Effects on the shallow aquifers by CO2 leakages in a tertiary basin (province of Murcia, Spain)

Geological storage of CO2 is nowadays internationally considered as the most effective method for greenhouse gas emission mitigation, in order to minimize its effects on the global climatology. One of the main options is to store CO2 in deep saline aquifers at more than 800m depth, because it reaches its supercritical state. Study of the CO2 natural accumulations as natural analogues of an artificial CO2 storage is very useful in order to understand the CO2 long term behaviour and thus to predict its possible impact on the surficial environment and life. Therefore the main objective of this work is to detect the affection of the CO2 leakages from a deep saline aquifer on the shallow aquifers, all of them located in the Gañuelas-Mazarrón Tertiary basin (Province of Murcia, Spain). This CO2 storage and leakage natural system can be analogous to an artificial CO2 storage with leakage phenomena. In order to reach these objectives, groundwaters from different aquifers in the site have been sampled and analysed for major elements, free and dissolved gases and stable isotopes, particularly ∂ 13 C and 3 He/ 4 He. The results obtained allow to conclude that this natural system is an interesting example of natural analogue for an artificial CO2 storage affected by leakage processes because the shallow fresh aquifers in the site are polluted by CO2 from the deep saline aquifer as a consequence of an intensive over-exploitation of these freshwater aquifers

Integrated economic-hydrologic analysis of policy responses

Water is a vital resource, but also a critical limiting factor for economic and social development in many parts of the world. The recent rapid growth in human population and water use for social and economic development is increasing the pressure on water resources and the environment, as well as leading to growing conflicts among competing water use sectors (agriculture, urban, tourism, industry) and regions (Gleick et al., 2009; World Bank, 2006). In Spain, as in many other arid and semi-arid regions affected by drought and wide climate variability, irrigated agriculture is responsible for most consumptive water use and plays an important role in sustaining rural livelihoods (Varela-Ortega, 2007). Historically, the evolution of irrigation has been based on publicly-funded irrigation development plans that promoted economic growth and improved the socio-economic conditions of rural farmers in agrarian Spain, but increased environmental damage and led to excessive and inefficient exploitation of water resources (Garrido and Llamas, 2010; Varela-Ortega et al., 2010). Currently, water policies in Spain focus on rehabilitating and improving the efficiency of irrigation systems, and are moving from technocratic towards integrated water management strategies driven by the European Union (EU) Water Framework Directive (WFD).

Combining series elastic actuation and magneto-rheological damping for the control of agile locomotion

All-terrain robot locomotion is an active topic of research. Search and rescue maneuvers and exploratory missions could benefit from robots with the abilities of real animals. However, technological barriers exist to ultimately achieving the actuation system, which is able to meet the exigent requirements of these robots. This paper describes the locomotioncontrol of a leg prototype, designed and developed to make a quadruped walk dynamically while exhibiting compliant interaction with the environment. The actuation system of the leg is based on the hybrid use of series elasticity and magneto-rheological dampers, which provide variable compliance for natural-looking motion and improved interaction with the ground. The locomotioncontrol architecture has been proposed to exploit natural leg dynamics in order to improve energy efficiency. Results show that the controller achieves a significant reduction in energy consumption during the leg swing phase thanks to the exploitation of inherent leg dynamics. Added to this, experiments with the real leg prototype show that the combined use of series elasticity and magneto-rheologicaldamping at the knee provide a 20 % reduction in the energy wasted in braking the knee during its extension in the leg stance phase.

Automatic compile-time parallelization of logic programs for restricted, goal-level, independent and-parallelism.

A framework for the automatic parallelization of (constraint) logic programs is proposed and proved correct. Intuitively, the parallelization process replaces conjunctions of literals with parallel expressions. Such expressions trigger at run-time the exploitation of restricted, goal-level, independent and-parallelism. The parallelization process performs two steps. The first one builds a conditional dependency graph (which can be implified using compile-time analysis information), while the second transforms the resulting graph into linear conditional expressions, the parallel expressions of the &-Prolog language. Several heuristic algorithms for the latter ("annotation") process are proposed and proved correct. Algorithms are also given which determine if there is any loss of parallelism in the linearization process with respect to a proposed notion of maximal parallelism. Finally, a system is presented which implements the proposed approach. The performance of the different annotation algorithms is compared experimentally in this system by studying the time spent in parallelization and the effectiveness of the results in terms of speedups.

