Evaluation of different foliar fertilizers on the crop production of sugarcane

Influence of different foliar fertilizers (phosphite, micronutrients, biostimulant, phosphite + micronutrients, phosphite + biostimulant, micronutrients + biostimulant and phosphite + micronutrients + biostimulant) on yield of sugarcane was evaluated after fertilization at 30, 90 and 150 days after harvesting two-year-old sugarcane. The experiment was carried out in a commercial crop employing a randomized block design in four replicates. Higher stalk masses were observed for fertilization at 30 days after harvest, and the higher content of sucrose, total recoverable sugar and Brix degrees were observed for sugarcane fertilized after 150 days. Statistical analysis (Duncan's test) revealed no significant variation (P & 0.05) in Brix degree, sucrose content and total recoverable sugar. For total recoverable sugar x stalk weight (the main payment type for sugarcane producers), the following sequence (time treatment, fertilizer composition) 30-days, micronutrient + biostimulant; 150-days, biostimulant; and 90-days, biostimulant increased 11%, 17%, and 21% the yield of sugarcane. © 2013 Copyright Taylor and Francis Group, LLC.

Structural changes in soybean seed coat due to harvest time and storage

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Platelet lysate 3D scaffold supports mesenchymal stem cell chondrogenesis: An improved approach in cartilage tissue engineering

Articular lesions are still a major challenge in orthopedics because of cartilage's poor healing properties. A major improvement in therapeutics was the development of autologous chondrocytes implantation (ACI), a biotechnology-derived technique that delivers healthy autologous chondrocytes after in vitro expansion. To obtain cartilage-like tissue, 3D scaffolds are essential to maintain chondrocyte differentiated status. Currently, bioactive 3D scaffolds are promising as they can deliver growth factors, cytokines, and hormones to the cells, giving them a boost to attach, proliferate, induce protein synthesis, and differentiate. Using mesenchymal stem cells (MSCs) differentiated into chondrocytes, one can avoid cartilage harvesting. Thus, we investigated the potential use of a platelet-lysate-based 3D bioactive scaffold to support chondrogenic differentiation and maintenance of MSCs. The MSCs from adult rabbit bone marrow (n=5) were cultivated and characterized using three antibodies by flow cytometry. MSCs (1×105) were than encapsulated inside 60μl of a rabbit platelet-lysate clot scaffold and maintained in Dulbecco's Modified Eagle Medium Nutrient Mixture F-12 supplemented with chondrogenic inductors. After 21 days, the MSCs-seeded scaffolds were processed for histological analysis and stained with toluidine blue. This scaffold was able to maintain round-shaped cells, typical chondrocyte metachromatic extracellular matrix deposition, and isogenous group formation. Cells accumulated inside lacunae and cytoplasm lipid droplets were other observed typical chondrocyte features. In conclusion, the usage of a platelet-lysate bioactive scaffold, associated with a suitable chondrogenic culture medium, supports MSCs chondrogenesis. As such, it offers an alternative tool for cartilage engineering research and ACI. © 2013 Informa UK Ltd.

Effect of chemical modifications on the electronic structure of poly(3-hexylthiophene)

The widespread use of poly(3-hexylthiophene) (P3HT) in the active layers of organic solar cells indicates that it possesses chemical stability and solubility suitable for such an application. However, it would be desirable to have a material that can maintain these properties but with a smaller bandgap, which would lead to more efficient energy harvesting of the solar spectrum. Fifteen P3HT derivatives were studied using the Density Functional Theory. The conclusion is that it is possible to obtain compounds with significantly smaller bandgaps and with solubility and stability similar to that of P3HT, mostly through the binding of oxygen atoms or conjugated organic groups to the thiophenic ring. © 2013 Wiley Periodicals, Inc.

Nutrient accumulation in 'Fantasy' net melon cultivated on substrate

Knowledge of the most essential nutrients for plant growth facilitates the efficient handling of its nutrition, especially when they are grown on a substrate supported by fertigation. The objective of this study was to determine the accumulation of nutrients in net melon grown on a substrate and understand the relationship between mineral nutrition and plant growth. The Fantasy hybrid was cultivated in pots containing a substrate consisting of a mixture of sand and peanut shells (ratio, 1:1). Determination of nutrient accumulation was performed in 6 seasons. The substrate was chemically characterized before and after cultivation. Harvesting occurred 78 days after transplantation, resulting in an average yield of 70,120 kg·ha-1. Substrate analysis showed a small increase in nutrient levels by the end of cultivation. The order of nutrient accumulation was as follows: N>Ca>K>P>Mg>S>B> Fe>Mn>Zn>Cu.

