The sedimentology of unconsolidated deltaic and aeolian sediments east of Dunnville, Ontario /

Surficial sediments east of Dunnville, Ontario representing a limited deltaic/lacustrine/aeolian system are investigated with the aim of defining and interpreting their geological history by means of exarrrrning their sedimentology and interrelationships. The Folk and \oJard grain size statistics of samples fran the area were calculated. These sample parameters were e1en plotted on maps to detennine regional patterns. The strongest pattern observed was one of distinct fining to the east, away fran the sand source. Aeolian deposits were fourrl to be better sorted than the surrcunding sediments. The grain size parameter values were also plotted on bivariate graphs in an attempt to separate the samples according to depositional environment. This exercise met with little success, as rrost of the sediments sampled in the area have similar grain size parameters. This is believed to be because the sediment sources for the different environments (delta, distal delta, aeolian dune) are intimately related, to the point that nnst dunes appear to have been sourcErl fran immediately local sediments. It is FOstulated that in such a srrall sedimentological sub-system, sediments were not involved in active transport for a length of time sufficient for the rraterial to cane to equilibritnn with its transporting medium. Thus, fe..v distinctive patterns of parameters were developed that would enable one to differentiate between various environments of neposition. The i.rnTaturity of rrany dune forms and the i.Imaturity of mineralogical composition of all deposits support the above hyt:XJthesis of limited transport time. Another hypothesis proposen is that eadh geologically or geographically distinct area or "sub-system" rray have its o,.m "signature" of grain size relationships as plotted on bivariate graphs. Thus, the emphasis, concerning graphs of this type, should not be placErl on attempting to nifferentiate between various environnents of deposition, hut raB1er on investigating the interrelationships between sanples am environments within that "sub-system". Through the course of this investigation, the existence of nelta plain distributary Channels in the thesis area is SUG0ested, and the mscovery of significantly mfferent sub-units within the TUnnville dune sediments is documented. It is inferred by reference to other authors interpretations of the glacial history of the area, that the tirre of effective aeolian acti vi ty in the Dunnville area was between 12,300 to 12,100 years R.p.

Application of thermal ion-molecule reactions in tackling spectroscopic inferences in inductively coupled plasma mass spectrometry

Part I: Ultra-trace determination of vanadium in lake sediments: a performance comparison using O2, N20, and NH3 as reaction gases in ICP-DRC-MS Thermal ion-molecule reactions, targeting removal of specific spectroscopic interference problems, have become a powerful tool for method development in quadrupole based inductively coupled plasma mass spectrometry (ICP-MS) applications. A study was conducted to develop an accurate method for the determination of vanadium in lake sediment samples by ICP-MS, coupled with a dynamic reaction cell (DRC), using two differenvchemical resolution strategies: a) direct removal of interfering C10+ and b) vanadium oxidation to VO+. The performance of three reaction gases that are suitable for handling vanadium interference in the dynamic reaction cell was systematically studied and evaluated: ammonia for C10+ removal and oxygen and nitrous oxide for oxidation. Although it was able to produce comparable results for vanadium to those using oxygen and nitrous oxide, NH3 did not completely eliminate a matrix effect, caused by the presence of chloride, and required large scale dilutions (and a concomitant increase in variance) when the sample and/or the digestion medium contained large amounts of chloride. Among the three candidate reaction gases at their optimized Eonditions, creation of VO+ with oxygen gas delivered the best analyte sensitivity and the lowest detection limit (2.7 ng L-1). Vanadium results obtained from fourteen lake sediment samples and a certified reference material (CRM031-040-1), using two different analytelinterference separation strategies, suggested that the vanadium mono-oxidation offers advantageous performance over the conventional method using NH3 for ultra-trace vanadium determination by ICP-DRC-MS and can be readily employed in relevant environmental chemistry applications that deal with ultra-trace contaminants.Part II: Validation of a modified oxidation approach for the quantification of total arsenic and selenium in complex environmental matrices Spectroscopic interference problems of arsenic and selenium in ICP-MS practices were investigated in detail. Preliminary literature review suggested that oxygen could serve as an effective candidate reaction gas for analysis of the two elements in dynamic reaction cell coupled ICP-MS. An accurate method was developed for the determination of As and Se in complex environmental samples, based on a series of modifications on an oxidation approach for As and Se previously reported. Rhodium was used as internal standard in this study to help minimize non-spectral interferences such as instrumental drift. Using an oxygen gas flow slightly higher than 0.5 mL min-I, arsenic is converted to 75 AS160+ ion in an efficient manner whereas a potentially interfering ion, 91Zr+, is completely removed. Instead of using the most abundant Se isotope, 80Se, selenium was determined by a second most abundant isotope, 78Se, in the form of 78Se160. Upon careful selection of oxygen gas flow rate and optimization ofRPq value, previous isobaric threats caused by Zr and Mo were reduced to background levels whereas another potential atomic isobar, 96Ru+, became completely harmless to the new selenium analyte. The new method underwent a strict validation procedure where the recovery of a suitable certified reference material was examined and the obtained sample data were compared with those produced by a credible external laboratory who analyzed the same set of samples using a standardized HG-ICP-AES method. The validation results were satisfactory. The resultant limits of detection for arsenic and selenium were 5 ng L-1 and 60 ng L-1, respectively.

