Mechanical behaviours of pumpkin peel under compression test

Mechanical damages such as bruising, collision and impact during food processing stages diminish quality and quantity of productions as well as efficiency of operations. Studying mechanical characteristics of food materials will help to enhance current industrial practices. Mechanical properties of fruits and vegetables describe how these materials behave under loading in real industrial operations. Optimizing and designing more efficient equipments require accurate and precise information of tissue behaviours. FE modelling of food industrial processes is an effective method of studying interrelation of variables during mechanical operation. In this study, empirical investigation has been done on mechanical properties of pumpkin peel. The test was a part of FE modelling and simulation of mechanical peeling stage of tough skinned vegetables. The compression test has been conducted on Jap variety of pumpkin. Additionally, stress strain curve, bio-yield and toughness of pumpkin skin have been calculated. The required energy for reaching bio-yield point was 493.75, 507.71 and 451.71 N.mm for 1.25, 10 and 20 mm/min loading speed respectively. Average value of force in bio-yield point for pumpkin peel was 310 N.

Numerical exploration of the defect’s effect on mechanical properties of nanowires under torsion

Molecular dynamics (MD) simulations have been carried out to investigate the defect’s effect on the mechanical properties of single-crystal copper nanowire with different surface defects, under torsion deformation. The torsional rigidity is found insensitive to the surface defects and the critical angle appears an obvious decrease due to the surface defects, the largest decrease is found for the nanowire with surface horizon defect. The deformation mechanism appears different degrees of influence due to surface defects. The surface defects play a role of dislocation sources. Comparing with single intrinsic stacking faults formation for the perfect nanowire, much affluent deformation processes have been activated because of surface defects, for instance, we find the twins formation for the nanowire with a surface 45o defect.

Library and information science education 2.0 : guiding principles and models of best practice ALTC Fellowship Report

This ALTC Teaching Fellowship aimed to establish Guiding Principles for Library and Information Science Education 2.0. The aim was achieved by (i) identifying the current and anticipated skills and knowledge required by successful library and information science (LIS) professionals in the age of web 2.0 (and beyond), (ii) establishing the current state of LIS education in Australia in supporting the development of librarian 2.0, and in doing so, identify models of best practice. The fellowship has contributed to curriculum renewal in the LIS profession. It has helped to ensure that LIS education in Australia continues to meet the changing skills and knowledge requirements of the profession it supports. It has also provided a vehicle through which LIS professionals and LIS educators may find opportunities for greater collaboration and more open communication. This will help bridge the gap between LIS theory and practice and will foster more authentic engagement between LIS education and other parts of the LIS industry in the education of the next generation of professionals. Through this fellowship the LIS discipline has become a role model for other disciplines who will be facing similar issues in the coming years. Eighty-one members of the Australian LIS profession participated in a series of focus groups exploring the current and anticipated skills and knowledge needed by the LIS professional in the web 2.0 world and beyond. Whilst each focus group tended to draw on specific themes of interest to that particular group of people, there was a great deal of common ground. Eight key themes emerged: technology, learning and education, research or evidence-based practice, communication, collaboration and team work, user focus, business savvy and personal traits. It was acknowledged that the need for successful LIS professionals to possess transferable skills and interpersonal attributes was not new. It was noted however that the speed with which things are changing in the web 2.0 world was having a significant impact and that this faster pace is placing a new and unexpected emphasis on the transferable skills and knowledge. It was also acknowledged that all librarians need to possess these skills, knowledge and attributes and not just the one or two role models who lead the way. The most interesting finding however was that web 2.0, library 2.0 and librarian 2.0 represented a ‘watershed’ for the LIS profession. Almost all the focus groups spoke about how they are seeing and experiencing a culture change in the profession. Librarian 2.0 requires a ‘different mindset or attitude’. The Levels of Perspective model by Daniel Kim provides one lens by which to view this finding. The focus group findings suggest that we are witnessing a re-awaking of the Australian LIS profession as it begins to move towards the higher levels of Kim’s model (ie mental models, vision). Thirty-six LIS educators participated in telephone interviews aimed at exploring the current state of LIS education in supporting the development of librarian 2.0. Skills and knowledge of LIS professionals in a web 2.0 world that were identified and discussed by the LIS educators mirrored those highlighted in the focus group discussions with LIS professionals. Similarly it was noted that librarian 2.0 needed a focus less on skills and knowledge and more on attitude. However, whilst LIS professionals felt that there was a paradigm shift within the profession. LIS educators did not speak with one voice on this matter with quite a number of the educators suggesting that this might be ‘overstating it a bit’. This study provides evidence for “disparate viewpoints” (Hallam, 2007) between LIS educators and LIS professionals that can have a significant implications for the future of not just LIS professional education specifically but for the profession generally. Library and information science education 2.0: guiding principles and models of best practice 1 Inviting the LIS academics to discuss how their teaching and learning activities support the development of librarian 2.0 was a core part of the interviews conducted. The strategies used and the challenges faced by LIS educators in developing their teaching and learning approaches to support the formation of librarian 2.0 are identified and discussed. A core part of the fellowship was the identification of best practice examples on how LIS educators were developing librarian 2.0. Twelve best practice examples were identified. Each educator was recorded discussing his or her approach to teaching and learning. Videos of these interviews are available via the Fellowship blog at .The LIS educators involved in making the videos felt uncomfortable with the term ‘best practice’. Many acknowledged that there simply seeking to do the best by their students and that there was always room for improvement. For this reason these videos are offered as examples of “great practice”. The videos are a tool for other educators to use, regardless of discipline, in developing their teaching and learning approaches to supporting web 2.0 professionals. It has been argued that the main purpose of professional education is transformation (Dall’ Alba, 2009; Dall’Alba & Barnacle, 2007). As such professional education should focus not just on skills and knowledge acquisition but also on helping students to develop ways of being the professionals in question (ie LIS professionals, teachers, lawyers, engineers).The aim of this fellowship was to establish Guidelines for Library and Information Science Education 2.0 it has however become apparent that at this point in time it is not yet possible to fulfil this aim. The fellowship has clearly identified skills and knowledge needed by the LIS professional in web 2.0 world (and beyond). It has also identified examples of ‘great practice’ by LIS educators as they endeavour to develop LIS professionals who will be successful in a web 20 world. The fellowship however has also shown that the LIS profession is currently undergoing significant attitudinal and conceptual change. Consequently, before a philosophy of LIS education 2.0 can be expressed, the Australian LIS profession must first explore and articulate what it means to be an LIS professional in the 21st century (ie a world of web 2.0 and beyond). In short, the LIS profession in Australia must take stock not of “what we know and can do” but on “who we are becoming” (Dall’Alba, 2009, p 34).

