986 resultados para enpresa txiki eta ertainak
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
The control of blood flow during exercise involves different mechanisms, one of which is the activation of the renin-angiotensin system, which contributes to exercise-induced blood flow redistribution. Moreover, although angiotensin II (Ang II) is considered a potent venoconstrictor agonist, little is known about its effects on the venous bed during exercise. Therefore, the present study aimed to assess the Ang II responses in thefemoral vein taken from sedentary and trained rats at rest or subjected to a single bout of exercise immediately before organ bath experiments. Isolated preparations of femoral veins taken from resting-sedentary, exercised-sedentary, resting-trained and exercised-trained animals were studied in an organ bath. In parallel, the mRNA expression of prepro-endothelin-1 (ppET-1), as well as the ETA and ETB receptors, was quantified by real-time PCR in this tissue. The results show that, in the presence of L-NAME, Ang II responses in resting-sedentary animals were higher compared to the other groups. However, this difference disappeared after co-treatment with indomethacin, BQ-123 or BQ-788. Moreover, exercise reduced ppET-1 mRNA expression. These reductions in mRNA expression were more evident in resting-trained animals. In conclusion, either acute or repeated exercise adapts the rat femoral veins, thereby reducing the Ang II responses. This adaptation is masked by the action of locally produced nitric oxide and involves, at least partially, the ETB- mediated release of vasodilator prostanoids. Reductions in endothelin-1 production may also be involved in these exercise-induced modifications of Ang II responses in the femoral vein.
Resumo:
Neste trabalho são apresentados os resultados de caracterização das principais argilas usadas pela indústria cerâmica vermelha regional e, também, de alguns resíduos sólidos produzidos na região de Presidente Prudente - SP. Os resultados da incorporação destes resíduos em massas cerâmicas são avaliados através do estudo de suas propriedades tecnológicas. Para a caracterização dos materiais foram utilizadas as seguintes técnicas: análise textural (concentração das frações areia, silte e argila), difratometria de raios X e análise térmica. As propriedades tecnológicas de corpos de prova cerâmicos foram avaliadas através dos seguintes parâmetros: retração linear (RL), perda de massa ao fogo (PF), massa específica aparente (MEA), porosidade aparente (PA), absorção de água (AA) e resistência mecânica à flexão (RMF). Corpos de prova, com diferentes concentrações de resíduos, foram prensados (prensa uniaxial manual) e queimados em temperaturas que variaram de 800 a 1200 oC, usando um forno tipo mufla com controle de temperatura. As argilas sedimentares foram coletadas nas margens do rio Paraná e em áreas de várzea, próximas as cerâmicas. As amostras estudadas, coletadas nos depósitos das cerâmicas, são usadas para produção de tijolos maciços, blocos furados e telhas. Quatro tipos diferentes de resíduos foram estudados: (1) lodo de estação de tratamento de água ETA, (2) torta de filtro de indústria de re-refino de óleo lubrificante, (3) pó de vidro (soda-cal) de garrafa tipo long neck descartável, e (4) cinza de bagaço de cana. Estes resíduos foram incorporados em massas cerâmicas coletadas nas indústrias... (Resumo completo, clicar acesso eletrônico abaixo)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The production cross section for a Wboson and two b jets is measured using proton-proton collisions at v root s = 7 TeV in a data sample collected with the CMS experiment at the LHC corresponding to an integrated luminosity of 5.0 fb(-1). The W + bbevents are selected in the W..decay mode by requiring a muon with transverse momentum pT> 25GeVand pseudorapidity |eta| < 2.1, and exactly two b-tagged jets with pT> 25GeVand |eta| < 2.4. The measured W + bbproduction cross section in the fiducial region, calculated at the level of final-state particles, is s(pp. W + bb) xB(W..) = 0.53 +/- 0.05 (stat.) +/- 0.09 (syst.) +/- 0.06 (theo.) 0.01 (lum.) pb, in agreement with the standard model prediction. In addition, kinematic distributions of the W + bbsystem are in agreement with the predictions of a simulation usingMadGraphandpythia. (C) 2014 The Authors. Published by Elsevier B. V.
