A model to similate the strength and deformation of concrete in compression

A simple model is developed to represent the strength and deformational characteristics of concrete when subjected to a rate of strain or rate of stress or creep or relaxation testing under uniaxial compression.

Prediction of solid block masonry prism compressive strength using FE model

Masonry strength is dependent upon characteristics of the masonry unit,the mortar and the bond between them. Empirical formulae as well as analytical and finite element (FE) models have been developed to predict structural behaviour of masonry. This paper is focused on developing a three dimensional non-linear FE model based on micro-modelling approach to predict masonry prism compressive strength and crack pattern. The proposed FE model uses multi-linear stress-strain relationships to model the non-linear behaviour of solid masonry unit and the mortar. Willam-Warnke's five parameter failure theory developed for modelling the tri-axial behaviour of concrete has been adopted to model the failure of masonry materials. The post failure regime has been modelled by applying orthotropic constitutive equations based on the smeared crack approach. Compressive strength of the masonry prism predicted by the proposed FE model has been compared with experimental values as well as the values predicted by other failure theories and Eurocode formula. The crack pattern predicted by the FE model shows vertical splitting cracks in the prism. The FE model predicts the ultimate failure compressive stress close to 85 of the mean experimental compressive strength value.

On the theory of the indentation test for the measurement of tensile strength of brittle materials

A theoretical solution has been obtained for the state of stress in a rectangular plate under a pair of symmetrically placed rigid indenters. The stress distributions along the two central axes have been calculated for a square plate assuming the pressure distribution under the indenters as uniform, parabolic and one resulting from 'constant displacement' on a semiinfinite boundary, for different ratios of indenter-width to side of square. The results are compared with those of photoelastic analysis of Berenbaum and Brodie and the validity of the solution is discussed. The solution has been extended to orthotropic materials and numerical results for one type of coal are given.

Resistance responses blocking systemic movement of Potato virus A in potato

Peruna kestää A-virusta estämällä sen leviämistä Peruna on maissin ohella maailman kolmanneksi tärkein ravintokasvi vehnän ja riisin jälkeen. Perunaa lisätään kasvullisesti mukuloita istuttamalla, jolloin virukset siirtyvät sairaiden siemenmukuloiden välityksellä kasvukaudesta toiseen. Virustauteja voi torjua ainoastaan terveen siemenperunan ja kestävien lajikkeiden avulla. Kestävyys perustuu usein siihen, että kasvi estää viruksen leviämisen tartuntakohdasta välttyäkseen virustaudilta. Tässä työssä tutkittiin kolmea perunan A-viruksen (PVA) liikkumista estävää kestävyysmekanismia perunassa. Lisäksi työn kokeelliseen osaan oleellisesti kuuluvaa virustartutusta varten kehitettiin uusi paranneltu versio geenipyssystä. Tämä itse rakennettu laite optimoitiin PVA:n tartuttamiseen mahdollisimman helposti ja pienin käyttökustannuksin. Tutkimuksen kohteena olleessa perunan risteytysjälkeläistössä oli PVA:ta kestäviä kasveja (ryhmä nnr), jotka estivät viruksen liikkumisen aiheuttamatta oireita tartutuskohdassa, sekä kasveja, joissa PVA aiheutti kuolioläikkinä näkyvän yliherkkyysvasteen (ryhmä HR). Molemmissa kestävyystyypeissä virus pystyi monistumaan ja leviämään solusta soluun paikallisesti, mutta liikkuminen muihin kasvinosiin nilan kautta estyi. Ryhmän nnr kasveissa PVA-tartunta ei aiheuttanut tilastollisesti merkitsevää muutosta useimpien geenien ilmenemiseen tartuntakohdassa. Ainoastaan geeniperhe, joka ilmentää tiettyä proteinaasi-inhibiittoria (PI), reagoi PVA:han 24 tuntia tartutuksesta. Kun tämän PVA:han reagoivan geeniperheen jäsenet hiljennettiin nnr- perunalinjoissa, ne muuttuivat alttiiksi PVA:lle ja virus levisi tartuntakohdasta muihin kasvinosiin. Tulos osoittaa, että PI on viruskestävyystekijä. Lisäksi muut tutkimuksessa saadut tulokset tukevat mahdollisuutta, että PI estää PVA:n P1-proteinaasin toimintaa. HR-linjoissa todettiin erilaisiin puolustusvasteisiin liittyvien PR-geenien aktivoitumista PVA-tartunnan seurauksena, mutta myös ilman sitä kasvien kasvettua mullassa noin neljä viikkoa. Sen sijaan solukkoviljelyssä tai vasta kaksi viikkoa mullassa kasvaneissa kasveissa vastaavaa ei vielä todettu. Tulos viittaa siihen, että HR-perunat reagoivat herkemmin ympäristöön ja/tai kasvin kehitysasteeseen laukaisten puolustusvasteita, jotka saattavat parantaa kestävyyttä taudinaiheuttajia vastaan. Kolmas tutkittu kestävyystyyppi havaittiin Pito-perunalajikkeessa. Se muistutti nnr-kestävyyttä siten, että myös siinä viruksen liikkuminen nilassa muihin kasvinosiin estyi. PVA:n todettiin pysähtyvän vasta lehtiruodin tyvelle muodostuvaan irtoamisvyöhykkeeseen, mitä havainnollistettiin käyttämällä muunnettua PVA-rotua, joka tuotti UV-valossa fluoresoivaa vihreää valoa. Tulos viittaa siihen, että virus ei pääse kulkemaan vyöhykkeeseen kuuluvan suojaavan kerroksen läpi, jollei sillä ole pääsyä nilaan. Tällainen kestävyys on tarpeen, jotta virus ei voi korvata nilakuljetusta solusta soluun leviämisellä. Tulokset tuovat uusia näkökulmia kasvien viruskestävyyteen ja auttavat selittämään viruksen nilakuljetuksen estymistä sekä solusta soluun leviämisen pysähtymistä kestävissä kasveissa.