Under the carpet : the politics and trauma of patient harm

Few studies have investigated iatrogenic outcomes from the viewpoint of patient experience. To address this anomaly, the broad aim of this research is to explore the lived experience of patient harm. Patient harm is defined as major harm to the patient, either psychosocial or physical in nature, resulting from any aspect of health care. Utilising the method of Consensual Qualitative Research (CQR), in-depth interviews are conducted with twenty-four volunteer research participants who self-report having been severely harmed by an invasive medical procedure. A standardised measure of emotional distress, the Impact of Event Scale (IES), is additionally employed for purposes of triangulation. Thematic analysis of transcript data indicate numerous findings including: (i) difficulties regarding patients‘ prior understanding of risks involved with their medical procedure; (ii) the problematic response of the health system post-procedure; (iii) multiple adverse effects upon life functioning; (iv) limited recourse options for patients; and (v) the approach desired in terms of how patient harm should be systemically handled. In addition, IES results indicate a clinically significant level of distress in the sample as a whole. To discuss findings, a cross-disciplinary approach is adopted that draws upon sociology, medicine, medical anthropology, psychology, philosophy, history, ethics, law, and political theory. Furthermore, an overall explanatory framework is proposed in terms of the master themes of power and trauma. In terms of the theme of power, a postmodernist analysis explores the politics of patient harm, particularly the dynamics surrounding the politics of knowledge (e.g., notions of subjective versus objective knowledge, informed consent, and open disclosure). This analysis suggests that patient care is not the prime function of the health system, which appears more focussed upon serving the interests of those in the upper levels of its hierarchy. In terms of the master theme of trauma, current understandings of posttraumatic stress disorder (PTSD) are critiqued, and based on data from this research as well as the international literature, a new model of trauma is proposed. This model is based upon the principle of homeostasis observed in biology, whereby within every cell or organism a state of equilibrium is sought and maintained. The proposed model identifies several bio-psychosocial markers of trauma across its three main phases. These trauma markers include: (i) a profound sense of loss; (ii) a lack of perceived control; (iii) passive trauma processing responses; (iv) an identity crisis; (v) a quest to fully understand the trauma event; (vi) a need for social validation of the traumatic experience; and (vii) posttraumatic adaption with the possibility of positive change. To further explore the master themes of power and trauma, a natural group interview is carried out at a meeting of a patient support group for arachnoiditis. Observations at this meeting and members‘ stories in general support the homeostatic model of trauma, particularly the quest to find answers in the face of distressing experience, as well as the need for social recognition of that experience. In addition, the sociopolitical response to arachnoiditis highlights how public domains of knowledge are largely constructed and controlled by vested interests. Implications of the data overall are discussed in terms of a cultural revolution being needed in health care to position core values around a prime focus upon patients as human beings.

Hormones down under: Hormone therapy use after the Women's Health Initiative

Aims:  The primary objective was to describe the usage pattern of hormone therapy (HT) in a sample of urban Australian women in 2001 and to assess the characteristics of users vs. non-users. The second objective was to determine whether there had been any change in usage since the publication of the results of the combined oestrogen plus progestagen arm of the Women's Health Initiative (WHI) in 2002. Methods:  A cohort of 374 postmenopausal women aged 50–80 years participated in this substudy of the LAW (Longitudinal Assessment of Ageing in Women) project: a 5-year multidisciplinary, observational study. Participants completed an annual medical assessment including details of the use of HT and the reasons for use, as well as demographic and psychosocial data. Results:  In December 2001, 30.8% of the participants were using HT, whereas 55.4% were ever users. The management of vasomotor symptoms and mood disturbance were the primary reasons for use. Of those who had been using HT in December 2001 (24.4%) women ceased using HT in the 3 months following publication of the WHI results. The percentage of women using HT in December 2003 (13.9%) was less than half of that of December 2001. Conclusion:  The rate of HT use and the reasons for use, in 2001 in Brisbane was similar to that of other Australian regions. Usage of HT decreased since the publication of the WHI results in 2002 which may reflect changing attitudes by patients and practitioners regarding HT.

