The Independent Chronicle, 22 October 1812 (no. 3280) - Newspaper

Volumes of interest were published between 1812 and 1815 with articles about the War of 1812. Issue for Oct. 22, 1812 includes a Proclamation issued by the President of the United States offering a full pardon to ...a number of individuals who have deserted from the Army... signed in type: James Madison. Has three other acts each signed in type by Madison. Some minor war reports on pg. 2.

Wrestling Card - The Masked Marvel

The wrestler's name is The Masked Marvel and the number stamped on the reverse is 742. His real name is Dick Phillips and he was born in Buffalo and raised in Quebec. When he enlisted in WWII, he was a known wrestler. He wrestled for the Canadian Army to entertain the troops. It was the Army that created the Masked Marvel character.

Optimizing Computational Frameworks to Study the Influence of the Protein Environment on the Individual Site Energies of Chromophores in Photosystem II of Photosynthesis

Photosynthesis is a process in which electromagnetic radiation is converted into chemical energy. Photosystems capture photons with chromophores and transfer their energy to reaction centers using chromophores as a medium. In the reaction center, the excitation energy is used to perform chemical reactions. Knowledge of chromophore site energies is crucial to the understanding of excitation energy transfer pathways in photosystems and the ability to compute the site energies in a fast and accurate manner is mandatory for investigating how protein dynamics ef-fect the site energies and ultimately energy pathways with time. In this work we developed two software frameworks designed to optimize the calculations of chro-mophore site energies within a protein environment. The first is for performing quantum mechanical energy optimizations on molecules and the second is for com-puting site energies of chromophores in a fast and accurate manner using the polar-izability embedding method. The two frameworks allow for the fast and accurate calculation of chromophore site energies within proteins, ultimately allowing for the effect of protein dynamics on energy pathways to be studied. We use these frame-works to compute the site energies of the eight chromophores in the reaction center of photosystem II (PSII) using a 1.9 Å resolution x-ray structure of photosystem II. We compare our results to conflicting experimental data obtained from both isolat-ed intact PSII core preparations and the minimal reaction center preparation of PSII, and find our work more supportive of the former.

The Daily Telegraph, April 22, 1901

The Daily Telegraph, London, England (pages 7 and 8). The section” South African Rewards: Honours for the Army” has and x marked beside it. The paper has been taped and there is a hole in one of the pages. This affects the text slightly, April 22, 1901.

Crise du secteur manufacturier au Québec : ampleur et nature des restructurations impliquant des licenciements collectifs entre 2003 et 2008

