(Table 1, page 171) Thorium and cobalt content of the total aggregate of manganese nodules from various locations

A criterion is suggested for discrimination between ferromanganese oxide minerals, deposited after the introduction of manganese and associated elements in sea water solution at submarine vulcanism, and minerals which are slowly formed from dilute solution, largely of continental origin. The simlultaneous injection of thorium into the ocean by submarine vulcanism is indicated, and its differentiation from continental thorium introduced into the ocean by runoff is discussed.

Annotated record of the detailed examination of Mn nodules recovered from the VA04 expedition (R/V Valdivia) in the Pacific Ocean

Twenty-four manganese nodules from the surface of the sea floor and fifteen buried nodules were studied. With three exceptions, the nodules were collected from the area covered by Valdivia Cruise VA 04 some 1200 nautical miles southeast of Hawaii. Age determinations were made using the ionium method. In order to get a true reproduction of the activity distribution in the nodules, they were cut in half and placed for one month on nuclear emulsion plates to determine the alpha-activity of the ionium and its daughter products. Special methods of counting the alpha-tracks resolution to depth intervals of 0.125 mm. For the first time it was possible to resolve zones of rapid growth (impulse growth) with growth rates, s > 50 mm/106 yr and interruptions in growth. With few exceptions the average rate of growth of all nodules was surprisingly uniform at 4-9 mm/10 yr. No growth could be recognized radioactively in the buried nodules. One exceptional nodule has had recent impulse growth and, in the material formed, the ionium is not yet in equilibrium with its daughter products. Individual layers in one nodule from the Indian Ocean could be dated and an average time interval of t = 2600±400 yr was necessary to form one layer. The alternation between iron and manganese-rich parts of the nodules was made visible by colour differences resulting from special treatment of cut surfaces with HCl vapour. The zones of slow growth of one nodule are relatively enriched in iron. Earlier attempts to find paleomagnetic reversals in manganese nodules have been continued. Despite considerable improvement in areal resolution, reversals were not detected in the nodules studied. Comparisons of the surface structure, microstructure in section and the radiometric dating show that there are erosion surfaces and growth surfaces on the outer surfaces of the manganese nodules. The formation of cracks in the nodules was studied in particular. The model of age-dependent nodule shrinkage and cracking surprisingly indicates that the nodules break after exceeding a certain age and/or size. Consequently, the breaking apart of manganese nodules is a continuous process not of catastrophic or discontinuous origin. The microstructure of the nodules exhibits differences in the mechanism of accretion and accretion rate of material, shortly referred to as accretion form. Thus non-directional growth inside the nodules as well as a directional growth may be observed. Those nodules with large accretion forms have grown faster than smaller ones. Consequently, parallel layers indicate slow growth. The upper surfaces of the nodules, protruding into the bottom water appear to be more prone to growth disturbances than the lower surfaces, immersed in the sediment. Features of some nodules show, that as they develop, they neither turned nor rolled. Yet unknown is the mechanism that keeps the nodules at the surface during continuous sedimentation. All in all, the nodules remain the objects of their own distinctive problems. The hope of using them as a kind of history book still seems to be very remote.

Geochemistry on manganese nodules from the central Pacific

During Cruise VA 04/2 of the R. V. Valdivia in 1972, numerous samples were collected of manganese nodules, sodiments, and the pore water of the Sediments in the area betwoen 6° N and 11° N and between 149° W and 154° W in the Central Pacific. This paper reports on the geochemical study of 70 manganese nodules from 12 stations (box-core and dredge samples). The nodules Irom a single Station vary considerably in diemical composition. These variations are of the same magnitude as the variations in nodule composition over the entire survey area. The ratios of manganese to nickel, copper, and zinc show good positive correlation as do the ratios of iron to lead and, to a lesser extent, of iron to cobalt. No correlation was found between the environment of the manganese nodules and their metal content. Three internal zones, the outer. intermediate, and core zones, of some nodules were studied in detail. Trends of differences of Chemical composition from surface to core were found for numerous elements and elemental ratios.

Geochemical composition of nodules and crusts from the Indian Ocean recovered from R/V Marion Dufresne expeditions from 1977 until 1981

Following the launch of the "Marion Dufresne 1", first supply ship of the Terres Australes and Antarctiques Françaises and part time oceanographic vessel in the Indian Ocean, a new marine geology program was developped at the Laboratoire de Géologie, MNHN. The first oceanographic cruise of the "Marion Dufresne 1" started in 1973 in the Southwestern Indian Ocean (OSIRIS I cruise). Forty piston-cores recovered nearly 200 m of sediments consisting in the first of the 450 cores of the Indian Ocean collection now deposited at the Museum. L. Leclaire being Director from 1980 to 1991, a multidisciplinary team (including sedimentologists and micropaleontologists) was involved in many oceanographic cruises in the Indian Ocean. Marine sedimentology was developped during annual cruises programs in collaboration with geophysicists, geochemists, and biologists. In 1995, the "Marion Dufresne 2" replaced the initial "Marion Dufresne 1".

Observations and rare earth element composition of manganese nodules during Atlantis cruise AT266, Blake Plateau

An area of about 22,000 km² on the northern Blake Plateau, off the coast of South Carolina, contains an estimated 2 billion metric tons of phosphorite concretions, and about 1.2 billion metric tons of mixed ferromanganese-phosphorite pavement. Other offshore phosphorites occur between the Blake Plateau and known continental deposits, buried under variable thicknesses of sediments. The phosphorite resembles other marine phosphorites in composition, consisting primarily of carbonate-fluorapatite, some calcite, minor quartz and other minerals. The apatite is optically pseudo-isotropic and contains about 6% [CO3]**2- replacing [PO4]**3- in its structure. JOIDES drillings and other evidence show that the phosphorite is a lag deposit derived from Miocene strata correlatable with phosphatic Middle Tertiary sediments on the continent. It has undergone variable cycles of erosion, reworking, partial dissolution and reprecipitation. Its present form varies from phosphatized carbonate debris, loose pellets, and pebbles, to continuous pavements, plates, and conglomeratic boulders weighing hundreds of kilograms. No primary phosphatization is currently taking place on the Blake Plateau. The primary phosphate-depositing environment involved reducing conditions and required at least temporary absence of the powerful Gulf Stream current that now sweeps the bottom of the Blake Plateau and has eroded away the bulk of the Hawthorne-equivalent sediments with which the phosphorites were once associated.

(Table 1, page 1376) Chemical analyses of manganese nodules and crusts from the Pacific Ocean

A compilation of chemical analyses of Pacific Ocean nodules using an x-ray fluorescence technique. The equipment used was a General Electric XRD-5 with a tungsten tube. Lithium fluoride was used as the diffraction element in assaying for all elements above calcium in the atomic table and EDDT was used in conjunction with a helium path for all elements with an atomic number less than calcium. Flow counters were used in conjunction with a pulse height analyzer to eliminate x-ray lines of different but integral orders in gathering count data. The stability of the equipment was found to be excellent by the author. The equipment was calibrated by the use of standard ores made from pure oxide forms of the elements in the nodules and carefully mixed in proportion to the amounts of these elements generally found in the manganese nodules. Chemically analyzed standards of the nodules themselves were also used. As a final check, a known amount of the element in question was added to selected samples of the nodules and careful counts were taken on these samples before and after the addition of the extra amount of the element. The method involved the determination and subsequent use of absorption and activation factors for the lines of the various elements. All the absorption and activation factors were carefully determined using the standard ores. The chemically analyzed samples of the nodules by these methods yielded an accuracy to at least three significant figures.