The geometric modelling of social frames and contexts

How do humans respond to their social context? This question is becoming increasingly urgent in a society where democracy requires that the citizens of a country help to decide upon its policy directions, and yet those citizens frequently have very little knowledge of the complex issues that these policies seek to address. Frequently, we find that humans make their decisions more with reference to their social setting, than to the arguments of scientists, academics, and policy makers. It is broadly anticipated that the agent based modelling (ABM) of human behaviour will make it possible to treat such social effects, but we take the position here that a more sophisticated treatment of context will be required in many such models. While notions such as historical context (where the past history of an agent might affect its later actions) and situational context (where the agent will choose a different action in a different situation) abound in ABM scenarios, we will discuss a case of a potentially changing context, where social effects can have a strong influence upon the perceptions of a group of subjects. In particular, we shall discuss a recently reported case where a biased worm in an election debate led to significant distortions in the reports given by participants as to who won the debate (Davis et al 2011). Thus, participants in a different social context drew different conclusions about the perceived winner of the same debate, with associated significant differences among the two groups as to who they would vote for in the coming election. We extend this example to the problem of modelling the likely electoral responses of agents in the context of the climate change debate, and discuss the notion of interference between related questions that might be asked of an agent in a social simulation that was intended to simulate their likely responses. A modelling technology which could account for such strong social contextual effects would benefit regulatory bodies which need to navigate between multiple interests and concerns, and we shall present one viable avenue for constructing such a technology. A geometric approach will be presented, where the internal state of an agent is represented in a vector space, and their social context is naturally modelled as a set of basis states that are chosen with reference to the problem space.

Boundary weaving : the social structure and processes of organizational boundaries

Boundaries are an important field of study because they mediate almost every aspect of organizational life. They are becoming increasingly more important as organizations change more frequently and yet, despite the endemic use of the boundary metaphor in common organizational parlance, they are poorly understood. Organizational boundaries are under-theorized and researchers in related fields often simply assume their existence, without defining them. The literature on organizational boundaries is fragmented with no unifying theoretical basis. As a result, when it is recognized that an organizational boundary is "dysfunctional". there is little recourse to models on which to base remediating action. This research sets out to develop just such a theoretical model and is guided by the general question: "What is the nature of organizational boundaries?" It is argued that organizational boundaries can be conceptualised through elements of both social structure and of social process. Elements of structure include objects, coupling, properties and identity. Social processes include objectification, identification, interaction and emergence. All of these elements are integrated by a core category, or basic social process, called boundary weaving. An organizational boundary is a complex system of objects and emergent properties that are woven together by people as they interact together, objectifying the world around them, identifying with these objects and creating couplings of varying strength and polarity as well as their own fragmented identity. Organizational boundaries are characterised by the multiplicity of interconnections, a particular domain of objects, varying levels of embodiment and patterns of interaction. The theory developed in this research emerged from an exploratory, qualitative research design employing grounded theory methodology. The field data was collected from the training headquarters of the New Zealand Army using semi-structured interviews and follow up observations. The unit of analysis is an organizational boundary. Only one research context was used because of the richness and multiplicity of organizational boundaries that were present. The model arose, grounded in the data collected, through a process of theoretical memoing and constant comparative analysis. Academic literature was used as a source of data to aid theory development and the saturation of some central categories. The final theory is classified as middle range, being substantive rather than formal, and is generalizable across medium to large organizations in low-context societies. The main limitation of the research arose from the breadth of the research with multiple lines of inquiry spanning several academic disciplines, with some relevant areas such as the role of identity and complexity being addressed at a necessarily high level. The organizational boundary theory developed by this research replaces the typology approaches, typical of previous theory on organizational boundaries and reconceptualises the nature of groups in organizations as well as the role of "boundary spanners". It also has implications for any theory that relies on the concept of boundaries, such as general systems theory. The main contribution of this research is the development of a holistic model of organizational boundaries including an explanation of the multiplicity of boundaries . no organization has a single definable boundary. A significant aspect of this contribution is the integration of aspects of complexity theory and identity theory to explain the emergence of higher-order properties of organizational boundaries and of organizational identity. The core category of "boundary weaving". is a powerful new metaphor that significantly reconceptualises the way organizational boundaries may be understood in organizations. It invokes secondary metaphors such as the weaving of an organization's "boundary fabric". and provides managers with other metaphorical perspectives, such as the management of boundary friction, boundary tension, boundary permeability and boundary stability. Opportunities for future research reside in formalising and testing the theory as well as developing analytical tools that would enable managers in organizations to apply the theory in practice.

Neuropsychological development in children with early and continuously treated phenylketonuria : association with biochemical markers

