A standard operation procedure and a pilot water testing for herbicides in northwest Harris County, Texas

Herbicides are used to control the growth of weeds along highways, power lines, and many other urban locations. Exposure to herbicides has been linked to adverse health outcomes. This study was initiated to pretest for the presence of herbicides in multiple water sources near intersections in a corridor in the Northwest Harris County (specifically in the Highway 6/FM 1960, North Freeway 45, US 290 and S 99 corridor). Roadside water and tap water samples were collected and analyzed for herbicides using the established Environmental Protection Agency (EPA) Method 515.4: "Determination of Chlorinated Acids in Drinking Water by Liquid-Liquid Micro-extraction, Derivatization, and Fast Gas Chromatography with Electron Capture Detection." A standard operating procedure (adapted from the US EPA Method 515.4) was developed for subsequent, larger studies of environmental fate of herbicides and non-occupational exposure risks. Preliminary testing of 16 water samples was performed to pretest the existence of trace herbicides; all concentrations that were greater than the minimum reporting limits of each analyte are reported with a 99 percent confidence. This study failed to find concentrations above the limits of detection of the method in any of the samples collected on June 15, 2008. However, this does not indicate that the waters around the NW Harris County are free of herbicides and metabolites. A larger and repeated sampling in the region would be necessary to make that claim. ^

Procedure for the identification of population characteristics for targeting intervention services on the basis of outcome-goal priorities: Case management services for the chronic mentally ill

Although the processes involved in rational patient targeting may be obvious for certain services, for others, both the appropriate sub-populations to receive services and the procedures to be used for their identification may be unclear. This project was designed to address several research questions which arise in the attempt to deliver appropriate services to specific populations. The related difficulties are particularly evident for those interventions about which findings regarding effectiveness are conflicting. When an intervention clearly is not beneficial (or is dangerous) to a large, diverse population, consensus regarding withholding the intervention from dissemination can easily be reached. When findings are ambiguous, however, conclusions may be impossible.^ When characteristics of patients likely to benefit from an intervention are not obvious, and when the intervention is not significantly invasive or dangerous, the strategy proposed herein may be used to identify specific characteristics of sub-populations which may benefit from the intervention. The identification of these populations may be used both in further informing decisions regarding distribution of the intervention and for purposes of planning implementation of the intervention by identifying specific target populations for service delivery.^ This project explores a method for identifying such sub-populations through the use of related datasets generated from clinical trials conducted to test the effectiveness of an intervention. The method is specified in detail and tested using the example intervention of case management for outpatient treatment of populations with chronic mental illness. These analyses were applied in order to identify any characteristics which distinguish specific sub-populations who are more likely to benefit from case management service, despite conflicting findings regarding its effectiveness for the aggregate population, as reported in the body of related research. However, in addition to a limited set of characteristics associated with benefit, the findings generated, a larger set of characteristics of patients likely to experience greater improvement without intervention. ^

INTAKE VARIABLES AS PREDICTORS OF ASSESSMENT AND REFERRAL PROCEDURE OUTCOMES IN EMPLOYEE ASSISTANCE PROGRAMS

While reported prevalence rates of troubled employees vary considerably, even conservative estimates indicate a major public health problem. For example, alcohol and drug related problems alone cost U.S. industry more than 45 billion dollars annually.^ Of the alternatives available to deal with these problems, e.g., dismissal or disciplinary actions, the most viable and cost effective are employee assistance programs (EAP), designed to provide professional assistance to employees experiencing alcohol, drug, emotional or personal crisis.^ The principal component of an EAP is that of assessment and referral, and this study was developed to determine which EAP client intake variables are the most efficacious predictors of assessment and referral procedures.^ Although, specific client intake variables were statistically significant the discriminant classification analysis was demonstrably inadequate. Nevertheless, the identification of A/R procedure phases which were not efficacious, as well as EAP client populations for whom services were not effective, were extremely valuable discernments. Identifying the less efficacious components of the A/R process provided an opportunity to recommend alternatives to current program procedures and practices, which may ameliorate program effectiveness. ^

Development of a standard sign-out procedure for clinicians in a pediatric intensive care unit

