Mechanical and tribological properties of PVD-coated cemented carbide as evaluated by a new multi-pass scratch testing method

A new test method based on multipass scratch testing has been developed for evaluating the mechanical and tribological properties of thin, hard coatings. The proposed test method uses a pin-on-disc tribometer and during testing a Rockwell C diamond stylus is used as the “pin” and loaded against the rotating coated sample. The influence of normal load on the number of cycles to coating damage is investigated and the resulting coating damage mechanisms are evaluated by posttest scanning electron microscopy. The present study presents the test method by evaluating the performance of Ti0.86Si0.14N, Ti0.34Al0.66N, and (Al0.7Cr0.3)2O3 coatings deposited by cathodic arc evaporation on cemented carbide inserts. The results show that the test method is quick, simple, and reproducible and can preferably be used to obtain relevant data concerning the fatigue, wear, chipping, and spalling characteristics of different coating-substrate composites. The test method can be used as a virtually nondestructive test and, for example, be used to evaluate the fatigue and wear resistance as well as the cohesive and adhesive interfacial strength of coated cemented carbide inserts prior to cutting tests.

Outdoor performance of forest seedlings pre-cultivated under artificial lights : effects of the light spectra used for pre-cultivation on the future establishment and development

Forest nurseries are essential for producing good quality seedlings, thus being a key element in the reforestation process. With increasing climate change awareness, nursery managers are looking for new tools that can help reduce the effects of their operations on the environment. The ZEPHYR project, funded by the European Commission under the Seventh Framework Programme (FP7), has the objective of finding new alternatives for nurseries by developing innovative zero-impact technologies for forest plant production. Due to their direct relationship to the energy consumption of the nurseries, one of the main elements addressed are the grow lights used for the pre-cultivation. New LED luminaires with a light spectrum tailored to the seedlings’ needs are being studied and compared against the traditional fluorescent lamps. Seedlings of Picea abies and Pinus sylvestris were grown under five different light spectra (one fluorescent and 4 LED) during 5 weeks with a photoperiod of 16 hours at 100 μmol∙m-2∙s-1 and 60% humidity. In order to evaluate if these seedlings were able cope with real field stress conditions, a forest field trial was also designed. The terrain chosen was a typical planting site in mid-Sweden after clear-cutting. Two vegetation periods after the outplanting, the seedlings that were pre-cultivated under the LED lamps have performed at least as well as those that were grown under fluorescent lights. These results show that there is a good  potential for lightning substitution in forestry nurseries.

Fast algorithm for the cutting angle method of global optimization

The cutting angle method for global optimization was proposed in 1999 by Andramonov et al. (Appl. Math. Lett. 12 (1999) 95). Computer implementation of the resulting algorithm indicates that running time could be improved with appropriate modifications to the underlying mathematical description. In this article, we describe the initial algorithm and introduce a new one which we prove is significantly faster at each stage. Results of numerical experiments performed on a Pentium III 750 Mhz processor are presented.

Predicting molecular structures: an application of the cutting angle method

The ability to predict molecular geometries has important applications in chemistry. Specific examples include the areas of protein space structure elucidation, the investigation of host–guest interactions, the understanding of properties of superconductors and of zeolites. This prediction of molecular geometries often depends on finding the global minimum or maximum of a function such as the potential energy. In this paper, we consider several well-known molecular conformation problems to which we apply a new method of deterministic global optimization called the cutting angle method. We demonstrate that this method is competitive with other global optimization techniques for these molecular conformation problems.

Geometry and combinatorics of the cutting angle method

Lower approximation of Lipschitz functions plays an important role in deterministic global optimization. This article examines in detail the lower piecewise linear approximation which arises in the cutting angle method. All its local minima can be explicitly enumerated, and a special data structure was designed to process them very efficiently, improving previous results by several orders of magnitude. Further, some geometrical properties of the lower approximation have been studied, and regions on which this function is linear have been identified explicitly. Connection to a special distance function and Voronoi diagrams was established. An application of these results is a black-box multivariate random number generator, based on acceptance-rejection approach.