Des données de Statistique Canada montrent que le Québec a perdu 86 700 emplois manufacturiers nets entre 2004 et 2008, ce qui représente un recul de 13,8% (Bernard, 2009). Un dollar canadien fort, la concurrence internationale, les délocalisations de la production et les consolidations globales d'opérations sont souvent mentionnés comme étant les causes des difficultés du secteur manufacturier canadien - principalement concentré au Québec et en Ontario. La crise financière amorcée à l’été 2007, a contribué à aggraver la crise propre au secteur manufacturier dont les origines remontent au début des années 2000 (Weir, 2007; AgirE, 2008; Pilat et al., 2006). Cette recherche examine le processus de restructuration du secteur manufacturier québécois de manière détaillée au niveau des établissements afin d’en évaluer l’ampleur et la nature entre 2003 et 2008. Les données colligées permettent de poser un regard unique et original sur les restructurations ayant impliqué des licenciements collectifs au Québec. Ces données sont issues de deux sources. D'abord, nous avons utilisé une liste d‘entreprises qui ont envoyé un avis de licenciement collectif au Ministère de l’Emploi et de la Solidarité sociale du Québec entre 2003 et 2008. En second lieu, nous avons eu recours aux archives en ligne des médias pour trouver d’autres évènements de restructuration non rapportés par le ministère ainsi que pour obtenir des informations complémentaires sur les évènements déjà compilés dans la liste du ministère. Notre méthodologie de recherche et notre typologie analytique des types de restructuration sont basées sur celles développées par l’European Monitoring Center on Change (EMCC) et reprises dans certaines études comme celles de Bronfenbrenner et Luce (2004) et Hickey et Schenk (soumis). Les résultats, présentés en termes d’événements de restructuration et d’emplois perdus, sont ventilés en fonction de quelques variables (année d’occurrence, taille de l’établissement, sous-secteur d’activité, intensité technologique, région administrative, types de restructuration). Les raisons données par l’entreprise afin de justifier la restructuration ont aussi été colligées. Au cours de la période étudiée, nous avons identifié au total 1 631 évènements de restructurations dans le secteur manufacturier à travers toutes les régions du Québec, qui ont entraîné la perte de 129 383 emplois. Ainsi, 78 246 emplois ont été perdus suite à la réduction des activités de l‘établissement et 51 137 emplois l’ont été suite à la fermeture de leur établissement. La forme la plus fréquente de restructuration est la restructuration interne, suivi par la faillite/fermeture. Les types de restructuration qui ont engendré le plus de pertes d’emplois en moyenne par évènement sont dans l’ordre, la délocalisation, la sous-traitance, la consolidation d’activités ainsi que la fusion-acquisition. L’année 2008 fut celle où il y a eu le plus grand nombre de restructurations. Montréal et la Montérégie sont les régions qui ont le plus été touchées par la restructuration, les pertes d’emplois et les fermetures d’établissements. Les industries à faible intensité technologique ont davantage été frappées par la crise manufacturière. C’est le sous-secteur du papier et du bois qui connu le plus grand nombre d’événements de restructurations. Ce sous-secteur a aussi subi les pertes d’emplois les plus importantes, suivi par le sous-secteur du textile et du vêtement. Ces deux industries se partagent plus de la moitié des fermetures d’établissements. L’insuffisance de la demande (22,1%), la concurrence internationale (14,3%), la hausse de la valeur du dollar canadien (11,2%), la réorganisation interne de l’entreprise (11,1%), la rationalisation des coûts visant une augmentation de la profitabilité (10,1%) ainsi que les difficultés financières (9,9%) sont les motifs principaux donnés par les employeurs. Nos résultats montrent qu’il y a eu deux temps dans l’évolution de la restructuration du secteur manufacturier au Québec. Un premier temps au début de la période où des changements structurels profonds ont été observés dans certaines industries (p.ex. le bois-papier et le textile-vêtement) et un second temps, en fin de période caractérisé par des changements davantage liés à la conjoncture en raison de la crise économique dont les effets commençaient à se faire sentir à ce moment (Institut de la statistique du Québec, 2009a).

Étude pilote des effets du Tandem Forsus Maxillary Corrector sur la croissance des maxillaires

Objectif : Récemment, un nouvel appareil issu de la technologie du Forsus™ et visant à corriger les malocclusions de classe III a été mis sur le marché et se popularise dans la pratique orthodontique : le Tandem Forsus Maxillary Corrector (TFMC). L’objectif de la présente étude est de mesurer les effets squelettiques, l’influence réelle sur la croissance, et les effets dento-alvéolaires du port du TFMC. Matériel et méthodes : 14 patients présentant une malocclusion de classe III (âge moyen de 9 ans 6 mois) traités par le même orthodontiste ont participé à cette étude prospective. Le groupe consiste en 10 garçons et 4 filles. Le Tandem Forsus Maxillary Corrector est porté de 12 à 14 heures par jour jusqu’à l’obtention d’une surcorrection du surplomb horizontal et une relation dentaire de classe I. Le traitement est généralement d’une durée de 8 à 9 mois. Des radiographies céphalométriques latérales prises avant (T1) et après (T2) le traitement ont été analysées afin de déterminer les changements dentaires et squelettiques. Les résultats ont été comparés à un groupe contrôle composé de 42 enfants provenant du Centre de croissance de l’Université de Montréal. Les radiographies ont été tracées et analysées de manière aveugle à l’aide du logiciel Dolphin Imaging (ver 11.0, Patterson Dental, Chatsworth, California). L’erreur sur la méthode a été évaluée avec la formule de Dahlberg, le coefficient de corrélation intra-classe et l’indice de Bland-Altman. L’effet du traitement a été évalué à l’aide du test t pour échantillons appariés. L’effet de la croissance pour le groupe contrôle a été calculé à l’aide d’un test t pour échantillons indépendants. Résultats : L’utilisation du TFMC produit un mouvement antérieur et une rotation antihoraire du maxillaire. De plus, il procline les incisives supérieures et rétrocline les incisives inférieures. Une rotation antihoraire du plan occlusal contribue aussi à la correction de la malocclusion de classe III. Par contre, le TFMC ne semble pas avoir pour effet de restreindre la croissance mandibulaire. Conclusion : La présente étude tend à démontrer que le port de l’appareil TFMC a un effet orthopédique et dento-alvéolaire significatif lors du traitement correctif des malocclusions modérées de classe III.

