Using the evolution of consumer products to inform design

The development of a new consumer product and its release to market is typically an expensive and risky process. It is estimated that up to 80% of all new products fail in the marketplace (Savoia, 2014). The consequences of failure can be ruinous for a manufacturer both financially and in terms of brand reputation. So even small improvements in success prediction have the potential to save money, effort and brand reputation. This paper proposes an approach where the history and evolution of a product is mapped and analyzed. The results of the analysis can then be used to inform design decisions. This paper will also demonstrate the similarities between biological evolution and the evolution of consumer products. Using the existing structure and terminology of biological evolution allows us to focus on the aspects of innovations that have led to success and those that have led to failure. This paper uses the case study of the wristwatch and its development over 100 years. The analysis of this leads to recommendations for contemporary “smartwatches.”

Standardised antibacterial Manuka honey in the management of persistent post-operative corneal oedema: A case series

Background Corneal oedema is a common post-operative problem that delays or prevents visual recovery from ocular surgery. Honey is a supersaturated solution of sugars with an acidic pH, high osmolarity and low water content. These characteristics inhibit the growth of micro-organisms, reduce oedema and promote epithelialisation. This clinical case series describes the use of a regulatory approved Leptospermum species honey ophthalmic product, in the management of post-operative corneal oedema and bullous keratopathy. Methods A retrospective review of 18 consecutive cases (30 eyes) with corneal oedema persisting beyond one month after single or multiple ocular surgical procedures (phacoemulsification cataract surgery and additional procedures) treated with Optimel Antibacterial Manuka Eye Drops twice to three times daily as an adjunctive therapy to conventional topical management with corticosteroid, aqueous suppressants, hypertonic sodium chloride five per cent, eyelid hygiene and artificial tears. Visual acuity and central corneal thickness were measured before and at the conclusion of Optimel treatment. Results A temporary reduction in corneal epithelial oedema lasting up to several hours was observed after the initial Optimel instillation and was associated with a reduction in central corneal thickness, resolution of epithelial microcysts, collapse of epithelial bullae, improved corneal clarity, improved visualisation of the intraocular structures and improved visual acuity. Additionally, with chronic use, reduction in punctate epitheliopathy, reduction in central corneal thickness and improvement in visual acuity were achieved. Temporary stinging after Optimel instillation was experienced. No adverse infectious or inflammatory events occurred during treatment with Optimel. Conclusions Optimel was a safe and effective adjunctive therapeutic strategy in the management of persistent post-operative corneal oedema and warrants further investigation in clinical trials.

Turbulent mixed convection in a shallow enclosure with a series of heat generating components

Turbulent mixed convection flow and heat transfer in a shallow enclosure with and without partitions and with a series of block-like heat generating components is studied numerically for a range of Reynolds and Grashof numbers with a time-dependent formulation. The flow and temperature distributions are taken to be two-dimensional. Regions with the same velocity and temperature distributions can be identified assuming repeated placement of the blocks and fluid entry and exit openings at regular distances, neglecting the end wall effects. One half of such module is chosen as the computational domain taking into account the symmetry about the vertical centreline. The mixed convection inlet velocity is treated as the sum of forced and natural convection components, with the individual components delineated based on pressure drop across the enclosure. The Reynolds number is based on forced convection velocity. Turbulence computations are performed using the standard k– model and the Launder–Sharma low-Reynolds number k– model. The results show that higher Reynolds numbers tend to create a recirculation region of increasing strength in the core region and that the effect of buoyancy becomes insignificant beyond a Reynolds number of typically 5×105. The Euler number in turbulent flows is higher by about 30 per cent than that in the laminar regime. The dimensionless inlet velocity in pure natural convection varies as Gr1/3. Results are also presented for a number of quantities of interest such as the flow and temperature distributions, Nusselt number, pressure drop and the maximum dimensionless temperature in the block, along with correlations.

