Clutch-size adjustments and skew models: effects on reproductive partitioning and group stability

Reproductive skew theory seeks to integrate social and ecological factors thought to influence the division of reproduction among group-living animals. However, most reproductive skew models only examine interactions between individuals of the same sex. Here, we suggest that females can influence group stability and conflict among males by modifying their clutch size and may do so if they benefit from the presence of subordinate male helpers or from reduced conflict. We develop 3 models, based on concessions-based, restraint, and tug-of-war models, in which female clutch size is variable and ask when females will increase their clutch size above that which would be optimal in the absence of male-male conflict. In concessions-based and restraint models, females should increase clutch size above their optima if the benefits of staying for subordinate males are relatively low. Relatedness between males has no effect on clutch size. When females do increase clutch size, the division of reproduction between males is not influenced by relatedness and does not differ between restraint and concessions-based models. Both of these predictions are in sharp contrast to previous models. In tug-of-war models, clutch size is strongly influenced by relatedness between males, with the largest clutches, but the fewest surviving offspring, produced when males are unrelated. These 3 models demonstrate the importance of considering third-party interests in the decisions of group-living organisms.

DESIGN AND FABRICATION OF RESONANT GAS SENSOR FOR HIGH SENSITIVITY IN THE PRESENCE OF AIR DAMPING

Gas sensors have been used widely in different important area including industrial control, environmental monitoring, counter-terrorism and chemical production. Micro-fabrication offers a promising way to achieve sensitive and inexpensive gas sensors. Over the years, various MEMS gas sensors have been investigated and fabricated. One significant type of MEMS gas sensors is based on mass change detection and the integration with specific polymer. This dissertation aims to make contributions to the design and fabrication of MEMS resonant mass sensors with capacitance actuation and sensing that lead to improved sensitivity. To accomplish this goal, the research has several objectives: (1) Define an effective measure for evaluating the sensitivity of resonant mass devices; (2) Model the effects of air damping on microcantilevers and validate models using laser measurement system (3) Develop design guidelines for improving sensitivity in the presence of air damping; (4) Characterize the degree of uncertainty in performance arising from fabrication variation for one or more process sequences, and establish design guidelines for improved robustness. Work has been completed toward these objectives. An evaluation measure has been developed and compared to an RMS based measure. Analytic models of air damping for parallel plate that include holes are compared with a COMSOL model. The models have been used to identify cantilever design parameters that maximize sensitivity. Additional designs have been modeled with COMSOL and the development of an analytical model for Fixed-free cantilever geometries with holes has been developed. Two process flows have been implemented and compared. A number of cantilever designs have been fabricated and the uncertainty in process has been investigated. Variability from processing have been evaluated and characterized.

Microscopic wire guide-based orotracheal mouse intubation: description, evaluation and comparison with transillumination

Airway access is needed for a number of experimental animal models, and the majority of animal research is based on mouse models. Anatomical conditions in mice are small, and the narrow glottic opening allows intubation only with a subtle technique. We therefore developed a microscopic endotracheal intubation method with a wire guide technique in mice anaesthetized with halothane in oxygen. The mouse is hung perpendicularly with its incisors on a thread fixed on a vertical plate. The tongue is placed with a pair of forceps between the left hand's thumb and forefinger and slightly pulled, while the neck and thorax are positioned using the third and fourth fingers. By doing so, the neck can be slightly stretched, which allows optimal visualization of the larynx and the vocal cords. To ensure a safe intubation, a fine wire guide is placed under vision between the vocal cords and advanced about 5 mm into the trachea. An intravenous 22G x 1 in. plastic or Teflon catheter is guided over this wire. In a series of 41 mice, between 21 and 38 g, the success rate for the first intubation attempt was >95%. Certainty of the judgement procedure was 100% and success rate was higher using the described method when compared with a transillumination method in a further series. The technique is safe, less invasive than tracheostomy and suitable for controlled ventilation and pulmonary substance application.