Resumo:
A description is provided of the software algorithms developed for the CMS tracker both for reconstructing charged-particle trajectories in proton-proton interactions and for using the resulting tracks to estimate the positions of the LHC luminous region and individual primary-interaction vertices. Despite the very hostile environment at the LHC, the performance obtained with these algorithms is found to be excellent. For t (t) over bar events under typical 2011 pileup conditions, the average track-reconstruction efficiency for promptly-produced charged particles with transverse momenta of p(T) > 0.9GeV is 94% for pseudorapidities of vertical bar eta vertical bar < 0.9 and 85% for 0.9 < vertical bar eta vertical bar < 2.5. The inefficiency is caused mainly by hadrons that undergo nuclear interactions in the tracker material. For isolated muons, the corresponding efficiencies are essentially 100%. For isolated muons of p(T) = 100GeV emitted at vertical bar eta vertical bar < 1.4, the resolutions are approximately 2.8% in p(T), and respectively, 10 m m and 30 mu m in the transverse and longitudinal impact parameters. The position resolution achieved for reconstructed primary vertices that correspond to interesting pp collisions is 10-12 mu m in each of the three spatial dimensions. The tracking and vertexing software is fast and flexible, and easily adaptable to other functions, such as fast tracking for the trigger, or dedicated tracking for electrons that takes into account bremsstrahlung.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
The best irrigation management depends on accurate estimation of reference evapotranspiration (ET0) and then selection of the appropriate crop coefficient for each phenological stage. However, the evaluation of water productivity on a large scale can be done by using actual evapotranspiration (ETa), determined by coupling agrometeorological and remote sensing data. This paper describes methodologies used for estimating ETa for 20 centerpivots using three different approaches: the traditional FAO crop coefficient (K-c) method and two remote sensing algorithms, one called SEBAL and other named TEIXEIRA. The methods were applied to one Landsat 5 Thematic Mapper image acquired in July 2010 over the Northwest portion of the Sao Paulo State, Brazil. The corn, bean and sugar cane crops are grown under center pivot sprinkler irrigation. ET0 was calculated by the Penman-Monteith method with data from one automated weather station close to the study site. The results showed that for the crops at effective full cover, SEBAL and TEIXEIRA's methods agreed well comparing with the traditional method. However, both remote sensing methods overestimated ETa according to the degree of exposed soil, with the TEIXEIRA method presenting closer ETa values with those resulted from the traditional FAO K-c method. This study showed that remote sensing algorithms can be useful tools for monitoring and establishing realistic K-c values to further determine ETa on a large scale. However, several images during the growing seasons must be used to establish the necessary adjustments to the traditional FAO crop coefficient method.
Resumo:
O Cerrado é uma vegetação que já chegou a ocupar mais de 2 milhões de quilômetros quadrados, o que correspondia a 22% do território nacional. Ele vem sofrendo intensas agressões e interferências do homem e, por isso, está quase desaparecendo. O município de Botucatu possui muitos remanescentes deste bioma, e um deles está situado na Escola do Meio Ambiente/EMA (22°55'23”S e 48°27'28”W), local onde foi realizado o presente estudo. O objetivo deste trabalho é a produção de uma publicação sobre o bioma Cerrado. Para a produção deste material levou-se em conta os dados de um levantamento florístico do fragmento de Cerrado inserido na àrea da EMA, bem como dados de um questionário, que visa testar a hipótese de que a maioria das pessoas desconhece a vegetação deste bioma, desconhecendo inclusive que ela existe em Botucatu. Com dez perguntas abertas e fechadas, este questionário foi aplicado à pessoas que trabalham e/ou frequentam sete instituições (E.E. Parque Residencial 24 de Maio, E.M.E.F. Nair Amaral, PSF - Posto Saúde da Família do Jd. Aeroporto, ITE - Instituto Toledo de Ensino, FATEC - Faculdade de Tecnologia de Botucatu, ETA - Estação de Tratamento de Água e a Fundação CASA - Centro de Atendimento Socioeducativo ao Adolescente de Botucatu) situadas no mesmo bairro ou bairros vizinhos à EMA, locais onde, ainda, existem remanescentes desta vegetação. O levantamento florístico no fragmento de Cerrado da EMA mostrou que até o momento foram identificadas cinqüenta e duas espécies vegetais. A análise dos questionários demonstrou o desconhecimento dos entrevistados em relação à Flora do Cerrado local. Após a análise dos dados ficou clara a necessidade de produção de um material sobre este bioma, assim como acentuar a importância do trabalho de Educação Ambiental realizado na EMA