Flutuação populacional e infestação de mosca-das-frutas (Diptera: Tephritidae) em função do sistema produtivo de goiaba

The knowledge about population fluctuation of fruit flies (Diptera: Tephritidae) is an important tool to be adopted in pest control. Thus, this research aimed to analyse the population fluctuation of adults of fruit flies and the infestation of larvae in fruits depending on the conventional and organic agricultural systems of guava production in the 2010/2011 harvest. For monitoring the adults of fruit flies, five yellow sticky traps were installed in each system. The infestation percentage and the calculation of the ratio number of larvae/number of fruits were determined at harvest by harvesting 10 mature fruits/plant, in ten plants, for each system. In organic system predominated Anastrepha spp., principally in the period when the fruits were ripening or ripe, represented by elevated infestation percentage, while the conventional system presented low population density of fruit flies, with reduced larvae infestation inside the fruits.

Clinical similarities and histological diversity comparing fresh frozen onlay bone blocks allografts and autografts in human maxillary reconstruction

Background: In the absence of autologous bone for harvesting, fresh-frozen bone allografts turned into an alternative for bone reconstruction procedures. Purpose: The purpose of this study was to make a histological analysis of fresh-frozen onlay bone allografts (ALs), compared with autografts, in patients who needed maxillary reconstruction prior to dental implants placement. Materials and Methods: Twelve patients with bone deficiencies (width inferior to 4mm) in the sites where the implants were planned were enrolled in the study. From these, six were elected to be treated with autogenous (AT) bone grafts and six with fresh-frozen bone AL. This last group included the patients who had absence of a convenient amount of bone in donor sites. Each patient received from one to six graft blocks, totalling to 12 ATs and 17 ALs. Seven months after grafting procedures, biopsies of the grafts were made using 2-mm internal diameter trephine burs, and processed for histological analysis. One biopsy was retrieved from each patient. Results: Clinically, all grafts were found to be firm in consistency and well-incorporated to the receptor bed. Histological analysis showed a large amount of necrotic bone surrounded by few spots of new-formed bone in the AL group, suggesting low rate of graft remodeling. In the AT group, an advanced stage of bone remodeling was seen. Conclusions: Human fresh-frozen bone block AL showed clinical compatibility for grafting procedures, although associated to slow remodeling process. Further studies are needed to define, at long term, the remodeling process chronology the clinical longitudinal results for fresh-frozen bone AL. Copyright © 2013 Wiley Periodicals, Inc.

A non-ideal portal frame energy harvester controlled using a pendulum

A model of energy harvester based on a simple portal frame structure is presented. The system is considered to be non-ideal system (NIS) due to interaction with the energy source, a DC motor with limited power supply and the system structure. The nonlinearities present in the piezoelectric material are considered in the piezoelectric coupling mathematical model. The system is a bi-stable Duffing oscillator presenting a chaotic behavior. Analyzing the average power variation, and bifurcation diagrams, the value of the control variable that optimizes power or average value that stabilizes the chaotic system in the periodic orbit is determined. The control sensitivity is determined to parametric errors in the damping and stiffness parameters of the portal frame. The proposed passive control technique uses a simple pendulum to tuned to the vibration of the structure to improve the energy harvesting. The results show that with the implementation of the control strategy it is possible to eliminate the need for active or semi active control, usually more complex. The control also provides a way to regulate the energy captured to a desired operating frequency. © 2013 EDP Sciences and Springer.

