What can spike train distances tell us about the neural code?

Time scale parametric spike train distances like the Victor and the van Rossum distancesare often applied to study the neural code based on neural stimuli discrimination.Different neural coding hypotheses, such as rate or coincidence coding,can be assessed by combining a time scale parametric spike train distance with aclassifier in order to obtain the optimal discrimination performance. The time scalefor which the responses to different stimuli are distinguished best is assumed to bethe discriminative precision of the neural code. The relevance of temporal codingis evaluated by comparing the optimal discrimination performance with the oneachieved when assuming a rate code.We here characterize the measures quantifying the discrimination performance,the discriminative precision, and the relevance of temporal coding. Furthermore,we evaluate the information these quantities provide about the neural code. Weshow that the discriminative precision is too unspecific to be interpreted in termsof the time scales relevant for encoding. Accordingly, the time scale parametricnature of the distances is mainly an advantage because it allows maximizing thediscrimination performance across a whole set of measures with different sensitivitiesdetermined by the time scale parameter, but not due to the possibility toexamine the temporal properties of the neural code.

Distortion control for delay-sensitive sources

We investigate the problem of finding minimum-distortion policies for streaming delay-sensitive but distortion-tolerant data. We consider cross-layer approaches which exploit the coupling between presentation and transport layers. We make the natural assumption that the distortion function is convex and decreasing. We focus on a single source-destination pair and analytically find the optimum transmission policy when the transmission is done over an error-free channel. This optimum policy turns out to be independent of the exact form of the convex and decreasing distortion function. Then, for a packet-erasure channel, we analytically find the optimum open-loop transmission policy, which is also independent of the form of the convex distortion function. We then find computationally efficient closed-loop heuristic policies and show, through numerical evaluation, that they outperform the open-loop policy and have near optimal performance.

Predictors of political orientation among US-born Mexican Americans: cultural identification, acculturation attitudes and socioeconomic status

With each passing election, U.S. political campaigns have renewed their efforts in courting the “Latino vote,” yet the Latino population is not a culturally homogenous voting bloc. This study examined how cultural identifications and acculturation attitudes in U.S. born Mexican Americans interacted with socioeconomic status (SES) to predict political orientation. Individuals who held stronger Mexican identity and supported biculturalism as an acculturation strategy had a more liberal orientation, while belonging to a higher SES group and holding stronger assimilation attitudes predicted a less liberal orientation. Mexican cultural identification interacted with SES such that those who held a weaker Mexican identity, but came from a higher social class were less liberal and more moderate in their political orientation. Weak Mexican identification and higher SES also predicted weaker endorsement of bicultural acculturation attitudes, which in turn, mediated the differences in political orientation. The acceptance of one’s ethnic identity and endorsement of bicultural attitudes predicted a more liberal political orientation. In light of these findings, political candidates should be cautious in how they pander to Latino constituents—referencing the groups’ ethnic culture or customs may distance constituents who are not strongly identified with their ethnic culture.

Androgen dependence of hirsutism, acne, and alopecia in women: retrospective analysis of 228 patients investigated for hyperandrogenism.

