A temporary loss of pace or the "middle income trap" - a commentary on the tasks for Hungary's economic development

The latest Hungarian economic growth data, though favourable, do not let us forget that in the longer term growth is weak compared to the preceding period – as well as to the performance of the East-Central European region, which is more dynamic than the European average. In order to make sense of the past decade’s relative loss of pace and lay the foundations for future development policy, it is worth placing Hungary’s case in the context of the slowing tempo typical of middle-income countries. The economic development policies currently pursued by the government are aimed at increasing output in the processing industry, and by extension exports, while relevant international experience advises that it is the higher value-added activities of the global value chain, particularly business services, which should be developed further. In this way real wages and income levels could be increased, and the economy would be less exposed to the fluctuations of international cycles.

Az autóipar szerkezeti átrendeződése – Vállalati stratégiák és a válság hatásai (Structural change in the automotive industry – corporate strategies and the impact of the crisis)

Az írás a globális értékláncok élén álló autóipari cégek világgazdasági válságra adott reakcióit foglalja össze. Megállapítja, hogy a válságnak messze nincs vége: az iparág globális átrendeződése folytatódik. A globális értékláncokba sikeresen betagozódott közép-európai autóipari klaszter ezeknek a folyamatoknak mindmáig nyertese volt. Számolni kell azonban azzal, hogy továbbra is sok a technológiai és a piaci bizonytalanság: az új szereplők belépése, új üzleti modellek elterjedése hosszabb távon felboríthatja a jelenlegi status quo-t, és veszélyeztetheti a hagyományos autóipari befektetőiket munkabér-alapú versenyképességgel megtartani próbáló közép- és kelet-európai országok pozícióit. Az autóipari működő tőkét fogadó közép-kelet-európai országok számára hosszabb távon veszélyt jelenthet az autóipari üzleti modellek átalakulása, a gyártás teljes kiszervezése komplex gyártási szolgáltatást vállaló cégekhez, mivel ez esetben az értéklánc vezető vállalatai bezárhatják a régióban működő gyártóbázisaikat. Az értékláncok élén álló globális cégek „menekülés a minőségbe” stratégiája helyi szinten is követhető, követendő, a működő tőkét fogadó országok versenyképessége kizárólag a helyi leányvállalatok állandó „feljebb lépésével” tartható fenn. ______ This paper summarizes lead firms’ reactions to crisis in global automotive value chains. The paper advances five theses. Author argues that crisis is not over yet, the global restructuring of the industry continues. Actors in the CEE automotive cluster have successfully become integrated into global value chains and have thereby been the winners of past restructuring processes. Nevertheless, technological and market uncertainties prevail: entry of new economic actors and the diffusion of new business models may, in the long run, disrupt the current status quo and jeopardise the world economic position of CEE countries that have been relying solely on their labour cost advantages to sustain direct investment inflows in their automotive industries. In the long run the automotive industries of Central and Eastern European (CEE) economies may become threatened by the transformation of the prevailing automotive business model, the outsourcing of manufacturing and related support activities to complex manufacturing services providers, which could lead to the closure of lead firms’ manufacturing facilities in CEE. Lead firms’ increased focus on high quality high value adding activities strategy can and should be followed by local subsidiaries through a continuous strive for upgrading.

Realization of Differentiated Quality of Service for Wideband Code Division Multiple Access Core Network

The development of 3G (the 3rd generation telecommunication) value-added services brings higher requirements of Quality of Service (QoS). Wideband Code Division Multiple Access (WCDMA) is one of three 3G standards, and enhancement of QoS for WCDMA Core Network (CN) becomes more and more important for users and carriers. The dissertation focuses on enhancement of QoS for WCDMA CN. The purpose is to realize the DiffServ (Differentiated Services) model of QoS for WCDMA CN. Based on the parallelism characteristic of Network Processors (NPs), the NP programming model is classified as Pool of Threads (POTs) and Hyper Task Chaining (HTC). In this study, an integrated programming model that combines both of the two models was designed. This model has highly efficient and flexible features, and also solves the problems of sharing conflicts and packet ordering. We used this model as the programming model to realize DiffServ QoS for WCDMA CN. ^ The realization mechanism of the DiffServ model mainly consists of buffer management, packet scheduling and packet classification algorithms based on NPs. First, we proposed an adaptive buffer management algorithm called Packet Adaptive Fair Dropping (PAFD), which takes into consideration of both fairness and throughput, and has smooth service curves. Then, an improved packet scheduling algorithm called Priority-based Weighted Fair Queuing (PWFQ) was introduced to ensure the fairness of packet scheduling and reduce queue time of data packets. At the same time, the delay and jitter are also maintained in a small range. Thirdly, a multi-dimensional packet classification algorithm called Classification Based on Network Processors (CBNPs) was designed. It effectively reduces the memory access and storage space, and provides less time and space complexity. ^ Lastly, an integrated hardware and software system of the DiffServ model of QoS for WCDMA CN was proposed. It was implemented on the NP IXP2400. According to the corresponding experiment results, the proposed system significantly enhanced QoS for WCDMA CN. It extensively improves consistent response time, display distortion and sound image synchronization, and thus increases network efficiency and saves network resource.^

