Cissampelos sympodialis Eichl (Menispermaceae) leaf extract induces interleukin-10-dependent inhibition of Trypanosoma cruzi killing by macrophages

The aqueous fraction of the ethanolic extract (AFL) of Cissampelos sympodialis Eichl (Menispermaceae), popularly known as milona, has been shown to have both immunosuppressive and anti-inflammatory effects. In the present study we investigated the modulation of macrophage antimicrobicidal activity by in vitro treatment with the extract from C. sympodialis. Normal and thioglycolate-elicited mouse peritoneal macrophages were infected in vitro with the protozoan Trypanosoma cruzi DM28c clone. We observed that the AFL (used at doses ranging from 13 to 100 µg/ml) increased T. cruzi growth and induced a 75% reduction in nitric oxide production. This inhibition could be mediated by the stimulation of macrophage interleukin-10 (IL-10) secretion since the in vitro treatment with the AFL stimulated IL-10 production by T. cruzi-infected macrophages. These results suggest that the anti-inflammatory effect of the AFL from C. sympodialis could be, at least in part, mediated by the inhibition of macrophage functions and that the inhibition of macrophage microbicidal activity induced by the C. sympodialis extract may be mediated by the decrease in macrophage function mediated by interleukin-10 production.

Inotropic effect of Citrus sinensis (L.) Osbeck leaf extracts on the guinea pig atrium

The objective of the present investigation was to determine the contractile effect of crude and acetone leaf extracts of Citrus sinensis (L.) Osb. on mammalian myocardium. Crude leaf extracts have been used in folk medicine to treat neurological disorders. Some flavonoids isolated from this plant presented a positive inotropic effect on myocardium. This motivated us to test the extracts on the atria of guinea pigs of both sexes (300-500 g) and surprisingly we observed inotropic depression instead of an increase in force. The maximum effect of the crude extract was 79.4 ± 8.1% of the control force amplitude (N = 5 hearts, 10 trials, 27 ± 0.1ºC, stimulus: 2 Hz, 400 V, 0.5 ms). The EC50 for crude, ethanol, acetic, aqueous, and acetone extracts was 300, 300, 600, 1000, and 140 µg/ml, respectively, with a Hill constant of 1.8, 2.0, 2.5, 2.0, and 1.4, respectively. Blockade of cholinergic, beta-adrenergic, or opioid membrane receptors with 1.5 µM atropine sulfate, 1 µM propranolol, and 10 µM naloxone, respectively, did not change the effect of the crude extract. The acetone extract abolished the Bowditch positive staircase phenomenon (N = 5 hearts, 10 trials, 27 ± 0.1ºC), suggesting a possible reduction of the calcium inward current, and also promoted the so-called Woodworth phenomenon. The effect was concentration-dependent and indicated the existence of another inhibitory contractile mechanism such as the simultaneous activation of some of the membrane potassium channels reducing the myocardial action potential duration and further decreasing the cellular calcium entry.

Ginkgo biloba leaf extract (EGb 761) enhances catalepsy induced by haloperidol and L-nitroarginine in mice

Ginkgo biloba extract EGb 761 has been reported to have therapeutic effects which have been attributed to anti-oxidant and free radical-scavenging activities, including a direct action on nitric oxide production. L G-nitro-arginine (L-NOARG), a nitric oxide synthase inhibitor, and haloperidol, a drug that blocks dopamine receptors, are both known to induce catalepsy in rodents. Nitric oxide has been shown to influence dopaminergic transmission in the striatum. The purpose of the present study was to evaluate the effect of the extract obtained from leaves of Ginkgo biloba tree EGb 761 on catalepsy induced by haloperidol or by L-NOARG. Albino Swiss mice (35-45 g, N = 8-12) received by gavage a single or repeated oral dose (twice a day for 4 days) of EGb 761 followed by ip injection of haloperidol or L-NOARG. After the treatments, the animals were submitted to behavioral evaluation using the catalepsy test. Acute treatment with 80 mg/kg EGb did not modify the catalepsy induced by L-NOARG but, the dose of 40 mg/kg significantly enhanced haloperidol-induced catalepsy measured at the 10th min of the test. After repeated treatment with 80 mg/kg EGb 761, a significant increase in the cataleptic effect produced by both haloperidol and L-NOARG was observed. These data show that repeated EGb 761 administration increases the effects of drugs that modify motor behavior in mice. Since the catalepsy test has predictive value regarding extrapyramidal effects, the possibility of pharmacological interactions between haloperidol and Ginkgo biloba extracts should be further investigated in clinical studies.