Research on intermediate band solar cells and development of experimental techniques for their characterization under concentrated illumination

Abstract This work is a contribution to the research and development of the intermediate band solar cell (IBSC), a high efficiency photovoltaic concept that features the advantages of both low and high bandgap solar cells. The resemblance with a low bandgap solar cell comes from the fact that the IBSC hosts an electronic energy band -the intermediate band (IB)- within the semiconductor bandgap. This IB allows the collection of sub-bandgap energy photons by means of two-step photon absorption processes, from the valence band (VB) to the IB and from there to the conduction band (CB). The exploitation of these low energy photons implies a more efficient use of the solar spectrum. The resemblance of the IBSC with a high bandgap solar cell is related to the preservation of the voltage: the open-circuit voltage (VOC) of an IBSC is not limited by any of the sub-bandgaps (involving the IB), but only by the fundamental bandgap (defined from the VB to the CB). Nevertheless, the presence of the IB allows new paths for electronic recombination and the performance of the IBSC is degraded at 1 sun operation conditions. A theoretical argument is presented regarding the need for the use of concentrated illumination in order to circumvent the degradation of the voltage derived from the increase in the recombi¬nation. This theory is supported by the experimental verification carried out with our novel characterization technique consisting of the acquisition of photogenerated current (IL)-VOC pairs under low temperature and concentrated light. Besides, at this stage of the IBSC research, several new IB materials are being engineered and our novel character¬ization tool can be very useful to provide feedback on their capability to perform as real IBSCs, verifying or disregarding the fulfillment of the “voltage preservation” principle. An analytical model has also been developed to assess the potential of quantum-dot (QD)-IBSCs. It is based on the calculation of band alignment of III-V alloyed heterojunc-tions, the estimation of the confined energy levels in a QD and the calculation of the de¬tailed balance efficiency. Several potentially useful QD materials have been identified, such as InAs/AlxGa1-xAs, InAs/GaxIn1-xP, InAs1-yNy/AlAsxSb1-x or InAs1-zNz/Alx[GayIn1-y]1-xP. Finally, a model for the analysis of the series resistance of a concentrator solar cell has also been developed to design and fabricate IBSCs adapted to 1,000 suns. Resumen Este trabajo contribuye a la investigación y al desarrollo de la célula solar de banda intermedia (IBSC), un concepto fotovoltaico de alta eficiencia que auna las ventajas de una célula solar de bajo y de alto gap. La IBSC se parece a una célula solar de bajo gap (o banda prohibida) en que la IBSC alberga una banda de energía -la banda intermedia (IB)-en el seno de la banda prohibida. Esta IB permite colectar fotones de energía inferior a la banda prohibida por medio de procesos de absorción de fotones en dos pasos, de la banda de valencia (VB) a la IB y de allí a la banda de conducción (CB). El aprovechamiento de estos fotones de baja energía conlleva un empleo más eficiente del espectro solar. La semejanza antre la IBSC y una célula solar de alto gap está relacionada con la preservación del voltaje: la tensión de circuito abierto (Vbc) de una IBSC no está limitada por ninguna de las fracciones en las que la IB divide a la banda prohibida, sino que está únicamente limitada por el ancho de banda fundamental del semiconductor (definido entre VB y CB). No obstante, la presencia de la IB posibilita nuevos caminos de recombinación electrónica, lo cual degrada el rendimiento de la IBSC a 1 sol. Este trabajo argumenta de forma teórica la necesidad de emplear luz concentrada para evitar compensar el aumento de la recom¬binación de la IBSC y evitar la degradación del voltage. Lo anterior se ha verificado experimentalmente por medio de nuestra novedosa técnica de caracterización consistente en la adquisicin de pares de corriente fotogenerada (IL)-VOG en concentración y a baja temperatura. En esta etapa de la investigación, se están desarrollando nuevos materiales de IB y nuestra herramienta de caracterizacin está siendo empleada para realimentar el proceso de fabricación, comprobando si los materiales tienen capacidad para operar como verdaderas IBSCs por medio de la verificación del principio de preservación del voltaje. También se ha desarrollado un modelo analítico para evaluar el potencial de IBSCs de puntos cuánticos. Dicho modelo está basado en el cálculo del alineamiento de bandas de energía en heterouniones de aleaciones de materiales III-V, en la estimación de la energía de los niveles confinados en un QD y en el cálculo de la eficiencia de balance detallado. Este modelo ha permitido identificar varios materiales de QDs potencialmente útiles como InAs/AlxGai_xAs, InAs/GaxIni_xP, InAsi_yNy/AlAsxSbi_x ó InAsi_zNz/Alx[GayIni_y]i_xP. Finalmente, también se ha desarrollado un modelado teórico para el análisis de la resistencia serie de una célula solar de concentración. Gracias a dicho modelo se han diseñado y fabricado IBSCs adaptadas a 1.000 soles.