General practitioner utilisation amongst urban Aboriginal and Torres Strait Islander children aged less than 5 years

Aim There are limited studies documenting the frequency and reason for attendance to primary health care services in Australian children, particularly for urban Aboriginal and Torres Strait Islander children. This study describes health service utilisation in this population in an urban setting. Methods An ongoing prospective cohort study of Aboriginal and Torres Strait Islander children aged <5 years registered with an urban Aboriginal and Torres Strait Islander primary health care centre in Brisbane, Australia. Detailed demographic, clinical, health service utilisation and risk factor data are collected by Aboriginal researchers at enrolment and monthly for a period of 12 months on each child. The incidence of health service utilisation was calculated according to the Poisson distribution. Results Between 14 February 2013 and 31 October 2014, 118 children were recruited, providing data for 535 child-months of observation. Ninety-one percent of children were Aboriginal, 4% Torres Strait Islander and 5% were both Aboriginal and Torres Strait Islander. The incidence of presentations to see a doctor for any reason was 43.9 episodes/100 child months (95%CI 38.4 – 49.9) The most common reasons for presentation were for immunisations (23%), respiratory illnesses (19%) and for Australian Government funded Indigenous child health check (16%). The primary health services used, for majority of these visits were Aboriginal and Torres Strait Islander specific medical services (61%). Conclusions Within a cultural-specific service for an urban Aboriginal and Torres Strait Islander people, there is a high frequency of childhood attendance at for primary health care services. Well-health checks and respiratory illnesses were the most common reasons. The high proportion of visits for well child services suggests a potential for opportunistic health promotion, education and early interventions across a range of child health issues.

Stress analysis of carotid plaque based on in vivo MRI of acute symptomatic and asymptomatic patients

Stress analysis within carotid plaques based on in vivo MR imaging has shown to be useful for the identification of vulnerable atheroma. This study is to investigate whether magnetic resonance imaging (MRI) based-biomechanical stress analysis of carotid plaques can differentiate acute symptomatic and asymptomatic patients. 54 asymptomatic and 45 acute symptomatic patients underwent in vivo multi-contrast MRI of the carotid arteries. Plaque geometry used for finite element analysis was derived from in vivo MR images at the site of maximum and minimum plaque burden. In total 198 slices were used for the computational simulations. A pre shrink technique was used to refine the simulation. Maximum principle stress at the vulnerable plaque sites (i.e. critical stress) was extracted for the selected slices and a comparison was performed between the two groups. Critical stress at the site of maximum plaque burden is significantly higher in acute symptomatic patients as compared to asymptomatic patients [median: 198.0kPa (inter quartile range (IQR) = (119.8 - 359.0) vs. 138.4kPa (83.8, 242.6), p=0.04]. No significant difference was found at the minimum plaque burden site between the two groups [196.7kPa (133.3- 282.7) vs. 182.4kPa (117.2 - 310. 6), p=0.82). Stress analysis at the site of maximal plaque burden can be effectively used for differentiating acute symptomatic carotid plaques from asymptomatic plaques. This maybe potentially used for development of biomechanical risk stratification criteria based on plaque burden in future studies.

Curvedness study on atherosclerosis plaques and its implications to plaque stress

Atherosclerosis plaque rupture has been considered to be a mechanical failure of the thin fibrous cap, resulted from extreme plaque stress. Plaque stress was affected by many factors from morphological features to biological abnormalities. In this study, geometrical factors (curvedness, fibrous cap thickness) were studied on assessing plaque vulnerability in comparison with stress analysis results obtained by fluid structure interaction from 20 human carotid atherosclerosis plaques. The results show that plaque surface curvedness could contribute to extreme stress level, especially in plaque shoulder region. General plaque stress distribution could be predicted by fibrous cap thickness and curvedness with multi-regression model. With more features included in the regression model, plaque stress could be easily calculated and used to assess plaque vulnerability.

LISA as a dark energy probe

Recently, it has been shown that the inclusion of higher signal harmonics in the inspiral signals of binary supermassive black holes (SMBH) leads to dramatic improvements in the parameter estimation with Laser Interferometer Space Antenna (LISA). In particular, the angular resolution becomes good enough to identify the host galaxy or galaxy cluster, in which case the redshift can be determined by electromagnetic means. The gravitational wave signal also provides the luminosity distance with high accuracy, and the relationship between this and the redshift depends sensitively on the cosmological parameters, such as the equation-of-state parameter w = p(DE)/rho(DE) of dark energy. Using binary SMBH events at z < 1 with appropriate masses and orientations, one would be able to constrain w to within a few per cent. We show that, if the measured sky location is folded into the error analysis, the uncertainty on w goes down by an additional factor of 2-3, leaving weak lensing as the only limiting factor in using LISA as a dark energy probe.

