Economic impacts of climate change on agrifood markets: A bio-economic approach with a focus on the EU

Projections for world food production and prices play a crucial role to evaluate and tackle future food security challenges. Understanding how these projections will be affected by climate change is the main objective of this study. By means of a bio-economic approach we assess the economic impacts of climate change on agrifood markets, providing both a global analysis and a regionalised evaluation within the EU. To account for uncertainty, we analyse the IPCC emission scenario A1B for the 2030 horizon under several simulation scenarios that differ in (1) the climate projection, from HadleyCM3 (warm) or ECHAM5 (mild) global circulation models; and (2) the influence of CO2 effects. Results of this study indicate that agrifood market projections to 2030 are very sensitive to climate change uncertainties and, in particular to the magnitude of the carbon fertilization effect.

Bio-based polymer nanocomposites based on nylon 11 and WS2 inorganic nanotubes

Tungsten disulphide nanotubes (INT-WS2) have been successfully dispersed in a bio-based polyamide matrix (nylon 11) by conventional melt processing. The effect of INT-WS2 content on the morphology, thermal stability, crystallization behaviour and dynamic mechanical properties is investigated. The results indicate that these inorganic nanotubes can be efficiently incorporated into the bio-based polymer matrix without the need for modifiers or surfactants. Additionally, it is found that the non-isothermal crystallization behaviour of nylon 11/INT-WS2 depends on both the cooling rate and INT-WS2 concentration. In particular, crystallization kinetics results demonstrate that the nucleating activity of INTs plays a dominant role in accelerating the crystallization of nylon 11. This fact leads to the appearance of the more-disordered phase at higher temperature. More significantly, it was shown that these INT-WS2 nanocomposites can facilitate a good processability and cost efficiency, and will be of interest for many eco-friendly and medical applications.

Análise da combustão e emissões em motores a bio-diesel.

A rápida evolução do mercado automotivo, em função de maiores restrições sobre as emissões, impulsionou a utilização de várias alternativas para melhorias dos motores diesel, entre elas as mudanças nos seus componentes com o auxílio de ferramentas de modelagem e a utilização de combustíveis alternativos. As características dos combustíveis afetarão a queima e, assim, alteram os resíduos do processo de combustão. Novos combustíveis podem também ser utilizados como uma alternativa para veículos de gerações anteriores com o intuito de reduzir as emissões. Este estudo mostra os efeitos da utilização do Biodiesel B20 e do Biodiesel Amyris em motores de combustão interna. Para isso, foram realizados testes de motores em salas dinamométricas, e seus resultados confrontados e discutidos. Além disso, são abordados os efeitos do combustível no processo da combustão. Esta Dissertação está concentrada, principalmente, na emissão de NOx e de material particulado, que são poluentes mais restritivos perante a Legislação brasileira de emissões CONAMA P7.

A Case Study of the Economic and Environmental Impacts from a Bio-fuel Facility (Southwest Georgia Ethanol, LLC) on the Surrounding Communities, Southwest Georgia

Bio-fuels such as ethanol provide an extraordinary opportunity to address our dependency on foreign oil. This case study examines the economic and environmental impacts associated with constructing and operating a dry mill ethanol manufacturing facility in a Southwest Georgia town and surrounding communities. The case study found that the plant had little impact on air quality, water quality, and habitat fragmentation. However, economic results showed the plant produced $1.5 million in tax revenues, and 86 jobs. Ethanol producers and communities must consider both the economic and environmental impacts on a local community when searching or attracting a bio-fuels plant. Likewise, communities should be aware of these challenges when attracting ethanol production plants.

Glutaraldehyde in bio-catalysts design: a useful crosslinker and a versatile tool in enzyme immobilization