Metodología para medir beneficios de la ciudad Puerto de Valparaíso Chile, con relación a la actividad marítima portuaria

La presente tesis propone una metodología para medir variables de impacto socio económico en la ciudad Puerto de Valparaíso, como una alternativa que permite evaluar la asignación del uso y explotación del borde costero. La ciudad de Valparaíso se formó al alero de la actividad marítima portuaria, en sus comienzos esta actividad fue el motor de desarrollo económico de la ciudad, sus habitantes mantenían una alta dependencia de ésta actividad, formando una identidad y cultura portuaria. Con la decadencia de la actividad portuaria, producto principalmente a la construcción del canal de Panamá y a la modernización de los buques de transporte aumentando su distancia franqueable1, la ciudad fue dejando su dependencia de esta actividad. Hoy en día casi la totalidad del borde costero de la ciudad está asignado a las actividades portuarias con escasa participación laboral de los habitantes de la ciudad y una alta demanda urbana por el uso del borde costero. Por otra parte, la ciudad ha presentado en la última década altos niveles de cesantía, cuestionándose la verdadera utilidad de mantener un puerto en la ciudad. La investigación de la tesis permitió dimensionar la cantidad de firmas y actividades económicas que se desarrollaban en torno a la actividad marítima portuaria en la ciudad, cuantificando los empleos que éstas otorgaban a la ciudad, los niveles de remuneraciones, los tributos a la municipalidad de la ciudad, el aporte al comercio local, entre otros. Descubriéndose hallazgos que permiten reflexionar sobre la importancia del la actividad en el desarrollo económico actual y futuro de la ciudad. También los antecedentes obtenidos permiten contribuir a la evaluación de proyectos alternativos para el uso y explotación del borde costero. La metodología utilizada también puede ser adaptada para medir los beneficios de otras ciudades puertos en el mundo. Los resultados obtenidos fueron expuestos a las autoridades gubernamentales locales, presentados en seminarios y congresos nacionales e internacionales, como en la prensa local; los más destacados son: la actividad otorga 12.727 empleos directos e indirectos que corresponden al 12% de la fuerza laboral ocupada; la actividad representa el 19% del Producto Interno Bruto de la ciudad; la actividad aporta un 21% al presupuesto municipal por concepto de recaudación de tributos y representan un 11% del presupuesto total asignado al municipio por el Estado de Chile. El sector industrial marítimo-portuario de la ciudad sigue siendo la actividad industrial más relevante en la ciudad y demanda el desarrollo de una planificación estratégica que permita vincular la actividad turística de la ciudad vecina de Viña del Mar con la actividad portuaria de Valparaíso. Para lograr tal objetivo es necesario realizar cambios en los atributos de las operaciones portuarias que permitan ofrecer productos asociados al turismo. This thesis proposes a methodology to measure the socio economic variables in the port city of Valparaiso, as an alternative to evaluate the allocation of the usage and exploitation of the coastline. The city of Valparaiso was formed to advance the port maritime activity and in the beginning this activity was the engine of economic development of the city. Its inhabitants remained highly dependent on it and formed a port identity and culture. With the decline of port activity, mainly due to the construction of the Panama Canal and the modernization of the transport vessels increasing distances, the city lost its dependence on this activity. Today almost all of the coastline of the city is assigned to port activities with very little labor participation of the inhabitants of the city and a high demand for the use of urban waterfront. Moreover, the city has shown high levels of unemployment in the past decade, questioning the true value of maintaining a port in the city. The research of this thesis provides insights into the number of firms and economic activities that were developed around the port maritime activity in the city, quantifying the jobs they gave to the city, the levels of pay, taxes to the municipality of city and the contribution to local commerce, among others. The findings discovered allow reflexions on the importance of the activity in the current and future economic development of the city. The data obtained also allows a contribution of the evaluation of alternative projects for the use and exploitation of the coastline. The methodology can also be adapted to measure the benefits of other port cities in the world. The results were presented to local government authorities, at seminars and national and international conferences, and in the local press. The most important finding are: the activity maritime port activity provides 12,727 direct and indirect jobs that are 12% of the employed labor force; activity represents which is 19% of the GDP of the city, the activity contributes 21% to the municipal budget by way of the collection of taxes and represents 11% of the total budget allocated to the municipality by the Republic of Chile. The industrial maritime port sector of the city remains the most important industrial activity in the city and demands the development of strategic planning to link the tourism in the neighboring city of Viña del Mar and to the Valparaiso port activity. To achieve this goal it is necessary to make changes to the attributes of port operations that allow the offering of products associated with tourism.

