The Perception of Smile Attractiveness Variations from Esthetic Norms, Photographic Framing and Order of Presentation

Objectives: To evaluate the attractiveness of a smile according to variations from esthetic norms, photographic framing, and the order of the presentation of photographs.Materials and Methods: A photograph of an individual was selected and digitally manipulated to create the following smiles: an ideal control smile (I), a smile with diastema (D1), a smile with midline deviation (LM3), a smile with deviation from the long axes of the lateral incisors (10D), and a smile with an inverted smile arc (LSRV). The manipulated photographs were developed in framings of the face and of the mouth and evaluated by 20 laypeople. For half the evaluators, the presentation started with facial photographs and, for the other half, the presentation began with the mouth shots. Evaluators were asked to rank the photographs from the least to the most attractive; then, each photograph was awarded a mark (scale of 0.0 to 10.0).Results: In both presentations, the smiles I, LM3, 10D, and LSRV received favorable ratings, whereas the D1 smile got poor ratings. The photographic framings used (face vs mouth) and the order of presentation of the photographs did not influence the rankings.Conclusion: The absence of variations from beauty norms of a smile has a positive impact on its esthetic perception, but variations from the norms do not necessarily result in reduced attractiveness. (Angle Orthod. 2009;79:634-639.)

Effect of variations in annealing temperature and metallic cations on nanostructured molybdate thin films

Crystalline molybdate thin films were prepared by the complex polymerization method. The AMoO(4) (A = Ca, Sr, Ba) films were deposited onto Si wafers by the spinning technique. The Mo-O bond in the AMoO(4) structure was confirmed by FTIR spectra. X-ray diffraction revealed the presence of crystalline scheelite-type phase. The mass, size, and basicity of A(2+) cations was found to be dependent on the intrinsic characteristics of the materials. The grain size increased in the following order: CaMoO4 < SrMoO4 < BaMoO4. The emission band wavelength was detected at around 576 nm. Our findings suggest that the material's morphology and photoluminescence were both affected by the variations in cations (Ca, Sr, or Ba) and in the thermal treatment.

Transpiration and stomatal resistance variations of perennial tropical crops under soil water availability conditions and water deficit

O experimento foi realizado no Departamento de Produção Vegetal da Escola Superior de Agricultura Luiz de Queiroz, ESALQ/USP, Piracicaba, São Paulo, Brasil, utilizando-se as culturas de guaranazeiro (Paullinia cupana Kunth), cafeeiro (Coffea arabica L.), cajueiro (Anacardium occidentale L.), goiabeira (Psidium guajava L.) e seringueira (Hevea brasiliensis Muell. - Arg.). No período de seca (setembro/94) e de chuvas (novembro/94), realizaram-se determinações de resistência estomática (RE) (s cm-1) e transpiração (T) (µg cm-1 s-1) nas diferentes espécies. O delineamento experimental foi em blocos casualizados com cinco repetições. A partir das análises dos dados pode-se concluir: 1. diferenças significativas entre espécies, em termos das variáveis avaliadas no período de deficiência hídrica, com valores decrescentes de resistência estomática e crescente de transpiração na seguinte ordem: guaranazeiro > cafeeiro > cajueiro > goiabeira > seringueira; 2. Nas águas as diferenças entre espécies, para ambas as variáveis, foram menos evidentes, continuando a cultura da seringueira a apresentar menor resistência estomática e maior transpiração dentre as espécies; 3. As culturas de guaraná e café apresentaram maior resistência à perda de água, em relação às demais culturas.

Variations in the sensitivity of different primers for detecting Wolbachia in Anastrepha (diptera: tephritidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structural variations among monocot emergent and amphibious species from lakes of the semi-arid region of Bahia, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Seeder-fertilizer machine: energetic demand as a function of vegetal covering handling and manure deposition shank depth in no-tillage system