Cutting angle method - a tool for constrained global optimization

Cutting angle method (CAM) is a deterministic global optimization technique applicable to Lipschitz functions f: Rn → R. The method builds a sequence of piecewise linear lower approximations to the objective function f. The sequence of solutions to these relaxed problems converges to the global minimum of f. This article adapts CAM to the case of linear constraints on the feasible domain. We show how the relaxed problems are modified, and how the numerical efficiency of solving these problems can be preserved. A number of numerical experiments confirms the improved numerical efficiency.

The clinical application of three screening tools for recognizing post-partum depression

Postnatal depression is a major health issue for childbearing women world-wide, as it is not always identified early. This study aimed to evaluate the clinical application of three screening instruments for the early recognition of post-partum depression, the Postpartum Depression Prediction Inventory, the Postpartum Depression Screening Scale and the Edinburgh Postnatal Depression Scale, and to examine nurse interventions following use of the instruments. Data were collected at two points, at 28 weeks prenatal (107 women) and eight weeks postnatal (84 women). Results showed that 17% of the women scored significant symptoms of post-partum depression and 10–15% had a positive screen for major postnatal depression. There was a statistically significant correlation between the total score on the Postpartum Depression Screening Scale and the Edinburgh Postnatal Depression Scale. Of those eight women identified as being at risk, seven had received anticipatory guidance and five had received counselling by the nurses. The Postpartum Depression Prediction Inventory enabled nurses to identify women at risk of post-partum depression and offer interventions.

Efficient serial and parallel implementations of the cutting angle global optimisation technique

We examine efficient computer implementation of one method of deterministic global optimisation, the cutting angle method. In this method the objective function is approximated from values below the function with a piecewise linear auxiliary function. The global minimum of the objective function is approximated from the sequence of minima of this auxiliary function. Computing the minima of the auxiliary function is a combinatorial problem, and we show that it can be effectively parallelised. We discuss the improvements made to the serial implementation of the cutting angle method, and ways of distributing computations across multiple processors on parallel and cluster computers.

A new method for locating the global optimum : application of the cutting angle method to molecular structure prediction

Many problems in chemistry depend on the ability to identify the global minimum or maximum of a function. Examples include applications in chemometrics, optimization of reaction or operating conditions, and non-linear least-squares analysis. This paper presents the results of the application of a new method of deterministic global optimization, called the cutting angle method (CAM), as applied to the prediction of molecular geometries. CAM is shown to be competitive with other global optimization techniques for several benchmark molecular conformation problem. CAM is a general method that can also be applied to other computational problems involving global minima, global maxima or finding the roots of nonlinear equations.

A comparison of search functions and other navigational tools provided on government websites

This paper reports the outcomes of a study that evaluated the effectiveness of search functions compared to other navigational tools available on government websites. The study used an observation exercise triangulated with a post observation interview. Results suggest that while there wasn't any significant difference in effectiveness between search functions and other navigational tools, the skill with which the search function is implemented and participants' familiarity with the website, are fundamental determinants of users' opinions. Implications of the findings for research and practice are discussed.

Stress analysis of compression of aluminium with rotating tools

Compression tests carried out on aluminium specimens showed that when the die was rotated the compression load dropped. A slab method is employed to examine this process. The load reduction is explained by the deviation of friction vector due to the relative circumferential movement between the die and the material. This mechanism is incorporated into a theoretical model and an expression is derived for compression pressure. Analytical solutions established compare favourably with experimental results. It is also shown that there is a limitation to the load reduction: the compressive load can never be lower than 70 percent of the yield limit.

Ecologically sustainable development and architecture: the impact of rating tools

The concept of Ecologically Sustainable Development (ESD) has become an important issue – albeit often scarcely applied – in the design of commercial buildings. To encourage the adoption of sustainable strategies in the practice of design and to address the environmental problems caused by these developments, governments and organisations of various countries have proposed the adoption of scorecard rating tools to inform designers of the impact of their decisions and to present a way of establishing project goals and objectives early in the design process. In Australia, the recent introduction of the Green Star Rating Tool (Office Design) is believed to provide the architects with a ‘whole-of-building’ assessment of the environmental impact of their design by creating a checklist against which to benchmark performance. This paper follows the design of a commercial building, evaluating the impact of Green Star in the overall process. The results of the study suggest the need to include the use of scorecard rating tools in a more integrated model, where ESD is considered at every stage of design and construction rather than being a separate component applied only to promote the ‘greenness’ of a building. Rating tools can be an asset to the design team, provided sustainable requirements are reinforced throughout the entire process.