Hirsutism, acne, alopecia, and oligo-amenorrhea are clinical expressions of hyperandrogenism, one of the most frequent endocrine disorders in women of reproductive age. Women referred to our endocrine clinics for skin symptoms of hyperandrogenism underwent a laboratory workup to evaluate hormone measurements and received antiandrogen therapy. We retrospectively analyzed the outcome of 228 consecutive patients investigated over 6 years.Patients with hirsutism had higher levels of androstenedione, dehydroepiandrosterone sulfate (DHEAS), and salivary testosterone; lower levels of sex hormone-binding globulin (SHBG); and a higher prevalence of oligo-amenorrhea than patients with alopecia, while patients with acne showed intermediate values. Hirsutism score correlated positively with androstenedione, DHEAS, and salivary testosterone, and correlated negatively with SHBG; salivary testosterone showed the highest correlation coefficient. Total testosterone was not significantly different among patients with hirsutism, alopecia, or acne, and did not significantly correlate with hirsutism score. Hirsutism and oligo-amenorrhea were the most sensitive symptoms of hyperandrogenism, and no androgenic parameter alone allowed us to identify all cases of hyperandrogenism.Patients of central European origin sought consultation with milder hirsutism scores than patients of southern European origin. There was, however, no difference in the clinical-biological correlation between these groups, arguing against differences in skin sensitivity to androgens.Polycystic ovary syndrome, defined as hyperandrogenism (hirsutism or elevated androgens) and oligo-amenorrhea, was diagnosed in 63 patients (27.6%), an underestimate compared with other reports that include systematic ovarian ultrasound studies. Neither pelvic ultrasound, used in a limited number of cases, nor the luteinizing hormone/follicle-stimulating hormone ratio helped to distinguish patients with polycystic ovary syndrome from the other diagnostic groups. These included hyperandrogenism (hirsutism or elevated androgens) and eumenorrhea (101 patients; 44.3%); normal androgens (acne or alopecia and eumenorrhea) (51 patients; 22.4%); isolated low SHBG (7 patients; 3.1%); nonclassical congenital adrenal hyperplasia (4 patients; 1.8% of total, 4.9% of patients undergoing cosyntropin stimulation tests); and ovarian tumor (2 patients; 0.9%).Ethinylestradiol and high-dose cyproterone acetate treatment lowered the hirsutism score to 53.5% of baseline at 1 year, and was also effective in treating acne and alopecia. The clinical benefit is ascribed to the peripheral antiandrogenic effect of cyproterone acetate as well as the hormone-suppressive effect of this combination. Salivary testosterone showed the most marked proportional decrease of all the androgens under treatment. Cost-effectiveness and tolerance of ethinylestradiol and high-dose cyproterone acetate compared well with other antiandrogenic drug therapies for hirsutism. The less potent therapy with spironolactone only, a peripheral antiandrogen without hormone-suppressive effect, was effective in treating isolated alopecia in patients with normal androgens.

La Macedonia / descritta da Giacomo Cantelli da Vignola suddito, è Geografo del Serenis[si]mo Sig[no]r Duca di Modena ; Fran[cesc]us Donia Mess[anens]is sculp[si]t

Échelle(s) : [1:895 000 environ], Miglia Italiane 30 [= 6,1 cm]

Macedonia Epiro Livadia Albania e Ianna / divise nelle sue parti principali da Giacomo Cantelli da Vignola, su l'Esemplare delle Carte migliori, é sù le più recenti Relazioni, ... ; Fran[cesc]us Donia Messanensis sculp[si]t

Échelle(s) : [1:1 460 500 environ], Scala di Miglia Italiane 60 [= 7,6 cm]

MRSA screening by the Xpert MRSA PCR assay: pooling samples of the nose, throat, and groin increases the sensitivity of detection without increasing the laboratory costs.

The performance of the Xpert MRSA polymerase chain reaction (PCR) assay on pooled nose, groin, and throat swabs (three nylon flocked eSwabs into one tube) was compared to culture by analyzing 5,546 samples. The sensitivity [0.78, 95 % confidence interval (CI) 0.73-0.82] and specificity (0.99, 95 % CI 0.98-0.99) were similar to the results from published studies on separated nose or other specimens. Thus, the performance of the Xpert MRSA assay was not affected by pooling the three specimens into one assay, allowing a higher detection rate without increasing laboratory costs, as compared to nose samples alone.

Structural changes in the US economy: Bad Luck or Bad Policy?

This paper investigates the relationship between time variations in output and inflation dynamics and monetary policy in the US. There are changes in the structural coefficients and in the variance of the structural shocks. The policy rules in the 1970s and 1990s are similar as is the transmission of policy disturbances. Inflation persistence is only partly a monetary phenomena. Variations in the systematic component of policy have limited effects on the dynamics of output and inflation. Results are robust to alterations in the auxiliary assumptions.

