Hygrothermal effects on painted carbon fibre composite surfaces

In this article, the effect of hygrothermal aging on the painted surface finish of unidirectional and fabric carbon fibre composite laminates, with and without surfacing film was investigated. The results highlighted the importance of ensuring that the composite surface directly beneath the paint layer is made from a uniform material with a consistent thickness in order to minimise surface defects from occurring during aging. The surfacing film was found to minimise the print through development on the painted unidirectional and twill composite surfaces. However, the surfacing film layer was found to intermingle with the carbon fibre plies during cure, which resulted in an uneven film thickness that caused increased levels of orange peel. The twill laminate painted surface produced high levels of print through and surface waviness that was caused by the large resin rich regions located within the tow intersections at the surface which enlarged due to thermal expansion and swelling of the matrix with hygrothermal aging. It was also noted that the small resin rich regions between the individual carbon fibres on the unidirectional composite surface were sufficiently large to print through the painted surface.

Positron annihilation lifetime spectroscopy of mechanically milled protein fibre powders and their free volume aspects

The present study reports the fabrication of ultra-fine powders from animal protein fibres such as cashmere guard hair, merino wool and eri silk along with their free volume aspects. The respectively mechanically cleaned, scoured and degummed cashmere guard hair, wool and silk fibres were converted into dry powders by a process sequence: Chopping, Attritor Milling, and Spray Drying. The fabricated protein fibre powders were characterised by scanning electron microscope, particle size distribution and positron annihilation lifetime spectroscopy (PALS). The PALS results indicated that the average free volume size in protein fibres increased on their wet mechanical milling with a decrease in the corresponding intensities leading to a resultant decrease in their fractional free volumes.

Effect of fibre, yarn and knitted fabric attributes associated with wool comfort properties

In this replicated experiment, we investigated the comfort properties of single jersey fabrics composed of cashmere in blends with superfine wools of different fibre curvature (crimp) where the fibre diameter of the wool and cashmere were tightly controlled. The 81 fabrics were evaluated using the Wool ComfortMeter (WCM) which has been calibrated using wearer trials of wool knitwear. General linear modelling determined the best prediction models for log10 transformed fabric WCM values using 27 fibre, 16 yarn and 30 fabric attributes. Tighter fabrics were less comfortable. Progressively blending cashmere with wool progressively increased comfort assessment. The WCM was able to detect differences between fabrics which were more supple and springy, thinner and lighter, and were composed of more elastic, uniform and stronger yarns. Together these attributes explained 82% of the variance in WCM value.

Relationship between wearer prickle response with fibre and garment properties and Wool ComfortMeter assessment

The prickle evoked by 48 knitted fabrics was assessed by wearers under a defined evaluation protocol. The relationship between the average wearer prickle score and known properties of constituent fibre, yarns and fabrics and fabric evaluation using the Wool ComfortMeter (WCM) was determined using linear modelling. After log transformation, the best model accounted for 87.7% of the variance. The major share of variation could be attributed to differences between mean fibre diameter (MFD) and WCM values. Low prickle scores were linearly associated with lower MFD, lower WCM and lower yarn linear density. There was an indication that yarn twist affected prickle scores and that fabrics composed of cotton evoked less prickle. Measures of fibre diameter distribution or coarse fibre incidence and other fabric properties were not significant. The analysis indicates that wool garments can be constructed to keep wearer assessed prickle to barely detectable levels and textile designers can manipulate a range of parameters to achieve similar wearer comfort responses.

Fibre properties affecting the softness of wool and other keratins

The emerging market for next-to-skin knitwear requires wool to satisfy the consumer’s tactile requirements for softness. The role of the fibre’s surface and physical properties on fibre and fabric softness was examined. The fibre’s cuticle properties were found to have a greater influence on softness than the fibre’s mechanical properties.