Glutaraldehyde is one of the most widely used reagents in the design of biocatalysts. It is a powerful crosslinker, able to react with itself, with the advantages that this may bring forth. In this review, we intend to give a general vision of its potential and the precautions that must be taken when using this effective reagent. First, the chemistry of the glutaraldehyde/amino reaction will be commented upon. This reaction is still not fully clarified, but it seems to be based on the formation of 6-membered heterocycles formed by 5 C and one O. Then, we will discuss the production of intra- and inter-molecular enzyme crosslinks (increasing enzyme rigidity or preventing subunit dissociation in multimeric enzymes). Special emphasis will be placed on the preparation of cross-linked enzyme aggregates (CLEAs), mainly in enzymes that have low density of surface reactive groups and, therefore, may be problematic to obtain a final solid catalyst. Next, we will comment on the uses of glutaraldehyde in enzymes previously immobilized on supports. First, the treatment of enzymes immobilized on supports that cannot react with glutaraldehyde (only inter and intramolecular cross-linkings will be possible) to prevent enzyme leakage and obtain some enzyme stabilization via cross-linking. Second, the cross-linking of enzymes adsorbed on aminated supports, where together with other reactions enzyme/support crosslinking is also possible; the enzyme is incorporated into the support. Finally, we will present the use of aminated supports preactivated with glutaraldehyde. Optimal glutaraldehyde modifications will be discussed in each specific case (one or two glutaraldehyde molecules for amino group in the support and/or the protein). Using preactivated supports, the heterofunctional nature of the supports will be highlighted, with the drawbacks and advantages that the heterofunctionality may have. Particular attention will be paid to the control of the first event that causes the immobilization depending on the experimental conditions to alter the enzyme orientation regarding the support surface. Thus, glutaraldehyde, an apparently old fashioned reactive, remains the most widely used and with broadest application possibilities among the compounds used for the design of biocatalyst.

Footwear bio-modelling: An industrial approach

There is a growing need within the footwear sector to customise the design of the last from which a specific footwear style is to be produced. This customisation is necessary for user comfort and health reasons, as the user needs to wear a suitable shoe. For this purpose, a relationship must be established between the user foot and the last with which the style will be made; up until now, no model has existed that integrates both elements. On the one hand, traditional customised footwear manufacturing techniques are based on purely artisanal procedures which make the process arduous and complex; on the other hand, geometric models proposed by different authors present the impossibility of implementing them in an industrial environment with limited resources for the acquisition of morphometric and structural data for the foot, apart from the fact that they do not prove to be sufficiently accurate given the non-similarity of the foot and last. In this paper, two interrelated geometric models are defined, the first, a bio-deformable foot model and the second, a deformable last model. The experiments completed show the goodness of the model, with it obtaining satisfactory results in terms of comfort, efficiency and precision, which make it viable for use in the sector.

Bio-based PLA_PHB plasticized blend films: Processing and structural characterization

Bio-based films formed by poly(lactic acid) (PLA) and poly(3-hydroxybutyrate) (PHB) plasticized with an oligomer of the lactic acid (OLA) were used as supporting matrices for an antibacterial agent (carvacrol). This paper reports the main features of the processing and physico-chemical characterization of these innovative biodegradable material based films, which were extruded and further submitted to filmature process. The effect of the addition of carvacrol and OLA on their microstructure, chemical, thermal and mechanical properties was assessed. The presence of these additives did not affect the thermal stability of PLA_PHB films, but resulted in a decrease in their crystallinity and in the elastic modulus for the active formulations. The obtained results showed the effective presence of additives in the PLA or the PLA_PHB matrix after processing at high temperatures, making them able to be used in active and bio-based formulations with antioxidant/antimicrobial performance.

Bio-renewable enantioselective aldol reaction in natural deep eutectic solvents

Among the deep eutectic solvents (DES), natural deep eutectic solvents (NADES) formed by D-glucose and racemic malic acid are suitable media to perform the enantioselective L-proline catalyzed intermolecular aldol reaction, creating simultaneously and selectively a C–C bond and a new stereocenter. The scope of the reaction was found to be broad, with products being obtained with good levels of diastereo- and enantioselectivities. Furthermore, when the reaction was performed at a large scale, the catalyst together with the reaction media can be recovered by simple water extraction and reused at least three times affording similar results. Therefore, the use of NADES as reaction media to carry out a VOC-free selective process has been demonstrated for the first time. The process is clean, cheap, simple and scalable and meets most of the criteria to be considered as a sustainable and bio-renewable process, with the reaction media and catalyst arising directly from Nature.

