors. Differences in business features, such as the required standardization, monitoring costs and consumer sensitivity to variations in product attributes (consumer measurement costs), explain the adoption of the different models of franchising. These variables affect the trade-off between the risk of brand name loss and the gains in knowledge sharing and learning within the network. The higher the need for standardization, the higher is the risk of brand name loss, and, consequently, the more likely the franchisor will adopt an organizational design that confers more control over franchisees’ decisions, such as business format franchising. This paper presents two case studies with Brazilian food franchise chains that illustrate the main argument and suggest additional propositions. Moreover, an empirical analysis of 223 franchise chains provides additional support to the hypothesis of a negative the effect of required standardization on the level of delegation.

Forecasting electricity load demand: analysis of the 2001 rationing period in Brazil

This paper studies the electricity load demand behavior during the 2001 rationing period, which was implemented because of the Brazilian energetic crisis. The hourly data refers to a utility situated in the southeast of the country. We use the model proposed by Soares and Souza (2003), making use of generalized long memory to model the seasonal behavior of the load. The rationing period is shown to have imposed a structural break in the series, decreasing the load at about 20%. Even so, the forecast accuracy is decreased only marginally, and the forecasts rapidly readapt to the new situation. The forecast errors from this model also permit verifying the public response to pieces of information released regarding the crisis.

Creating buyer-supplier commitment in food supply chains at the base of the pyramid

Esta pesquisa analisa o papel dos aspectos relacionais tais como confiança, comprometimento, interdependência e uso de poder âmbito das estratégias de negócios inclusivos que envolvem pequenos agricultores nas cadeias de valor de multinacionais dos agronegócios no Brasil. Os negócios inclusivos de abastecimento direto por empresas com pequenos agricultores em países em desenvolvimento têm sido reconhecidos como uma abordagem economicamente viavél e promissora para criar impacto social e melhorar as condições de vida de produtores rurais da "base da pirâmide", ao mesmo tempo permitindo que as empresas reforçar as suas posições nos mercados locais e adquirir matérias primas de qualidade a custos mais baixos. Estudos sobre este tema focam amplamente sobre as vantagens comerciais e competitivas que as empresas derivam do abastecimento direito com pequenos fornecedores, apresentando modelos de cadeia de valor customizados e ajustados estratégias globais de negócios, no entanto ainda há pouco conhecimento teoricamente fundamentado sobre os desafios organizacionais e relacionais da relação entre o comprador multinacional e o fornecedor de baixa renda. Além disso, pouco foco tem-se prestado sobre como assimetrias entre multinacionais e produtores de baixa renda, em questão de poder, dependência e de valores pode afetar a evolução dessas relações de negócios. O objetivo do estudo foi descrever os fatores que permitem a esses parceiros assimétricos de construir relacionamentos comerciais de longo prazo e mutuamente benéficos. A metodologia da teoria fundamentada foi usada e foi particularmente adequada para examinar as relações entre comprador e fornecedor e para recolher experiências de campo em três setores principais dominados pela agricultura familiar no Brasil, ou seja laticínios, avi-suinocultura e produção hortícola. Os principais conceitos teóricos da área de Relationship Marketing foram usados para apoiar os resultados da pesquisa de campo. A principal conclusão desta pesquisa é a importância de ir além da construção de confiança na estratégia de gestão do relacionamento entre comprador e fornecedor e de criar parcerias diádicas baseadas na interdependência mútua, a fim de reduzir as assimetrias e melhorar o comprometimento entre a empresa e o pequeno agricultor.

Supply chain turbulence: the impact of a mid-range event in multi-tier, multi-dimension supply chains

Nota: A autora agradece à Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) pela concessão de bolsa de estudos para o desenvolvimento deste projeto de pesquisa.