Structural, Magnetic and Thermal Studies of Ce1-xEuxCrO3 Nano-Powders

A new series of nano-sized Ce1-xEuxCrO3 (x = 0.0 to 1.0) with an average particle size of 50 - 80 nm were synthesized using a solution combustion method. Nano-powders Ce1-xEuxCrO3 with the canted antiferromagnetic property exhibited interesting magnetic behaviours including the reversal magnetization and the exchange bias effect. The effect of europium doping as the ion with the smaller radius size and different electron con figuration on structural, magnetic and thermal properties of Ce1-xEuxCrO3 were investigated using various experimental techniques, i.e. DC/AC magnetic susceptibility, heat capacity, thermal expansion, Raman scattering, X-ray photoemission spectroscopy, transmission/scanning electron microscopy, X-ray powder diffraction and neutron scattering. An exchange bias effect, magnetization irreversibility and AC susceptibility dispersion in these samples confirmed the existence of the spin disorder magnetic phase in Ce1-xEuxCrO3 compounds. The exchange bias phenomenon, which is assigned to the exchange coupling between glassy-like shell and canted antiferromagnetic core, showed the opposite sign in CeCrO3 and EuCrO3 at low temperatures, suggesting different exchange interactions at the interfaces in these compounds. The energy level excitation of samples were examined by an inelastic neutron scattering which was in good agreement with the heat capacity data. Neutron scattering analysis of EuCrO3 was challenging due to the large neutron absorption cross-section of europium. All diffraction patterns of Ce1-xEuxCrO3 showed the magnetic peak attributed to the antiferromagnetic Cr3+ spins while none of the diffraction patterns could detect the magnetic ordering of the rare-earth ions in these samples.

The role of transcription factor Pitx1 and its regulation by hypoxia in Adolescent Idiopathic Scoliosis

La scoliose idiopathique de l’adolescent (SIA) est définie comme une courbure de la colonne vertébrale supérieure à 10 degrés, qui est de cause inconnue et qui affecte de façon prépondérante les adolescents. Des études précédentes sur des modèles murins ont démontré une inactivation partielle du gène Pitx1. Cette inactivation partielle provoque une déformation spinale sévère lors du développement des souris Pitx1+/-, ce qui est grandement similaire au phénotype de la SIA. En se basant sur ces observations, nous postulons que la perte de fonction de Pitx1 pourrait avoir un rôle dans la SIA et pourrait être régulée par des mécanismes moléculaires spécifiques. En effet, des études faites sur l’expression de Pitx1 révèlent une perte de son expression dans les ostéoblastes dérivés de patients SIA au niveau de l’ARNm. Nous émettons l’hypothèse que la perte de Pitx1 dans la SIA pourrait être déclenchée par des facteurs hypoxiques puisqu’il est connu que Pitx1 est réprimé par l’hypoxie et que HIF-2 alpha est surexprimés dans les ostéoblastes des patients SIA même dans des conditions normoxiques. De plus, nous avons découvert une mutation dans le domaine ODD des HIF-1 alpha chez certains patients SIA (3,1%). Une fonction connue de ce domaine est de stabiliser et d’augmenter l’activité transcriptionnelle de HIF-1 alpha dans des conditions normoxiques. Nous avons confirmé, par la technique EMSA, l’existence d’un élément de réponse fonctionnel à l’hypoxie au niveau du promoteur de Pitx1. Cependant, des co-transfections avec des vecteurs d’expression pour HIF-1 alpha et HIF-2 alpha, en présence de leur sous-unité beta ARNT, ont conduit à une activation du promoteur de Pitx1 dans la lignée cellulaire MG-63 ainsi que dans les ostéoblastes des sujets contrôles. Il est intéressant de constater qu’aucune activité du promoteur de Pitx1 dans les ostéoblastes SIA n’a été observée, même après la co-expression de HIF-2 alpha et ARNT, confirmant le fait que l’expression de Pitx1 est abrogée dans la SIA. Dans l’ensemble, nos résultats démontrent un rôle important de Pitx1 dans la SIA et une possible régulation par des facteurs hypoxiques.