Background: Poor communication among health care providers is cited as the most common cause of sentinel events involving patients. Sign-out of patient data at the change of clinician shifts is a component of communication that is especially vulnerable to errors. Sign-outs are particularly extensive and complex in intensive care units (ICUs). There is a paucity of validated tools to assess ICU sign-outs. ^ Objective: To design a valid and reliable survey tool to assess the perceptions of Pediatric ICU (PICU) clinicians about sign-out. ^ Design: Cross-sectional, web-based survey ^ Setting: Academic hospital, 31-bed PICU ^ Subjects: Attending faculty, fellows, nurse practitioners and physician assistants. ^ Interventions: A survey was designed with input from a focus group and administered to PICU clinicians. Test-retest reliability, internal consistency and validity of the survey tool were assessed. ^ Measurements and Main Results: Forty-eight PICU clinicians agreed to participate. We had 42(88%) and 40(83%) responses in the test and retest phases. The mean scores for the ten survey items ranged from 2.79 to 3.67 on a five point Likert scale with no significant test-retest difference and a Pearson correlation between pre and post answers of 0.65. The survey item scores showed internal consistency with a Cronbach's Alpha of 0.85. Exploratory factor analysis revealed three constructs: efficacy of sign-out process, recipient satisfaction and content applicability. Seventy eight % clinicians affirmed the need for improvement of the sign-out process and 83% confirmed the need for face- to-face verbal sign-out. A system-based sign-out format was favored by fellows and advanced level practitioners while attendings preferred a problem-based format (p=0.003). ^ Conclusions: We developed a valid and reliable survey to assess clinician perceptions about the ICU sign-out process. These results can be used to design a verbal template to improve and standardize the sign-out process.^

Functional analysis of the sea urchin {\it orthodenticle\/} -related gene, {\it SPOTX\/}, in aboral ectoderm-specific gene activation and aboral ectoderm cell fate specification

An important question in developmental biology is how embryonic cell types are derived from a fertilized egg. To address this question, this thesis investigates the mechanisms by which the aboral ectoderm-specific Spec2a gene is spatially and temporally regulated during sea urchin embryogenesis. The Spec2a gene of the sea urchin Strongylocentratus purpuratus has served as a valuable maker to understand the basis of lineage-specific gene activation and the role of transcription factors in cell fate specification. The hypothesis is that transcription factors responsible for cell type-specific gene activation are key components in the initial cell specification step. The Spec2a gene, which encodes a small cytosolic calcium-binding protein, is expressed exclusively in aboral ectoderm cell lineages. The 1516-bp control region of the Spec2a gene contains a 188-bp enhancer element required for temporal activation and aboral ectoderm/mesenchyme cell expression, while an unidentified element upstream of the enhancer represses expression in mesenchyme cells. Using an enhancer activation assay, combined with site-directed mutagenesis, I showed that three TAATCC/T sites within the enhancer are responsible for enhancer activity. Mutagenizing these sites and a fourth one just upstream abolished all activity from the Spec2a control region. A 77-bp DNA fragment from the Spec2a enhancer containing two of the TAATCC/T sites is sufficient for aboral ectoderm/mesenchyme cell expression. A cDNA encoding SpOtx, an orthodenticle-related protein, was cloned from S. purpuratus and shown to bind with high affinity to the TAATCC/T sequences within the Spec2a control region. SpOtx transcripts were found initially in all cells of the cleaving embryo, but they gradually became restricted to oral ectoderm and endoderm cells, suggesting that SpOtx might play a role in the initial temporal activation of the Spec2a gene and most likely has additional functions in the developing embryo. To reveal the broader biological functions of SpOtx, I injected SpOtx mRNA into living sea urchin eggs to determine what effects overexpressing the SpOtx protein might have on embryo development. SpOtx mRNA-injected embryos displayed dramatic alterations in development. Instead of developing into pluteus larvae with 15 different cell types, uniform epithelia balls were formed. These balls consisted of a thin layer of squamous cells with short cilia highly reminiscent of aboral ectoderm. Immunohistochemical staining and RT-PCR demonstrated that the SpOtx-injected embryoids expressed aboral ectoderm markers uniformly, but showed very weak or no expression of markers for non-aboral ectoderm cell types. These data strongly suggested that overexpression of SpOtx redirected the normal fate of non-aboral ectoderm cells to that of aboral ectoderm. These results show that SpOtx is involved in aboral ectoderm differentiation by activating aboral ectoderm-specific genes and that modulating its expression can lead to changes in cell fate. ^