PKU is a genetically inherited inborn error of metabolism caused by a deficiency of the enzyme phenylalanine hydroxylase. The failure of this enzyme causes incomplete metabolism of protein ingested in the diet, specifically the conversion of one amino acid, phenylalanine, to tyrosine, which is a precursor to the neurotransmitter dopamine. Rising levels of phenylalanine is toxic to the developing brain, disrupting the formation of white matter tracts. The impact of tyrosine deficiency is not as well understood, but is hypothesized to lead to a low dopamine environment for the developing brain. Detection in the newborn period and continuous treatment (a low protein phe-restricted diet supplemented with phenylalanine-free protein formulas) has resulted in children with early and continuously treated PKU now developing normal I.Q. However, deficits in executive function (EF) are common, leading to a rate of Attention Deficit Hyperactivity Disorder (ADHD) up to five times the norm. EF worsens with exposure to higher phenylalanine levels, however recent research has demonstrated that a high phenylalanine to tyrosine ratio (phenylalanine:tyrosine ratio), which is hypothesised to lead to poorer dopamine function, has a more negative impact on EF than phenylalanine levels alone. Research and treatment of PKU is currently phenylalanine-focused, with little investigation of the impact of tyrosine on neuropsychological development. There is no current consensus as to the veracity of tyrosine monitoring or treatment in this population. Further, the research agenda in this population has demonstrated a primary focus on EF impairment alone, even though there may be additional neuropsychological skills compromised (e.g., mood, visuospatial deficits). The aim of this PhD research was to identify residual neuropsychological deficits in a cohort of children with early and continuously treated phenylketonuria, at two time points in development (early childhood and early adolescence), separated by eight years. In addition, this research sought to determine which biochemical markers were associated with neuropsychological impairments. A clinical practice survey was also undertaken to ascertain the current level of monitoring/treatment of tyrosine in this population. Thirteen children with early and continuously treated PKU were tested at mean age 5.9 years and again at mean age 13.95 years on several neuropsychological measures. Four children with hyperphenylalaninemia (a milder version of PKU) were also tested at both time points and provide a comparison group in analyses. Associations between neuropsychological function and biochemical markers were analysed. A between groups analysis in adolescence was also conducted (children with PKU compared to their siblings) on parent report measures of EF and mood. Minor EF impairments were evident in the PKU group by age 6 years and these persisted into adolescence. Life-long exposure to high phenylalanine:tyrosine ratio and/or low tyrosine independent of phenylalanine were significantly associated with EF impairments at both time points. Over half the children with PKU showed severe impairment on a visuospatial task, and this was associated only with concurrent levels of tyrosine in adolescence. Children with PKU also showed a statistically significant decline in a language comprehension task from 6 years to adolescence (going from normal to subnormal), this deficit was associated with lifetime levels of phenylalanine. In comparison, the four children with hyperphenylalaninemia demonstrated normal function at both time points, across all measures. No statistically significant differences were detected between children with PKU and their siblings on the parent report of EF and mood. However, depressive symptoms were significantly correlated with: EF; long term high phe:tyr exposure; and low tyrosine levels independent of phenylalanine. The practice survey of metabolic clinics from 12 countries indicated a high level of variability in terms of monitoring/treatment of tyrosine in this population. Whilst over 80% of clinics surveyed routinely monitored tyrosine levels in their child patients, 25% reported treatment strategies to increase tyrosine (and thereby lower the phenylalanine:tyrosine ratio) under a variety of patient presentation conditions. Overall, these studies have shown that EF impairments associated with PKU provide support for the dopamine-deficiency model. A language comprehension task showed a different trajectory, serving a timely reminder that non-EF functions also remain vulnerable in this population; and that normal function in childhood does not guarantee normal function by adolescence. Mood impairments were associated with EF impairments as well as long term measures of phenylalanine:tyrosine and/or tyrosine. The implications of this research for enhanced clinical guidelines are discussed given varied current practice.

Structural and thermal performance of cold-formed steel stud wall systems under fire conditions

Cold-formed steel stud walls are a major component of Light Steel Framing (LSF) building systems used in commercial, industrial and residential buildings. In the conventional LSF stud wall systems, thin steel studs are protected from fire by placing one or two layers of plasterboard on both sides with or without cavity insulation. However, there is very limited data about the structural and thermal performance of stud wall systems while past research showed contradicting results, for example, about the benefits of cavity insulation. This research was therefore conducted to improve the knowledge and understanding of the structural and thermal performance of cold-formed steel stud wall systems (both load bearing and non-load bearing) under fire conditions and to develop new improved stud wall systems including reliable and simple methods to predict their fire resistance rating. Full scale fire tests of cold-formed steel stud wall systems formed the basis of this research. This research proposed an innovative LSF stud wall system in which a composite panel made of two plasterboards with insulation between them was used to improve the fire rating. Hence fire tests included both conventional steel stud walls with and without the use of cavity insulation and the new composite panel system. A propane fired gas furnace was specially designed and constructed first. The furnace was designed to deliver heat in accordance with the standard time temperature curve as proposed by AS 1530.4 (SA, 2005). A compression loading frame capable of loading the individual studs of a full scale steel stud wall system was also designed and built for the load-bearing tests. Fire tests included comprehensive time-temperature measurements across the thickness and along the length of all the specimens using K type thermocouples. They also included the measurements of load-deformation characteristics of stud walls until failure. The first phase of fire tests included 15 small scale fire tests of gypsum plasterboards, and composite panels using different types of insulating material of varying thickness and density. Fire performance of single and multiple layers of gypsum plasterboards was assessed including the effect of interfaces between adjacent plasterboards on the thermal performance. Effects of insulations such as glass fibre, rock fibre and cellulose fibre were also determined while the tests provided important data relating to the temperature at which the fall off of external plasterboards occurred. In the second phase, nine small scale non-load bearing wall specimens were tested to investigate the thermal performance of conventional and innovative steel stud wall systems. Effects of single and multiple layers of plasterboards with and without vertical joints were investigated. The new composite panels were seen to offer greater thermal protection to the studs in comparison to the conventional panels. In the third phase of fire tests, nine full scale load bearing wall specimens were tested to study the thermal and structural performance of the load bearing wall assemblies. A full scale test was also conducted at ambient temperature. These tests showed that the use of cavity insulation led to inferior fire performance of walls, and provided good explanations and supporting research data to overcome the incorrect industry assumptions about cavity insulation. They demonstrated that the use of insulation externally in a composite panel enhanced the thermal and structural performance of stud walls and increased their fire resistance rating significantly. Hence this research recommends the use of the new composite panel system for cold-formed LSF walls. This research also included steady state tensile tests at ambient and elevated temperatures to address the lack of reliable mechanical properties for high grade cold-formed steels at elevated temperatures. Suitable predictive equations were developed for calculating the yield strength and elastic modulus at elevated temperatures. In summary, this research has developed comprehensive experimental thermal and structural performance data for both the conventional and the proposed non-load bearing and load bearing stud wall systems under fire conditions. Idealized hot flange temperature profiles have been developed for non-insulated, cavity insulated and externally insulated load bearing wall models along with suitable equations for predicting their failure times. A graphical method has also been proposed to predict the failure times (fire rating) of non-load bearing and load bearing walls under different load ratios. The results from this research are useful to both fire researchers and engineers working in this field. Most importantly, this research has significantly improved the knowledge and understanding of cold-formed LSF walls under fire conditions, and developed an innovative LSF wall system with increased fire rating. It has clearly demonstrated the detrimental effects of using cavity insulation, and has paved the way for Australian building industries to develop new wall panels with increased fire rating for commercial applications worldwide.