CIMBNC- Combination and interactions of three kinds of nanoclays structural modifiers, for the colored bio-nanocomposites optimization

Biopolymers do not have competitive prices, which has prevented their industrial exploitation on a global scale so far. In this context, Using nanoclays, improvements in certain biopolymer properties, mainly mechanical and thermal, have been achieved. However, research has been much less focused on changing optical properties through the incorporation of nanoclays. At the same time, current research has focused on obtaining nanopigments, by organic dyes adsoptions into different nanoclays in order to achieve sustainable colouring and high performance materials. By combining advances in these lines of research, biodegradable composites with optimal mechanical and optical properties can be obtained. The aim of this work is to find the optimal formulation of naturally sourced nanopigments, incorporate them into a biological origin epoxy resin, and obtain a significant improvement in their mechanical, and optical properties. We combine three structural modifiers in the nanopigment synthesis: surfactant, silane and mordant salt. The latter was selected in order to replicate the mordant textile dyeing with natural dyes. Using a Taguchi’s desing L8, we look for the effect of the presence of the modifiers, the pH acidification, and the interactions effect between the synthesis factors. Three natural dyes were selected: chlorophyll, beta-carotene, and beetroot extract. Furthermore we use two kinds of laminar nanoclays, differentiated by the ion exchange charge: montmorillonite, and hydrotalcite. Then the thermal, mechanical and colorimetric characterization of the bionanocomposite materials was carried out. The optimal conditions to obtain the best bionanocomposite materials are using acid pH, and modifying the nanoclays with mordant and surfactant.

APROXIMACIÓN AL DISEÑO DE SISTEMAS DE BIO-REACTORES PARA LA DELIGNIFICACIÓN DE MATERIALES LIGNOCELULÓSICOS Y PARA LA DECONTAMINACIÓN DE SUELOS Y EFLUENTES

Los materiales lignocelulósicos residuales de las actividades agroindustriales pueden ser aprovechados como fuente de lignina, hemicelulosa y celulosa. El tratamiento químico del material lignocelulósico se debe enfrentar al hecho de que dicho material es bastante recalcitrante a tal ataque, fundamentalmente debido a la presencia del polímero lignina. Esto se puede lograr también utilizando hongos de la podredumbre blanca de la madera. Estos producen enzimas lignolíticas extracelulares fundamentalmente Lacasa, que oxida la lignina a CO2. Tambien oxida un amplio rango de sustratos ( fenoles, polifenoles, anilinas, aril-diaminas, fenoles metoxi-sustituídos, y otros), lo cual es una buena razón de su atracción para aplicaciones biotecnológicas. La enzima tiene potencial aplicación en procesos tales como en la delignificación de materiales lignocelulósicos y en el bioblanqueado de pulpas para papel, en el tratamiento de aguas residuales de plantas industriales, en la modificación de fibras y decoloración en industrias textiles y de colorantes, en el mejoramiento de alimentos para animales, en la detoxificación de polutantes y en bioremediación de suelos contaminados. También se la ha utilizado en Q.Orgánica para la oxidación de grupos funcionales, en la formación de enlaces carbono- nitrógeno y en la síntesis de productos naturales complejos. HIPOTESIS Los hongos de podredumbre blanca, y en condiciones óptimas de cultivo producen distintos tipos de enzimas oxidasas, siendo las lacasas las más adecuadas para explorarlas como catalizadores en los siguientes procesos:  Delignificación de residuos de la industria forestal con el fin de aprovechar tales desechos en la alimentación animal.  Decontaminación/remediación de suelos y/o efluentes industriales. Se realizarán los estudios para el diseño de bio-reactores que permitan responder a las dos cuestiones planteadas en la hipótesis. Para el proceso de delignificación de material lignocelulósico se proponen dos estrategias: 1- tratar el material con el micelio del hongo adecuando la provisión de nutrientes para un desarrollo sostenido y favorecer la liberación de la enzima. 2- Utilizar la enzima lacasa parcialmente purificada acoplada a un sistema mediador para oxidar los compuestos polifenólicos. Para el proceso de decontaminación/remediación de suelos y/o efluentes industriales se trabajará también en dos frentes: 3) por un lado, se ha descripto que existe una correlación positiva entre la actividad de algunas enzimas presentes en el suelo y la fertilidad. En este sentido se conoce que un sistema enzimático, tentativamente identificado como una lacasa de origen microbiano es responsable de la transformación de compuestos orgánicos en el suelo. La enzima protege al suelo de la acumulación de compuestos orgánicos peligrosos catalizando reacciones que involucran degradación, polimerización e incorporación a complejos del ácido húmico. Se utilizarán suelos incorporados con distintos polutantes( por ej. policlorofenoles ó cloroanilinas.) 4) Se trabajará con efluentes industriales contaminantes (alpechínes y/o el efluente líquido del proceso de desamargado de las aceitunas).