Monitoring of the Launched Girder Bridge over the Iowa River on US 20, March 2004

The objective of the study presented in this report was to document the launch of the Iowa River Bridge and to monitor and evaluate the structural performance of the bridge superstructure and substructure during the launch. The Iowa Department of Transportation used an incremental launching method, which is relatively unique for steel I-girder bridges, to construct the Iowa River Bridge over an environmentally sensitive river valley in central Iowa. The bridge was designed as two separate roadways consisting of four steel plate girders each that are approximately 11 ft deep and span approximately 301 ft each over five spans. The concrete bridge deck was not placed until after both roadways had been launched. One of the most significant monitoring and evaluation observations related to the superstructure was that the bottom flange (and associated web region) was subjected to extremely large stresses during the crossing of launch rollers. Regarding the substructure performance, the column stresses did not exceed reasonable design limits during the daylong launches. The scope of the study did not allow adequate quantification of the measured applied launch forces at the piers. Future proposed esearch should provide an opportunity to address this. The overall experimental performance of the bridge during the launch was compared with the predicted design performance. In general, the substructure design, girder contact stress, and total launching force assumptions correlated well with the experimental results. The design assumptions for total axial force in crossframe members, on the other hand, differed from the experimental results by as much as 300%.

Policy and the Evolution of the US Economy: 1948-2002

This paper investigates the relationship between monetary policy and the changes experienced by the US economy using a small scale New-Keynesian model. The model is estimated with Bayesian techniques and the stability of policy parameter estimates and of the transmission of policy shocks examined. The model fits well the data and produces forecasts comparable or superior to those of alternative specifications. The parameters of the policy rule, the variance and the transmission of policy shocks have been remarkably stable. The parameters of the Phillips curve and of the Euler equations are varying.

The hematology laboratory in blood doping (bd): 2014 update on the athlete biological passport (APB)

Introduction: Blood doping (BD) is the use of Erythropoietic Stimulating Agents (ESAs) and/or transfusion to increase aerobic performance in athletes. Direct toxicologic techniques are insufficient to unmask sophisticated doping protocols. The Hematological module of the ABP (World Anti-Doping Agency), associates decision support technology and expert assessment to indirectly detect BD hematological effects. Methods: The ABP module is based on blood parameters, under strict pre-analytical and analytical rules for collection, storage and transport at 2-12°C, internal and external QC. Accuracy, reproducibility and interlaboratory harmonization fulfill forensic standard. Blood samples are collected in competition and out-ofcompetition. Primary parameters for longitudinal monitoring are: - hemoglobin (HGB); - reticulocyte percentage (RET); - OFF score, indicator of suppressed erythropoiesis, calculated as [HGB(g/L) * 60-√RET%]. Statistical calculation predicts individual expected limits by probabilistic inference. Secondary parameters are RBC, HCT, MCHC-MCH-MCV-RDW-IFR. ABP profiles flagged as atypical are review by experts in hematology, pharmacology, sports medicine or physiology, and classified as: - normal - suspect (to target) - likely due to BD - likely due to pathology. Results: Thousands of athletes worldwide are currently monitored. Since 2010, at least 35 athletes have been sanctioned and others are prosecuted on the sole basis of abnormal ABP, with a 240% increase of positivity to direct tests for ESA, thanks to improved targeting of suspicious athletes (WADA data). Specific doping scenarios have been identified by the Experts (Table and Figure). Figure. Typical HGB and RET profiles in two highly suspicious athletes. A. Sample 2: simultaneous increases in HGB and RET (likely ESA stimulation) in a male. B. Samples 3, 6 and 7: "OFF" picture, with high HGB and low RET in a female. Sample 10: normal HGB and increased RET (ESA or blood withdrawal). Conclusions: ABP is a powerful tool for indirect doping detection, based on the recognition of specific, unphysiological changes triggered by blood doping. The effect of factors of heterogeneity, such as sex and altitude, must also be considered. Schumacher YO, et al. Drug Test Anal 2012, 4:846-853. Sottas PE, et al. Clin Chem 2011, 57:969-976.

Laboratory-based versus non-laboratory-based CVD risk analysis.