Implementation of Boundary Elements in Microcomputers

In this chapter we are going to develop some aspects of the implementation of the boundary element method (BEM)in microcomputers. At the moment the BEM is established as a powerful tool for problem-solving and several codes have been developed and maintained on an industrial basis for large computers. It is also well known that one of the more attractive features of the BEM is the reduction of the discretization to the boundary of the domain under study. As drawbacks, we found the non-bandedness of the final matrix, wich is a full asymmetric one, and the computational difficulties related to obtaining the integrals which appear in the influence coefficients. Te reduction in dimensionality is crucial from the point of view of microcomputers, and we believe that it can be used to obtain competitive results against other domain methods. We shall discuss two applications in this chapter. The first one is related to plane linear elastostatic situations, and the second refers to plane potential problems. In the first case we shall present the classical isoparametric BEM approach, using linear elements to represent both the geometry and the variables. The second case shows how to implement a p-adaptive procedure using the BEM. This latter case has not been studied until recently, and we think that the future of the BEM will be related to its development and to the judicious exploitation of the graphics capabilities of modern micros. Some examples will be included to demonstrate the kind of results that can be expected and sections of printouts will show useful details of implementation. In order to broaden their applicability, these printouts have been prepared in Basic, although no doubt other languages may be more appropiate for effective implementation.

A random utility based multiregional input-output approach to estimate the impact of a new highway on the regional distribution of jobs

This paper addresses the economic impact assessment of the construction of a new road on the regional distribution of jobs. The paper summarizes different existing model approaches considered to assess economic impacts through a literature review. Afterwards, we present the development of a comprehensive approach for analyzing the interaction of new transport infrastructure and the economic impact through an integrated model. This model has been applied to the construction of the motorway A-40 in Spain (497 Km.) which runs across three regions without passing though Madrid City. This may in turn lead to the relocation of labor and capital due to the improvement of accessibility of markets or inputs. The result suggests the existence of direct and indirect effects in other regions derived from the improvement of the transportation infrastructure, and confirms the relevance of road freight transport in some regions. We found that the changes in regional employment are substantial for some regions (increasing or decreasing jobs), but a t the same time negligible in other regions. As a result,the approach provides broad guidance to national governments and other transport-related parties about the impacts of this transport policy.

A Knowledge-based Approach for Automatic Generation of Summaries of Behavior

Effective automatic summarization usually requires simulating human reasoning such as abstraction or relevance reasoning. In this paper we describe a solution for this type of reasoning in the particular case of surveillance of the behavior of a dynamic system using sensor data. The paper first presents the approach describing the required type of knowledge with a possible representation. This includes knowledge about the system structure, behavior, interpretation and saliency. Then, the paper shows the inference algorithm to produce a summarization tree based on the exploitation of the physical characteristics of the system. The paper illustrates how the method is used in the context of automatic generation of summaries of behavior in an application for basin surveillance in the presence of river floods.

