Análise comparativa entre propriedades mecânicas, termofísicas e geométricas de tijolos produzidos pelos fornos caieira e abóbada

In the State of Rio Grande do Norte potteries are distributed in several counties in the four meso, which are: West Potiguar, Center Potiguar, Agreste Potiguar and East Portiguar. The ceramics, mostly, are responsible for products used in construction as bricks, tiles and white brick and wood used as fuel. This paper had a primary focus in the region of Seridó. The furnaces in this region, used to manufacture bricks are configured Caieira and Valt, in most of them using principles rustic, usually operated in an empirical way, using principles of control rather primitive, predominantly visual control. The focus of this study was to analyze the differences in the thermophysical, mechanical and geometric characteristics of bricks produced by Caieira and vault furnaces, using the NBR 15720 and the evaluation of energy efficiency in both furnaces. Thermophysical characteristics were analyzed through tests to determine the water absorption obtained from the difference between dry mass and wet mass of the sample and analysis of the thermal gradient, the mechanical characteristics from determination of the compressive strength of ceramic brick popularly known as bricks and also analyzed the geometrical characteristics of the bricks in order to verify the homogeneity of manufacturing. The tests showed that the energy difference of the two furnaces is not considered responsible for a significant difference in the properties of the products

Balanço energético de um forno túnel de cerâmica estrutural convertido de lenha para gás natural

In energy systems, the balance of entrances, exits and losses are fundamental to rationalize the energy consumption, independently of the source (sun, natural gas, wind, water, firewood or oil). This estimate is important so much in the phase of project of the facilities, as in the exploration or operation. In the project phase it indicates the energy needs of the process and the contribution of the energy in the cost of the product and the capacity of storage of the fuel and in the operation phase it allows to evaluate the use of the energy in the process of it burns, showing the weak points that should suffer intervention to improve the efficiency. With this tool, it can be implemented routines of calculation of thermal balances in ovens of it burns of structural ceramic, in way to generate an optimized mathematical model for application in the current and promising structural ceramic brazilian industry. The ceramic oven in study is located in the metropolitan area of Natal (Rio Grande do Norte) and it is a continuous oven of the type wagons tunnel, converted of firewood for natural gas and it produces blocks of red ceramic. The energy balance was applied in the oven tunnel before and after the conversion and made the comparisons of the energy efficiencies (it burns to the firewood and it burns to natural gas), what showed that the gaseous fuel is more efficient when we burn structural ceramic in ovens tunnels. When we burn natural gas, the requested energy is smaller and better used. Tests were accomplished in the burned product that showed the best quality of the burned brick with natural gas. That quality improvement makes possible to accomplish new interventions for the most rational use of the energy in the oven tunnel of the Ceramic in study and in the industries of structural ceramic of the whole Brazil, that need control tools of burning and of quality

Electrically, Chemically, and Photonically Powered Torsional and Tensile Actuation of Hybrid Carbon Nanotube Yarn Muscles

Artificial muscles are of practical interest, but few types have been commercially exploited. Typical problems include slow response, low strain and force generation, short cycle life, use of electrolytes, and low energy efficiency. We have designed guest-filled, twist-spun carbon nanotube yarns as electrolyte-free muscles that provide fast, high-force, large-stroke torsional and tensile actuation. More than a million torsional and tensile actuation cycles are demonstrated, wherein a muscle spins a rotor at an average 11,500 revolutions/minute or delivers 3% tensile contraction at 1200 cycles/minute. Electrical, chemical, or photonic excitation of hybrid yarns changes guest dimensions and generates torsional rotation and contraction of the yarn host. Demonstrations include torsional motors, contractile muscles, and sensors that capture the energy of the sensing process to mechanically actuate.

Análise energética de sistemas de produção de etanol de mandioca (Manihot esculenta Crantz)

This work aimed to analyze the energetic consumption of the etanol production system, using the cassava as carbohidrates source. The researches were carried out from the field in the mid region of Paranapanema river, São Paulo state, during the period January to December, 2007. The energy consumption referring to the phases of crop production and industrial processing were appraised. It was verified that the total energetic cost of the crop production corresponded to 9,528.33 MJ ha(-1), and the most onerous item was the inputs (35.72%). In the industrial step, the energetic consumption was equivalent to 2,208.28 MJ t(-1). The operations of hydrolysis/saccharification/treatment of the juice represented 56.72% of the total energetic expenditure. The cassava crop presented an energetic cost of 1.54 MJ L-1 in relation to the etanol produced in the main agronomic operations crop production, and 11.76 MJ L-1 in the industrial processing. The energy efficiency observed in the cultivation and industrialization of the cassava was of 1.76.