POST-PROJECT ASSESSMENT OF PIT LATRINES IN RURAL PANAMA

In Panama, one of the Environmental Health (EH) Sector’s primary goals is to improve the health of rural Panamanians by helping them to adopt behaviors and practices that improve access to and use of sanitation systems. In complying with this goal, the EH sector has used participatory development models to improve hygiene and increase access to latrines through volunteer managed latrine construction projects. Unfortunately, there is little understanding of the long term sustainability of these interventions after the volunteers have completed their service. With the Peace Corps adapting their Monitoring, Reporting, and Evaluation procedures, it is appropriate to evaluate the sustainability of sanitation interventions offering recommendations for the adaptions of the EH training program, project management, and evaluation procedures. Recognizing the need for evaluation of past latrine projects, the author performed a post project assessment of 19 pit latrine projects using participatory analysis methodologies. First, the author reviewed volunteers’ perspectives of pit latrine projects in a survey. Then, for comparison, the author performed a survey of latrine projects using a benchmarking scoring system to rate solid waste management, drainage, latrine siting, latrine condition, and hygiene. It was observed that the Sanitation WASH matrix created by the author was an effective tool for evaluating the efficacy of sanitation interventions. Overall more than 75%, of latrines constructed were in use. However, there were some areas where improvements could be made for both latrine construction and health and hygiene. The latrines scored poorly on the indicators related to the privacy structure and seat covers. Interestingly those are the two items least likely to be included in project subsidies. Furthermore, scores for hygiene-related indicators were low; particularly those related to hand washing and cleanliness of the kitchen, indicating potential for improvement in hygiene education. Based on these outcomes, the EH sector should consider including subsidies and standardized designs for privacy structures and seat covers for latrines. In addition, the universal adoption of contracts and/or deposits for project beneficiaries is expected to improve the completion of latrines. In order to address the low scores in the health and hygiene indicators, the EH sector should adapt volunteer training, in addition to standardizing health and hygiene intervention procedures. In doing so, the sector should mimic the Community Health Club model that has shown success in improving health and hygiene indicators, as well as use a training session plan format similar to those in the Water Committee Seminar manual. Finally, the sector should have an experienced volunteer dedicated to program oversight and post-project monitoring and evaluation.

Managing a World Heritage Site – Potentials and Limitations of Transdisciplinary Approaches

Management of the World Heritage Site Swiss Alps Jungfrau-Aletsch is challenged by the interplay of conservation and economic development. This is a situation where a knowledge-based solution is sought for a complex societal problem. This sets the frame for transdisciplinary research where the problem is defined and solved cooperatively by actors from science and the life-world. In this paper we re-examine studies carried out in the region of the WHS Jungfrau-Aletsch and reveal the issue of integration into participation, the issue of perceptions and positions as well as the issue of negotiability and implementation as key issues prevalent in transdisciplinary settings. The transdisciplinary setting in the case of the WHS Jungfrau-Aletsch constructs a situation of mutual learning among stakeholders from different levels and backgrounds. However, the positive effects of mutual learning are continuously challenged by the power play inherent in participatory approaches.

Critical issues in managing protected areas by multi-stakeholder participation - analysis of a process in the Swiss Alps

Balancing the frequently conflicting priorities of conservation and economic development poses a challenge to management of the Swiss Alps Jungfrau-Aletsch World Heritage Site (WHS). This is a complex societal problem that calls for a knowledge-based solution. This in turn requires a transdisciplinary research framework in which problems are defined and solved cooperatively by actors from the scientific community and the life-world. In this article we re-examine studies carried out in the region of the Swiss Alps Jungfrau-Aletsch WHS, covering three key issues prevalent in transdisciplinary settings: integration of stakeholders into participatory processes; perceptions and positions; and negotiability and implementation. In the case of the Swiss Alps Jungfrau-Aletsch WHS the transdisciplinary setting created a situation of mutual learning among stakeholders from different levels and backgrounds. However, the studies showed that the benefits of such processes of mutual learning are continuously at risk of being diminished by the power play inherent in participatory approaches.

Traditionen, Utopien, Dekonstruktionen - die Sozialstaatskonzepte des 'Ostblocks' (1945-1990)

