Risk Based Post Closure Care Analysis for Florida Landfills

Subtitle D of the Resource Conservation and Recovery Act (RCRA) requires a post closure period of 30 years for non hazardous wastes in landfills. Post closure care (PCC) activities under Subtitle D include leachate collection and treatment, groundwater monitoring, inspection and maintenance of the final cover, and monitoring to ensure that landfill gas does not migrate off site or into on site buildings. The decision to reduce PCC duration requires exploration of a performance based methodology to Florida landfills. PCC should be based on whether the landfill is a threat to human health or the environment. Historically no risk based procedure has been available to establish an early end to PCC. Landfill stability depends on a number of factors that include variables that relate to operations both before and after the closure of a landfill cell. Therefore, PCC decisions should be based on location specific factors, operational factors, design factors, post closure performance, end use, and risk analysis. The question of appropriate PCC period for Florida’s landfills requires in depth case studies focusing on the analysis of the performance data from closed landfills in Florida. Based on data availability, Davie Landfill was identified as case study site for a case by case analysis of landfill stability. The performance based PCC decision system developed by Geosyntec Consultants was used for the assessment of site conditions to project PCC needs. The available data for leachate and gas quantity and quality, ground water quality, and cap conditions were evaluated. The quality and quantity data for leachate and gas were analyzed to project the levels of pollutants in leachate and groundwater in reference to maximum contaminant level (MCL). In addition, the projected amount of gas quantity was estimated. A set of contaminants (including metals and organics) were identified as contaminants detected in groundwater for health risk assessment. These contaminants were selected based on their detection frequency and levels in leachate and ground water; and their historical and projected trends. During the evaluations a range of discrepancies and problems that related to the collection and documentation were encountered and possible solutions made. Based on the results of PCC performance integrated with risk assessment, projection of future PCC monitoring needs and sustainable waste management options were identified. According to these results, landfill gas monitoring can be terminated, leachate and groundwater monitoring for parameters above MCL and surveying of the cap integrity should be continued. The parameters which cause longer monitoring periods can be eliminated for the future sustainable landfills. As a conclusion, 30 year PCC period can be reduced for some of the landfill components based on their potential impacts to human health and environment (HH&E).

Process inventory and pollution prevention overview for the citrus industry

Florida citrus represents approximately 70 percent of the industry production in the United States; therefore, any associated agricultural and industrial contamination is of concern and a focus of attention. The use of synthetic organic chemicals has become a farmer's necessity in order to supply consumers with high quality products, free of pest damage. However, industrial citrus wastes and chemical residual levels worry not only government agencies but also consumers since they indicate a serious habitat risk. This study assesses citrus industrial processes and the paths that chemical substances follow from the time the citrus seed is planted until consumers get a final product as either fresh fruit or processed product. The study is built on information from United States Environmental Protection Agency (US EPA) manuals, Dade County Environmental Resources Management (DERM) inspection records, United States Food and Drug Administration (US FDA) regulations, Florida standards, journal publications, and research reports. Pollution prevention (P2 or prevention-of-pollution) alternatives are identified; alternatives are proposed, evaluated, and included. Strategies are described and pollution prevention opportunities proposed to minimize citrus wastes generation, chemical residuals in products, their environmental impact and health risk aspects while maximizing product quality.

Utilização do resíduo grosso do beneficiamento da scheelita em aplicações rodoviárias

Mining is an activity of great economic and social value, assisting in the development of the country. However, it can be extremely harmful to the environment if no proper waste management study exists as mitigation measure its effects. Sample some of these harmful effects are pollution: water, through the seepage of waste into the groundwater; soil; of fauna and flora; sound (due to the noise of machines); visual from the residue stored in the open, changing the local landscape; and air. One way to mitigate environmental impacts caused by mining is the proper management of their waste through their use on highways. To that end, this paper proposes to give an appropriate destination to grit coming from the beneficiation of scheelite, due to mining activity from mining group Tomaz Salustino in Brejuí mine, located in the city of Currais Novos in the state of Rio Grande do Norte. This work was developed in four stages. The first comprised the chemical and mineralogical tests, DRX and FRX in which they sought to discover the composition of the material studied. The next step involved the physical characteristics of the waste by means of specific tests and grinding the solid mass, LL and LP. The third stage included the specific tests applied to the pavement, with the compaction test and test Index Support California. Finally, the fourth stage was the mechanical characterization, represented by direct shear tests, both in the flooded condition and not in flooded condition. The technical feasibility of using the modified energie compacted in layers of subbase power has been verified. In normal and intermediate energies is feasible to use less noble as layers as the subgrade. The incorporation of the waste in layers of road pavements provide an alternative to conventionally used in paving aggregates, providing a proper disposal of tailings from scheelite, as well as environmental preservation

Inclusão social de catadores de materiais recicláveis: estudo da política nacional de resíduos sólidos e da efetivação do trabalho decente em Natal/RN