Selective inhibition of inducible nitric oxide synthase prevents lipid peroxidation in cartilage from patients with osteoarthritis.

INTRODUCTION: Emerging evidence indicates that nitric oxide (NO), which is increased in osteoarthritic (OA) cartilage, plays a role in 4-hydroxynonenal (HNE) generation through peroxynitrite formation. HNE is considered as the most reactive product of lipid peroxidation (LPO). We have previously reported that HNE levels in synovial fluids are more elevated in knees of OA patients compared to healthy individuals. We also demonstrated that HNE induces a panoply of inflammatory and catabolic mediators known for their implication in OA cartilage degradation. The aim of the present study was to investigate the ability of inducible NO synthase (iNOS) inhibitor, L-NIL (L-N6-(L-Iminoethyl)Lysine), to prevent HNE generation through NO inhibition in human OA chondrocytes. METHOD: Cells and cartilage explants were treated with or without either an NO generator (SIN or interleukin 1beta (IL-1β)) or HNE in absence or presence of L-NIL. Protein expression of both iNOS and free-radical-generating NOX subunit p47 (phox) were investigated by western blot. iNOS mRNA detection was measured by real-time RT-PCR. HNE production was analysed by ELISA, Western blot and immunohistochemistry. S-nitrosylated proteins were evaluated by Western Blot. Prostaglandin E2 (PGE2) and metalloproteinase 13 (MMP-13) levels as well as glutathione S-transferase (GST) activity were each assessed with commercial kits. NO release was determined using improved Griess method. Reactive oxygen species (ROS) generation was revealed using fluorescent microscopy with the use of commercial kits. RESULTS: L-NIL prevented IL-1β-induced NO release, iNOS expression at protein and mRNA levels, S-nitrosylated proteins and HNE in a dose dependent manner after 24h of incubation. Interestingly, we revealed that L-NIL abolished IL-1β-induced NOX component p47phox as well as ROS release. The HNE-induced PGE2 release and both cyclooxygenase-2 (COX-2) and MMP-13 expression were significantly reduced by L-NIL addition. Furthermore, L-NIL blocked the IL-1β induced inactivation of GST, an HNE-metabolizing enzyme. Also, L-NIL prevented HNE induced cell death at cytotoxic levels. CONCLUSION: Altogether, our findings support a beneficial effect of L-NIL in OA by preventing LPO process in NO-dependent and/or independent mechanisms.

Modèle cellulaire de carcinogenèse pour les cancers de l’oropharynx induits par le VPH