Properties of lignin and poly(hydroxybutyrate) blends

The Queensland University of Technology (QUT) allows the presentation of a thesis for the Degree of Doctor of Philosophy in the format of published or submitted papers, where such papers have been published, accepted or submitted during the period of candidature. This thesis is composed of Seven published/submitted papers and one poster presentation, of which five have been published and the other two are under review. This project is financially supported by the QUTPRA Grant. The twenty-first century started with the resurrection of lignocellulosic biomass as a potential substitute for petrochemicals. Petrochemicals, which enjoyed the sustainable economic growth during the past century, have begun to reach or have reached their peak. The world energy situation is complicated by political uncertainty and by the environmental impact associated with petrochemical import and usage. In particular, greenhouse gasses and toxic emissions produced by petrochemicals have been implicated as a significant cause of climate changes. Lignocellulosic biomass (e.g. sugarcane biomass and bagasse), which potentially enjoys a more abundant, widely distributed, and cost-effective resource base, can play an indispensible role in the paradigm transition from fossil-based to carbohydrate-based economy. Poly(3-hydroxybutyrate), PHB has attracted much commercial interest as a plastic and biodegradable material because some its physical properties are similar to those of polypropylene (PP), even though the two polymers have quite different chemical structures. PHB exhibits a high degree of crystallinity, has a high melting point of approximately 180°C, and most importantly, unlike PP, PHB is rapidly biodegradable. Two major factors which currently inhibit the widespread use of PHB are its high cost and poor mechanical properties. The production costs of PHB are significantly higher than for plastics produced from petrochemical resources (e.g. PP costs $US1 kg-1, whereas PHB costs $US8 kg-1), and its stiff and brittle nature makes processing difficult and impedes its ability to handle high impact. Lignin, together with cellulose and hemicellulose, are the three main components of every lignocellulosic biomass. It is a natural polymer occurring in the plant cell wall. Lignin, after cellulose, is the most abundant polymer in nature. It is extracted mainly as a by-product in the pulp and paper industry. Although, traditionally lignin is burnt in industry for energy, it has a lot of value-add properties. Lignin, which to date has not been exploited, is an amorphous polymer with hydrophobic behaviour. These make it a good candidate for blending with PHB and technically, blending can be a viable solution for price and reduction and enhance production properties. Theoretically, lignin and PHB affect the physiochemical properties of each other when they become miscible in a composite. A comprehensive study on structural, thermal, rheological and environmental properties of lignin/PHB blends together with neat lignin and PHB is the targeted scope of this thesis. An introduction to this research, including a description of the research problem, a literature review and an account of the research progress linking the research papers is presented in Chapter 1. In this research, lignin was obtained from bagasse through extraction with sodium hydroxide. A novel two-step pH precipitation procedure was used to recover soda lignin with the purity of 96.3 wt% from the black liquor (i.e. the spent sodium hydroxide solution). The precipitation process is presented in Chapter 2. A sequential solvent extraction process was used to fractionate the soda lignin into three fractions. These fractions, together with the soda lignin, were characterised to determine elemental composition, purity, carbohydrate content, molecular weight, and functional group content. The thermal properties of the lignins were also determined. The results are presented and discussed in Chapter 2. On the basis of the type and quantity of functional groups, attempts were made to identify potential applications for each of the individual lignins. As an addendum to the general section on the development of composite materials of lignin, which includes Chapters 1 and 2, studies on the kinetics of bagasse thermal degradation are presented in Appendix 1. The work showed that distinct stages of mass losses depend on residual sucrose. As the development of value-added products from lignin will improve the economics of cellulosic ethanol, a review on lignin applications, which included lignin/PHB composites, is presented in Appendix 2. Chapters 3, 4 and 5 are dedicated to investigations of the properties of soda lignin/PHB composites. Chapter 3 reports on the thermal stability and miscibility of the blends. Although the addition of soda lignin shifts the onset of PHB decomposition to lower temperatures, the lignin/PHB blends are thermally more stable over a wider temperature range. The results from the thermal study also indicated that blends containing up to 40 wt% soda lignin were miscible. The Tg data for these blends fitted nicely to the Gordon-Taylor and Kwei models. Fourier transform infrared spectroscopy (FT-IR) evaluation showed that the miscibility of the blends was because of specific hydrogen bonding (and similar interactions) between reactive phenolic hydroxyl groups of lignin and the carbonyl group of PHB. The thermophysical and rheological properties of soda lignin/PHB blends are presented in Chapter 4. In this chapter, the kinetics of thermal degradation of the blends is studied using thermogravimetric analysis (TGA). This preliminary investigation is limited to the processing temperature of blend manufacturing. Of significance in the study, is the drop in the apparent energy of activation, Ea from 112 kJmol-1 for pure PHB to half that value for blends. This means that the addition of lignin to PHB reduces the thermal stability of PHB, and that the comparative reduced weight loss observed in the TGA data is associated with the slower rate of lignin degradation in the composite. The Tg of PHB, as well as its melting temperature, melting enthalpy, crystallinity and melting point decrease with increase in lignin content. Results from the rheological investigation showed that at low lignin content (.30 wt%), lignin acts as a plasticiser for PHB, while at high lignin content it acts as a filler. Chapter 5 is dedicated to the environmental study of soda lignin/PHB blends. The biodegradability of lignin/PHB blends is compared to that of PHB using the standard soil burial test. To obtain acceptable biodegradation data, samples were buried for 12 months under controlled conditions. Gravimetric analysis, TGA, optical microscopy, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), FT-IR, and X-ray photoelectron spectroscopy (XPS) were used in the study. The results clearly demonstrated that lignin retards the biodegradation of PHB, and that the miscible blends were more resistant to degradation compared to the immiscible blends. To obtain an understanding between the structure of lignin and the properties of the blends, a methanol-soluble lignin, which contains 3× less phenolic hydroxyl group that its parent soda lignin used in preparing blends for the work reported in Chapters 3 and 4, was blended with PHB and the properties of the blends investigated. The results are reported in Chapter 6. At up to 40 wt% methanolsoluble lignin, the experimental data fitted the Gordon-Taylor and Kwei models, similar to the results obtained soda lignin-based blends. However, the values obtained for the interactive parameters for the methanol-soluble lignin blends were slightly lower than the blends obtained with soda lignin indicating weaker association between methanol-soluble lignin and PHB. FT-IR data confirmed that hydrogen bonding is the main interactive force between the reactive functional groups of lignin and the carbonyl group of PHB. In summary, the structural differences existing between the two lignins did not manifest itself in the properties of their blends.