Socio-ecological vulnerability to climate change in South Florida

Awareness of extreme high tide flooding in coastal communities has been increasing in recent years, reflecting growing concern over accelerated sea level rise. As a low-lying, urban coastal community with high value real estate, Miami often tops the rankings of cities worldwide in terms of vulnerability to sea level rise. Understanding perceptions of these changes and how communities are dealing with the impacts reveals much about vulnerability to climate change and the challenges of adaptation. ^ This empirical study uses an innovative mixed-methods approach that combines ethnographic observations of high tide flooding, qualitative interviews and analysis of tidal data to reveal coping strategies used by residents and businesses as well as perceptions of sea level rise and climate change, and to assess the relationship between measurable sea levels and perceptions of flooding. I conduct a case study of Miami Beach's storm water master planning process which included sea level rise projections, one of the first in the nation to do so, that reveals the different and sometimes competing logics of planners, public officials, activists, residents and business interests with regards to climate change adaptation. By taking a deeply contextual account of hazards and adaptation efforts in a local area I demonstrate how this approach can be effective at shedding light on some of the challenges posed by anthropogenic climate change and accelerated rates of sea level rise. ^ The findings highlight challenges for infrastructure planning in low-lying, urban coastal areas, and for individual risk assessment in the context of rapidly evolving discourse about the threat of sea level rise. Recognition of the trade-offs and limits of incremental adaptation strategies point to transformative approaches, at the same time highlighting equity concerns in adaptation governance and planning. This new impact assessment method contributes to the integration of social and physical science approaches to climate change, resulting in improved understanding of socio-ecological vulnerability to environmental change.^

Padrão de especialização comercial e crescimento econômico : uma análise sobre o Brasil no contexto da fragmentação da produção e das cadeias globais de valor

Globalization and technological changes that has happened since the 80s have brought remarkable changes in the industrial and commercial paradigm, which are expressed mainly in the international fragmentation of production and in the formation of Global Value Chains (GVC). This thesis sought to understand such phenomena and discuss new relevant variables in this context for a more accurate analysis of the current trade patterns not addressed by the seminal economic theories that relate trade and economic growth. It sought to evaluate how the trade specialization pattern of Brazil evolved compared to other economies (China, India, Russia, United States, Japan and selected Latin American economies) in the light of these phenomena from 1995 to 2011. Therefore, we have used the methodology of gross exports decomposition in value added measures, developed by Koopman et al. (2014), and indicators estimated from data of two global matrices I-O: a WIOT (2013) and the TiVA (2015). It was also tested two hypotheses regarding the role of these phenomena as determinants of economic growth in recent years: 1º) fragmentation and participation in GVC ensure higher growth rates for countries; 2º) the place (stage) in which the country finds itself in GVC associated with sectoral technological aspects is also important for economic growth. For this, we used dynamic panel models (Difference GMM and System GMM) for a sample of 40 countries from 2003 to 2011. The studies carried out on Brazil show that the country is no longer on the margins of these phenomena, because it shows increasing rates of participation in GVC, including in sectors considered most strategic for fragmentation. However, there is not a standard convergence of trade specialization of the country to those presented by developed countries or movements earned by China and Mexico in terms of their position and profile of participating in GVC. Another important result obtained by the thesis is the identification of these phenomena are in fact new variables relevant for economic growth, because it shows empirical evidences to support the hypothesis 1 and, partially, the hypothesis 2. A joint analysis of the estimated econometric results with the results of the descriptive analysis of the Brazilian economy, it leads us to conclude that the trade specialization pattern of the country in the context of the new trade setups is presented unfavorably to its growth strategy.

The challenges of safeguarding and securing cultural heritage materials during violent conflict in Nigeria.