Problématique: Le virus du papillome humain (VPH) est présent dans près de 50% des cancers de l’oropharynx. Le potentiel oncogénique du VPH est encodé dans les oncoprotéines E6 et E7, qui agissent en modulant différents gènes, dont les gènes suppresseurs de tumeur p53 et pRb. Les cellules VPH positives démontrent une altération au niveau de la signalisation de la réponse aux dommages à l’ADN (RDA), un mécanisme de contrôle dans l’arrêt de la croissance des cellules ayant subit des dommages au niveau de leur ADN. Hypothèse et objectifs : Nous croyons que les défauts au niveau de la RDA des cancers VPH positifs peuvent être exploités afin de sensibiliser préférentiellement les cellules cancéreuses aux traitements de radiothérapie. Cette stratégie de recherche nécessite l’élaboration d’un modèle cellulaire de carcinogenèse isogénique pour le cancer de l’oropharynx que nous proposons de développer et de caractériser. L’étude vise à dériver des lignées isogéniques à partir de kératinocytes primaires et cellules épithéliales de l’oropharynx pour ensuite valider la carcinogenèse de notre modèle in vitro & in vivo Méthodologie : Des lignées cellulaires de kératinocytes primaires et de cellules épithéliales de l’oropharynx ont été successivement modifiées par transduction afin de présenter les mutations associées aux cancers de l’oropharynx induits par le VPH. Les cellules ont été modifiées avec des lentivirus codants pour la télomérase (hTERT), les oncogènes E6, E7 et RasV12. Afin de valider la cancérogenèse in vitro de notre modèle, des études d’invasion en matrigel et de croissance sans ancrage en agar mou ont été réalisées. Les populations cellulaires transformées ont été ensuite introduites dans des souris immunodéficientes afin d’évaluer leur tumorogénicité in vivo. Résultats : À partir des plasmides recombinés construits par méthodes de clonage traditionnelle et de recombinaison « Gateway », nous avons produit des lentivirus codants pour la télomérase humaine (hTERT), les oncogènes viraux E6 et E7 et l’oncogène Ras. Les kératinocytes primaires et cellules épithéliales de l’oropharynx ont été infectés successivement par transduction et sélectionnés. Nous avons validé l’expression de nos transgènes par méthode d’immunofluorescence, de Western Blot et de réaction de polymérisation en chaîne quantitative en temps réel (qRT-PCR). Nous avons établi trois lignées des cellules épithéliales de l’oropharynx (HNOE) à partir d’échantillons tissulaires prélevés lors d’amygdalectomie (HNOE42, HNO45, HNOE46). Les cellules transduites avec le lentivirus exprimant le promoteur fort CMV/TO de l’oncogène RasV12 ont présenté un changement morphologique compatible avec une sénescence prématurée induite par l’oncogène Ras. En exprimant des quantités plus faibles du RasV12 mutant, la lignée cellulaire HEKn hTERT-E6-E7 PGK RasV12 a réussi à échapper à la sénescence induite par l’oncogène Ras. La population cellulaire exprimant HEKn hTERT-E6-E7-PGK RasV12 a présenté un phénotype malin en culture et à l’étude d'invasion, mais n’a pas démontré de résultats positifs à l’étude de croissance sans ancrage en agar mou ni en xénogreffe en souris immunodéficientes. Conclusion : Nos résultats démontrent qu’en présence des oncogènes viraux E6 et E7, il y a un troisième mécanisme suppresseur de tumeur qui médie la sénescence induite par l’oncogène Ras. Nous avons identifié que la présence de E6 seule ne suffit pas à immortaliser les kératinocytes primaires humains (HEKn). Nous n’avons pas réussi à créer un modèle in vitro de carcinogenèse pour les cancers de l’oropharynx induits par le VPH.

Complex permittivity and conductivity of poly aniline at microwave frequencies

Dielectric properties of polyaniline at different frequencies were studied. Cavity perturbation technique was employed for the study. Poly aniline in the powder and pelletised forms were prepared under different environmental conditions. Different samples of poly aniline exhibit high conductivity. However, the conductivity of samples prepared under different environmental conditions is found to vary. All the samples in the powder form have high conductivity irrespective of the method of preparation. The high conductivity at microwave frequency makes it possible to be used for developing microwave components like filters.