Cytotoxicity of Marchantia convoluta leaf extracts to human liver and lung cancer cells

The cytotoxicity of three extracts (petroleum ether, ethyl acetate and n-butanol) from a plant used in folk medicine, Marchantia convoluta, to human non-small cell lung carcinoma (H1299) and liver carcinoma (HepG2) cell lines was tested. After 72-h incubation of lung and liver cancer cell cultures with varying concentrations of extracts (15 to 200 µg/mL), cytotoxicity was determined by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay and reported in terms of cell viability. The extracts that showed a significant cytotoxicity were subjected to gas chromatography-mass spectrometry analysis to identify the components. The ethyl acetate, but not the petroleum ether or n-butanol extract, had a significant cytotoxicity against lung and liver carcinoma cells with IC50 values of 100 and 30 µg/mL, respectively. A high concentration of ethyl acetate extract (100 µg/mL) rapidly reduced the number of H1299 cells. At lower concentrations of ethyl acetate extract (15, 30, and 40 µg/mL), the numbers of HepG2 cells started to decrease markedly. Gas chromatography-mass spectrometry analysis of the ethyl acetate extract revealed the presence of several compounds such as phytol (23.42%), 1,2,4-tripropylbenzene (13.09%), 9-cedranone (12.75%), ledene oxide (7.22%), caryophyllene (1.82%), and caryophyllene oxide (1.15%). HPLC analysis result showed that there were no flavonoids in ethyl acetate extract, but flavonoids are abundant in n-butanol extract. Further studies are needed regarding the identification, toxicity, and mechanism of action of active compounds.

Modelling Cutting States in Rough Turning of 34CrNiMo6 Steel

Rough turning is an important form of manufacturing cylinder-symmetric parts. Thus far, increasing the level of automation in rough turning has included process monitoring methods or adaptive turning control methods that aim to keep the process conditions constant. However, in order to improve process safety, quality and efficiency, an adaptive turning control should be transformed into an intelligent machining system optimizing cutting values to match process conditions or to actively seek to improve process conditions. In this study, primary and secondary chatter and chip formation are studied to understand how to measure the effect of these phenomena to the process conditions and how to avoid undesired cutting conditions. The concept of cutting state is used to address the combination of these phenomena and the current use of the power capacity of the lathe. The measures to the phenomena are not developed based on physical measures, but instead, the severity of the measures is modelled against expert opinion. Based on the concept of cutting state, an expert system style fuzzy control system capable of optimizing the cutting process was created. Important aspects of the system include the capability to adapt to several cutting phenomena appearing at once, even if the said phenomena would potentially require conflicting control action.

Antinociceptive effects of the essential oil of Mentha x villosa leaf and its major constituent piperitenone oxide in mice

Mentha x villosa Huds (Labiatae) is an aromatic herb widely used in folk medicine. Since the essential oil of the herb has many pharmacological activities, including antispasmodic effects, we determined whether the oil and its major constituent, piperitenone oxide (PO), have antinociceptive activity. The essential oil of M. x villosa (EOMV) and PO administered orally at 200 mg/kg (vehicle: 0.1% Tween 80 in water) significantly reduced the writhings induced by acetic acid from control values of 59.5 ± 3.1 s (N = 10) to 31.9 ± 2.8 s (N = 10) and 23.8 ± 3.4 s (N = 10), respectively. When administered at 100 and 200 mg/kg, EOMV reduced the paw licking time for the second phase of the formalin test from the control value of 20.6 ± 2.1 s (N = 13) to 5.3 ± 2.2 s (N = 12) and 2.7 ± 1.2 s (N = 18), respectively. At 100 and 200 mg/kg, PO reduced this second phase to 8.3 ± 2.7 s (N = 12) and 3.0 ± 1.2 s (N = 10), respectively. This effect of EOMV and PO was not reversed by naloxone. EOMV and PO had no significant effect on the first phase of the formalin test. As evaluated by the hot-plate and tail immersion test, EOMV and PO, at doses up to 200 mg/kg, showed no analgesic activity. These results show that EOMV and PO have antinociceptive activity and suggest that this effect is probably an indirect anti-inflammatory effect, which does not involve the central nervous system.