Commentaire de: Gaziano TA, Young CR, Fitzmaurice G, Atwood S, Gaziano JM. Laboratory-based versus non-laboratory-based method for assessment of cardiovascular disease risk: the NHANES I Follow-up Study cohort. Lancet. 2008;371(9616):923-31. PMID: 18342687

Laboratory Study of Structural Behavior of Alternative Dowel Bars, April 2006

Load transfer across transverse joints has always been a factor contributing to the useful life of concrete pavements. For many years, round steel dowels have been the conventional load transfer mechanism. Many problems have been associated with the round steel dowels. The most detrimental effect of the steel dowel is corrosion. Repeated loading over time also damages joints. When a dowel is repeatedly loaded over a long period of time, the high bearing stresses found at the top and bottom edge of a bar erode the surrounding concrete. This oblonging creates multiple problems in the joint. Over the past decade, Iowa State University has performed extensive research on new dowel shapes and materials to mitigate the effects of oblonging and corrosion. This report evaluates the bearing stress performance of six different dowel bar types subjected to two different shear load laboratory test methods. The first load test is the AASHTO T253 method. The second procedure is an experimental cantilevered dowel test. The major objective was to investigate and improve the current AASHTO T253 test method for determining the modulus of dowel support, k0. The modified AASHTO test procedure was examined alongside an experimental cantilever dowel test. The modified AASHTO specimens were also subjected to a small-scale fatigue test in order to simulate long-term dowel behavior with respect to concrete joint damage. Loss on ignition tests were also performed on the GFRP dowel specimens to determine the resin content percentage. The study concluded that all of the tested dowel bar shapes and materials were adequate with respect to performance under shear loading. The modified AASHTO method yielded more desirable results than the ones obtained from the cantilever test. The investigators determined that the experimental cantilever test was not a satisfactory test method to replace or verify the AASHTO T253 method.

Developing a Simple and Rapid Test for Monitoring the Heat Evolution of Concrete Mixtures for Both Laboratory and Field Applications, January 2006

Various test methods exist for measuring heat of cement hydration; however, most current methods require expensive equipment, complex testing procedures, and/or extensive time, thus not being suitable for field application. The objectives of this research are to identify, develop, and evaluate a standard test procedure for characterization and quality control of pavement concrete mixtures using a calorimetry technique. This research project has three phases. Phase I was designed to identify the user needs, including performance requirements and precision and bias limits, and to synthesize existing test methods for monitoring the heat of hydration, including device types, configurations, test procedures, measurements, advantages, disadvantages, applications, and accuracy. Phase II was designed to conduct experimental work to evaluate the calorimetry equipment recommended from the Phase I study and to develop a standard test procedure for using the equipment and interpreting the test results. Phase II also includes the development of models and computer programs for prediction of concrete pavement performance based on the characteristics of heat evolution curves. Phase III was designed to study for further development of a much simpler, inexpensive calorimeter for field concrete. In this report, the results from the Phase I study are presented, the plan for the Phase II study is described, and the recommendations for Phase III study are outlined. Phase I has been completed through three major activities: (1) collecting input and advice from the members of the project Technical Working Group (TWG), (2) conducting a literature survey, and (3) performing trials at the CP Tech Center’s research lab. The research results indicate that in addition to predicting maturity/strength, concrete heat evolution test results can also be used for (1) forecasting concrete setting time, (2) specifying curing period, (3) estimating risk of thermal cracking, (4) assessing pavement sawing/finishing time, (5) characterizing cement features, (6) identifying incompatibility of cementitious materials, (7) verifying concrete mix proportions, and (8) selecting materials and/or mix designs for given environmental conditions. Besides concrete materials and mix proportions, the configuration of the calorimeter device, sample size, mixing procedure, and testing environment (temperature) also have significant influences on features of concrete heat evolution process. The research team has found that although various calorimeter tests have been conducted for assorted purposes and the potential uses of calorimeter tests are clear, there is no consensus on how to utilize the heat evolution curves to characterize concrete materials and how to effectively relate the characteristics of heat evolution curves to concrete pavement performance. The goal of the Phase II study is to close these gaps.