OFFLINE AND ONLINE SOLID PHASE EXTRACTION/PRECONCENTRATION OF INORGANICS

Solid phase extraction (SPE) is a powerful technique for preconcentration/removal or separation of trace and ultra trace amounts of toxic and nutrient elements. SPE effectively simplifies the labour intensive sample preparation, increase its reliability and eliminate the clean up step by using more selective extraction procedures. The synthesis of sorbents with a simplified procedure and diminution of the risks of errors shows the interest in the areas of environmental monitoring, geochemical exploration, food, agricultural, pharmaceutical, biochemical industry and high purity metal designing, etc. There is no universal SPE method because the sample pretreatment depends strongly on the analytical demand. But there is always an increasing demand for more sensitive, selective, rapid and reliable analytical procedures. Among the various materials, chelate modified naphthalene, activated carbon and chelate functionalized highly cross linked polymers are most important. In the biological and environmental field, large numbers of samples are to be analysed within a short span of time. Hence, online flow injection methods are preferred as they allow extraction, separation, identification and quantification of many numbers of analytes. The flow injection online preconcentration flame AAS procedure developed allows the determination of as low as 0.1 µg/l of nickel in soil and cobalt in human hair samples. The developed procedure is precise and rapid and allows the analysis of 30 samples per hour with a loading time of 60 s. The online FI manifold used in the present study permits high sampling, loading rates and thus resulting in higher preconcentration/enrichment factors of -725 and 600 for cobalt and nickel respectively with a 1 min preconcentration time compared to conventional FAAS signal. These enrichment factors are far superior to hitherto developed on line preconcentration procedures for inorganics. The instrumentation adopted in the present study allows much simpler equipment and low maintenance costs compared to costlier ICP-AES or ICP-MS instruments.

Characterization of Selected Photonic Materials and Systems Using Photoacoustic Technique

The photoacoustic investigations carried out on different photonic materials are presented in this thesis. Photonic materials selected for the investigation are tape cast ceramics, muItilayer dielectric coatings, organic dye doped PVA films and PMMA matrix doped with dye mixtures. The studies are performed by the measurement of photoacoustic signal generated as a result of modulated cw laser irradiation of samples. The gas-microphone scheme is employed for the detection of photoacoustic signal. The different measurements reported here reveal the adaptability and utility of the PA technique for the characterization of photonic materials.Ceramics find applications in the field of microelectronics industry. Tape cast ceramics are the building blocks of many electronic components and certain ceramic tapes are used as thermal barriers. The thermal parameters of these tapes will not be the same as that of thin films of the same materials. Parameters are influenced by the presence of foreign bodies in the matrix and the sample preparation technique. Measurements are done on ceramic tapes of Zirconia, Zirconia-Alumina combination, barium titanate, barium tin titanate, silicon carbide, lead zirconate titanateil'Z'T) and lead magnesium niobate titanate(PMNPT). Various configurations viz. heat reflection geometry and heat transmission geometry of the photoacoustic technique have been used for the evaluation of different thermal parameters of the sample. Heat reflection geometry of the PA cell has been used for the evaluation of thermal effusivity and heat transmission geometry has been made use of in the evaluation of thermal diffusivity. From the thermal diffusivity and thermal effusivity values, thermal conductivity is also calculated. The calculated values are nearly the same as the values reported for pure materials. This shows the feasibility of photoacoustic technique for the thermal characterization of ceramic tapes.Organic dyes find applications as holographic recording medium and as active media for laser operations. Knowledge of the photochemical stability of the material is essential if it has to be used tor any of these applications. Mixing one dye with another can change the properties of the resulting system. Through careful mixing of the dyes in appropriate proportions and incorporating them in polymer matrices, media of required stability can be prepared. Investigations are carried out on Rhodamine 6GRhodamine B mixture doped PMMA samples. Addition of RhB in small amounts is found to stabilize Rh6G against photodegradation and addition of Rh6G into RhB increases the photosensitivity of the latter. The PA technique has been successfully employed for the monitoring of dye mixture doped PMMA sample. The same technique has been used for the monitoring of photodegradation ofa laser dye, cresyl violet doped polyvinyl alcohol also.Another important application of photoacoustic technique is in nondestructive evaluation of layered samples. Depth profiling capability of PA technique has been used for the non-destructive testing of multilayer dielectric films, which are highly reflecting in the wavelength range selected for investigations. Eventhough calculation of thickness of the film is not possible, number of layers present in the system can be found out using PA technique. The phase plot has clear step like discontinuities, the number of which coincides with the number of layers present in the multilayer stack. This shows the sensitivity of PA signal phase to boundaries in a layered structure. This aspect of PA signal can be utilized in non-destructive depth profiling of reflecting samples and for the identification of defects in layered structures.