Almost every community, country and continent is experiencing a form of conflict, war or disaster. These wars have claimed lives, antiquities, heritage materials, contemporary Arts, Galleries, Museums, Archives, Monuments andHeritage sites. The aim of this study is to explore the challenges of safeguarding cultural heritage material during violent conflict in Nigeria bearing in mind the two UNESCO world heritage sites in Nigeria: Sukur kingdom and Osun Oshogbo sacred Grove. The outcome of this study will help the policy makers to address the challenges of safeguarding cultural heritage materials in times of conflicts, bridge the gap on the existing literature concerning the safeguarding of cultural heritage materials in times of conflict and to make a modest contribution to the existing body of knowledge on cultural heritage protection in Nigeria in particular and other parts of the world in general. This study relies on both primary and secondary sources using questionnaire and oral interview to elicit information from selected relevant cultural agencies, journalists and scholars in the field of art and culture. Relevant literature and documents on the challenges of safeguarding and securing of cultural heritage materials during conflicts were reviewed. The data gathered from the questionnaires and the oral interview is presented in frequency tabular form to give precise and comprehensive insight into the study findings. Notable among the challenges were insecurity and lack of professionalism in the field of cultural heritage profession. The study also revealed that governments are not enforcing the global laws and conventions for the protection of cultural heritage materials in times of violent conflict. The communities where these materials are located have little or no knowledge about the import of these materials and do not take part in securing them in the event of conflict. It is crucial that we place high value on heritage materials since they are inextricably linked with our identity and where we come from. It is strongly recommended that Cultural Heritage Institutions should involve as much as possible the local communities living around the sites by creating awareness educating and encouraging them to take ownership of the Sites located within their communities. They must ensure that the site is safeguarded against all forms of threat. Items of heritage value are not often considered in most disaster management plans therefore there is the need to consider heritage as priority just as the protection of lives and property.

Subtractive and additive manufacturing technology in moulding industry

This report is a review of additive and subtractive manufacturing techniques. This approach (additive manufacturing) has resided largely in the prototyping realm, where the methods of producing complex freeform solid objects directly from a computer model without part-specific tooling or knowledge. But these technologies are evolving steadily and are beginning to encompass related systems of material addition, subtraction, assembly, and insertion of components made by other processes. Furthermore, these various additive processes are starting to evolve into rapid manufacturing techniques for mass-customized products, away from narrowly defined rapid prototyping. Taking this idea far enough down the line, and several years hence, a radical restructuring of manufacturing could take place. Manufacturing itself would move from a resource base to a knowledge base and from mass production of single use products to mass customized, high value, life cycle products, majority of research and development was focused on advanced development of existing technologies by improving processing performance, materials, modelling and simulation tools, and design tools to enable the transition from prototyping to manufacturing of end use parts.

Measurability characteristics mapping for large volume metrology instruments selection

Measurement and verification of products and processes during the early design is attracting increasing interest from high value manufacturing industries. Measurement planning is deemed as an effective means to facilitate the integration of the metrology activity into a wider range of production processes. However, the literature reveals that there are very few research efforts in this field, especially regarding large volume metrology. This paper presents a novel approach to accomplish instruments selection, the first stage of measurement planning process, by mapping measurability characteristics between specific measurement assignments and instruments.

Mechanochemistry for Active Materials and Devices

The coupling of mechanical stress fields in polymers to covalent chemistry (polymer mechanochemistry) has provided access to previously unattainable chemical reactions and polymer transformations. In the bulk, mechanochemical activation has been used as the basis for new classes of stress-responsive polymers that demonstrate stress/strain sensing, shear-induced intermolecular reactivity for molecular level remodeling and self-strengthening, and the release of acids and other small molecules that are potentially capable of triggering further chemical response. The potential utility of polymer mechanochemistry in functional materials is limited, however, by the fact that to date, all reported covalent activation in the bulk occurs in concert with plastic yield and deformation, so that the structure of the activated object is vastly different from its nascent form. Mechanochemically activated materials have thus been limited to “single use” demonstrations, rather than as multi-functional materials for structural and/or device applications. Here, we report that filled polydimethylsiloxane (PDMS) elastomers provide a robust elastic substrate into which mechanophores can be embedded and activated under conditions from which the sample regains its original shape and properties. Fabrication is straightforward and easily accessible, providing access for the first time to objects and devices that either release or reversibly activate chemical functionality over hundreds of loading cycles.