Human rights and environmental wrongs : achieving environmental justice through human rights law

The links between the environment and human rights are well established internationally. It is accepted that environmental problems impact on individuals’ and communities’ enjoyment of rights which are guaranteed to them under international human rights law. Environmental issues also impact on governments’ capacity to protect and fulfil the rights of their citizens. In addition to these links between the environment and human rights, it is argued that human rights principles offer a strategy for addressing environmental injustice. The justice implications of environmental problems are well documented, with many examples where pollution, deforestation or other degradation disproportionately impacts upon poorer neighbourhoods or areas populated by minority groups. On the international level, there are environmental injustices which exist between developed and developing states. Further, there are also potential injustices for future generations. This paper investigates the role of human rights principles in addressing these instances of environmental injustice, and argues that the framework of human rights norms provides an approach to environmental governance which can help to minimise injustice and promote the interests of those groups who are most adversely affected. Further, it suggests that the human rights enforcement mechanisms which exist at international law could be utilised to lend more weight to claims for more equitable environmental policies.

Actions for declaratory or injunctive relief by the Corporate Regulator under s 471B of the Corporations Act

This article by Ben McEniery discusses the matters a court will consider when leave to commence or proceed against a company in liquidation is sought not by a creditor seeking to prove a debt, but by the corporate regulator pursuing declaratory or injunctive relief.

Enduring documents : improving the forms, improving the outcomes

Most Australian states have introduced legislation to provide for enduring documents for financial, personal and health care decision making in the event of incapacity. Since the introduction of Enduring Powers of Attorney (EPAs) and Advance Health Directives (AHDs) in Queensland in 1998, concerns have continued to be raised by service providers, professionals and individuals about the uptake, understanding and appropriate use of these documents. In response to these concerns, the Department of Justice and Attorney-General (DJAG) convened a Practical Guardianship Initiatives Working Party. This group identified the limited evidence base available to address these concerns. In 2009, a multidisciplinary research team from the University of Queensland and the Queensland University of Technology was awarded $90,000 from the Legal Practitioners Interest on Trust Account Fund to undertake a review of the current EPA and AHD forms. The goal of the research was to gather data on the content and useability of the forms from the perspectives of a range of stakeholders, particularly those completing the EPA and AHD, witnesses of these documents, attorneys appointed under an EPA, and health professionals involved in the completion of an AHD or dealing with it in a clinical context. The researchers also sought to gather information from the perspective of Aboriginal and Torres Strait Islander (ATSI) individuals as well people from culturally and linguistically diverse (CALD) groups. Although the focus of the research was on the forms and the extent to which the current design, content and format represents a barrier to uptake, in the course of the research, some broader issues were identified which have an impact on the effectiveness of the EPA and AHD in achieving the goals of planning for financial and personal and health care in advance of losing capacity. The data gathered enabled the researchers to achieve the primary goal of the research: to make recommendations to improve the content and useability of the forms which hopefully will lead to an increased uptake and appropriate use of the forms. However, the researchers thought it was important not to ignore broader policy issues that were identified in the course of the research. These broader issues have been highlighted in this Report, and the researchers have responded to them in a variety of ways. For some issues, the researchers have suggested alterations that could be made to the forms to address the particular concerns. For other issues, the researchers have suggested that Government may need to take specific action such as educating the broader community with some attention to strategies that engage particular groups within communities. Other concerns raised can only be dealt with by legislative reform and, in some of these cases, the researchers have identified issues that Government may wish to consider further. We do note, however, that it is beyond the scope of this Report to recommend changes to the law. This three stage mixed methods project aimed to provide systematic evidence from a broad range of stakeholders in regard to: (i) which groups use and do not use these documents and why, (ii) the contribution of the length/complexity/format/language of the forms as barriers to their completion and/or effective use, and (iii) the issues raised by the current documents for witnesses and attorneys. Understanding and use of EPAs and AHDs were generally explored in separate but parallel processes. A purposive sampling strategy included users of the documents as principals and attorneys, and professionals, witnesses and service providers who assist others to execute or use the forms. The first component of this study built on existing knowledge using a Critical Reference Group and material provided by the DJAG Practical Guardianship Initiatives Working Party. This assisted in the development of the data collection tools for subsequent stages. The second component comprised semi-structured interviews and focus groups with a targeted sample of current users of the forms, potential users, witnesses and other professionals to provide in-depth information on critical issues. Outreach to Aboriginal and Torres Strait Islander Elders and individuals and workers with CALD groups ensured a broad sample of potential users of the two documents. Fifty individual interviews and three focus groups were completed. Most interviews and focus groups focused on perceptions of, and experiences with, either the EPA or the AHD form. In the interviews with Indigenous people and the CALD focus groups, however, respondents provided their perceptions and experiences of both documents. In general, these respondents had not used the forms and were responding to the documents made available in the interview or focus group. In total, seventy-seven individuals were involved in interviews or focus groups. The final component comprised on-line surveys for EPA principals, EPA attorneys, AHD principals, witnesses of EPAs and AHDs and medical practitioners with experience of AHDs as nominated and/or treating doctors. The surveys were developed from the initial component and the qualitative analysis of the interview and focus group data. A total of 116 surveys were returned from major cities and regional Queensland. The survey data was analysed descriptively for patterns and trends. It is important to note that the aim of the survey was to gain insight into issues and concerns relating to the documents and not to make generalisations to the broader population.

