Species composition, distribution, and relative abundance of fishes in the coastal habitat off the southeastern United States

Ichthyofauna of the coastal «10 m depth) habitat of the South Atlantic Bight were investigated between Cape Fear, North Carolina, and the St. John's River, Florida. Trawl collections from four nonconsecutive seasons in the period July 1980 to December 1982 indicated that the fish community is dominated by the family Sciaenidae, particularly juvenile forms. Spot (Leiostomus xanthurus) and Atlantic croaker (Micropogonias undulatus) were the two most abundant species and dominated catches during all seasons. Atlantic menhaden (Brevoortin tyrannus) was also very abundant, but only seasonally (winter and spring) dominant in the catches. Elasmobranch fIShes, especially rajiforms and carcharinids, contributed to much of the biomass of fishes collected. Total fish abundance was greatest in winter and lowest in summer and was influenced by the seasonality of Atlantic menhaden and Atlantic croaker in the catches. Biomass was highest in spring and lowest in summer, and was influenced by biomass of spot. Fish density ranged from 321 individuals and 12.2 kg per hectare to 746 individuals and 25.2 kg per hectare. Most species ranged widely throughout the bight, and showed some evidence of seasonal migration. Species assemblages were dominated by ubiquitous year-round residents of the coastal waters of the bight. Diversity (H') was highest in summer, and appeared influenced by the evenness of distribution of individuals among species. (PDF file contains 56 pages.)

The Distribution of Juvenile Fishes in Maryland Coastal Bays in Relation to Environmental Factors: a Multivariate Analysis

Fish assemblage structure of Maryland's coastal lagoon complex was analyzed for spatial and seasonal patterns for the period 1991-2000. Data was made available by Maryland Department of Natural Resources from their MD Coastal Bays Finfish Survey. Dominant species from separate trawl and wiw surveys included blue crab Callinectes sapidus (erroneously included here as a "fish" due to its dominance and commercial importance), bay anchovy Anchoa mitchilli, spot Leiostomous xanthurus, silver perch Bairdiella ehrysoura, and Atlantic menhaden Brevwrtia tyrannus. Ninety-four fish species were identified in the two surveys, a diversity substantially higher than other survey records for Middle Atlantic Bight estuarine and lagoon systems (richness=26 to 78 species). Total species richness for the trawl survey was highest in Chincoteague and lowest in Assawoman and Sinepuxent. On the other hand, mean richness per tow (-area) and related Shannon Weiner Diversity Index were significantly higher in the northern two bays (Assawoman and Isle of Wight Bays) than in the two southern bays (Chincoteague or Sinepuxent Bays). For the seine survey, effort-adjusted diversity indices were significantly lower for Chincoteague Bay than for the other three bays. Higher relative abundances were observed in the northern bays than in the southern bays. The trawl survey exhibited the lowest catch-per-site in Sinepuxent Bay and the highest in Assawoman Bay. The seine survey had the lowest catch-per-site in Chincoteague Bay while the other three embayments were of similar magnitude. There was clear seasonality in assemblage structure with peak abundance and diversity in the summer compared to other seasons. Blue crabs in particular showed a c. 2-fold decline in relative abundance from early summer to fall, which is likely attributable to harvest removals (i.e., an exploitation rate of c. 50%). Seagrass coverage, although increasing over the course of the 10 year survey, did not have obvious effects on species diversity and abundance across or within the embayments, although it did have positive associations with two important species: bay anchovy and summer flounder Pavalich thys dentatus. Atlantic menhaden were most dominant in Assawoman Bay, which could be related to higher primary production typically observed in this Bay in comparison to the other three. (PDF contains 99 pages)

Untersuchungen zu biologischen Schadstoffeffekten bei Nordseefischen: Langzeitdaten zum Auftreten von Lebertumoren bei der Kliesche (Limanda limanda)

Data are presented on the spatial distribution and long-term temporal trends in the occurrence of neoplastic liver lesions of North Sea dab (Limanda limanda) in the period 1988 to 2001, obtained in the framework of the regular fish disease monitoring programme carried out by the German Federal Research Centre for Fishery. Highest prevalences consistently recorded in the first part of the period occurred in the German Bight, at the Dogger Bank and at sampling sites off Humber and Wash. In contrast, stations in the northern North Sea (e.g. in the Firth of Forth area) were always characterised by low prevalences. Particularly during the first years of observation, a clear and general decrease in prevalence could be observed, that was most pronounced in the hot spot areas German Bight and Dogger Bank compared to the Firth of Forth. Current data reveal that, due to the decrease, spatial differences between sampling sites are now much less obvious than at the beginning of the studies. Limited chemical data available suggest that the temporal decrease in prevalence of liver tumours and their precursor stages generally correspond with the decrease in organic contaminants in dab livers as well as in water and sediments. However, the spatial variation in prevalence recorded can not entirely be explained by contaminant levels. For instance, the prevalence was continuously low in the Firth of Forth area wheras the contaminant levels in dab were comparatively high. The opposite feature was observed at the Dogger Bank. Future studies will therefore address the role of other host- and site-specific factors potentially involved in the aetiology of the disease.

