Influência do estresse nutricional programado na composição da microalga isochrysis galbana

Global warming due to Greenhouse Gases (GHG) emissions, especially CO2, has been identified as one of the major problems of the twenty-first century, considering the consequences that could represent to planet. Currently, biological processes have been mentioned as a possible solution, especially CO2 biofixation due to association microalgae growth. This strategy has been emphasized as in addition to CO2 mitigation, occurs the production of biomass rich in compounds of high added value. The Microalgae show high photosynthetic capacity and growth rate higher than the superior plants, doubling its biomass in one day. Its culture does not show seasons, they grow in salt water and do not require irrigation, herbicides or pesticides. The lipid content of these microorganisms, depending on the species, may range from 10 to 70% of its dry weight, reaching 90% under certain culture conditions. Studies indicate that the most effective method to promote increased production of lipids in microalgae is to induce stress by limiting nitrogen content in the culture medium. These evidences justify research continuing the production of biofuels from microalgae. In this paper, it was studied the strategy of increasing the production of lipids in microalgae I. galbana with programmed nutritional stress, due to nitrogen limitation. The physiological responses of microalgae, grown in f / 2 with different concentrations of nitrogen (N: P 15,0-control, N: 5,0 P and N: P 2,5) were monitored. During exponential phase, results showed invariability in the studied conditions. However the cultures subjected to stress in stationary phase, showed lower biomass yields. There was an increase of 32,5% in carbohydrate content and 87.68% in lipids content at N: P ratio of 5,0 and an average decrease of 65% in protein content at N: P ratios of 5, 0 and 2.5. There were no significant variations in ash content, independently of cultivation and growth phase. Despite the limitation of biomass production in cultures with N: P smaller ratios, the increase of lipid accumulation highest lipids yields were observed as compared to the control culture. Given the increased concentration of lipids associated to stress, this study suggests the use of microalgae Isochrysis galbana as an alternative raw material for biofuel production

Avaliação físico-química e funcional da algaroba prosopis juliflora proveniente da mesorregião agreste do Rio Grande do Norte

Algaroba (Prosopis juliflora) is a typical legume from arid and semi arid regions, which is composed by sugar-rich pods and high protein seeds. Phenolic compounds are secondary metabolites recognized as potent bioactive compounds, found in several vegetables.Therefore, the objective of this work is to characterize the algaroba flour in terms of its physicalchemical composition, total phenolic content, antioxidant activity by DPPH and ABTS methods, a-amylase and a-glycosidase inhibition, as well as to analyze its organic compounds by high performance liquid chromatography (HPLC). Three experimental groups were investigated (seeds, seeds and pod together and only pod), which were prepared by oven drying and posterior grinding. Water and ethanol extracts (70, 80, 100% v/v) were prepared and used for functional studies. Organic compounds were detected by using HPLC equipment coupled to mass spectrometer. Results show important physical-chemical differences among the experimental groups, seeds, seeds and pod together and only pod. The algarroba seed flour is high in protein (49.49%) and fat (3.10%), while the pod flour is especially rich in sugar (60.3% to 67.9%). Algaroba phenolics are concentrated in pod flour, mainly in water extracts (1.30 mg GAEQ/100g sample). All seed extracts showed high DPPH activity and maximum antioxidant activity was registered for ethanol 80% extracts (19.81 μM Trolox/g sample). The ABTS activity ranged from 9.73 to 12.74 μM Trolox/g sample. Nearly all the extracts were able to inhibit α-amylase activity mildly (30.50% to 48.80%), while the maximum α-glycosidase inhibition was observed for pod water extracts (81.03%). Algaroba water extracts proven to be especially rich in organic compounds, observed by the high number of chromatographic peaks. Results demonstrate that algaroba is a potential candidate for further investigations concerning its possible functional applications

Suco desidratado de caju (Anacardium occidentale L.) por atomização: caracterização físico-química, bioativa e estudo da vida de prateleira do produto