Nutrients in the cassava (Manihot esculenta Crantz) leaf meal at three ages of the plant

The high number of cassava cultivars adapted to many different regions provides a wide variation in the chemical composition of cassava leaves meal (CLM). Therefore, the contents of some nutrients in CLM from five cultivars at three ages of the plant were investigated in order to select the cultivars and ages with superior levels of these nutrients. When the plants were 12 months old, the highest levels of crude protein (CP), beta-carotene, iron, magnesium, phosphorus and sulfur were observed. The IAC 289-70 cv. showed the highest levels of magnesium, as well as considerable contents of CP, beta-carotene, iron, zinc and sulfur, which did not differ statistically from the cultivars showing the highest levels of these nutrients.

Antinutrients in the cassava (Manihot esculenta Crantz) leaf powder at three ages of the plant

In Brazil, the cassava leaf meal (CLM) has been used to strive against undernourishment because it is a high source of vitamins and minerals. However, the wide variation in the chemical composition of the different cultivars, as well as their antinutritional substances may be a restriction to their uses. The levels of some antinutrients in CLM from five cultivars at three ages of the plant (TAP) were investigated, in order to select the cultivars and plant ages that would be more appropriate for human consumption. The lowest contents of antinutrients were observed in the 12-month old plants, except for nitrate and hemagglutinin from which the lowest contents were found for the 17 month old ones. The cultivar IAC 289-70 had the lowest antinutrient levels, except for saponin and oxalate. Thus, the cultivar IAC 289-70 at 12 months is the most appropriate for human consumption.

Feasibility of industrial implementation of laser cutting into paper making machine

Laser cutting implementation possibilities into paper making machine was studied as the main objective of the work. Laser cutting technology application was considered as a replacement tool for conventional cutting methods used in paper making machines for longitudinal cutting such as edge trimming at different paper making process and tambour roll slitting. Laser cutting of paper was tested in 70’s for the first time. Since then, laser cutting and processing has been applied for paper materials with different level of success in industry. Laser cutting can be employed for longitudinal cutting of paper web in machine direction. The most common conventional cutting methods include water jet cutting and rotating slitting blades applied in paper making machines. Cutting with CO2 laser fulfils basic requirements for cutting quality, applicability to material and cutting speeds in all locations where longitudinal cutting is needed. Literature review provided description of advantages, disadvantages and challenges of laser technology when it was applied for cutting of paper material with particular attention to cutting of moving paper web. Based on studied laser cutting capabilities and problem definition of conventional cutting technologies, preliminary selection of the most promising application area was carried out. Laser cutting (trimming) of paper web edges in wet end was estimated to be the most promising area where it can be implemented. This assumption was made on the basis of rate of web breaks occurrence. It was found that up to 64 % of total number of web breaks occurred in wet end, particularly in location of so called open draws where paper web was transferred unsupported by wire or felt. Distribution of web breaks in machine cross direction revealed that defects of paper web edge was the main reason of tearing initiation and consequent web break. The assumption was made that laser cutting was capable of improvement of laser cut edge tensile strength due to high cutting quality and sealing effect of the edge after laser cutting. Studies of laser ablation of cellulose supported this claim. Linear energy needed for cutting was calculated with regard to paper web properties in intended laser cutting location. Calculated linear cutting energy was verified with series of laser cutting. Practically obtained laser energy needed for cutting deviated from calculated values. This could be explained by difference in heat transfer via radiation in laser cutting and different absorption characteristics of dry and moist paper material. Laser cut samples (both dry and moist (dry matter content about 25-40%)) were tested for strength properties. It was shown that tensile strength and strain break of laser cut samples are similar to corresponding values of non-laser cut samples. Chosen method, however, did not address tensile strength of laser cut edge in particular. Thus, the assumption of improving strength properties with laser cutting was not fully proved. Laser cutting effect on possible pollution of mill broke (recycling of trimmed edge) was carried out. Laser cut samples (both dry and moist) were tested on the content of dirt particles. The tests revealed that accumulation of dust particles on the surface of moist samples can take place. This has to be taken into account to prevent contamination of pulp suspension when trim waste is recycled. Material loss due to evaporation during laser cutting and amount of solid residues after cutting were evaluated. Edge trimming with laser would result in 0.25 kg/h of solid residues and 2.5 kg/h of lost material due to evaporation. Schemes of laser cutting implementation and needed laser equipment were discussed. Generally, laser cutting system would require two laser sources (one laser source for each cutting zone), set of beam transfer and focusing optics and cutting heads. In order to increase reliability of system, it was suggested that each laser source would have double capacity. That would allow to perform cutting employing one laser source working at full capacity for both cutting zones. Laser technology is in required level at the moment and do not require additional development. Moreover, capacity of speed increase is high due to availability high power laser sources what can support the tendency of speed increase of paper making machines. Laser cutting system would require special roll to maintain cutting. The scheme of such roll was proposed as well as roll integration into paper making machine. Laser cutting can be done in location of central roll in press section, before so-called open draw where many web breaks occur, where it has potential to improve runability of a paper making machine. Economic performance of laser cutting was done as comparison of laser cutting system and water jet cutting working in the same conditions. It was revealed that laser cutting would still be about two times more expensive compared to water jet cutting. This is mainly due to high investment cost of laser equipment and poor energy efficiency of CO2 lasers. Another factor is that laser cutting causes material loss due to evaporation whereas water jet cutting almost does not cause material loss. Despite difficulties of laser cutting implementation in paper making machine, its implementation can be beneficial. The crucial role in that is possibility to improve cut edge strength properties and consequently reduce number of web breaks. Capacity of laser cutting to maintain cutting speeds which exceed current speeds of paper making machines what is another argument to consider laser cutting technology in design of new high speed paper making machines.