Influence of Humidity on Fiber Bragg Grating Sensors

We demonstrate the influence of the relative humidity (RH) on the wavelength of fiber Bragg grating sensors (FBGS), performing tests with five FBGS at different humidity and temperature conditions. These tests were performed in a climate chamber whose RH changes according to a scheduled profile from 30% to 90%, in steps of 10%. These profiles were repeated for a wide range of temperatures from to , in steps of . Two different types of instrumentation methods have been tested, spot welding and epoxy bonding, in two different materials, steel and carbon fiber reinforced polymer (CFRP). We discuss the results for each type of sensor and instrumentation method by analyzing the linearity of the Bragg wavelength with RH and temperature.

Ortsbezogene Informationen in Internet-Datenbanken - das Beispiel "Baltic SeaWeb"

Whoever in future will need information about a location or an area, either literature, measurement data, photos or administrative information, might only click on that spot on a screen map in the internet. A search programme started thereby will offer all available information in databanks. A step forward to such a solution, to the retrieval of location related literature and measurement data from different kinds of databanks, is presented by the project “Baltic Sea Web” (http://www.baltic.vtt.fi/ demonstrator/index.html). The basic idea was to make the available information about a certain location accessible via a link of their geographical coordinates, longitude and latitude, to a map in a web browser

Laser Guiding in the Randomicity of Discrete Surface Strengthening by Arc Discharge

Several discharge areas by laser-guided discharge (LGD) were compared with those by common arc discharge. The randomicity of discharge areas by common arc discharge was controlled by laser guiding on two scales: large scale (the spacing of the discharge areas) and small scale (the inside of the discharge area). The position of the discharge area overlapped completely with a laser focus; therefore, the distribution and surface shape of the discharge areas were controlled. The stochastic movement of anode spot in the discharge area was controlled by laser guiding. As such, the repetitive melting and solidifying of microstructures in the discharge area was constrained. The tempered microstruc- tures in the discharge area were voided, the utilization efficiency of input energy was improved, and the strengthened depth of the discharge areas was increased. The regularity of cross-sectional shape of the discharge area was also improved. The hardness of microstructures in both discharge areas is greater than that of the base material. The highest level of hardness of microstructures in both discharge areas measures above 1000 HV. In summary, the hardness ofmicrostructures in the discharge area by LGD is larger and more discrete than that by common arc discharge.

Fluorescence optofluidic microscopy and fluorescence microscopy based on the Talbot effect

Light microscopy has been one of the most common tools in biological research, because of its high resolution and non-invasive nature of the light. Due to its high sensitivity and specificity, fluorescence is one of the most important readout modes of light microscopy. This thesis presents two new fluorescence microscopic imaging techniques: fluorescence optofluidic microscopy and fluorescent Talbot microscopy. The designs of the two systems are fundamentally different from conventional microscopy, which makes compact and portable devices possible. The components of the devices are suitable for mass-production, making the microscopic imaging system more affordable for biological research and clinical diagnostics.

Fluorescence optofluidic microscopy (FOFM) is capable of imaging fluorescent samples in fluid media. The FOFM employs an array of Fresnel zone plates (FZP) to generate an array of focused light spots within a microfluidic channel. As a sample flows through the channel and across the array of focused light spots, a filter-coated CMOS sensor collects the fluorescence emissions. The collected data can then be processed to render a fluorescence microscopic image. The resolution, which is determined by the focused light spot size, is experimentally measured to be 0.65 μm.

Fluorescence Talbot microscopy (FTM) is a fluorescence chip-scale microscopy technique that enables large field-of-view (FOV) and high-resolution imaging. The FTM method utilizes the Talbot effect to project a grid of focused excitation light spots onto the sample. The sample is placed on a filter-coated CMOS sensor chip. The fluorescence emissions associated with each focal spot are collected by the sensor chip and are composed into a sparsely sampled fluorescence image. By raster scanning the Talbot focal spot grid across the sample and collecting a sequence of sparse images, a filled-in high-resolution fluorescence image can be reconstructed. In contrast to a conventional microscope, a collection efficiency, resolution, and FOV are not tied to each other for this technique. The FOV of FTM is directly scalable. Our FTM prototype has demonstrated a resolution of 1.2 μm, and the collection efficiency equivalent to a conventional microscope objective with a 0.70 N.A. The FOV is 3.9 mm × 3.5 mm, which is 100 times larger than that of a 20X/0.40 N.A. conventional microscope objective. Due to its large FOV, high collection efficiency, compactness, and its potential for integration with other on-chip devices, FTM is suitable for diverse applications, such as point-of-care diagnostics, large-scale functional screens, and long-term automated imaging.

Energetic protons emitted from coulomb explosion dynamics of large-sized hydrogen clusters driven by an ultrashort intense laser pulse

Protons with very high kinetic energy of about 10keV and the saturation effect of proton energy for laser intensity have been observed in the interaction of an ultrashort intense laser pulse with large-sized hydrogen clusters. Including the cluster-size distribution as well as the laser-intensity distribution on the focus spot, the theoretical calculations based on a simplified Coulomb explosion model have been compared with our experimental measurements, which are in good agreement with each other.