Thermal characterization of nanocrystalline porous CePO4 ceramics

A laser-induced photoacoustic technique was employed to investigate thermal transport through nanocrystalline CePO4 samples prepared via the sol–gel route. Evaluation of thermal diffusivity was carried out using the one-dimensional model of Rosencwaig and Gersho for the reflection configuration of the photoacoustic method. Structural analyses of samples revealed that they are nanoporous in nature, possessing micron-sized grains. Analysis of results shows that thermal diffusivity value varies with sintering temperature. Results are explained in terms of the variation in porosity with sintering temperature and the effects of various scattering mechanisms on the propagation of phonons through the nanoporous ceramic matrix. Further analyses confirm that apart from porosity, grain boundary resistance and interface thermal resistance influence the effective value of thermal diffusivity of the samples under investigation.

Modification of Polypropylene and Polystyrene Using Nanosilica

The present work focuses on the modification of the commonly used thermoplastics, polypropylene and polystyrene using nanosilica preparcd from a cheap source of sodium silicate. Melt compounding technique has been used for nanocomposite preparation as it is simple and suited to injection moulding. Nanosilica in a polymer matrix provide significant enhancement in strength, stiffness and impact strength. Incorporation of silica particles in a polymer also improves its thennal stability. To achieve better dispersion of fillers in polymer matrices the mixing was done at different shear rates. The enhancement in material properties indicates that at higher shear rates there is greater interaction between particles and the matrix and it depends on filler concentration and type of polymer used. N anosilica is a useful filler in thennoplastic polymers and has been applied in automotive applications, electronic appliances and consumer goods.This thesis is divided into six chapters. General introduction to the topic is described in chapter 1. Salient features of polymer nanocomposites, their synthesis, properties and applications are presented. A review of relevant literature and the scope and objectives are also mentioned in this chapter.The materials used and the vanous experimental method and techniques employed in the study are described in chapter 2. Preparation of nanocomposites by melt blending using Thenno Haake Rheocord, preparation of samples, evaluation of mechanical and thennal properties using UTM, Impact testing and characterization using DMA, TGA and DSC and morphology by SEM are described.The preparation of nanosilica from a laboratory scale to a pilot plant scale is described in chapter 3. Generation of surface modified silica, evaluation of kinetic parameters of the synthesis reaction, scale up of the reactor and modeling of the reactor are also dealt with in this chapter.The modification of the commodity thennoplastic, Polypropylene using nanosilica is described in chapter 4. Preparation of PP/silica nanocomposites, evaluation of mechanical properties, thermal and crystallization characteristics, water absorption and ageing resistance studies are also presented.The modification of Polystyrene using synthesized nanosilica IS described in chapter 5. The method of preparation of PS/silica nanocomposites, evaluation of mechanical properties (static and dynamic), thermal properties melt flow characteristics using Haake Rheocord, water absorption and ageing resistance of these nanocomposites are studied.

Speech Analysis using Modern Techniques of Nonlinear Dynamics

Medical fields requires fast, simple and noninvasive methods of diagnostic techniques. Several methods are available and possible because of the growth of technology that provides the necessary means of collecting and processing signals. The present thesis details the work done in the field of voice signals. New methods of analysis have been developed to understand the complexity of voice signals, such as nonlinear dynamics aiming at the exploration of voice signals dynamic nature. The purpose of this thesis is to characterize complexities of pathological voice from healthy signals and to differentiate stuttering signals from healthy signals. Efficiency of various acoustic as well as non linear time series methods are analysed. Three groups of samples are used, one from healthy individuals, subjects with vocal pathologies and stuttering subjects. Individual vowels/ and a continuous speech data for the utterance of the sentence "iruvarum changatimaranu" the meaning in English is "Both are good friends" from Malayalam language are recorded using a microphone . The recorded audio are converted to digital signals and are subjected to analysis.Acoustic perturbation methods like fundamental frequency (FO), jitter, shimmer, Zero Crossing Rate(ZCR) were carried out and non linear measures like maximum lyapunov exponent(Lamda max), correlation dimension (D2), Kolmogorov exponent(K2), and a new measure of entropy viz., Permutation entropy (PE) are evaluated for all three groups of the subjects. Permutation Entropy is a nonlinear complexity measure which can efficiently distinguish regular and complex nature of any signal and extract information about the change in dynamics of the process by indicating sudden change in its value. The results shows that nonlinear dynamical methods seem to be a suitable technique for voice signal analysis, due to the chaotic component of the human voice. Permutation entropy is well suited due to its sensitivity to uncertainties, since the pathologies are characterized by an increase in the signal complexity and unpredictability. Pathological groups have higher entropy values compared to the normal group. The stuttering signals have lower entropy values compared to the normal signals.PE is effective in charaterising the level of improvement after two weeks of speech therapy in the case of stuttering subjects. PE is also effective in characterizing the dynamical difference between healthy and pathological subjects. This suggests that PE can improve and complement the recent voice analysis methods available for clinicians. The work establishes the application of the simple, inexpensive and fast algorithm of PE for diagnosis in vocal disorders and stuttering subjects.