Despite the relatively organized cashew (Anacardium occidentale L.) productive chain and the number of cashew derivatives found in the market, it is estimated that over 90% of the cashew peduncle is wasted. A possible strategy for a better commercial exploitation of this agroindustrial commodity would be the production of spray dried cashew pulp. Thus, this paper approaches the yellow cashew pulp spray drying process and the final product evaluation. Based on that, the shelf life of the spray dried cashew pulp packed in different packaging was evaluated. Drying was conducted in two drying temperatures (140 °C to 150 °C) and two concentrations of Arabic gum (AG, 15% and 25%), which summed four experimental groups. The drying performance was evaluated as well as the physicochemical characteristics (moisture, water activity, total soluble solids, pH, density, solubility, particle diameter, hygroscopicity, degree of caking, color, scanning electronic microscopy and X-ray diffraction), composition (protein, ash, fat and sugars) and bioactive and functional value (total phenolic compounds, carotenoids, ascorbic acid and antioxidant activity) of the final products. Results showed spray drying efficiency higher than 65% for all experiments, mainly for the C4 group (150 °C and 25% AG) which reached efficiency of 93.4%. It was also observed high solubility (94.7% to 97.9%) and the groups with lower hygroscopicity (5.8% and 6.5%) were those with the highest proportion of drying coadjuvant. The particle diameters ranged between 14.7 μm and 30.2 μm and increased with the proportion of AG. When comparing the product before and after spray drying, the drying impact was evident. However, despite the observed losses, dried yellow cashew showed high phenolic concentration (from 235.9 to 380.4 mg GAE eq / 100 g DM), carotenoids between 0.22 and 0.49 mg/100 g DM and remarkable ascorbic acid levels (852.4 to 1346.2 mg/100 g DM), in addition to antioxidant activity ranging from 12.9 to 16.4 μmol TE/ g DM. The shelf life study revealed decreased phenolic content over time associated to a slight water activity increase. Overall, our results unveil the technological and bioactive potential of dried yellow cashew as a functional ingredient to be used in food formulations or as a ready-to-use product. The technological approach presented here can serve as an efficient strategy for a rational use of the cashew apple, avoiding its current underutilization

Extração supercrítica do óleo de linhaça: construção do extrator, estudo de parâmetros de processo, avaliação química e antioxidante do produto

The aim of the present study was to extract vegetable oil from brown linseed (Linum usitatissimum L.), determine fatty acid levels, the antioxidant capacity of the extracted oil and perform a rapid economic assessment of the SFE process in the manufacture of oil. The experiments were conducted in a test bench extractor capable of operating with carbon dioxide and co-solvents, obeying 23 factorial planning with central point in triplicate, and having process yield as response variable and pressure, temperature and percentage of cosolvent as independent variables. The yield (mass of extracted oil/mass of raw material used) ranged from 2.2% to 28.8%, with the best results obtained at 250 bar and 50ºC, using 5% (v/v) ethanol co-solvent. The influence of the variables on extraction kinetics and on the composition of the linseed oil obtained was investigated. The extraction kinetic curves obtained were based on different mathematical models available in the literature. The Martínez et al. (2003) model and the Simple Single Plate (SSP) model discussed by Gaspar et al. (2003) represented the experimental data with the lowest mean square errors (MSE). A manufacturing cost of US$17.85/kgoil was estimated for the production of linseed oil using TECANALYSIS software and the Rosa and Meireles method (2005). To establish comparisons with SFE, conventional extraction tests were conducted with a Soxhlet device using petroleum ether. These tests obtained mean yields of 35.2% for an extraction time of 5h. All the oil samples were sterilized and characterized in terms of their composition in fatty acids (FA) using gas chromatography. The main fatty acids detected were: palmitic (C16:0), stearic (C18:0), oleic (C18:1), linoleic (C18:2n-6) and α-linolenic (C18:3n-3). The FA contents obtained with Soxhlet dif ered from those obtained with SFE, with higher percentages of saturated and monounsaturated FA with the Soxhlet technique using petroleum ether. With respect to α-linolenic content (main component of linseed oil) in the samples, SFE performed better than Soxhlet extraction, obtaining percentages between 51.18% and 52.71%, whereas with Soxhlet extraction it was 47.84%. The antioxidant activity of the oil was assessed in the β-carotene/linoleic acid system. The percentages of inhibition of the oxidative process reached 22.11% for the SFE oil, but only 6.09% for commercial oil (cold pressing), suggesting that the SFE technique better preserves the phenolic compounds present in the seed, which are likely responsible for the antioxidant nature of the oil. In vitro tests with the sample displaying the best antioxidant response were conducted in rat liver homogenate to investigate the inhibition of spontaneous lipid peroxidation or autooxidation of biological tissue. Linseed oil proved to be more efficient than fish oil (used as standard) in decreasing lipid peroxidation in the liver tissue of Wistar rats, yielding similar results to those obtained with the use of BHT (synthetic antioxidant). Inhibitory capacity may be explained by the presence of phenolic compounds with antioxidant activity in the linseed oil. The results obtained indicate the need for more detailed studies, given the importance of linseed oil as one of the greatest sources of ω3 among vegetable oils