Avaliação energética da produção de etanol utilizando como matéria-prima a cana-de-açúcar

This research analyzed the energetic consumption of the etanol, using as raw-material sugar cane. The searches were carried out from the field in the Midle Paranapanema River Region, São Paulo state, in the period from January to December 2007. The referring energy consumption from the crop production phase and industrial processing were evaluated. It was verified that the total energetic cost of the crop production corresponded to 14370.9MJ ha(-1), and the most onerous item was the inputs (50.4%). In the industrial step, the energetic consumption was equivalent to 1,641.56MJ t(-1), The 'hydrolysis, saccharification and broth treatment operations' represented 71.72% of the total energetic expenditure. It was also observed an energetic cost of 2.0MJ L(-1) in relation to the etanol produced in the main crop production operations, and 19.4MJ L(-1) in the industrial processing. The energy efficiency observed in the crop production and industrialization were of 1.1.

Electricity, hot water and cold water production from biomass. Energetic and economical analysis of the compact system of cogeneration run with woodgas from a small downdraft gasifier

Wood gasification technologies to convert the biomass into fuel gas stand out. on the other hand, producing electrical energy from stationary engine is widely spread, and its application in rural communities where the electrical network doesn't exist is very required. The recovery of exhaust gases (engine) is a possibility that makes the system attractive when compared with the same components used to obtain individual heat such as electric power. This paper presents an energetic alternative to adapt a fixed bed gasifier with a compact cogeneration system in order to cover electrical and thermal demands in a rural area and showing an energy solution for small social communities using renewable fuels. Therefore, an energetic and economical analysis from a cogeneration system producing electric energy, hot and cold water, using wooden gas as fuel from a small-sized gasifier was calculated. The energy balance that includes the energy efficiency (electric generation as well as hot and cold water system; performance coefficient and the heat exchanger, among other items), was calculated. Considering the annual interest rates and the amortization periods, the costs of production of electrical energy, hot and cold water were calculated, taking into account the investment, the operation and the maintenance cost of the equipments. Crown Copyright (C) 2010 Published by Elsevier Ltd. All rights reserved.

Analysis of the performance of an extraction-condensation steam turbine on a cogeneration system of a Brazilian sugar-alcohol factory

In this work a detailed thermodynamic analysis for an extraction-condensation steam turbine capable to drive a 40 MVA electricity generator in a sugar-alcohol factory was carried out. The use of this turbine in the cogeneration system showed that its efficiency contributed to increase the power generation, although the condensation reduces the overall efficiency of the plant. Sensibility analyses were performed to evaluate the behavior of the overall energy efficiency of a plant with the extraction-condensation turbine in function of the boiler efficiency, the specific consumption of steam in the processes and the condensation rate in the turbine. It was observed that the plant efficiency is very sensible to the condensation rate variation and it increases when there is an increase in the demand of steam for processes.

Estudo geofísico de vazamento controlado de álcool combustível em escala laboratorial

O etanol é utilizado de forma extensiva como combustível para veículos automotores no Brasil, devido tanto a características como ao clima favorável ao cultivo de cana-de-açúcar em uma cadeia produtiva bastante desenvolvida quanto à eficiência energética e ao teor quase inexistente de poluentes emitidos emsua combustão. A ampla rede de distribuição para atendimento ao consumidor final representa um risco constante de vazamentos e contaminação de rios, solo e água subterrânea. Este trabalho discute os resultados do monitoramento geofísico num experimento em escala de laboratório, resultante do vazamento controlado de etanol em sedimentos parcialmente saturados em água. A extensa aplicação de métodos elétricos em estudos ambientais e alterações significativas em termos de resistividade elétrica, provocada no ambiente geológico pela presença de compostos exógenos, justifica a seleção do método. Houve um aumento dos valores no início do experimento até o máximo em torno de 52h, seguido por queda acentuada até 342h e sucedido por crescimento lento e constante dos valores até 2.742h, quando comparados a valores prévios sem adição de etanol. Os dados sugerem uma relação temporal entre variações de resistividade elétrica e o comportamento geoquímico do etanolno ambiente geológico.

Perfil nutricional e cardiovascular de ratos normotensos e hipertensos sob dieta hiperlipídica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise energética na produção de feno de Cynodon dactylon (L.) Pers

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Balanço energético na produção de feno de alfafa em sistema intensivo de produção de leite

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da silagem de diferentes híbridos de milho (Zea mays, L.) por meio do desempenho de bezerros confinados em fase de crescimento