O trabalho teve por objetivo avaliar a demanda energética de uma semeadora-adubadora, em função do tipo e manejo da cultura de cobertura vegetal e da profundidade da haste de deposição de adubo. Foi utilizado um trator Valtra BM100, instrumentado, para tracionar uma semeadora-adubadora de precisão equipada com quatro fileiras de semeadura espaçadas de 0,9 m para cultura de milho. O experimento foi conduzido em parcelas subsubdivididas, na área experimental do Laboratório de Máquinas e Mecanização Agrícola (LAMMA) da UNESP-Jaboticabal, utilizando duas culturas de cobertura (mucuna-preta e crotalária), três manejos dessas coberturas, sendo dois mecânicos (triturador de palhas e rolo-faca) e um químico (pulverização com herbicida), realizados 120 dias após a semeadura das culturas de cobertura e três profundidades da haste de deposição do adubo (0,11; 0,14 e 0,17 m), perfazendo 18 tratamentos, com quatro repetições, totalizando 72 observações. Foram avaliados os parâmetros velocidade de deslocamento, patinagem, força na barra de tração, força de pico, potência na barra de tração, potência de pico e consumo de combustível. Pôde-se concluir que a força na barra de tração foi menor para as profundidades de 0,11 e 0,14 m da haste sulcadora de adubo, o mesmo ocorrendo para força de pico, potência na barra de tração e consumo volumétrico. O consumo específico foi menor na profundidade de 0,17 m da haste sulcadora de adubo. As culturas de cobertura e seus manejos não interferiram no desempenho das máquinas estudadas.

Análise da configuração de SAMU utilizando múltiplas alternativas de localização de ambulâncias

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Metallic powder injection molding using low pressure

The demand by high performance materials that have to support severe service conditions at a reasonable cost has been forcing the powder metallurgy to improve constantly. The most recent and more important innovation in the area is the process of powder injection.Powder injection molding (PIM) is a technology capable of producing a new range of components from powders. This advanced technology overcomes the existent limitations in the forming of products with complex geometry. The process presents countless variations which are used in the industry today. Invariably, it consists of mixing the powders and a thermo-plastic binder, injecting the mass in the mold in the wanted form, debinding, sintering and making optional secondary operations, as for example, machinery.The purpose of this work is to review the metal injection molding techniques and apply the low pressure injection molding process to family of parts using metallic powder with 10 mum particle size. This work also comments the design and construction of a low pressure injection machine and injection molds. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Variations in tree community composition and structure in a fragment of tropical semideciduous forest in southeastern Brazil related to different human disturbance histories

In an area of tropical seasonal semideciduous forest, the soil characteristics, floristic composition, physiognomic structure, and the distribution of three regeneration and three dispersal guilds were studied for four stands within the forest that had documented histories of varying degrees of human disturbance. The aim was to study forest regeneration in areas of preserved forest and secondary forest, with parts of both types of forest experiencing either 'intensive' or 'occasional' cattle trampling. The study was carried out in the Sebastiao Aleixo da Silva Ecological Station, Bauru, São Paulo State, Brazil. Two stands were called 'secondary' because they corresponded to forest tracts that were felled and occupied by crops and pastures in the past and then abandoned to forest regeneration ca. 40 years before this study. The other two stands, called 'preserved', corresponded to areas of the fragment where the forest has been maintained with only minor human impacts. The arboreal component of the tree community (diameter at breast height or dbh greater than or equal to 5 cm) was sampled in 20 plots of 40 m x 40 m, and the subarboreal component (diameter at the base of the stem or dbs < 5 cm and height greater than or equal to 0.5 m) in subplots of 40 m x 2 m. Physiognomic features, such as canopy height and density of climbing plants, were registered all over a 5 m x 5 m gridline laid on the sample plots. Soil bulk samples were collected for chemical and textural analyses. Most detected differences contrasted the secondary to the preserved forest stands. The soils of the secondary stands showed higher proportions of sand and lower levels of mineral nutrients and organic matter than those of the preserved stands, probably due to higher losses by leaching and erosion. Compared to the secondary stands, the preserved ones had higher proportions of tall trees, higher mean canopy height, lower species diversity, higher abundance of autochorous and shade-tolerant climax species, and lower abundance of pioneer and light-demanding climax species. Despite the high proportion of species shared by the preserved and secondary stands (108 out of 139), they differed consistently in terms of density of the most abundant species. on the other hand, the secondary and preserved stands held similar values for tree density and basal area, suggesting that 40 years were enough to restore these features. Effects of cattle trampling on the vegetation were detected for the frequency of trees of anemochorous and zoochorous species, which were higher in the stands under occasional and intensive cattle trampling, respectively. The density of thin climbers was lower in the stands with intensive trampling. (C) 2004 Elsevier B.V. All rights reserved.