Uma proposta metodológica do ensino da química para alunos da Zona Rural :O estudo do leite

La enseñanza desarrolló, así como los métodos y las técnicas de enseñar. Aquí el he/she piensa un método instrucción, en que el estudiante está más de un oyente simple: además la parte íntegra, él se llama para intervenir continuamente, mientras tocando una parte ancho, interactivo e involucrando, del contextualização del tema para ser trabajado -inclusivo, asocie día a día al his/her y contextual al programa de la disciplina de Química, hasta la manera como ese tema debe explorarse. La leche, el tema pone en correlación al origen del grupo de los estudiantes seleccionados, fue explorado, dentro de una visión sistémica, bajo el punto de vista de la composición de las propiedades de la industrialización y de la comercialización. Buscando prever los caminos de la construcción y organización del conocimiento de los estudiantes, se usó el modelo de administración mental de Antoine de La Garranderie y la teoría de aprender de Ausubel. El conocimiento de los estudiantes se supervisó antes, durante y al final de las actividades desarrolladas, práctica que permitió verificar la evolución y el nivel de asimilación conceptual de éstos con respecto al tema en el estudio. El análisis de los resultados obtenidos, después de la aplicación de una encuesta que contempla veinte asuntos, todo pertinentes al tema, demostró un nivel del uso sobre el promedio, lo que merecido la pena el método de enseñanza propuesta

Obtenção e caracterização físico-química de blendas poliméricas, baseadas em POE e PMMA, dopadas com dióxido de titânio

The study of polymer blends has been an alternative method in the search field of new materials for obtaining materials with improved properties. In this work blends of poly(methyl methacrylate) (PMMA) and poly(ethylene oxide) (PEO) doped with titanium dioxide (TiO2) were studied. The PEO is a polymer semicrystalline structure varying between, 70 and 84% crystallinity, while the PMMA exhibits behavior amorphous in their structure. The use of TiO2 is related to corrosion-resistant of titanium as well as good heat transfer and other characteristics. The study of these polymer blends doped TiO2 gives the properties junction organic (polymer) and inorganic (oxide) which leads to modification of the properties of the resultant material. The blends were doped TiO2 (POE/PMMA/TiO2) in different proportions of the PMMA with the PEO and TiO2 fixed. The ratios were: 90/10/0,1; 85/15/0, 1; 80/20/0,1, 75/25/0,1 and 70/30/0,1. The resulting material was obtained in powder form and being characterized by Fourier Transformed Infrared (FTIR) Spectroscopy, Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD), Thermogravimetric Analysis (TGA) and Electrochemical Impedance Spectroscopy (EIS). The infrared spectra (IR) for the blends in different ratios showed a band at 1744 cm-1, characteristic of the C=O stretching, which increases in intensity with increasing PMMA composition, while in the spectrum of pure PEO this band is absent. This may suggest that the interaction is occurring between the polymers. In the micrographs of the blends also observed change in their surfaces with variation of the composition of PMMA, contributing to the change of the electrical properties of the material. The EIS data showed that the material exhibited conductivity of the order of 10-6 S.cm-1. The blend in the ratio B2(85/15/0, 1) showed better conductivity, σ = 1.56 x 10-6 S.cm-1. It was observed that the diffusion coefficient for the blends, B5(70/30/0, 1) was the largest, 1.07 x 10-6 m2.s-1. The XRD data showing that, with the variation in the composition of the PMMA blend crystallinity of the material is decreased reaching a minimum B3(80/20/0,1), and then increases again. Thermal analysis suggests that blends made from the material obtained can be applied at room temperature