Sistemas de manejo e efeito residual do potássio na produtividade e nutrição do feijão-caupi

Cowpea [Vigna unguiculata (L) Walp] have great social and economic importance for the Para State. It grows well in areas with low precipitation and two crop cycles can be obtained annually. This study aimed to assess the effect of the residual fertilization from a previous culture (Sorghum bicolor L. Moench) and crop systems on cowpea yield and macronutrient concentration on leaves of three cowpea cultivars (BRSMilênio, BRS-Urubuquara e BRS-Guariba). The study was conducted at the UFRA. The treatments were two crop systems (minimum tillage and conventional), four levels of potassium (50, 100, 200 e 300 kg de KCl ha-1 applied to a previous sorghum culture) and the three cowpea cultivars. Treatments were organized as a three (4 x 2 x 3) factor experiment on a randomized complete block design. The soil was a yellow latosol. In each experiment plot five plants were selected to determine shoot dry matter and foliar nutrient concentration. Grain yield was determined after harvesting all plants on the experiment plot. The residual KCl fertilization affected foliar nutrient content, but did not affect shoot dry mass or yield of grain. Yield was higher in the minimum tillage system. Highest yield (1590 kg ha-1) was recorded int the cv. 'Guariba' when 100 kg of KCl ha-1 had been used in the previous crop. The highest content of leaf N and K was found in cowpea under minimum tillage system. The amount of P and Mg were higher in the conventional system whereas the amount of Ca did not change.

Sustainable production of biologically active molecules of marine based origin

The marine environment offers both economic and scientific potential which are relatively untapped from a biotechnological point of view. These environments whilst harsh are ironically fragile and dependent on a harmonious life form balance. Exploitation of natural resources by exhaustive wild harvesting has obvious negative environmental consequences. From a European industry perspective marine organisms are a largely underutilised resource. This is not due to lack of interest but due to a lack of choice the industry faces for cost competitive, sustainable and environmentally conscientious product alternatives. Knowledge of the biotechnological potential of marine organisms together with the development of sustainable systems for their cultivation, processing and utilisation are essential. In 2010, the European Commission recognised this need and funded a collaborative RTD/SME project under the Framework 7-Knowledge Based Bio-Economy (KBBE) Theme 2 Programme 'Sustainable culture of marine microorganisms, algae and/or invertebrates for high value added products'. The scope of that project entitled 'Sustainable Production of Biologically Active Molecules of Marine Based Origin' (BAMMBO) is outlined. Although the Union is a global leader in many technologies, it faces increasing competition from traditional rivals and emerging economies alike and must therefore improve its innovation performance. For this reason innovation is placed at the heart of a European Horizon 2020 Strategy wherein the challenge is to connect economic performance to eco performance. This article provides a synopsis of the research activities of the BAMMBO project as they fit within the wider scope of sustainable environmentally conscientious marine resource exploitation for high-value biomolecules. © 2013 Elsevier B.V.

Sugarcane vinasse: Environmental implications of its use

The inadequate and indiscriminate disposal of sugarcane vinasse in soils and water bodies has received much attention since decades ago, due to environmental problems associated to this practice. Vinasse is the final by-product of the biomass distillation, mainly for the production of ethanol, from sugar crops (beet and sugarcane), starch crops (corn, wheat, rice, and cassava), or cellulosic material (harvesting crop residues, sugarcane bagasse, and wood). Because of the large quantities of vinasse produced, alternative treatments and uses have been developed, such as recycling of vinasse in fermentation, fertirrigation, concentration by evaporation, and yeast and energy production. This review was aimed at examining the available data on the subject as a contribution to update the information on sugarcane vinasse, from its characteristics and chemical composition to alternatives uses in Brazil: fertirrigation, concentration by evaporation, energy production; the effects on soil physical, chemical and biological properties; its influence on seed germination, its use as biostimulant and environmental contaminant. The low pH, electric conductivity, and chemical elements present in sugarcane vinasse may cause changes in the chemical and physical-chemical properties of soils, rivers, and lakes with frequent discharges over a long period of time, and also have adverse effects on agricultural soils and biota in general. Thus, new studies and green methods need to be developed aiming at sugarcane vinasse recycling and disposal. © 2013 Elsevier Ltd. All rights reserved.