Between play and design : the emergence of hybrid-identity in single-player videogames

Pour respecter les droits auteur, la version electronique de cette thèse a été dépouillée de ses documents visuels et audio-visuels. La version intégrale de la thèse a été déposée au Service de la gestion des documents et des archives de l'Université de Montréal.

Studies on Rubber Composition as Passive Acoustic Materials in Underwater Electro Acoustic Tranducer Technology and Their aging Characteristic

The research work has been in the area of compounding and characterization of rubbers for use in under water electro acoustic transducers. The study also covers specific material system such as encapsulation materials, baffle material, seal material, etc. Life prediction techniques of under water rubbers in general have been established with reference to more than one functional property. Ranges of passive materials, besides the active sensing material go into the construction of underwater electro acoustic transducers. Reliability of the transducer is critically dependent on these passive materials. Rubbers are a major class of passive materials. The present work concentrates on these materials. Conventional rubbers are inadequate to meet many of the stringent function specific requirements. There exists a large gap of information in the rubber technology of underwater rubbers, particularly relating to underwater electro acoustic transducers. This study is towards filling up the gaps of information in this crucial area. Water intake into rubber is considered as the single most important issue for the long-term performance of rubbers, especially Neoprene. In this study, the cause and effects of a range of parameters affecting the water absorption by diffusion and permeation have been investigated.

Effect of Substrate Temperature on the Structural and Luminescent Characteristics of RF-Magnetron-Sputtered ZnGa2O4:Dy3+ Thin Films

ZnGa2O4:Dy3+ phosphor thin films were deposited on quartz substrates by radio frequency rf magnetron sputtering and the effect of substrate temperature on its structural and luminescent properties was investigated. Polycrystalline film could be deposited even at room temperature. The crystalline behavior, Zn/Ga ratio, and surface morphology of the films were found to be highly sensitive to substrate temperature. Under UV illumination, the as-deposited films at and above 300°C gave white luminescence even without any postdeposition treatments. The photoluminescent PL emission can be attributed to the combined effect of multicolor emissions from the single luminescence center Dy3+ via host-sensitization. Maximum PL emission intensity was observed for the film deposited at 600°C, and the CIE chromaticity coordinates of the emission were determined to be x,y = 0.34, 0.31 .

IA Critical Study of the Impact of Institutional Finance on Agriculture in Selected Villages of Ernakulam Revenue District

Vast changes have taken place in the field of institutional rural credit in India since the nationalisation of nineteen commercial banks in 1969. The supply of institutional finance to cultivators amounted to 63.2 percent of the total credit in 1981 compared to 31.2 percent in 1971. Insti tutionalisation of agricultural credit envisaged two objectives in general. One was to emancipate cultivators and farmers from the clutches of indigenous financiers and money lenders. The second was to make farmers financially capable of adopting the new technology or improved practices in agriculture so as to increase their agricultural production and thereby contributing to the development of agriculture in India. Though vast literature on Institutional Credi t and agriculture is available, no indepth and serious work examining thoroughly the cause of credit diversion has been undertaken so far. The present study is an attempt to fill up this gap. The study will be helpful to lending insti tutions, viz. Co-ope:r-atives, Commercial banks and various other insti tutional agencies in connection with their lending activity_ Also, the study will help government in .formulating proper policies that will insure a preferential treatment in favour of the most needy category of farmers and cultivators with respect to agricultural credit disbursement

Studies on the microbial pathogens salmonella and vibrio parahfamolyticus in selected marine products

This thesis deals initially with a literature reference survey ,taxonomy, their incidence in selected food fishes and shellfishes, and their incidence and distribution, their survival during different types of processing, their heat survival at temperatures of 50 ,55 and 60 degree centigrade their growth initiation at different low levels of pHs(4.0 to 10) ,and their developmental resistance to various chemical agents. The trials for the study were collected from various landing centre at cochin and the retail outlets. Based on these data collections the researcher was able to obtain more knowledge of the processing technology and the survival of pathogens like salmonella and vibrio parahaemolyticus.