Southeast White Oak River shellfish restoration project

The 42-mile-long White Oak River is one of the last relatively unblemished watery jewels of the N.C. coast. The predominantly black water river meanders through Jones, Carteret and Onslow counties along the central N.C. coast, gradually widening as it flows past Swansboro and into the Atlantic Ocean. It drains almost 12,000 acres of estuaries -- saltwater marshes lined with cordgrass, narrow and impenetrable hardwood swamps and rare stands of red cedar that are flooded with wind tides. The lower portion of the river was so renowned for fat oysters and clams that in times past competing watermen came to blows over its bounty at places that now bear names like Battleground Rock. The lower river is also a designated primary nursery area for such commercially important species as shrimp, spot, Atlantic croaker, blue crabs, weakfish and southern flounder. But the river has been discovered. The permanent population along the lower White Oak increased by almost a third since 1990, and the amount of developed land increased 82 percent during the same period. With the growth have come bacteria. Since the late 1990s, much of the lower White Oak has been added to North Carolina’s list of impaired waters because of bacterial pollution. Forty-two percent of the rivers’ oyster and clam beds are permanently closed to shellfishing because of high bacteria levels. Fully two-thirds of the river’s shellfish beds are now permanently off limits or close temporarily after a moderate rain. State monitoring indicates that increased runoff from urbanization is the probable cause of the bacterial pollution. (PDF contains 4 pages)

飞秒激光对氟化镁烧蚀机理研究

用扫描电镜（SEM）研究了氟化镁在800nm超短脉冲激光作用下的单枪表面烧蚀形貌．根据烧蚀斑面积与激光脉冲能量间的对数关系，测得烧蚀阈值与激光脉宽的关系曲线（55—750fs）．计算了导带电子的双光子吸收，改进了多速率方程模型．很好地解释了实验结果．

Nonlinear laser focusing using a conical guide and generation of energetic ions

Using conventional methods, a laser pulse can be focused down to around 6-8 mu m, but further reduction of the spot size has proven to be difficult. Here it is shown by particle-in-cell simulation that with a hollow cone an intense laser pulse can be reduced to a tiny, highly localized, spot of around 1 mu m radius, accompanied by much enhanced light intensity. The pulse shaping and focusing effect is due to a nonlinear laser-plasma interaction on the inner surface of the cone. When a thin foil is attached to the tip of the cone, the cone-focused light pulse compresses and accelerates the ions in its path and can punch through the thin target, creating highly localized energetic ion bunches of high density.

Red-shift conical emission by femtosecond pulses at low input power

Red-shift conical emission (CE) is observed by femtosecond laser pulse propagating in BK7 at a low input power (compared to those input powers for generation of blue-shift CE). With the increasing input power the blue-shift CE begins to appear whereas the red-shift CE ring (902 nm in our experiment) disappears accompanied by the augment of the central white spot size synchronously. The disappearing of red-shift CE in our experiment is explained such that the increase of axial intensity is much higher than that of ring emission and the augment of the central white spot size with the increasing input laser power.

Reduced deep-tissue image degradation in three-dimensional multiphoton microscopy with concentric two-color two-photon fluorescence excitation

We theoretically demonstrate that enhanced penetration depth in three-dimensional multiphoton microscopy can be achieved using concentric two-color two-photon (C2C2P) fluorescence excitation in which the two excitation beams are separated in space before reaching their common focal spot. Monte Carlo simulation shows that, in comparison with the one-color two-photon excitation scheme, the C2C2P fluorescence microscopy provides a significantly greater penetration depth for imaging into a highly scattering medium. (C) 2008 Optical Society of America.

激光光束实时监测与自动准直系统设计

设计了一个激光光斑实时监测与光路自动准直装置,能够实时监测激光光斑并自动准直激光输出方向。基于透镜成像原理,使用CCD探测器获得光斑的二维成像,并根据两点确定一条直线原理和使用压电陶瓷电动调整架实现光路自动准直;监测控制程序采用虚拟仪器开发软件Lab View编写,可以实时监测激光光斑模式与光斑位置抖动情况,并进行反馈控制。经测试,设计装置的调整精度达0.5μrad,反馈控制频率约1 Hz,完全可降低或消除抖动周期在1 s以上的光斑飘移。

Investigation of the influence of the aberration induced by a plane interface on STED microscopy

The structure of the inhibition patterns is important to the stimulated emission depletion (STED) microscopy. Usually, Laguerre-Gaussian (LG) beam and the central zero-intensity patterns created by inserting phase masks in Gaussian beams are used as the erase beam in STED microscopy. Aberration is generated when focusing beams through an interface between the media of the mismatched refractive indices. By use of the vectorial integral, the effects of such aberration on the shape of depletion patterns and the size of fluorescence emission spot in the STED microscopy are studied. Results are presented as a comparison between the aberration-free case and the aberrated cases. (C) 2009 Optical Society of America