The welfare state concepts in Eastern Europe under state socialism (1945-1990) were based on the conviction that only the state was responsible for solving all social problems. The 'bourgeois' manners of individual care were substituted by general measures in the field of labour- and family politics, as well as urban development. The experience showed however that this way of substitution was an illusion, because certain target groups were still in need of help (for example ill or handicapped children and adults, elderly people etc). Nevertheless, most of the Eastern European countries - with the exception of Yugoslavia - decided to abolish the existing forms of professional social work and the training for social workers. Instead, they invented 'surrogate structures' to manage the care for the 'needy': Various institutions and occupational groups (schools, hospitals and ambulances, employees groups etc.) took over the tasks of social workers and were trained to fulfil this as a kind of 'social practice'. Therefore, it is wrong to claim that social work was completely abolished under state socialism, But: as social work 'as such' did not exist any longer, it is more reasonable to speak of welfare state concepts, including social policy on one hand, and non- or paraprofessional social practice on the other. To characterize the effect of these welfare state concepts three parameter of interpretation seem to be useful: 'traditions', 'visions', and 'deconstructions' - embedded in a system of repression as well as incentives. Traditions: The huge 'social laboratory' that was installed was not a totally new one - it still carried on the heritage of the bygone: some bourgeois traces as well as elements out of the fascist heritage and -last but not least - the traditions of their own socialist movement. Visions: The socialist traditions included visions of social justice, the creation of a 'new mankind', a classless society, the end of exploitation and a peaceful living together of all people. Although the 'real existing socialism' has destroyed most of these visions, the power of these utopian ideas has outshined a lot of the every day’s misfortune and injustice for quite a long time. Deconstructions: The term of 'deconstruction' has a threefold meaning: the deconstruction of professional welfare, the deconstruction - in the sense of reinterpretation - of the socialist ideals such as social justice and social security, making an instrument of inclusion and exclusion out of it. And the deconstruction that is necessary to free the history of social work under state socialism from the prejudices and distorting practices, from both sides, the east and the west. In the contribution these three parameter of interpretation are applied on the following issues: The gaps in the 'overall system' of social security; working morale and education for work; mass organisations as an instrument of egalitarianism and general prevention; de-professionalisation by 'surrogating' social work; the 'transparent client'; church as refuge or 'state organ'; women’s politics as bio-politics.

Soziale Dienste, Schule und zivilgesellschaftliches Klima

In an international perspective cooperation between social services and school has a long tradition. In the German speaking countries we can recognize a historical distance or gap between school and “social pedagogy”, but despite this tradition new forms of cooperation are arising since the last few years. This tendency is part of the development of European societies into “knowledge-based societies” where knowledge and cultural capital are becoming ever stricter criteria for participation in society. This puts particular pressure on those adolescents who threaten to fail in the positional competition for educational qualifications. And it tends to the reproduction and reinforcing of social inequalities due to inequalities in education. For that reason in the article the development of school related social services in different European countries is investigated and it is shown that the increasing pressure to qualification and selection in school creates various problems of integration. Social dimensions of education are pointed out delivering starting points for the cooperation of social services in school and opening opportunities for productive forms of coping with differences between family background, informal social environment and educational milieu in school. Particular attention is paid to differences in socio cultural habits, in socio economical opportunities and in collective practices of interaction. A central focus in the contribution is the orientation towards a participative civil society climate relevant for the interaction between teachers and pupils and between professionals and addressees of social services as well. It is a task of future research in school related social services to analyse their institutional structure and their practices of professional interaction and to find out by European and international comparison in which way social services can contribute to the establishing of a participative civil society climate in school.

Plasticity, plasticity, plasticity…and the rigid problem of sex

Why is popular understanding of female-male differences still based on rigid models of development, even though contemporary developmental sciences emphasize plasticity? Is it because the science of sex differences still works from the same rigid models?

Establishing occupational and environmental health design requirements for Lunar and Mars settlements

In a study of Lunar and Mars settlement concepts, an analysis was made of fundamental design assumptions in five technical areas against a model list of occupational and environmental health concerns. The technical areas included the proposed science projects to be supported, habitat and construction issues, closed ecosystem issues, the "MMM" issues--mining, material-processing, and manufacturing, and the human elements of physiology, behavior and mission approach. Four major lessons were learned. First it is possible to relate public health concerns to complex technological development in a proactive design mode, which has the potential for long-term cost savings. Second, it became very apparent that prior to committing any nation or international group to spending the billions to start and complete a lunar settlement, over the next century, that a significantly different approach must be taken from those previously proposed, to solve the closed ecosystem and "MMM" problems. Third, it also appears that the health concerns and technology issues to be addressed for human exploration into space are fundamentally those to be solved for human habitation of the earth (as a closed ecosystem) in the 21st century. Finally, it is proposed that ecosystem design modeling must develop new tools, based on probabilistic models as a step up from closed circuit models. ^

Explaining Variations in Client Extra Costs between Software Projects Offshored to India

