Estudo da influência do lineamento Tibagi e Sinclinal de Torres na estruturação da porção norte da bacia de Pelotas

The area of this work is located along the Northern portion of the Pelotas´s basin. The onshore region extends from the Southern portion São Paulo State to the North of Rio Grande do Sul State, with a total area of 440 530 km ². The objective of the research is to characterize the main geological structures of the outcropping basement in the Paraná Basin and its correlation with the offshore portion of the Pelotas Basin. The characterization was performed through the integration of surface (SRTM images and outcrops) and subsurface data (seismic data and well logs), the method includes the use of remote sensing techniques and seismic interpretation. The main structures to be analyzed are the Tibagi Lineament and the “Torres Syncline in order to verify its influence on the geological evolution and deformation of the basin. As result, it was identified the continuity of the both structures inside the offshore basin (Pelotas Basin); but only the Tibagi Lineament represents an important structural feature in the offshore basin. In this sense, the Tibagi lineament shows a NW-SE direction along the both basins (Pelotas and Paraná) and it is defined by drainages and relief on the continental portion. It was classified as a graben structure limited by normal faults and it also was verified a trend of faults inside the lineament that cuts all the sedimentary package of Itararé Group from Paraná Basin. The Torres syncline is a structure that connects the arches of Ponta Grossa and Rio Grande, showing NW-SE orientation and a low angle dip in the NW direction. Its projection into the Pelotas Basin was not recognized by the methods applied in this work, because a preliminary analyze indicates that its projection corresponds to a structural high inside the Pelotas Basin

Evolução da tectônica rúptil no nordeste do Brasil baseada na termocronologia por traço de fissão em apatita

Results of apatite fission tracks from twelve samples collected across a Borborema Province transect, northeastern Brazil, revealed two major paleothermal events: a cooling event occurred between Albian and late Cenomanian (110 - 80 Ma) and a second cooling event starting on early Paleocene (66 Ma). Given the wide expression of the studied area (sampling trend along four brazilian states) a correlation between the distribution of fission track data and the current geological / geomorphological scenario was made possible, considering the area’s tectono - stratigraphic past and its thermochronologic evolution until now. The fact that the employed thermochronologic tool relates to a relatively shallow geothermometer, substancially information for understanding the behavior of basement brittle tectonic was achieved. These data were used to analyze faults origin and reactivation, associated with sedimentary basins evolution in the context of South America - Africa continental breakup.

Caracterização dos reservatórios do grupo Macaé no Campo de Garoupa - Bacia de Campos - por meio de interpretação sísmica e perfis de poço

The study area is the Garoupa Field, located 75 km from the coast of Rio de Janeiro in bathymetric elevation of 125 m and it is the first important offshore discovery of the Campos Basin with hydrocarbon production in the Albian carbonates. The high significance of carbonate rock reservoirs for the global oil industry and its degree of complexity, combined with the fact that the Garoupa Field is a mature field, make this research project interesting to develop a re-exploratory vision of the study area. The objective of this paper is to characterize the physical properties of the Macae Group reservoirs in the Garoupa Field through well correlation techniques, petrophysical analysis and seismic interpretation (3D), in order to evaluate qualitatively and quantitatively the response of geophysical data to the presence of carbonate rock reservoirs. From the analysis of well profiles (gamma ray, resistivity, density and sonic) it was possible to identify six reservoir levels in the Quissamã Formation. As a result, the reservoirs have good correlation between the wells in the Garoupa Field and show lateral facies variation. In the seismic interpretation, structural contour maps were generated in time (ms) from the top of the Macae Group and two horizons that correspond to the reservoir levels. These maps show that the oil producing area of this field is a structural high located at the west of the interpreted seismic cube, and it was classified as a rollover limited by lateral faults forming a horst. The seismic attribute maps show a good response to the reservoirs of the Garoupa Field because they are associated with amplitude anomalies, verified by the correlation between the physical properties of the reservoir rock and seismic data through cross plots, with emphasis in a linear correlation between the resistivity profile and the values of Maximum Absolute Amplitude and RMS Amplitude attributes