The integrated management of municipal solid waste in Brazil is held legally responsible by the city council administration. This is done since the year 2010 with the publication of the National Solid Waste Policy term. According to the policy and law, each city must encourage the implementation of selective collection and the participation of waste picker´s entities aiming social inclusion. However, these actions haven’t yet reached its legal aims. These workers are considered regarding collection actions but are stripped of certain basic labor rights not in conformation with the Decent Work concept. This type of work, according to International Labour Organization, must be seen as work that is properly paid for and must be done regarding conditions of freedom, equity, security and able to provide workers with a dignified life conditions. Thus, this work aims to investigate the implementation process regarding the Solid Waste National Policy in Natal-Rio Grande do Norte in Brazil. This is done considering socio-productive insertion of recyclable material collectors. The research is substantiated by a qualitative approach as well as documental and bibliographical research. A field research considering the cooperatives as well “in locco" observation and semi-structured interviews were carried out between the time span of 2013 and 2014. In order to investigate decent daily working conditions the research emphasized municipal management actions in Natal towards social inclusion that aim to reflect on the progress and difficulties experimented. It is seen that even when these cooperatives receive government support there are still important struggles that need to be overcome. The worker´s tasks are risky, the work environment in not safe or is adequate in terms of health issues. There is the stigma of it being considered an occupational task, the low individual income distancing the activity regarding parameters of the Green Employment and Decent Work concept. On the other hand, the survey showed potential as the relentless pursuit on behalf of the cooperatives that still search better work condition improvement.

Independent Projects Environmental Studies 2001: Environmental Auditing Strategy for Sir Wilfred Grenfell College

Overconsumption has caused environmental degradation, while creating a dependence on convenience commodities. It is the disposal of solid waste which will prove problematic in the future with growing world populations requiring resources and the use of the land. Universities, as institutions of higher learning, have an opportunity to reduce their environmental impact through its daily operations. Adopting an environmental management system and creating an environmental policy is the means by which these institutions become sustainable campuses. Stewardship policies are developed for universities, such as Sir Wilfred Grenfell College by analyzing current consumptive practices of the students, Faculty, and staff at the institution, often by way of an environmental audit

The UK waste input–output table: Linking waste generation to the UK economy

Peer reviewed

The UK waste input–output table : Linking waste generation to the UK economy

Peer reviewed

Experimental data from column and batch samples

The presented thesis was written in the frame of a project called 'seepage water prognosis'. It was funded by the Federal Ministry for Education and Science (BMBF). 41 German institutions among them research institutes of universities, public authorities and engineering companies were financed for three years respectively. The aim was to work out the scientific basis that is needed to carry out a seepage water prognosis (Oberacker und Eberle, 2002). According to the Federal German Soil Protection Act (Federal Bulletin, 1998) a seepage water prognosis is required in order to avoid future soil impacts from the application of recycling products. The participants focused on the development of either methods to determine the source strength of the materials investigated, which is defined as the total mass flow caused by natural leaching or on models to predict the contaminants transport through the underlying soil. Annual meetings of all participants as well as separate meetings of the two subprojects were held. The department of Geosciences in Bremen participated with two subprojects. The aim of the subproject that resulted in this thesis was the development of easily applicable, valid, and generally accepted laboratory methods for the determination of the source strength. In the scope of the second subproject my colleague Veith Becker developed a computer model for the transport prognosis with the source strength as the main input parameter.

Waste Not, Want Not: Managing Perishables in Small and Medium Retail Enterprises

Purpose of this paper:
Recent literature indicates that around one third of perishable products finish as waste (Mena et al., 2014): 60% of this waste can be classified as avoidable (EC, 2010) suggesting logistics and operational inefficiencies along the supply chain. In developed countries perishable products are predominantly wasted in wholesale and retail (Gustavsson et al., 2011) due to customer demand uncertainty the errors and delays in the supply chain (Fernie and Sparks, 2014). While research on logistics of large retail supply chains is well documented, research on retail small and medium enterprises’ (SMEs) capabilities to prevent and manage waste of perishable products is in its infancy (c.f. Ellegaard, 2008) and needs further exploration. In our study, we investigate the retail logistics practice of small food retailers, the factors that contribute to perishable products waste and the barriers and opportunities of SMEs in retail logistics to preserve product quality and participate in reverse logistics flows.

Design/methodology/approach:
As research on waste of perishable products for SMEs is scattered, we focus on identifying key variables that contribute to the creation of avoidable waste. Secondly we identify patterns of waste creation at the retail level and its possibilities for value added recovery. We use explorative case studies (Eisenhardt, 1989) and compare four SMEs and one large retailer that operate in a developed market. To get insights into specificities of SMEs that affect retail logistics practice, we select two types of food retailers: specialised (e.g. greengrocers and bakers) and general (e.g. convenience store that sells perishable products as a part of the assortment)

Findings:
Our preliminary findings indicate that there is a difference between large retailers and SME retailers in factors that contribute to the waste creation, as well as opportunities for value added recovery of products. While more factors appear to affect waste creation and management at large retailers, a small number of specific factors appears to affect SMEs. Similarly, large retailers utilise a range of practices to reduce risks of product perishability and short shelf life, manage demand, and manage reverse logistics practices. Retail SMEs on the other hand have limited options to address waste creation and value added recovery. However, our findings show that specialist SMEs could successfully minimize waste and even create possibilities for value added recovery of perishable products. Data indicates that business orientation of the SME, the buyersupplier relationship, and an extent of adoption of lean principles in retail coupled with SME resources, product specific regulations and support from local authorities for waste management or partnerships with other organizations determine extent of successful preservation of a product quality and value added recovery.