Mineralogy and structural specification of ODP Leg 125 peridotite samples

Abundant serpentinite seamounts are found along the outer high of the Mariana forearc at the top of the inner slope of the trench. One of them, Conical Seamount, was drilled at Sites 778, 779, and 780 during Leg 125. The rocks recovered at Holes 779A and 780C, respectively, on the flanks and at the summit of the seamount, include moderately serpentinized depleted harzburgites and some dunites. These rocks exhibit evidence of resorption of the orthopyroxene, when present, and the local presence of very calcic-rich diopside in veins oblique to the main high-temperature foliation of the rock. The peridotites, initially well-foliated with locally poikiloblastic textures, show overprints of a two-stage deformation history: (1) a high-temperature (>1000°C), low-stress (0.02 GPa), homogeneous deformation that has led to the present Porphyroclastic textures displayed by the rocks and (2) heterogeneous ductile shearing at a much higher stress (0.05 GPa). This heterogeneous shearing probably describes a single tectonic event because it began at high temperatures, producing dynamic recrystallization of olivine in the shear zone, and ended at low temperatures in the stability field of chlorite and serpentine. In a few samples, olivine shows evidence of quasi-hydrostatic recrystallization at a very high temperature. Here, we propose that this recrystallization was related to fluid/magma percolation, a process that can also account for the resorption of the orthopyroxene and for the late crystallization of diopside veins in the rock. The impregnation by fluid or magma, development of the main high-temperature, low-stress deformation, and subsequent migration recrystallization of olivine probably occurred in a mantle fragment involved in the arc formation. In addition, this mantle has preserved structures that may have formed earlier in the oceanic lithosphere upon which the arc formed. Heterogeneous ductile shear zones in the peridotites may have developed during uplift. The "cold" deformation may have taken place during diapiric rise of hot mantle that underwent subsequent serpentinization or gliding along normal faults associated with the extension of the eastern margin of the forearc.

The dynamic evaluation of the learning potential: a procedure

Fil: Malbrán, María del Carmen. Universidad Nacional de La Plata. Facultad de Humanidades y Ciencias de la Educación; Argentina.

The dynamic evaluation of the learning potential: a procedure

Fil: Malbrán, María del Carmen. Universidad Nacional de La Plata. Facultad de Humanidades y Ciencias de la Educación; Argentina.

Simulation analysis of the EU ELV/RoHS directives based on an applied general equilibrium model with Melitz-type trade specification

This paper explores the potential usefulness of an AGE model with the Melitz-type trade specification to assess economic effects of technical regulations, taking the case of the EU ELV/RoHS directives as an example. Simulation experiments reveal that: (1) raising the fixed exporting cost to make sales in the EU market brings results that exports of the targeted commodities (motor vehicles and parts for ELV and electronic equipment for RoHS) to the EU from outside regions/countries expand while the domestic trade in the EU shrinks when the importer's preference for variety (PfV) is not strong; (2) if the PfV is not strong, policy changes that may bring reduction in the number of firms enable survived producers with high productivity to expand production to be large-scale mass producers fully enjoying the fruit of economies of scale; and (3) When the strength of the importer's PfV is changed from zero to unity, there is the value that totally changes simulation results and their interpretations.

Development of Robotized Laser Welding Applications for Joining Thin Sheets

Laser Welding (LW) is more often used in manufacturing due to its advantages, such as accurate control, good repeatability, less heat input, opportunities for joining of special materials, high speed, capability to join small dimension parts etc. LW is dedicated to robotized manufacturing, and the fabrication cells are using various level of flexibility, from specialized robots to very flexible setups. This paper features several LW applications using two industrially-scaled manufacturing cells at UPM Laser Centre (CLUPM) of Polytechnical University of Madrid (Universidad Politécnica de Madrid). The one dedicated to Remote Laser Welding (RLW) of thin sheets for automotive and other sectors uses a CO2 laser of 3500 W. The second has a high flexibility, is based on a 6-axis ABB robot and a Nd:YAG laser of 3300 W, and is meant for various laser processing methods, including welding. After a short description of each cell, several LW applications experimented at CLUPM and recently implemented in industry are briefly presented: RLW of automotive coated sheets, LW of high strength automotive sheets, LW vs. laser hybrid welding (LHW) of Double Phase steel thin sheets, and LHW of thin sheets of stainless steel and carbon steel (dissimilar joints). The main technological issues overcame and the critical process parameters are pointed out. Conclusions about achievements and trends are provided.

Analysis of the Fracture of Reinforced Concrete Flat Elements Subjected to Explosions. Experimental Procedure and Numerical Validation

Many of the material models most frequently used for the numerical simulation of the behavior of concrete when subjected to high strain rates have been originally developed for the simulation of ballistic impact. Therefore, they are plasticity-based models in which the compressive behavior is modeled in a complex way, while their tensile failure criterion is of a rather simpler nature. As concrete elements usually fail in tensión when subjected to blast loading, available concrete material models for high strain rates may not represent accurately their real behavior. In this research work an experimental program of reinforced concrete fíat elements subjected to blast load is presented. Altogether four detonation tests are conducted, in which 12 slabs of two different concrete types are subjected to the same blast load. The results of the experimental program are then used for the development and adjustment of numerical tools needed in the modeling of concrete elements subjected to blast.