Geologia da região da Fazenda Salobo, Vazante - MG

Important deposits of Zn-Pb associated with the Vazante Group, and Au in Group Canastra occur in the Vazante-Paracatu region (MG). They are located in the Brasília Fold Belt, which was generated from a convergent tectonic in the Brasiliano cycle, forming a complex system of imbricated nappes and faults. This study aims to characterize stratigraphic, structural and metamorphic aspects of an area, located in the Salobo’s farm region. A geological mapping in 1:20,000 scale was executed in order to identify the outcropping lithotypes and to collect structural measures. Drill holes were described to support the surface data and samples were selected for the preparation of thin and polished sections. In this context, the occurrence of rock types and hydrothermal processes that had not been previously described were found, for example layers of phosphatic quartzite in the Serra do Poço Verde Formation (SPV), hydrothermal hematites from martitization magnetite in contact by detachment of the Serra do Garrote Formation and SPV in the Vazante Group and layers of microbanded iron formations in Paracatu Formation (Canastra Group). In the area, four deformational phases were recognized, occurring progressively, in which two of them are related to convergent tectonic, with the development of thrust faults, one is associated to tectonic escape and/or reactivation of basement faults and the last has a distensive character, representing the post-convergence relaxation. The metamorphism in the area was subgreenschist facies, reaching lower greenschist, with temperatures up to 350°C

Investigação sobre deformação neotectônica no lineamento Guapiara, região de Ourinhos, Fartura-SP e Santo Antonio da Platina - PR

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo do reservatório de coquinas do grupo Lagoa Feia (Eocretáceo) na acumulação de Linguado, sudoeste da Bacia de Campos

The Linguado Field is located in the extreme southwest portion of Campos Basin. It’s associated with Structural Badejo High and can be divided in two groups of faults: one manly formed by antithetic faults, with NW-SE direction, continuous to Badejo Fault, and another identified by N-S faults. Besides these faults had affected the basement and the stratification of basin, these systems also had contributed to coquina permoporosity development, that show 80% of recoverable oil volume of the field. The carbonate marine sequence, Albian age, it was deposited under the salt. This forms structures as like as pillows and raft as a result of the halocinese. Structurally the Linguado Field coquina has monoclinal direction with east dip, it’s cut by faults with slip up to 50 meters. In addition to structural control, stratigraphy and diagenesis also were important to carbonate trap oil. The identification of recoverable oil levels in the low phase of the coquina from Lagoa Feia Group was done by well data. The seismic 2D and 3D, with the well data, was used to structural interpretation to regional scale either to reservoir scale.

Proteção de sistemas eletricos industriais: relés e suas aplicações em subestações

Electrical installations in industries involving high currents and voltages considered. On the other side is the common appearance of electrical failures, caused by human error, defects in electrical equipment or electrical installation aging itself. These failures are varied, those with the highest rate of occurrence and cause much damage to electrical installations, are overcurrent and overvoltage. Therefore there is a need to project a system that can detect and minimize possible effects caused by faults in electrical installations industries. Protection systems in electric industries emerge as an alternative to control especially voltage and current magnitudes. Engineered based on the functions of the relays, protection systems are an indispensable tool for any industrial substation. But the project of such systems becomes increasingly more complex, due to technological development. Electrical equipment not develop at the same speed that the protective devices (relays), making it indispensable knowledge of integration of technologies

Estudo do comportamento em fadiga de um tubo de aço API 5CT soldado por resistência elétrica

The oil extraction in deep waters sparked new areas of knowledge, the creation of engineering courses dedicated just to these processes and a wide field of analysisvoiding multiple impacts in case of faults, mainly the economic and environmental. This paper aims to show on the effects and causes of fatigue failure in steel tubes used for oil and gastransportation (linepipe), mainly caused by vortex induced vibrations, or VIV. To make this, through laboratory tests, it found trough the curve Stress versus Number of Cycles, and thus estimating that with a stress value of 350 MPa or less, the fatigue life cycle of the API 5CT T95 (1% Cr) pipe is estimated infinite. It could conclude that the analyzed material has good fatigue failure resistance for offshore use, taking into account only the influence of VIV's, since there are no stress concentrators

Modelo petrofísico 3D do Arenito Namorado no Campo de Namorado - Bacia de Campos, RJ

The Namorado Oil Field represents the beginning of the oil exploration in Brazil, in the 70s, and it is still a subject of researches because the importance of this turbidite sandstone in the brazilian oil production. The Namorado’s production level was denominated “Namorado sandstone”, it is composed by turbidite sandstone deposited during the Albian-Cenomanian. In order to define the structural geometry of the main reservoir, geological and geophysical tools like RECON and Geographix (Prizm – Seisvision) softwares were used, and its application was focused on geological facies analysis, for that propose well logs, seismic interpretation and petrophysical calculations were applied. Along this work 15 vertical wells were used and the facies reservoirs were mapped of along the oil field; it is important to mentioned that the all the facies were calibrated by the correlation rock vs log profile, and 12 reservoir-levels (NA-1, NA-2, NA-3, NA-4, NA-5, NA-6, NA-7, NA-8, NA-9, NA-10, NA-11 e NA-12) were recognized and interpreted. Stratigraphic sections (NE-SW and NW-SE) were also built based on stratigraphic well correlation of each interpreted level, and seismic interpretation (pseudo-3D seismic data) on the southeastern portion of the oil field. As results it was interpreted on two- and three-dimensional maps that the deposition reservoir’s levels are hight controlled by normal faults systems. This research also shows attribute maps interpretation and its relationship with the selection of the reservoir attribute represented on it. Finally the data integration of stratigraphic, geophysical and petrophysical calculations lets us the possibility of obtain a detail geological/petrophysical 3D model of the main reservoir levels of “Namorado sandstone” inside the oil/gás field