Complex permittivity and conductivity of poly aniline at microwave frequencies

Dielectric properties of polyaniline at different frequencies were studied. Cavity perturbation technique was employed for the study. Poly aniline in the powder and pelletised forms were prepared under different environmental conditions. Different samples of poly aniline exhibit high conductivity. However. the conductivity of samples prepared under different environmental conditions is found to vary. All the samples in the powder form have high conductivity irrespective of the method of preparation. The high conductivity at microwave frequency makes it possible to be used for developing microwave components like filters.

Benthic ecology of selected prawn culture fields and ponds near Cochin

The thesis on the"Benthic ecology of selected prawn culture fields and ponds near Cochin” was taken up with a view to provide information on the qualitative and quantitative distribution of benthos and their relationships to prawnproduction of different culture ecosystems and to the physico-chemical parameters influencing their production. A two-year observation was carried out in nine selected prawn culture systems including perennial ponds (stations 1 to 4) seasonal fields (stations 5 to 7) and contiguous canals (stations 8 and 9) during December 1988 to November 1989. All macro- and meiobenthic organisms contributing to the faua were identified and their abundance, distribution, diversity, biomass and trophic relationships between benthos and prawns were studied. The environmental variables studied were temperature pH, salinity, dissolved oxygen, alkalinity, nitrite-nitrogen, nitrate-nitrogen, amonianitrogen, phosphate and silicate of bottom water and organic carbon and texture of the soil The thesis is presented in 4 Chapters. Chapter I presents an’ INTRODUCTION to the topic of study and a review of relevant works to bring an awareness to the present status of research in benthos and benthic ecology. Chapter 11, MATERIALS AND MTHODS, includes the techniques of sampling, preservation of samples and methods of analyses of various physico-chemical factors and area covered under the study is also given in this chapter. Chapter III, HYDROGRAPHY deals with the results of investigation and discussion onthe physico-chemical parameters of water and Chapter IV, SEDIMENT covers the sedimentoloical characteristics of the different culture systems followed by a detailed discussion. Chapter V, BOTTOM FAUNA presents an account on the various aspects of benthos and benthic ecology and the details of prawn production. A discussion on the overall assessment of interrelations between abiotic and biotic factors is given in Chapter VI, DISCUSSION. A critical evaluation of the implication of benthic production on prawn production under culture conditions and trophic relationships are also included in this chapter. An executive SUMMARY of the observations made during this study is presented in the final section of the thesis .

Studies on sea-cucumbers of minicoy, lakshadweep

This Thesis contains a detailed account of the results of the investigations on the "Studies on sea cucumbers of Minicoy, Lakshadweep" from the Arabian Sea, carried out from January 1990 to December 1991. The results are presented and discussed in six chapters, preceded by an "lntroduction", "Review of literature" and "Materials and Methods". A brief account on the importance of sea-cucumbers, its general morphology, present status of sea-cucumbers and their fishery in India and the major objectives of the present study are given in the "lntroduction" "Review of Literature" has covered and reviewed almost all available published reports and informations on sea-cucumbers on global basis, with special emphasis on Indian region and particularly in Minicoy Island. The Minicoy Island topography particularly the lagoon and reef flat area, discretion of sampling stations, survey on sea-cucumbers in space and time, analysis of samples both in the field and laboratory, statistical analysis of data, etc. and the period of study are given under "Materials and Methods.