Studies on rubber compositions as passive acoustic materials in underwater electro acoustic transducer technology-and their aging characteristics

Rubber has become an indispensable material in Ocean technology. Rubber components play critical roles such as sealing, damping, environmental protection, electrical insulation etc. in most under water engineering applications. Technology driven innovations in electro acoustic transducers and other sophisticated end uses have enabled quantum jump in the quality and reliability of rubber components. Under water electro acoustic transducers use rubbers as a critical material in their construction. Work in this field has lead to highly reliable and high performance materials which has enhanced service life of transducers to the extent of 1015 years. Present work concentrates on these materials. Conventional rubbers are inadequate to meet many of the stringent functional of the requirements. There exists large gap of information in the rubber technology of under water rubbers, particularly in the context of under water electro acoustic transducers. Present study is towards filling up the gaps of information in this crucial area. The research work has been in the area of compounding and characterisation of rubbers for use in under water electro acoustic transducers. The study also covers specific material system such as encapsulation material, baffle material, seal material, etc. Life prediction techniques of under water rubbers in general has been established with reference to more than one functional property. This thesis is divided into 6 chapters.

Studies on The Eco Biology of The Indian Pearl Oyster, Pinctada Fucata (Gould)

The present work aims to study induced maturation of the pearl oyster for induced spawning experiments. The work on larval development was done with a view to developing techniques for the artificial rearing of commercially important pearl oyster P fucata, and also to elucidate the principles and problems of tropical bivalve larvae in general for detailed investigations in the future. The present study is designed to probe into the details of the basic aspects of the biology related to the hatchery technology of Pinctada fucata and the understanding of the factors which influence induction of maturation, spawning, larval rearing and spat settlement. This would go a long way in the upgradation of hatchery technology of the Indian Pearl oyster Pinctada fucata fora commercial level seed production..

Technological Change and the Development of the Primary Fishing Industry of Kerala - A Study of Limited Growth

Induction of growth in the primary marine fishing industry of Kerala is a sine gua Qgn for improving the economy of the fishermen, the state's domestic product as well as earning more foreign exchange for the country. The State Administration has been trying to instil growth into the industry eversince the output of the industry showed marked sign of decline (particularly after 1975). Significantly, it has attempted to strengthen the traditional sector, (which is considered to be the crucial sector of the primary marine fishing industry of the state) by introducing intermediate technology and by revamping the organisational structure of the industry. But it appears that the production system in the primary marine fishing industry of Kerala has been severely constrained by the existing technology, organisation of production and marketing institutions. Regeneration of growth in the industry calls forth an understanding of the 'process' of growth in the industry and the need to réorganise it with new technology, and new organisations. The present study is an attempt to unraval the process of growth in the primary marine fishing industry of Kerala since 1951

Workforce Issues in the Greater Boston Health Care Industry: Implications for Work and Family

Interviews with more than 40 leaders in the Boston area health care industry have identified a range of broadly-felt critical problems. This document synthesizes these problems and places them in the context of work and family issues implicit in the organization of health care workplaces. It concludes with questions about possible ways to address such issues. The defining circumstance for the health care industry nationally as well as regionally at present is an extraordinary reorganization, not yet fully negotiated, in the provision and financing of health care. Hoped-for controls on increased costs of medical care – specifically the widespread replacement of indemnity insurance by market-based managed care and business models of operation--have fallen far short of their promise. Pressures to limit expenditures have produced dispiriting conditions for the entire healthcare workforce, from technicians and aides to nurses and physicians. Under such strains, relations between managers and workers providing care are uneasy, ranging from determined efforts to maintain respectful cooperation to adversarial negotiation. Taken together, the interviews identify five key issues affecting a broad cross-section of occupational groups, albeit in different ways: Staffing shortages of various kinds throughout the health care workforce create problems for managers and workers and also for the quality of patient care. Long work hours and inflexible schedules place pressure on virtually every part of the healthcare workforce, including physicians. Degraded and unsupportive working conditions, often the result of workplace "deskilling" and "speed up," undercut previous modes of clinical practice. Lack of opportunities for training and advancement exacerbate workforce problems in an industry where occupational categories and terms of work are in a constant state of flux. Professional and employee voices are insufficiently heard in conditions of rapid institutional reorganization and consolidation. Interviewees describe multiple impacts of these issues--on the operation of health care workplaces, on the well being of the health care workforce, and on the quality of patient care. Also apparent in the interviews, but not clearly named and defined, is the impact of these issues on the ability of workers to attend well to the needs of their families--and the reciprocal impact of workers' family tensions on workplace performance. In other words, the same things that affect patient care also affect families, and vice versa. Some workers describe feeling both guilty about raising their own family issues when their patients' needs are at stake, and resentful about the exploitation of these feelings by administrators making workplace policy. The different institutions making up the health care system have responded to their most pressing issues with a variety of specific stratagems but few that address the complexities connecting relations between work and family. The MIT Workplace Center proposes a collaborative exploration of next steps to probe these complications and to identify possible locations within the health care system for workplace experimentation with outcomes benefiting all parties.