Re-conceptualising and re-positioning Australian library and information science education for the 21st century [Final Report 2011]

How can Australian library and information science (LIS) education produce, in a sustainable manner, the diverse supply of graduates with the appropriate attributes to develop and maintain high quality professional practice in the rapidly changing 21st century? This report presents the key findings of a project that has examined this question through research into future directions for LIS education in Australia. Titled Re-conceptualising and re-positioning Australian library and information science education for the twenty-first century, the purpose of the project was to establish a consolidated and holistic picture of the Australian LIS profession, and identify how its future education and training can be mediated in a cohesive and sustainable manner. The project was undertaken with a team of 12 university and vocational LIS educators from 11 institutions around Australia between November 2009 and December 2010. Collectively, these eleven institutions represented the broad spectrum and diversity of LIS education in Australia, and enabled the project to examine education for the information profession in a holistic and synergistic manner. Participating institutions in the project included Queensland University of Technology (Project Leader), Charles Sturt University, Curtin University of Technology, Edith Cowan University, Monash University, RMIT University, University of Canberra, University of South Australia, University of Tasmania, University of Technology Sydney and Victoria University. The inception and need for the project was motivated by a range of factors. From a broad perspective several of these factors relate to concerns raised at national and international levels regarding problems with education for LIS. In addition, the motivation and need for the project also related to some unique challenges that LIS education faces in the Australian tertiary education landscape. Over recent years a range of responses to explore the various issues confronting LIS education in Australia have emerged at local and national levels however this project represented the first significant investment of funding for national research in this area. In this way, the inception of the project offered a unique opportunity and powerful mechanism through which to bring together key stakeholders and inspire discourse concerning future education for the profession. Therefore as the first national project of its kind, its intent has been to provide foundation research that will inform and guide future directions for LIS education and training in Australia. The primary objective of the project was to develop a Framework for the Education of the Information Professions in Australia. The purpose of this framework was to provide evidence based strategic recommendations that would guide Australia’s future education for the information professions. Recognising the three major and equal players in the education process the project was framed around three areas of consideration: LIS students, the LIS workforce and LIS educators. Each area of consideration aligned to a research substudy in the project. The three research substudies were titled Student Considerations, Workforce Planning Considerations and Tertiary Education Considerations. The Students substudy provided a profile of LIS students and an analysis of their choices, experiences and expectations in regard to LIS education and their graduate destinations. The Workforce substudy provided an overview and analysis of the nature of the current LIS workforce, including a focus on employer expectations and employment opportunities and comment on the core and elective skill, knowledge and attitudes of current and future LIS professionals. Finally the Tertiary Education substudy provided a profile of LIS educators and an analysis of their characteristics and experiences including the key issues and challenges. In addition it also explored current national and international trends and priorities impacting on LIS education. The project utilised a Community Based Participatory Research (CBPR) approach. This approach involves all members of the community in all aspects of the project. It recognised the unique strengths and perspectives that community members bring to the process. For this project ‘community’ comprised of all individuals who have a role in, or a vested interest in, LIS education and included LIS educators, professionals, employers, students and professional associations. Individuals from these sub-groups were invited to participate in a range of aspects of the project from design through to implementation and evaluation. A range of research methodologies were used to consider the many different perspectives of LIS education, including employers and recruiters, professional associations, students, graduates and LIS teaching staff. Data collection involved a mixed method approach of questionnaires, focus groups, semi-structured interviews and environmental scans. An array of approaches was selected to ensure that broadest possible access to different facets of the information profession would be achieved. The main findings and observations from each substudy have highlighted a range of challenges for LIS education that need to be addressed. These findings and observations have grounded the development of the Framework for the Education of the Information Professions in Australia. The framework presents eleven recommendations to progress the national approach to LIS education and guide Australia’s future education for the information professions. The framework will be used by the LIS profession, most notably its educators, as strategic directions for the future of LIS education in Australia. Framework for the Education of the Information Professions in Australia: Recommendation 1: It is recommended that a broader and more inclusive vocabulary be adopted that both recognises and celebrates the expanding landscape of the field, for example ‘information profession’, ‘information sector’, ‘information discipline’ and ‘information education’. Recommendation 2: It is recommended that a self-directed body composed of information educators be established to promote, support and lead excellence in teaching and research within the information discipline. Recommendation 3: It is recommended that Australia’s information discipline continue to develop excellence in information research that will raise the discipline’s profile and contribute to its prominence within the national and international arena. Recommendation 4: It is recommended that further research examining the nature and context of Australia’s information education programs be undertaken to ensure a sustainable and relevant future for the discipline. Recommendation 5: It is recommended that further research examining the pathways and qualifications available for entry into the Australian information sector be undertaken to ensure relevance, attractiveness, accessibility and transparency. Recommendation 6: It is recommended that strategies are developed and implemented to ensure the sustainability of the workforce of information educators. Recommendation 7: It is recommended that a national approach to promoting and marketing the information profession and thereby attracting more students to the field is developed. Recommendation 8: It is recommended that Australia’s information discipline continues to support a culture of quality teaching and learning, especially given the need to accommodate a focus on the broader information landscape and more flexible delivery options. Recommendation 9: It is recommended that strategies are developed that will support and encourage collaboration between information education within the higher education and VET sectors. Recommendation 10: It is recommended that strategies and forums are developed that will support the information sector working together to conceptualise and articulate their professional identity and educational needs. Recommendation 11: It is recommended that a research agenda be established that will identify and prioritise areas in which further development or work is needed to continue advancing information education in Australia. The key findings from this project confirm that a number of pressing issues are confronting LIS education in Australia. Left unaddressed these issues will have significant implications for the future of LIS education as well as the broader LIS profession. Consequently creating a sustainable and cohesive future can only be realised through cooperation and collaboration among all stakeholders including those with the capacity to enact radical change in university and vocational institutions. Indeed the impending adoption and implementation of the project’s recommendations will fundamentally determine whether Australian LIS education is assured both for the present day and into the future.