Between Herbals et alia: Intertextuality in Medieval English Herbals

This study reports a corpus-based study of medieval English herbals, which are texts conveying information on medicinal plants. Herbals belong to the medieval medical register. The study charts intertextual parallels within the medieval genre, and between herbals and other contemporary medical texts. It seeks to answer questions where and how herbal texts are linked to each other, and to other medical writing. The theoretical framework of the study draws on intertextuality and genre studies, manuscript studies, corpus linguistics, and multi-dimensional text analysis. The method combines qualitative and quantitative analyses of textual material from three historical special-language corpora of Middle and Early Modern English, one of which was compiled for the purposes of this study. The text material contains over 800,000 words of medical texts. The time span of the material is from c. 1330 to 1550. Text material is retrieved from the corpora by using plant name lists as search criteria. The raw data is filtered through qualitative analysis which produces input for the quantitative analysis, multi-dimensional scaling (MDS). In MDS, the textual space that parallel text passages form is observed, and the observations are explained by a qualitative analysis. This study concentrates on evidence of material and structural intertextuality. The analysis shows patterns of affinity between the texts of the herbal genre, and between herbals and other texts in the medical register. Herbals are most closely linked with recipe collections and regimens of health: they comprise over 95 per cent of the intertextual links between herbals and other medical writing. Links to surgical texts, or to specialised medical texts are very few. This can be explained by the history of the herbal genre: as herbals carry information on medical ingredients, herbs, they are relevant for genres that are related to pharmacological therapy. Conversely, herbals draw material from recipe collections in order to illustrate the medicinal properties of the herbs they describe. The study points out the close relationship between medical recipes and recipe-like passages in herbals (recipe paraphrases). The examples of recipe paraphrases show that they may have been perceived as indirect instruction. Keywords: medieval herbals, early English medicine, corpus linguistics, intertextuality, manuscript studies

Empowering innovative and active citizens: Design education in an Australian independent school

Consumerism is arguably one of the strongest forces affecting society today. Its affect on young people and their ability and desire to create, design, and innovate is cause for concern. It has been suggested that design, when viewed as “a fundamental category of meaning making” (Cope and Kalantzis, 2010, p.597), can be conceived as a “foundational paradigm for representation and action” (Cope and Kalantzis, 2011, p.49). As a component of a general education, it has the capacity to give future generations a framework for collaborative creative and critical thinking required for business innovation, while developing resourceful optimism, motivation, morality and the citizenship needed to develop awareness and resilience to this ideology (Design Commission, 2011; Design Council, 2011). However, to date clearly defined frameworks and empirical data surrounding design education integration in secondary school contexts and its impact on innovation and active citizenship in Australia, is extremely limited. This paper will explore the value of a hands-on and collaborative design-based education model in an independent secondary school environment in Australia and its effect on students’ self- perception, core beliefs, empowered participation and ability to innovate towards sustainability. Following is an overview of relevant literature, the research question, and potential significance and contribution of this research.

Leveraging Lean Production Philosophy for Rationalising a Non-Linear Representation of Construction Specifications

This paper presents an approach, based on Lean production philosophy, for rationalising the processes involved in the production of specification documents for construction projects. Current construction literature erroneously depicts the process for the creation of construction specifications as a linear one. This traditional understanding of the specification process often culminates in process-wastes. On the contrary, the evidence suggests that though generalised, the activities involved in producing specification documents are nonlinear. Drawing on the outcome of participant observation, this paper presents an optimised approach for representing construction specifications. Consequently, the actors typically involved in producing specification documents are identified, the processes suitable for automation are highlighted and the central role of tacit knowledge is integrated into a conceptual template of construction specifications. By applying the transformation, flow, value (TFV) theory of Lean production the paper argues that value creation can be realised by eliminating the wastes associated with the traditional preparation of specification documents with a view to integrating specifications in digital models such as Building Information Models (BIM). Therefore, the paper presents an approach for rationalising the TFV theory as a method for optimising current approaches for generating construction specifications based on a revised specification writing model.

Classification and rating of strong-motion earthquake records

Ninety-two strong-motion earthquake records from the California region, U.S.A., have been statistically studied using principal component analysis in terms of twelve important standardized strong-motion characteristics. The first two principal components account for about 57 per cent of the total variance. Based on these two components the earthquake records are classified into nine groups in a two-dimensional principal component plane. Also a unidimensional engineering rating scale is proposed. The procedure can be used as an objective approach for classifying and rating future earthquakes.