Effect of disorder on the exponent in the coherence region in high temperature superconductors

Effect of disorder on the electrical resistance near the superconducting transition temperature in the paracoherence region of high temperature YBa2CU3O7-delta (YBCO) thin film superconductor is reported. For this, c-axis oriented YBa2Cu3O7-delta thin films having superconducting transition width varying between 0.27 K and 6 K were deposited using laser ablation and high pressure oxygen sputtering techniques. Disorder in these films was further created by using 100 MeV oxygen and 200 MeV silver ions with varying fluences. It is observed that the critical exponent in the paracoherence region for films with high transition temperature and small transition width is in agreement with the theoretically predicted value (gamma = 1.33) and is not affected by disorder, while for films with lower transition temperature and larger transition width the value of exponent is much larger as compared to that theoretically predicted and it varies from sample to sample and usually changes with disorder induced by radiation. This difference in the behaviour of the exponent has been explained on the basis of differences in the strength of weak links and the transition between temperatures T. and T, is interpreted as a percolation like transition with disorder. (c) 2006 Elsevier B.V. All rights reserved.

Molecular Basis for the Role of Staphylococcus aureus Penicillin Binding Protein 4 in Antimicrobial Resistance

Penicillin binding proteins (PBPs) are membrane-associated proteins that catalyze the final step of murein biosynthesis. These proteins function as either transpeptidases or carboxypeptidases and in a few cases demonstrate transglycosylase activity. Both transpeptidase and carboxypeptidase activities of PBPs occur at the D-Ala-D-Ala terminus of a murein precursor containing a disaccharide pentapeptide comprising N-acetyl-glucosamine and N-acetyl-muramic acid-L-Ala-D-Glu-L-Lys-D-Ala-D-Ala. beta-Lactam antibiotics inhibit these enzymes by competing with the pentapeptide precursor for binding to the active site of the enzyme. Here we describe the crystal structure, biochemical characteristics, and expression profile of PBP4, a low-molecular-mass PBP from Staphylococcus aureus strain COL. The crystal structures of PBP4-antibiotic complexes reported here were determined by molecular replacement, using the atomic coordinates deposited by the New York Structural Genomics Consortium. While the pbp4 gene is not essential for the viability of S. aureus, the knockout phenotype of this gene is characterized by a marked reduction in cross-linked muropeptide and increased vancomycin resistance. Unlike other PBPs, we note that expression of PBP4 was not substantially altered under different experimental conditions, nor did it change across representative hospital- or community-associated strains of S. aureus that were examined. In vitro data on purified recombinant S. aureus PBP4 suggest that it is a beta-lactamase and is not trapped as an acyl intermediate with beta-lactam antibiotics. Put together, the expression analysis and biochemical features of PBP4 provide a framework for understanding the function of this protein in S. aureus and its role in antimicrobial resistance.