Physical characteristics of small ions and their interaction with ultrafine particles in the urban environment

In recent years, the effect of ions and ultrafine particles on ambient air quality and human health has been well documented, however, knowledge about their sources, concentrations and interactions within different types of urban environments remains limited. This thesis presents the results of numerous field studies aimed at quantifying variations in ion concentration with distance from the source, as well as identifying the dynamics of the particle ionisation processes which lead to the formation of charged particles in the air. In order to select the most appropriate measurement instruments and locations for the studies, a literature review was also conducted on studies that reported ion and ultrafine particle emissions from different sources in a typical urban environment. The initial study involved laboratory experiments on the attachment of ions to aerosols, so as to gain a better understanding of the interaction between ions and particles. This study determined the efficiency of corona ions at charging and removing particles from the air, as a function of different particle number and ion concentrations. The results showed that particle number loss was directly proportional to particle charge concentration, and that higher small ion concentrations led to higher particle deposition rates in all size ranges investigated. Nanoparticles were also observed to decrease with increasing particle charge concentration, due to their higher Brownian mobility and subsequent attachment to charged particles. Given that corona discharge from high voltage powerlines is considered one of the major ion sources in urban areas, a detailed study was then conducted under three parallel overhead powerlines, with a steady wind blowing in a perpendicular direction to the lines. The results showed that large sections of the lines did not produce any corona at all, while strong positive emissions were observed from discrete components such as a particular set of spacers on one of the lines. Measurements were also conducted at eight upwind and downwind points perpendicular to the powerlines, spanning a total distance of about 160m. The maximum positive small and large ion concentrations, and DC electric field were observed at a point 20 m downwind from the lines, with median values of 4.4×103 cm-3, 1.3×103 cm-3 and 530 V m-1, respectively. It was estimated that, at this point, less than 7% of the total number of particles was charged. The electrical parameters decreased steadily with increasing downwind distance from the lines but remained significantly higher than background levels at the limit of the measurements. Moreover, vehicles are one of the most prevalent ion and particle emitting sources in urban environments, and therefore, experiments were also conducted behind a motor vehicle exhaust pipe and near busy motorways, with the aim of quantifying small ion and particle charge concentration, as well as their distribution as a function of distance from the source. The study found that approximately equal numbers of positive and negative ions were observed in the vehicle exhaust plume, as well as near motorways, of which heavy duty vehicles were believed to be the main contributor. In addition, cluster ion concentration was observed to decrease rapidly within the first 10-15 m from the road and ion-ion recombination and ion-aerosol attachment were the most likely cause of ion depletion, rather than dilution and turbulence related processes. In addition to the above-mentioned dominant ion sources, other sources also exist within urban environments where intensive human activities take place. In this part of the study, airborne concentrations of small ions, particles and net particle charge were measured at 32 different outdoor sites in and around Brisbane, Australia, which were classified into seven different groups as follows: park, woodland, city centre, residential, freeway, powerlines and power substation. Whilst the study confirmed that powerlines, power substations and freeways were the main ion sources in an urban environment, it also suggested that not all powerlines emitted ions, only those with discrete corona discharge points. In addition to the main ion sources, higher ion concentrations were also observed environments affected by vehicle traffic and human activities, such as the city centre and residential areas. A considerable number of ions were also observed in a woodland area and it is still unclear if they were emitted directly from the trees, or if they originated from some other local source. Overall, it was found that different types of environments had different types of ion sources, which could be classified as unipolar or bipolar particle sources, as well as ion sources that co-exist with particle sources. In general, fewer small ions were observed at sites with co-existing sources, however particle charge was often higher due to the effect of ion-particle attachment. In summary, this study quantified ion concentrations in typical urban environments, identified major charge sources in urban areas, and determined the spatial dispersion of ions as a function of distance from the source, as well as their controlling factors. The study also presented ion-aerosol attachment efficiencies under high ion concentration conditions, both in the laboratory and in real outdoor environments. The outcomes of these studies addressed the aims of this work and advanced understanding of the charge status of aerosols in the urban environment.