The manufacturing industry in Brazil in the era of global value chains

This article presents a comprehensive and detailed overview of the international trade performance of the manufacturing industry in Brazil over the last decades, emphasizing its participation in Global Value Chains. It uses information from recent available global inputoutput tables such as WIOD (World Input-output database) and TIVA (Trade in Value Added, OECD) as well as complementary information from the GTAP 8 (Global Trade Analysis Project) database. The calculation of a broad set of value added type indicators allows a precise contextualization of the ongoing structural changes in the Brazilian industry, highlighting the relative isolation of its manufacturing sector from the most relevant international supply chains. This article also proposes a public policy discussion, presenting two case studies: the first one related to trade facilitation and the second one to preferential trade agreements. The main conclusions are twofold: first, the reduction of time delays at customs in Brazil may significantly improve the trade performance of its manufacturing industry, specially for the more capital intensive sectors which are generally the ones with greater potential to connection to global value chains; second, the extension of the concept of a “preferential trade partner” to the context of the global unbundling of production may pave the way to future trade policy in Brazil, particularly in the mapping of those partners whose bilateral trade relations with Brazil should receive greater priority by policy makers.

Citizens and the future of multilateralism in a polycentric world at 2030: the perspectives of emerging countries for the trading system: the impasse of WTO, the trends of mega agreements, the logic of value chains and the advent of consumers concerns on international trade

A new paradigm is modeling the World: evolutionary innovations in all fronts, new information technologies, huge mobility of capital, use of risky financial tools, globalization of production, new emerging powers and the impact of consumer concerns on governmental policies. These phenomena are shaping the World and forcing the advent of a new World Order in the Multilateral Monetary, Financial, and Trading System. The effects of this new paradigm are also transforming global governance. The political and economic orders established after the World War and centered on the multilateral model of UN, IMF, World Bank, and the GATT, leaded by the developed countries, are facing significant challenges. The rise of China and emerging countries shifted the old model to a polycentric World, where the governance of these organizations are threatened by emerging countries demanding a bigger participation in the role and decision boards of these international bodies. As a consequence, multilateralism is being confronted by polycentrism. Negotiations for a more representative voting process and the pressure for new rules to cope with the new demands are paralyzing important decisions. This scenario is affecting seriously not only the Monetary and Financial Systems but also the Multilateral Trading System. International trade is facing some significant challenges: a serious deadlock to conclude the last round of the multilateral negotiation at the WTO, the fragmentation of trade rules by the multiplication of preferential and mega agreements, the arrival of a new model of global production and trade leaded by global value chains that is threatening the old trade order, and the imposition of new sets of regulations by private bodies commanded by transnationals to support global value chains and non-governmental organizations to reflect the concerns of consumers in the North based on their precautionary attitude about sustainability of products made in the World. The lack of any multilateral order in this new regulation is creating a big cacophony of rules and developing a new regulatory war of the Global North against the Global South. The objective of this paper is to explore how these challenges are affecting the Tradinge System and how it can evolve to manage these new trends.

The manufacturing industry in Brazil in the era of global value chains

This article presents a comprehensive and detailed overview of the international trade performance of the manufacturing industry in Brazil over the last decades, emphasizing its participation in Global Value Chains. It uses information from recent available global inputoutput tables such as WIOD (World Input-output database) and TIVA (Trade in Value Added, OECD) as well as complementary information from the GTAP 8 (Global Trade Analysis Project) database. The calculation of a broad set of value added type indicators allows a precise contextualization of the ongoing structural changes in the Brazilian industry, highlighting the relative isolation of its manufacturing sector from the most relevant international supply chains. This article also proposes a public policy discussion, presenting two case studies: the first one related to trade facilitation and the second one to preferential trade agreements. The main conclusions are twofold: first, the reduction of time delays at customs in Brazil may significantly improve the trade performance of its manufacturing industry, specially for the more capital intensive sectors which are generally the ones with greater potential to connection to global value chains; second, the extension of the concept of a “preferential trade partner” to the context of the global unbundling of production may pave the way to future trade policy in Brazil, particularly in the mapping of those partners whose bilateral trade relations with Brazil should receive greater priority by policy makers

Natural disasters and their impacts on supply chains

This research aimed to understand how Brazilian organizations, located in areas affected by natural disasters were impacted in their operations and the impacts to their whole supply chain. Based on documentary analysis, the study identified the major events that happened in Brazil between 2003 and 2012 and the most affected supply chains, as well as key players during the disaster and the greatest impacts on economic activities. The results suggest that natural disasters are still not considered in the risk management by companies, despite the effects on their activities