Produtividade e perdas de amendoim em cinco diferentes datas de arranquio

The harvest is a critical time in the production of the peanut (Arachis hypogaea L.), however in this operation losses are inevitable, in some cases o f up to 30% of production. Peanuts are grown for a short period during the reform of the sugarcane fields, providing better usage of the agricultural spaces in Jaboticabal, São Paulo. The objective of this research was to see how early the peanuts could be dug up once they are seen to have matured. The peanuts were dug up at 120, 125, 130, 135 and 140 days after sowing. Results were subjected to variance analysis by the F-test, and when there was significance of the averages, the Tukey test at 5% probability was applied, using a box plot for the following variables: maturation, moisture content of pods and soil, mechanical resistance of soil to penetration, harvest loss and productivity. The box plot proved efficient in the univariate evaluation of the analyzed variables, creating excellent conditions for viewing their behavior. Digging up the peanuts at 120 DAS is recommended.

Can overharvesting of a non-timber-forest-product change the regeneration dynamics of a tropical rainforest? The case study of Euterpe edulis

The exploitation of non-timber forest products is often considered a low-impact activity in tropical forests. However, assessments of the impacts of such activity are mostly focused on the harvested species and not on the plant community, thus limiting our understanding for establishing forest management recommendations. We investigated the consequences of Euterpe edulis palm heart harvesting on the seed rain in the Brazilian Atlantic rainforest. We compared the density of E. edulis individuals, as well as the density of E. edulis seeds, and the density, richness and functional composition of seed rain of the whole plant community, before and after palm heart harvesting in a 10 ha permanent plot. This assessment was carried out in preserved (typical old-growth Atlantic rainforest) and in disturbed (more open habitat dominated by the native bamboo Guadua tagoara) forest patches. Palm harvesting reduced the E. edulis population from 202.16 to 25.67 ind/ha and its seed rain density from 0.362 to 0.3 seeds/m2 and from 2.395 to 0.15 seeds/m2 in preserved and disturbed forest patches, respectively. Seed density of light-dependent climbers, pioneer trees, bamboo and animal-dispersed seeds increased after palm harvesting, especially in the disturbed forest patches, where palm harvesting was more intense and may have changed the light regime of the understory. On the other hand, species richness of the plant community declined by half. We observed a remarkable decline in the number of animal-dispersed species, especially for those with large seeds, suggesting that the activity of seed dispersers, including many species attracted by E. edulis fruits, was reduced. Therefore, harvesting of E. edulis palm heart may change the regeneration dynamics of the Atlantic rainforest, both due to shifts in forest structure, mediated by the removal of individuals from the forest canopy, and in community functioning, mediated by the interference on the activity of seed dispersers. © 2013 Elsevier B.V. All rights reserved.

Stocking density of Nile tilapia in cages placed in a hydroelectric reservoir

The Brazilian government has been encouraging fish farming in cages in federal water bodies, including hydroelectric reservoirs. Despite the government support, it is a new activity and the production model still needs some adjustment to reduce the production costs and achieve sustainability. The aims of this study were to determine the appropriate stocking density of Nile tilapia in cages in a hydroelectric reservoir and to evaluate to what extent fish size selection could improve their uniformity. Twelve cages (6m3) were placed at the Fish Farmers' Cooperative of Santa Fé do Sul and Region, Ilha Solteira reservoir, São Paulo, Brazil (20°12'10″S, 50°58'31.15″W). In stage I (initial fish weight, 78g), four stocking densities were tested: D1-800, D2-2000, D3-2500 and D4-3000 fish/cage, with three replicates. At the end of this stage (average fish weight, 255g), the fish were selected into three sizes, except for D1. In stage II, four stocking densities were tested, designed to obtain the following final production: D1-100kg/m3 (800 non-selected fish/cage), D2-80kg/m3 (600 fish/cage), D3-100kg/m3 (800 fish/cage) and D4-120kg/m3 (900 fish/cage). The trial ended when the fish weighed 800g. By reducing the initial stocking density from 2500 to 800 tilapia juveniles per cage, there was no need for selection. The growth performance was higher, the feed conversion rate was better and the time taken to reach harvesting was shorter. Consequently, the production cost reduced and the operating profit increased. Using the lowest initial stocking density, the risk of disease outbreak was also lower, and there was no need to use drugs for disease control since the mortality rate and occurrences of disease and deformity decreased and the dissolved oxygen level inside the cages was higher. © 2013 Elsevier B.V.

Produção de etanol a partir de mosto hidrolisado hemicelulósico de ponta e palha de cana-de-açúcar

Pós-graduação em Microbiologia Agropecuária - FCAV