Aseptic Packaging of Tropical Fruit Purees

The object of this investigation was to develop high quality aseptically packaged mango and passionfruit puree products. Kensington mango puree (acidified to ph 3.5) and deseeded passionfruit pulp (ph 3.0) were sterilised in a scraped-surface heat exchanger, cooled to 20°C in a tubular heat-exchanger, aseptically packaged in sterile laminate bags. Six sterilising time/temperature combinations were compared - 85°C/15 secs, 85°C/60 secs, 90° C/15 secs, 90°/60 secs, 95°C/15 secs, 95°C/60 secs. Products were assessed immediately after processing, and after eight months ambient storage, for microbial, physical, chemical, and sensory quality. All treatments were microbiologically sound and showed no enzyme activity. Sensory quality was very acceptable, and there was no evidence of heat damage. Quality (especially colour and flavour) decreased during storage in all heat treatments.

Questions about multidisciplinary teams

Multidisciplinary care (MDC) involves health professionals from a range of disciplines working together as a team (a multidisciplinary team – MDT) to deliver comprehensive care that addresses as many of a patient's needs as possible. Writing in 2011, Wilcoxon and others concluded: ‘Multidisciplinary care is accepted as best practice in cancer treatment planning and care.’ Yet their report (of the national audit of multidisciplinary cancer care in Australia) indicated that two-thirds of the surveyed hospitals did not have a MDT. Further, they found that where teams did exist, one-third of patients were not told that their case would be discussed by the team; the MDT-recommended treatment plan was not included in the patient’s record one-quarter of the time; and less than 1 per cent of teams reported routine attendance by the tumour-specific minimum core team. There is sparse case authority as to the potential medico-legal consequences of MDC by MDTs. This article raises five questions about legal aspects of MDC for consideration. The questions are not limited to cancer care, as MDTs are increasingly used in other areas of medicine.

Ionized Gas towards Galactic Centre-Constraints from Low-Frequency Recombination Lines

Observations of the H272α recombination line towards the galactic centre show features near VLSR= 0, -50 and + 36 kms-1 . We have combined the parameters of these features with the available -166 measurements to obtain the properties of the ionized gas present along the line of sight and also in the -3 kpc arm-. For the line-of-sight ionized gas we get an electron density around 7 cm-3 and a pathlength through it 10-60 pc. The emission measure and the electron temperature are in the range 500-2900 pc cm-6 and 2000-6000 - respectively. The ionized gas in the 3 kpc arm has an electron density of 30 cm-3 and extends over 9 pc along the line of sight if we assume an electron temperature of 104 K. Using the available upper limit to the intensity of the H351α recombination line, we show that the distributed ionized gas responsible for the dispersion of pulsar signals should have a temperature > 4500 - and a minimum filling factor of 20 per cent. We also show that recombination lines from the -warm ionized- gas proposed by McKee & Ostriker (1977) should be detectable in the frequency range 100-150 MHz towards the galactic centre with the sensitivity available at present.

Limb-loss in pond-reared blue swimmer crabs Portunus pelagicus (L.): Effect on growth in an indoor shedding system

Limb-loss in crustaceans can reduce moult increment and delay or advance the timing of moulting, both aspects that are likely to impact upon soft-shell crab production. Pond-reared blue swimmer crabs Portunus pelagicus were harvested and maintained in a crab shedding system. The wet weight, carapace width (CW) and the occurrence of limb-loss were assessed before stocking in the shedding system and after each of the next three moults. Many of the crabs were initially missing one or two limbs and these did not grow as much as the crabs that were intact at the start of the trial. Despite its strong correlation with wet weight, CW changes proved to be misleading. Limb-loss reduced the %CW increment but not the per cent weight increment (where the later is calculated from the actual pre-moult weight). Pre-moult weight explained much of the variation in post-moult weight, with crabs moulting to approximately double their weight. Limb-loss reduced 'growth' and production from the pond because it reduced pre-moult weight but limb-loss did not alter the weight change on shedding a given weight of crabs, although some of that change now included regeneration of limbs. One can hypothesize that much of the size variation seen in pond-reared crabs may be due to accumulated effects of repeated limb-loss, rather than genetic variation.