Caracterização físico-química de algumas tuberosas amiláceas

As principais fontes de amido comercial no mundo são o milho, a batata e a mandioca. Entretanto, nos últimos anos vem crescendo o interesse em amidos naturais que possam ser utilizados pela indústria alimentícia. Assim, este trabalho teve por objetivo caracterizar, quanto à composição físico-química, açafrão, ahipa, araruta, batata-doce, biri, inhame e mandioquinha-salsa, tuberosas amiláceas potencialmente passíveis de introdução como matérias-primas de interesse comercial. Amostras das tuberosas foram analisadas quanto ao teor de umidade, cinzas, proteína, matéria graxa, açúcares redutores e totais, fibras e amido. Os resultados obtidos mostraram que das tuberosas analisadas as que apresentaram maior teor de amido foram a araruta (Maranta arundinacea), o inhame (Dioscorea sp) e o biri (Canna edulis), sendo que o inhame e o biri apresentaram também o maior rendimento potencial em toneladas de amido/hectare.

Caracterização físico-química de farinhas de mandioca de diferentes localidades do Brasil

A farinha de mandioca (Manihot esculenta Crantz) é produzida em diferentes regiões do Brasil e faz parte do hábito alimentar do brasileiro. Caracteriza-se num alimento de alto valor energético, possui teor elevado de amido, contém fibras e alguns minerais como potássio, cálcio, fósforo, sódio e ferro. Entre os diferentes estados, os do Norte e Nordeste consomem quantidades de farinha de mandioca bem maiores que os demais. Frente à importância econômica e nutricional deste produto, com o presente trabalho, objetivou-se caracterizar farinhas de mandioca de diferentes estados do País, esperando com isso fornecer informações referentes à composição e às características físico-químicas do produto, tanto para as indústrias produtoras quanto aos consumidores. Os resultados obtidos mostraram que, quanto à composição centesimal, as farinhas analisadas diferem entre si e entre as regiões produtoras, inclusive para classificações de mesmo grupo e subgrupo. Para proteínas e acidez, as farinhas não estão de acordo com os limites da legislação. As farinhas apresentam teores baixos a moderados de fibras, contudo, devido ao seu amplo consumo, contribui como importante fornecedor de fibras na alimentação. A classificação de algumas farinhas quanto à cor não está de acordo com as análises de seus componentes de cromaticidade.

Caracterização físico-química da mucilagem de inhame liofilizada

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Composição tecidual e qualidade da gordura na carne de cordeiros castrados e não castrados confinados sob dois fotoperíodos

Avaliaram-se os efeitos do fotoperíodo e da castração sobre a composição dos tecidos da paleta e características de qualidade da gordura do lombo e da paleta, de 20 cordeiros mestiços Ideal, distribuídos em esquema fatorial 2 x 2 (dois fotoperíodos - curto (FC), com 12 horas de luz, e longo (FL), com 18 horas de luz, e duas condições sexuais - não castrados (NC) e castrados (C)), com cinco repetições. Os animais foram abatidos aos 37kg de peso corporal. Maior quantidade de gordura total ocorreu nos cordeiros C e mais tecido conjuntivo nos animais NC. A castração influenciou o resíduo mineral fixo (RMF), o extrato etéreo (EE) e a proteína da gordura subcutânea. O efeito da interação entre fotoperíodo longo e castração resultou em aumento do teor de umidade na gordura intermuscular da paleta. A castração elevou o teor de EE e diminuiu o percentual de RMF. Não foi evidenciado efeito do fotoperíodo no EE dos músculos da paleta, e os animais castrados apresentaram gordura intramuscular mais elevada. Os níveis de colesterol da paleta foram mais elevados que os do lombo. Na carne de animais C, verificou-se maior quantidade de ácidos graxos saturados.

Dose de exposição radiométrica e composição das rochas sedimentares e ígneas na bacia do Rio Corumbataí (SP)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Otimização e validação de metodologia cromatográfica para determinação simultânea de composição monomérica em polímero biodegradável

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Composição e estrutura fitossociológica da regeneração natural na floresta de restinga alta em Picinguaba (Parque Estadual da Serra do Mar) município de Ubatuba, SP, Brasil

Pós-graduação em Ciências Biológicas (Biologia Vegetal) - IBRC

Estudo da composição de meios de cultura para a produção de cefamicina C por Streptomuces clavuligerus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Parâmetros produtivos, composição corporal e qualidade da carne de bovinos nelore criados em regime extensivo em função da idade e peso

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)