Use of Moringa oleífera Lamarck leaf extract as sugarcane juice clarifier: effects on clarifed juice and sugar

The objective of this study was to evaluate the effect of Moringa oleifera Lam. leaf extract on the sedimentation of impurities in the treatment of sugarcane juice and the effects on sugar quality and on the clarified juice. The experimental design used was a 4x2 factorial arrangement with four replications. The main treatments performed included the extracted original sugarcane juice, the synthetic polyelectrolyte (Flomex 9076), the leaf extract, and a control. The secondary treatments consisted of the sugarcane varieties RB92579 and RB867515. The clarification process used was simple defecation, in which the flocculating agents and the juice, limed and heated, were poured simultaneously into a decanter. The microbiological and chemico-technological characteristics of the extracted and clarified juices were evaluated. The clarified juice was concentrated up to 60° Brix (syrup) and subjected to boiling in a pilot pan using seeds to perform the graining: The sugar was recovered by centrifugation and analyzed for microbiological and chemico-technological characteristics. It was concluded that the use of the Moringa oleifera Lam. leaves extract resulted in a better quality of clarified juice and sugar.

Study on creation of an indocalamus leaf flavor

Abstract Flavors represent a small but significant segment of food industry. Sensory characteristics play an important role in the process of consumer acceptance and preference. Indocalamus leaf takes on a pleasant odor and indocalamus leaf flavor can be used in many products. However, indocalamus leaf flavor formula has not been reported. Therefore, developing an indocalamus leaf flavor is of significant interests. Note is a distinct flavor or odor characteristic. This paper concentrates on preparation and creation of indocalamus leaf flavor according to the notes of indocalamus leaf. The notes were obtained by smelling indocalamus leaf, and the results showed that the notes of indocalamus leaf flavor can be classified as: green-leafy note, sweet note, beany note, aldehydic note, waxy note, woody note, roast note, creamy note, and nutty note. According to the notes of indocalamus leaf odor, a typical indocalamus leaf flavor formula was obtained. The indocalamus leaf flavor blended is pleasant, harmonious, and has characteristics of indocalamus leaf odor.

Matériaux pour l'histoire positive et philosophique de l'homme : bulletin des travaux et découvertes concernant l'anthropologie, les temps anté-historiques, l'époque quaternaire, les questions de l'espèce et de la génération spontanée / par Gabriel de Mortillet

1865/09 (A2)-1866/08.

Matériaux pour l'histoire positive et philosophique de l'homme : bulletin des travaux et découvertes concernant l'anthropologie, les temps anté-historiques, l'époque quaternaire, les questions de l'espèce et de la génération spontanée / par Gabriel de Mortillet

1864/09 (A1)-1865/08.