Task demand effects on postural control in older adults

The literature shows conflicting results regarding older adults' (OA) postural control performance. Differing task demands amongst scientific studies may contribute to such ambiguous results. Therefore, the purpose of this study was to examine the performance of postural control in older adults and the relationship between visual information and body sway as a function of task demands. Old and young adults (YA) maintained an upright stance on different bases of support (normal, tandem and reduced), both with and without vision, and both with and without room movement. In the more demanding tasks, the older adults displayed greater body sway than the younger adults and older adults were more influenced by the manipulation of the visual information due to the room movement. However, in the normal support condition, the influence of the moving room was similar for the two groups. These results suggest that task demand is an important aspect to consider when examining postural control in older adults. (c) 2006 Elsevier B.V. All rights reserved.

Physiological and genomic variations in rice cells recovered from direct immersion and storage in liquid nitrogen

The use of cryoprotectants and slow cooling rates are routine procedures for the cryopreservation of plant cell lines. However, our results with rice (Oryza sativa L,, ev. Taipei 309) show that calli can be cryopreserved by direct immersion and stored in liquid nitrogen without any cryoprotection, the efficiency of recovery using this method, as well as a conventional method was generally increased with a previous abscisic acid (ABA) treatment. Following cryopreservation, calli demonstrated some differences with respect to unfrozen calli of the same lines, Thus, resistance to freezing stress (- 20 degrees C for 2 h) increased significantly in all lines tested, irrespective of their pre-incubation with ABA, Calli that had been directly stored in liquid nitrogen also demonstrated a higher competence for genetic transformation than their unfrozen counterparts, as indicated by the transient gene expression levels obtained after particle bombardment, These differences might lead to further biotechnological applications, A genetic analysis of amplified DNA polymorphisms was performed with three independent lines that had been subjected to four combinations of ABA treatment and direct immersion in liquid nitrogen, At the loci screened with the randomly amplified polymorphic DNA (RAPD) markers tested, the genetic variations among lines and among calli of the same line appear to bd more related to tissue-culture-induced somaclonal variation than to cryoselection.

Transmission network expansion planning considering uncertainty in demand

This paper presents two mathematical models and one methodology to solve a transmission network expansion planning problem considering uncertainty in demand. The first model analyzed the uncertainty in the system as a whole; then, this model considers the uncertainty in the total demand of the power system. The second one analyzed the uncertainty in each load bus individually. The methodology used to solve the problem, finds the optimal transmission network expansion plan that allows the power system to operate adequately in an environment with uncertainty. The models presented are solved using a specialized genetic algorithm. The results obtained for several known systems from literature show that cheaper plans can be found satisfying the uncertainty in demand.

Demographic of short gut syndrome: Increasing demand is not followed by referral of potential candidates for small bowel transplantation

Background. Despite improvements in small bowel transplantation (SBTx), early referral of patients with irreversible intestinal failure (IF) remains a major obstacle. In this study we evaluated the demand for SBTx among seven surgical pediatric centers located at least 200 km from our center.Methods. From 1997 to 2001, 640 patients have been treated for neonatal diseases, including 248 who underwent a minor or major intestinal resection. Twenty-four patients with major resections presented with short gut syndrome, requiring total parenteral nutrition (TPN). The greatest demand was in postsurgical neonates with necrotizing enterocolitis, gastroschiesis, onphalocoeles, or midgut volvulus, and in three adults with postradiotherapy arteritis (n = 2) and mesenteric vein thromboses (n = 1). The median length of residual bowel after resection was 20 to 30 cm, without an ileocecal valve. Four patients were referred for SBTx evaluation; three died while awaiting a donor; 20 were not referred, among whom 14 died of TPN complications.Results. Approximately 62 children per year require nutritional support for IF, most of whom develop complications related to TPN. Because many patients who are TPN-dependent develop complications, we believe that early referral would reduce mortality.Conclusions. Greater medical awareness about the feasibility of SBTx procedures and earlier referral may improve results and quality of life after transplant.