NANO(BIO)SENSORES ELECTROQUIMICOS Y PLASMÓNICOS: DISEÑO, CARACTERIZACIÓN Y APLICACIONES PARA LA CUANTIFICACION DE BIOMARCADORES DE ALTO IMPACTO

En Argentina, en consonancia con el resto del mundo, la Nanotecnología es considerada un área estratégica. Sin embargo, las investigaciones en Nanobiotecnología todavía constituyen un área de vacancia. El uso de nanomateriales para desarrollar plataformas bioanalíticas que permitan la construcción de biosensores ofrece múltiples ventajas y una promisoria perspectiva de aplicación en diversas áreas. En la actualidad, los laboratorios de análisis clínicos, la industria farmacéutica y alimentaria, y los laboratorios de control bromatológico y ambiental requieren de metodologías analíticas que proporcionen resultados exactos, reproducibles, rápidos, sensibles y selectivos empleando pequeños volúmenes de muestra, con un mínimo consumo de reactivos y una producción de deshechos limpia y escasa. Las investigaciones en nanobiosensores se encuentran dirigidas hacia el logro de estas metas. Uno de los grandes desafíos es lograr biosensores miniaturizados con potencialidad para el desarrollo de dispositivos de medición descentralizada (“point of care”) y la detección simultánea de multianalitos. Aún cuando se han hecho innumerables desarrollos en los casi 50 años de vida de los biosensores, todavía hay numerosos interrogantes por dilucidar. La modificación con nanomateriales juega un rol preponderante en los transductores tanto en los electroquímicos como en los plasmónicos. El uso de películas delgadas de Au para SPR modificadas con grafeno u óxido de grafeno, es un campo de una enorme potencialidad y sin embargo es muy poco explotado, por lo que reviste gran importancia. En lo referido a la capa de biorreconocimiento, se trabajará con moléculas capaces de establecer interacciones de bioafinidad, como los anticuerpos y también moléculas que son muy poco usadas en nuestro país y en Latinoamérica como ADN, aptámeros, PNA y lectinas. RESUMEN: El Objetivo general de este proyecto es desarrollar nuevas plataformas bioanalíticas para la detección de diferentes eventos de bioafinidad a partir de la integración de transductores electroquímicos (EQ) y plasmónicos con materiales nanoestructurados (nanotubos de carbono, nanoláminas de grafeno, nanoalambres metálicos); biomoléculas (ADN, “peptide nucleic acid” (PNA), aptámeros, anticuerpos, lectinas) y polímeros funcionalizados con moléculas bioactivas. Las arquitecturas supramoleculares resultantes estarán dirigidas al desarrollo de biosensores EQ y plasmónicos para la cuantificación de biomarcadores de relevancia clínica y medioambiental. Se funcionalizarán CNT, grafeno, óxido de grafeno, nanoalambres metálicos empleando homopéptidos y proteínas con alta afinidad por cationes metálicos, los que se integrarán a transductores de carbono y oro y biomoléculas de reconocimiento capaces de formar complejos de afinidad (antígeno-anticuerpo, aptámero-molécula blanco, ADN-ADN, PNA-ADN, lectinas-hidratos de carbono, ligandos-cationes metálicos y avidina-biotina). Se sintetizarán y caracterizarán nuevos monómeros y polímeros funcionalizados con moléculas bioactivas y/o grupos rédox empleando diferentes rutas sintéticas. Se desarrollarán genosensores para la detección del evento de hibridación de secuencias de interés médico (cáncer de colon y de mama, tuberculosis); aptasensores para la detección de marcadores proteicos de T. cruzi, enfermedades cardiovasculares y contaminantes catiónicos; inmunosensores para la detección de biomarcadores proteicos relacionados con enfermedades cardiovasculares y cáncer; y biosensores de afinidad con lectinas para la detección de hidratos de carbono. La caracterización de las plataformas y las señales analíticas se obtendrán empleando las siguientes técnicas: voltamperometrías cíclica, de pulso diferencial y de onda cuadrada; stripping; resonancia de plasmón superficial; espectroscopía de impedancia electroquímica; microscopías de barrido electroquímico, SEM, TEM, AFM,SNOM, espectroscopías: UV-vis, FTIR,Raman;RMN, TGA y DSC.