Value:
Our contribution to the SCM academic literature is threefold: first, we identify major factors that contribute to the generation waste of perishable products in retail environment; second, we identify possibilities for value added recovery for perishable products and third, we present opportunities and challenges for SME retailers to manage or participate in activities of value added recovery. Our findings contribute to theory by filling a gap in the literature that considers product quality preservation and value added recovery in the context of retail logistics and SMEs.

Research limitations/implications:
Our findings are limited to insights from five case studies of retail companies that operate within a developed market. To improve on generalisability, we intend to increase the number of cases and include data obtained from the suppliers and organizations involved in reverse logistics flows (e.g. local authorities, charities, etc.).

Practical implications:
With this paper, we contribute to the improvement of retail logistics and operations in SMEs which constitute over 99% of business activities in UK (Rhodes, 2015). Our findings will help retail managers and owners to better understand the possibilities for value added recovery, investigate a range of logistics and retail strategies suitable for the specificities of SME environment and, ultimately, improve their profitability and sustainability.

Electrolytic cells for plastic waste recycling

The current project assesses potential molten alloy anodes for Solid Oxide Fuel Cells (SOFC) running on solid waste. A detailed phase diagram study was performed to locate probable anode systems. The molten metal oxide system PbO-Sb2O3 was selected as a possible molten alloy anode for this application. A detailed vapour pressure study of this system was performed. Several cells were fabricated to experimentally assess the electrochemical properties of this system. The work reveals several unexpected limiting features such as the incompatibility between the platinum and the chosen alloy. A second cell was built, this time using rhenium wires instead, preventing such reaction. However, the rhenium wire sublimes under oxidizing conditions (air) and the sealing glass and the chosen alloy system react with each other under long term use. Considering all these issues, a third cell design was conceived, surpassing some obstacles and providing some initial information regarding the electrochemical behaviour. The current project shows that many parameters need to be taken into account to ensure materials compatibility. For the PbOSb2O3 system, the high volatility of Sb2O3 was a serious limitation that can only be addressed through the application of new contact wires or sealing materials and conditions. Nonetheless, the project highlights several other potential systems that can be considered, such as Pb11Ge3O17, Pb3GeO5, Pb5Ge3O11, Bi2CuO4, Bi2PdO4, Bi12GeO20.

Perfil e evolução das pesquisas brasileiras em gestão dos resíduos de equipamentos eletroeletrônicos

O objetivo deste artigo é analisar o perfil e a evolução das pesquisas brasileiras sobre a Gestão dos Resíduos de Equipamentos Eletroeletrônicos (REEE) nos principais periódicos e congressos brasileiros da área da Administração. Os termos “lixo eletrônico”, “resíduos eletrônicos”, “lixo informático”, “resíduo de equipamentos eletrônicos”, “resíduos de equipamentos eletroeletrônicos”, “e-waste” e “e-lixo”, foram pesquisados nas bases de dados de 205 revistas (Qualis CAPES A1, A2, B1 e B2) e em quatro congressos nacionais (Engema, Enanpad, Ecoinovar e Simpoi). A leitura dos 30 artigos selecionados privilegiaram a identificação de um conjunto de variáveis, tais como: ano e local da publicação do trabalho, visualização do perfil, vínculo institucional e titulação dos autores, a fundamentação teórica, a abordagem metodológica e os tipos de REEE pesquisados. Os resultados apontam que a publicação é escassa, porém a média de publicações aumentou após o ano de 2010 sendo um dos fatores que podem ter influenciado neste crescimento a aprovação da Política Nacional de Resíduos Sólidos, ocorrida neste mesmo ano. As pesquisas nacionais estão analisando predominantemente resíduos de equipamentos informáticos. Constatamos que inexistem pesquisas sobre REEE nas regiões norte e centro-oeste. Do ponto de vista metodológico observa-se predominância de estudos de caso descritivos e de abordagem qualitativa.

Prevalence of Aspergillus fumigatus complex in waste sorting and incineration plants: an occupational threat

Aspergillus fumigatus is one of the major ubiquitous saprophytic fungi and it is considered one of the fungal species with higher clinical relevance. This study aimed at characterising the prevalence of A. fumigatus complex in one waste-sorting plant and also in one incineration plant. Conventional and molecular methodologies were applied in order to detect its presence. Aspergillus fumigatus complex was the second most frequently found in the air from the waste-sorting plant (16.0%) and from the incineration plant (18.0%). Regarding surfaces, it ranked the third species most frequently found in the waste-sorting plant (13.8%) and the second in the incineration plant (22.3%). In the waste-sorting plant, it was possible to amplify by qPCR DNA from the A. fumigatus complex in all culture-positive sampling sites plus one other sampling site that was negative by culture analysis. Considering the observed fungal load, it is recommended to apply preventive and protective measures in order to avoid or minimise worker's exposure.