As vazões de outorga das bacias hidrográficas dos rios Aguapeí e Peixe

This work presents procedures for getting data to estimate grant flow by means of statistical and hydrological methods, acquired during the graduate course, of some streams in the watersheds of Aguapeí and Peixe rivers, in order to make available this data set to Sao Paulo State water and electrical energy department – DAEE and to the Committees of Aguapeí and Peixe watersheds. This study was performed using discharge data and the were a selection process to identify some faults in the historical series. Finally it was calculated the 7-day moving averages, Q7 and some characteristics discharges like Q90 and Q95. Taking into account the average discharge en seven days in a 10-year recurrence interval, it was estimated the grant flow of some streams. Data were generated for six posts inside the Aguapei and Peixe watersheds

Anteprojeto de um sistema digital de proteção e controle aplicado em uma subestação elétrica industrial

With the growth of the demand on electric energy in the last decades, the urban distribution and transmission systems have experienced a bigger necessity to improve on the substations, the automation procedures and techniques on the operation maneuvers of such systems, in a sense that better attends the quality levels, availability, continuity and operational reliability. In this way, the objective of the present paper is to perform a study of protection and control on an electrical industrial system involving the procedures of digitizing and maneuvers automatism utilizing operational techniques and other pertinent information used in a typical high-voltage Industrial Electrical System. Analysis were made on short-circuits to specify the main components of the 138 [kV] substation, in addition, there were used digital MiCOM relays to make the protection of the present elements. With that, a program was developed to allow the user to monitor the condition of circuit-breakers through a supervision screen being able to simulate some kinds of faults, as well as observing the characteristics of each device. This way, the importance of having a fast and reliable system that ensures the equipment’s protection and the industrial process continuity due to faults on the electrical system is noticeable. It’s important to highlight that all this digitizing was mainly favored by the development of digital technology on the last years, mainly on microelectronics, also with the appearance of supervision gadgets allowing the development of complex systems in supervision and electric energy control

Investigação sobre deformação neotectônica no lineamento Guapiara, região de Guapiara e Jacupiranga

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Evolução tectonossedimentar dos principais reservatórios de hidrocarbonetos do Campo de Golfinho (Bacia do Espírito Santo)

The Golfinho Field is located in the offshore region of the Espírito Santo Basin. Its importance is linked to the current average production about 19,000 barrels of oil per day, in turbidite reservoirs , giving it the nineteenth placement among the largest oil fields producing of Brazil. By interpretation and correlation’s methods based on 2D seismic sections and geophysical well logs, the study of tectonic-sedimentary evolution of major Golfinho Field’s reservoirs, which are located in Maastrichtian , aims understand and characterize the geological model of the area for the purpose of identify the main structures and types of reservoirs, improving the geological understanding of the area and using this knowledge at similar sets, that may present exploratory success in similar cases. By structural contour maps and geological cross-sections generated since time-depth conversion , the results defined for the geological model of the area , two distinct tectonic styles: a distensinal tectonics style , characterized by grabens and horsts , which belongs to rift phase, and a salt tectonics style, characterized by salt domes , listric faults and folds rolllover folds type, which belongs to marine phase . The interpretation of seismic sections and subsequent analysis of the main deformations present in the Maastrichtian reservoirs rocks ( turbidites ) showed that the northern region of the field is the most affected by salt tectonics . As for reservoirs, it was concluded to be associated to tectonics formed by rollover folds type, being older than listric faults

Análise retrospectiva e tendências do serviço de inspeção do estado de São Paulo

Pós-graduação em Medicina Veterinária - FCAV

Pré projeto de uma caçamba compactadora estacionária

This study describes the preliminary design of a static skip compactor and its hydraulic system. The objective of this study is to develop and to improve the design of a made project. The methodology used in this study was to analyze the faults of the already done projects and to suggest possible improvements. The result is a preliminary design of a skip with the main necessary dimensions and specifications to build that equipment. The conclusion of this study is a preliminary project of simple equipment that makes in very efficient way its work