Objetivou-se avaliar, por meio do desempenho animal, silagens de três híbridos de milho (Zea mays, L.): Agroceres AG-5011, Braskalb XL-344 e Cargill C-806. Foram utilizados 27 machos, não-castrados, mestiços Nelore x Charolês, com idade média de 10 meses e peso médio inicial de 252 kg, confinados durante 84 dias, subdivididos em quatro períodos de 21 dias. As silagens dos híbridos testados corresponderam a 70% da matéria seca ofertada. Não houve interação do híbrido de milho testado com o período de avaliação em confinamento, para os parâmetros estudados. A dieta que incluiu a silagem do híbrido AG-5011 resultou em maior consumo voluntário médio diário de matéria seca, expresso por 100 kg de peso vivo e tamanho metabólico, e maior consumo médio diário de fibra em detergente ácido, expresso nas diferentes formas, em relação aos híbridos XL-344 e C-806, que, por sua vez, foram semelhantes entre si. As dietas que incluíram silagens dos híbridos AG-5011, XL-344 e C-806 apresentaram semelhanças quanto ao consumo voluntário de matéria seca, expresso em kg/animal/dia (6,73; 6,05; e 6,19), consumo médio diário de FDN, em kg/dia (3,054; 2,837; e 2,836), e energia digestível, expressa nas diferentes formas, ganho de peso médio diário, em kg/dia (1,283; 1,219; e 1,249), ganho em estado corporal, conversão alimentar (5,26; 4,98; e 4,97) e eficiência energética (14,02; 13,68; e 13,21). Os três híbridos são indicados como materiais genéticos de muito boa qualidade para produção de silagem, promovendo ganhos de peso diário superior a 1,2 kg/animal/dia, quando utilizados em dietas com relação volumoso:concentrado de 70:30.

Residual feed intake and relationships with performance of Nellore cattle selected for post weaning weight

Objetivou-se com este trabalho avaliar desempenho, parâmetros de eficiência e correlações fenotípicas entre medidas de eficiência energética de animais Nelore selecionados para peso pós-desmame e classificados quanto ao consumo alimentar residual, calculado pela diferença entre o consumo observado e o predito, com base no peso vivo médio metabólico e no ganho médio diário. Assim, os animais foram classificados em três grupos: alto (> média + 0,5 desvio-padrão; menos eficientes); médio (± 0,5 desvio-padrão da média); e baixo (< média - 0,5 desvio padrão; mais eficientes) consumo alimentar residual. Não foram observadas diferenças nos pesos vivos inicial e final, no ganho médio diário e no consumo de matéria seca entre os grupos. Animais com baixo consumo alimentar residual mostraram-se também com melhor eficiência alimentar, conversão alimentar e eficiência parcial de crescimento e não apresentaram diferenças em relação aos outros grupos quanto à taxa de crescimento relativo e taxa Kleiber. O consumo alimentar residual apresentou correlação significativa com eficiência alimentar (_0,25), conversão alimentar (0,25), eficiência parcial de crescimento (_0,37) e consumo de MS (0,16) e não apresentou correlação significativa com peso vivo (0,04), ganho médio diário (_0,02), taxa de crescimento relativo (_0,03) e taxa de Kleiber (_0,05). Foram encontradas correlações significativas entre conversão alimentar e peso vivo inicial (0,34) e ganho médio diário (_0,46). Eficiência parcial de crescimento apresentou correlação significativa comtodos os outros parâmetros de eficiência analisados. O consumo alimentar residual, em comparação às demais medidas de eficiência energética, apresenta grande potencial na eficiência produtiva, sendo independente de crescimento e tamanho dos animais.

Sojas integrais tostada pelo vapor e extrusada em rações de poedeiras

An experiment with 400 laying hens Hy Line with 26 weeks of age was conducted to compare the performance of laying hens fed during four cycles of 28 days with diets containing soybean meal (SM) plus soybean oil (SBM+oil), whole extruded soybean (ESB) and whole steam toasted soybean (TSB). A completely design randomized blocks was used, with 10 treatments and five replicates and eight laying hens in each experimental unit. The treatments consisted on the replacement of SBM per ESB and TSB at the levels 0, 25, 50, 75 and 100%; and as control the SBM with or without addition of oil. The results obtained showed that the hens were able to regulate the feed intake to maintain the energy intake only at lower energetic levels, however they tended to over intake energy with the increase of energy levels of the diets. The addition of oil or soybeans in the diets improved feed: gain ratio, however worsened the energy efficiency in relation to the diet without oil. The processing of soybean provided differences on the performance of laying hens and the ESB showed to be superior to TSB. The hens had higher use of the oil added to the soybean meal (SBM + oil) and ESB in relation to TSB. However, the values of AMEn obtained for the ESB were 12% higher, in average, to those determined for the SBM + oil and for the TSB.

Cogeneration system design optimization

Cogeneration system design deals with several parameters in the synthesis phase, where not only a thermal cycle must be indicated but the general arrangement, type, capacity and number of machines need to be defined. This problem is not trivial because many parameters are considered as goals in the project. An optimization technique that considers costs and revenues, reliability, pollutant emissions and exergetic efficiency as goals to be reached in the synthesis phase of a cogeneration system design process is presented. A discussion of appropriated values and the results for a pulp and paper plant integration to a cogeneration system are shown in order to illustrate the proposed methodology.