Gaining economic benefits from substantially lower labor costs has been reported as a major reason for offshoring labor-intensive information systems services to low-wage countries. However, if wage differences are so high, why is there such a high level of variation in the economic success between offshored IS projects? This study argues that offshore outsourcing involves a number of extra costs for the ^his paper was recommended for acceptance by Associate Guest Editor Erran Carmel. client organization that account for the economic failure of offshore projects. The objective is to disaggregate these extra costs into their constituent parts and to explain why they differ between offshored software projects. The focus is on software development and maintenance projects that are offshored to Indian vendors. A theoretical framework is developed a priori based on transaction cost economics (TCE) and the knowledge-based view of the firm, comple mented by factors that acknowledge the specific offshore context The framework is empirically explored using a multiple case study design including six offshored software projects in a large German financial service institution. The results of our analysis indicate that the client incurs post contractual extra costs for four types of activities: (1) re quirements specification and design, (2) knowledge transfer, (3) control, and (4) coordination. In projects that require a high level of client-specific knowledge about idiosyncratic business processes and software systems, these extra costs were found to be substantially higher than in projects where more general knowledge was needed. Notably, these costs most often arose independently from the threat of oppor tunistic behavior, challenging the predominant TCE logic of market failure. Rather, the client extra costs were parti cularly high in client-specific projects because the effort for managing the consequences of the knowledge asymmetries between client and vendor was particularly high in these projects. Prior experiences of the vendor with related client projects were found to reduce the level of extra costs but could not fully offset the increase in extra costs in highly client-specific projects. Moreover, cultural and geographic distance between client and vendor as well as personnel turnover were found to increase client extra costs. Slight evidence was found, however, that the cost-increasing impact of these factors was also leveraged in projects with a high level of required client-specific knowledge (moderator effect).

Knowledge representation through graphs

Due to the increasing amount of data, knowledge aggregation, representation and reasoning are highly important for companies. In this paper, knowledge aggregation is presented as the first step. In the sequel, successful knowledge representation, for instance through graphs, enables knowledge-based reasoning. There exist various forms of knowledge representation through graphs; some of which allow to handle uncertainty and imprecision by invoking the technology of fuzzy sets. The paper provides an overview of different types of graphs stressing their relationships and their essential features.

Improved methods for measuring forest landscape structure: LiDAR complements field-based habitat assessment

Conservation and monitoring of forest biodiversity requires reliable information about forest structure and composition at multiple spatial scales. However, detailed data about forest habitat characteristics across large areas are often incomplete due to difficulties associated with field sampling methods. To overcome this limitation we employed a nationally available light detection and ranging (LiDAR) remote sensing dataset to develop variables describing forest landscape structure across a large environmental gradient in Switzerland. Using a model species indicative of structurally rich mountain forests (hazel grouse Bonasa bonasia), we tested the potential of such variables to predict species occurrence and evaluated the additional benefit of LiDAR data when used in combination with traditional, sample plot-based field variables. We calibrated boosted regression trees (BRT) models for both variable sets separately and in combination, and compared the models’ accuracies. While both field-based and LiDAR models performed well, combining the two data sources improved the accuracy of the species’ habitat model. The variables retained from the two datasets held different types of information: field variables mostly quantified food resources and cover in the field and shrub layer, LiDAR variables characterized heterogeneity of vegetation structure which correlated with field variables describing the understory and ground vegetation. When combined with data on forest vegetation composition from field surveys, LiDAR provides valuable complementary information for encompassing species niches more comprehensively. Thus, LiDAR bridges the gap between precise, locally restricted field-data and coarse digital land cover information by reliably identifying habitat structure and quality across large areas.

A different perspective on poverty in Lao PDR: Multidimensional poverty in Lao PDR for the years 2002/2003 and 2007/2008

This paper presents an indicator for measuring multidimensional poverty in the Lao People’s Democratic Republic applying the Alkire–Foster methodology to the Lao Expenditure and Consumption Survey 2002/2003 and 2007/2008. We calculated a multidimensional poverty index (MPI) that includes three dimensions: education, health, and standard of living. Making use of the MPI’s decomposability, we analyse how much each of the different dimensions and its respective indicators contribute to the overall MPI. We find a marked reduction in the multidimensional poverty headcount ratio over the study period, regardless of how the indicators are weighted or how the deprivation and poverty cut-offs are set. This reduction is based on improvements regarding all indicators except cooking fuel and nutrition. We observe no significant reduction in the intensity of poverty, however; there are wide disparities between the country’s regions and between urban and rural areas. The proportion of poor people in rural areas is more than twice as high as that in urban areas. By complementing the traditional income-based poverty measure, we hope to provide useful information that can support knowledge-based decision-making for poverty alleviation.