While the mechanically accelerated ring-opening reaction of spiropyran to merocyanine and associated color change provides a useful method by which to image the molecular scale stress/strain distribution within a polymer, the magnitude of the forces necessary for activation had yet to be quantified. Here, we report single molecule force spectroscopy studies of two spiropyran isomers. Ring opening on the timescale of tens of milliseconds is found to require forces of ~240 pN, well below that of previously characterized covalent mechanophores. The lower threshold force is a combination of a low force-free activation energy and the fact that the change in rate with force (activation length) of each isomer is greater than that inferred in other systems. Importantly, quantifying the magnitude of forces required to activate individual spiropyran-based force-probes enables the probe behave as a “scout” of molecular forces in materials; the observed behavior of which can be extrapolated to predict the reactivity of potential mechanophores within a given material and deformation.

We subsequently translated the design platform to existing dynamic soft technologies to fabricate the first mechanochemically responsive devices; first, by remotely inducing dielectric patterning of an elastic substrate to produce assorted fluorescent patterns in concert with topological changes; and second, by adopting a soft robotic platform to produce a color change from the strains inherent to pneumatically actuated robotic motion. Shown herein, covalent polymer mechanochemistry provides a viable mechanism to convert the same mechanical potential energy used for actuation into value-added, constructive covalent chemical responses. The color change associated with actuation suggests opportunities for not only new color changing or camouflaging strategies, but also the possibility for simultaneous activation of latent chemistry (e.g., release of small molecules, change in mechanical properties, activation of catalysts, etc.) in soft robots. In addition, mechanochromic stress mapping in a functional actuating device might provide a useful design and optimization tool, revealing spatial and temporal force evolution within the actuator in a way that might also be coupled to feedback loops that allow autonomous, self-regulation of activity.

In the future, both the specific material and the general approach should be useful in enriching the responsive functionality of soft elastomeric materials and devices. We anticipate the development of new mechanophores that, like the materials, are reversibly and repeatedly activated, expanding the capabilities of soft, active devices and further permitting dynamic control over chemical reactivity that is otherwise inaccessible, each in response to a single remote signal.

UPTAKE OF THE PERIODIC HEALTH EXAM AMONG ADULTS WITH INTELLECTUAL AND DEVELOPMENTAL DISABILITIES FROM 2003 TO 2015

Background: Over the past decade, annual heath exams have been de-emphasized for the general population but emphasized for adults with intellectual and developmental disabilities (IDD). The purpose of this project was to determine if there has been an increase in the uptake of the health exam among adults with IDD in Ontario, to what extent, and the effect on the quality of preventive care provided. Methods: Using administrative health data, the proportion of adults (18-64 years old) with IDD who received a health exam (long appointment, general assessment, and “true” health exam), a high value on the primary care quality composite score (PCQS), and a health exam or high PCQS each year was compared to the proportion in a propensity score matched sample of the general population. Negative binomial and segmented negative binomial regression controlling for age and sex were used to determine the relative risk of having a health exam/high PCQS/health exam or PCQS over time. Results: Pre joinpoint, the long appointment and general assessment health exam definitions saw a decrease and the “true” health exam saw an increase in the likelihood of adults having a health exam. Post joinpoint, all health exam definitions saw a decrease in the likelihood of adults having a health exam. Pre joinpoint, all PCQS measures (high PCQS, long appointment or high PCQS, “true” health exam or high PCQS) saw an increase in the likelihood for adults to achieve a high PCQS or high PCQS/have a health exam. Post joinpoint, all PCQS measures saw a decrease in the likelihood for adults to achieve a high PCQS or high PCQS/have a health exam. Achieving a high PCQS was strongly associated with having a health exam regardless of health exam definition or IDD status. Conclusions: Despite the publication of guidelines, only a small proportion of adults with IDD are receiving health exams. This indicates that the publication of guidelines alone was not sufficient to change practice. More targeted measures, such as the implementation of an IDD-specific health exam fee code, should be considered to increase the uptake of the health exam among adults with IDD.