The fracture toughness of bulk metallic glasses

Stiffness, strength, and toughness are the three primary attributes of a material, in terms of its mechanical properties. Bulk metallic glasses (BMGs) are known to exhibit elastic moduli at a fraction lower than crystalline alloys and have extraordinary strength. However, the reported values of fracture toughness of BMGs are highly variable; some BMGs such as the Zr-based ones have toughness values that are comparable to some high strength steels and titanium alloys, whereas there are also BMGs that are almost as brittle as silicate glasses. Invariably, monolithic BMGs exhibit no or low crack growth resistance and tend to become brittle upon structural relaxation. Despite its critical importance for the use of BMGs as structural materials, the fracture toughness of BMGs is relatively poorly understood. In this paper, we review the available literature to summarize the current understanding of the mechanics and micromechanisms of BMG toughness and highlight the needs for future research in this important area.

Effect of matrix strength on the mechanical properties of Al-Zn-Mg/SiCp composites

The mechanical properties of Al-Zn-Mg alloy reinforced with SiCP composites prepared by solidification route were studied by altering the matrix strength with different heat treatments. With respect to the control alloy, the composites have shown similar ageing behaviour in terms of microhardness data at 135 degrees C. It was shown that although composites exhibited enhanced modulus values, the strengthening was found to be dependent on the damage that is occurring during straining. Thus the initial matrix strength plays an important role in determining the strengthening. Consequently, compression data had shown a different trend compared to tension. (C) 2000 Elsevier Science Ltd. All rights reserved.

Effect of copper addition on the fracture and fatigue crack growth behavior of solution heat-treated SUS 304H austenitic steel

Small additions of Cu to the SUS 304H, a high temperature austenitic stainless steel, enhance its high temperature strength and creep resistance. As Cu is known to cause embrittlement, the effect of Cu on room temperature mechanical properties that include fracture toughness and fatigue crack threshold of as-solutionized SUS 304H steel were investigated in this work. Experimental results show a linear reduction in yield and ultimate strengths with Cu addition of up to 5 wt.% while ductility drops markedly for 5 wt.% Cu alloy. However, the fracture toughness and the threshold stress intensity factor range for fatigue crack initiation were found to be nearly invariant with Cu addition. This is because the fracture in this alloy is controlled by the debonding from the matrix of chromium carbide precipitates, as evident from fractography. Cu, on the other hand, remains either in solution or as nano-precipitates and hence does not influence the fracture characteristics. It is concluded that small additions of Cu to 304H will not have adverse effects on its fracture and fatigue behavior. (C) 2010 Elsevier B.V. All rights reserved.

Ultimate Strength of RC Wall Panels in One-Way In-Plane Action

Test results of 24 reinforced concrete wall panels in one-way in-plane action are presented. The panels were loaded at a small eccentricity to reflect possible eccentric loading in practice. Influences of slenderness ratio, aspect ratio, vertical steel, and horizontal steel on the ultimate load are studied. An empirical equation modifying two existing methods is proposed for the prediction of ultimate load. The modified equation includes the effects of slenderness ratio, amount of vertical steel, and aspect ratio. The results predicted by the proposed modified method and five other available equations are compared with 48 test data. The proposed modified equation is found to be satisfactory and, additionally, includes the effect of aspect ratio which is not present in other methods.

Voltage delay during constant-current or constant-resistance discharge of Mg-MnO2 dry cells: A comparative study

A theoretical approach has been developed to relate the voltage delay transients of the Mg-MnO2 dry cell observed during discharge by two commonly employed modes, viz., (1) at constant current, and (2) across a constant resistance. The approach has been verified by comparison of experimentally obtained transients with those generated from theory. The method may be used to predict the delay parameters of the Mg-MnO2 dry cell under the two modes of discharge and can, in principle, be extended to lithium batteries.

Drained shear strength of fine-grained soil-solid surface interfaces

Herein are reported the results of an investigation on the effective angle of interfacial friction between fine-grained soils and solid surfaces as influenced by the roughness of the material surface, the soil type and the overconsolidation ratio. The ratio of interfacial friction angle to the angle of internal friction (evaluated at constant overconsolidation ratio) of the soil is independent of the overconsolidation ratio. An empirical correlation between this ratio and the roughness of the interface has been proposed.

Tracking Random Walk of Individual Domain Walls in Cylindrical Nanomagnets with Resistance Noise

The stochasticity of domain-wall (DW) motion in magnetic nanowires has been probed by measuring slow fluctuations, or noise, in electrical resistance at small magnetic fields. By controlled injection of DWs into isolated cylindrical nanowires of nickel, we have been able to track the motion of the DWs between the electrical leads by discrete steps in the resistance. Closer inspection of the time dependence of noise reveals a diffusive random walk of the DWs with a universal kinetic exponent. Our experiments outline a method with which electrical resistance is able to detect the kinetic state of the DWs inside the nanowires, which can be useful in DW-based memory designs.