An exploration of students’ perceptions and attitudes towards creativity in engineering education

This study used a mixed methods approach to develop a broad and deep understanding of students’ perceptions towards creativity in engineering education. Studies have shown that students’ attitudes can have an impact on their motivation to engage in creative behavior. Using an ex-post facto independent factorial design, attitudes of value towards creativity, time for creativity, and creativity stereotypes were measured and compared across gender, year of study, engineering discipline, preference for open-ended problem solving, and confidence in creative abilities. Participants were undergraduate engineering students at Queen’s University from all years of study. A qualitative phenomenological methodology was adopted to study students’ understandings and experiences with engineering creativity. Eleven students participated in oneon- one interviews that provided depth and insight into how students experience and define engineering creativity, and the survey included open-ended items developed using the 10 Maxims of Creativity in Education as a guiding framework. The findings from the survey suggested that students had high value for creativity, however students in fourth year or higher had less value than those in other years. Those with preference for open-ended problem solving and high confidence valued creative more than their counterparts. Students who preferred open-ended problem solving and students with high confidence reported that time was less of a hindrance to their creativity. Males identified more with creativity stereotypes than females, however overall they were both low. Open-ended survey and interview results indicated that students felt they experienced creativity in engineering design activities. Engineering creativity definitions had two elements: creative action and creative characteristic. Creative actions were associated with designing, and creative characteristics were predominantly associated with novelty. Other barriers that emerged from the qualitative analysis were lack of opportunity, lack of assessment, and discomfort with creativity. It was concluded that a universal definition is required to establish clear and aligned understandings of engineering creativity. Instructors may want to consider demonstrating value by assessing creativity and establishing clear criteria in design projects. It is recommended that students be given more opportunities for practice through design activities and that they be introduced to design and creative thinking concepts early in their engineering education.

The Southern Ocean and South Pacific Region

The Region comprises three sub-regions (FAO Statistical Areas) with very different characteristics. The South Pacific includes the vast and virtually unpopulated Southern Ocean surrounding the Antarctic. It has the world’s largest fisheries off Peru and Chile and some of the world’s best managed fisheries in Australia and New Zealand. The Region has over 27% of the world’s ocean area and over 98% of the Region’s total area of 91 million km2 is ‘open ocean’. The Region contains less than 5% of the global continental shelf area and only a fraction of this area is covered by three large marine ecosystems (the New Zealand Shelf, the Humboldt Current and the Antarctic large marine ecosystems (LMEs). The Humboldt Current System (HCS) is the world’s largest upwelling which provides nutrients for the world’s largest fisheries. The Region also has a high number of seamounts. The marine capture fisheries of the Region produce over 13 million tons annually and an expanding aquaculture industry produces over 1.5 million tons. Peru’s anchoveta fishery provides about half the world’s supply of fish meal and oil, key ingredients of animal and fish feeds. El Niño Southern Oscillations (ENSOs), known more generally as El Niños, can substantially change the species composition of the key small pelagic catches (anchovy, sardine, horse mackerel and jack mackerel) causing production to fluctuate from about 4-8 million tons. Partly due to the lack of upwelling and shelf areas, fisheries production in the Southern Ocean and Area 81 is relatively small but supports economically important commercial and recreational fisheries and aquaculture in New Zealand and in New South Wales (Australia). Krill remains a major underexploited resource, but is also a keystone species in the Antarctic food web. The Region is home to numerous endangered species of whales, seals and seabirds and has a high number of seamounts, vulnerable ecosystems fished for high-value species such as orange roughy.

The Southern Ocean and South Pacific Region

The Region comprises three sub-regions (FAO Statistical Areas) with very different characteristics. The South Pacific includes the vast and virtually unpopulated Southern Ocean surrounding the Antarctic. It has the world’s largest fisheries off Peru and Chile and some of the world’s best managed fisheries in Australia and New Zealand. The Region has over 27% of the world’s ocean area and over 98% of the Region’s total area of 91 million km2 is ‘open ocean’. The Region contains less than 5% of the global continental shelf area and only a fraction of this area is covered by three large marine ecosystems (the New Zealand Shelf, the Humboldt Current and the Antarctic large marine ecosystems (LMEs). The Humboldt Current System (HCS) is the world’s largest upwelling which provides nutrients for the world’s largest fisheries. The Region also has a high number of seamounts. The marine capture fisheries of the Region produce over 13 million tons annually and an expanding aquaculture industry produces over 1.5 million tons. Peru’s anchoveta fishery provides about half the world’s supply of fish meal and oil, key ingredients of animal and fish feeds. El Niño Southern Oscillations (ENSOs), known more generally as El Niños, can substantially change the species composition of the key small pelagic catches (anchovy, sardine, horse mackerel and jack mackerel) causing production to fluctuate from about 4-8 million tons. Partly due to the lack of upwelling and shelf areas, fisheries production in the Southern Ocean and Area 81 is relatively small but supports economically important commercial and recreational fisheries and aquaculture in New Zealand and in New South Wales (Australia). Krill remains a major underexploited resource, but is also a keystone species in the Antarctic food web. The Region is home to numerous endangered species of whales, seals and seabirds and has a high number of seamounts, vulnerable ecosystems fished for high-value species such as orange roughy.

Discrimination of honey of different floral origins by a combination of various chemical parameters

Abstract Honey is a high value food commodity with recognized nutraceutical properties. A primary driver of the value of honey is its floral origin. The feasibility of applying multivariate data analysis to various chemical parameters for the discrimination of honeys was explored. This approach was applied to four authentic honeys with different floral origins (rata, kamahi, clover and manuka) obtained from producers in New Zealand. Results from elemental profiling, stable isotope analysis, metabolomics (UPLC-QToF MS), and NIR, FT-IR, and Raman spectroscopic fingerprinting were analyzed. Orthogonal partial least square discriminant analysis (OPLS-DA) was used to determine which technique or combination of techniques provided the best classification and prediction abilities. Good prediction values were achieved using metabolite data (for all four honeys, Q² = 0.52; for manuka and clover, Q² = 0.76) and the trace element/isotopic data (for manuka and clover, Q² = 0.65), while the other chemical parameters showed promise when combined (for manuka and clover, Q² = 0.43).

Waste Not, Want Not: Managing Perishables in Small and Medium Retail Enterprises

Purpose of this paper:
Recent literature indicates that around one third of perishable products finish as waste (Mena et al., 2014): 60% of this waste can be classified as avoidable (EC, 2010) suggesting logistics and operational inefficiencies along the supply chain. In developed countries perishable products are predominantly wasted in wholesale and retail (Gustavsson et al., 2011) due to customer demand uncertainty the errors and delays in the supply chain (Fernie and Sparks, 2014). While research on logistics of large retail supply chains is well documented, research on retail small and medium enterprises’ (SMEs) capabilities to prevent and manage waste of perishable products is in its infancy (c.f. Ellegaard, 2008) and needs further exploration. In our study, we investigate the retail logistics practice of small food retailers, the factors that contribute to perishable products waste and the barriers and opportunities of SMEs in retail logistics to preserve product quality and participate in reverse logistics flows.

Design/methodology/approach:
As research on waste of perishable products for SMEs is scattered, we focus on identifying key variables that contribute to the creation of avoidable waste. Secondly we identify patterns of waste creation at the retail level and its possibilities for value added recovery. We use explorative case studies (Eisenhardt, 1989) and compare four SMEs and one large retailer that operate in a developed market. To get insights into specificities of SMEs that affect retail logistics practice, we select two types of food retailers: specialised (e.g. greengrocers and bakers) and general (e.g. convenience store that sells perishable products as a part of the assortment)

Findings:
Our preliminary findings indicate that there is a difference between large retailers and SME retailers in factors that contribute to the waste creation, as well as opportunities for value added recovery of products. While more factors appear to affect waste creation and management at large retailers, a small number of specific factors appears to affect SMEs. Similarly, large retailers utilise a range of practices to reduce risks of product perishability and short shelf life, manage demand, and manage reverse logistics practices. Retail SMEs on the other hand have limited options to address waste creation and value added recovery. However, our findings show that specialist SMEs could successfully minimize waste and even create possibilities for value added recovery of perishable products. Data indicates that business orientation of the SME, the buyersupplier relationship, and an extent of adoption of lean principles in retail coupled with SME resources, product specific regulations and support from local authorities for waste management or partnerships with other organizations determine extent of successful preservation of a product quality and value added recovery.

Value:
Our contribution to the SCM academic literature is threefold: first, we identify major factors that contribute to the generation waste of perishable products in retail environment; second, we identify possibilities for value added recovery for perishable products and third, we present opportunities and challenges for SME retailers to manage or participate in activities of value added recovery. Our findings contribute to theory by filling a gap in the literature that considers product quality preservation and value added recovery in the context of retail logistics and SMEs.

Research limitations/implications:
Our findings are limited to insights from five case studies of retail companies that operate within a developed market. To improve on generalisability, we intend to increase the number of cases and include data obtained from the suppliers and organizations involved in reverse logistics flows (e.g. local authorities, charities, etc.).

Practical implications:
With this paper, we contribute to the improvement of retail logistics and operations in SMEs which constitute over 99% of business activities in UK (Rhodes, 2015). Our findings will help retail managers and owners to better understand the possibilities for value added recovery, investigate a range of logistics and retail strategies suitable for the specificities of SME environment and, ultimately, improve their profitability and sustainability.