Safety and operability of small fishing vessels: study of a series of stability-related accidents

The intact stability of five small Spanish fishing vessels with ages between 3 and 8 years old which sunk in stability related accidents between 2004 and 2007 is compared to the stability of the fishing vessels which were retired from service to build those. The seakeeping performance of both sets of vessels is also compared. The differences found between the results obtained by the two methods have been analyzed. The suitability of seakeeping methods to assess stability performance is discussed.

Urban sprawl and city compactness. A proposal for regional sustainability indicators. Case study of the towns of Alcorcon and Majadahonda (Comunidad de Madrid, Spain)

The main contribution of this research paper is to display a range of figures and values which could help urban planners to quantify the urban phenomenon of sprawl. In this way, after a rigorous analysis and comparison between a scattered urban fabric (Majadahonda) and a compact urban fabric (Alcorcón), several possible indexes are established and characterized in order to verify the main hypothesis: in what extent land consumption and exploitation of energy resources are higher in a scattered urban fabric than in a compact one.

The TRANSPLANTA collection of Arabidopsis lines: a resource for functional analysis of transcription factors based on their conditional over-expression

Transcription factors (TFs) are key regulators of gene expression in all organisms. In eukaryotes, TFs are often represented by functionally redundant members of large gene families. Overexpression might prove a means to unveil the biological functions of redundant TFs; however, constitutive overexpression of TFs frequently causes severe developmental defects, preventing their functional characterization. Conditional overexpression strategies help to overcome this problem. Here, we report on the TRANSPLANTA collection of Arabidopsis lines, each expressing one of 949 TFs under the control of a β–estradiol-inducible promoter. Thus far, 1636 independent homozygous lines, representing an average of 2.6 lines for every TF, have been produced for the inducible expression of 634 TFs. Along with a GUS-GFP reporter, randomly selected TRANSPLANTA lines were tested and confirmed for conditional transgene expression upon β–estradiol treatment. As a proof of concept for the exploitation of this resource, β–estradiol-induced proliferation of root hairs, dark-induced senescence, anthocyanin accumulation and dwarfism were observed in lines conditionally expressing full-length cDNAs encoding RHD6, WRKY22, MYB123/TT2 and MYB26, respectively, in agreement with previously reported phenotypes conferred by these TFs. Further screening performed with other TRANSPLANTA lines allowed the identification of TFs involved in different plant biological processes, illustrating that the collection is a powerful resource for the functional characterization of TFs. For instance, ANAC058 and a TINY/AP2 TF were identified as modulators of ABA-mediated germination potential, and RAP2.10/DEAR4 was identified as a regulator of cell death in the hypocotyl–root transition zone. Seeds of TRANSPLANTA lines have been deposited at the Nottingham Arabidopsis Stock Centre for further distribution.

Economics of Wheat in Egypt

Este estudio pretende estimar la eficiencia y la productividad de las principales provincias de la producción de trigo en Egipto. Los datos utilizados en este estudio son datos de panel a nivel de provincias del período 1990-2012, obtenidos del Ministerio de Agricultura y Recuperación Tierras, y de la Agencia Central de Movilización Pública y Estadística, Egipto. Se aplica el enfoque de fronteras estocásticas para medir la eficiencia (función de producción de Cobb-Douglas) y se emplean las especificaciones de Battese y Coelli (1992) y (1995). También se utiliza el índice de Malmquist como una aproximación no paramétrica (Análisis de Envolvente de Datos) para descomponer la productividad total de los factores de las principales provincias productoras de trigo en Egipto en cambio técnico y cambio de eficiencia. El coeficiente de tierra es positivo y significativo en los dos especificaciones Battese y Coelli (1992) y (1995), lo que implica que aumentar la tierra para este cultivo aumentaría significativamente la producción de trigo. El coeficiente de trabajo es positivo y significativo en la especificación de Battese y Coelli (1992), mientras que es positivo y no significativo en la especificación de Battese y Coelli (1995). El coeficiente de la maquinaria es negativo y no significativo en las dos especificaciones de Battese y Coelli (1992) y (1995). El coeficiente de cambio técnico es positivo y no significativo en la especificación de Battese y Coelli (1992), mientras que es positiva y significativo en la especificación de Battese y Coelli (1995). Las variables de efectos del modelo de ineficiencia Battese y Coelli (1995) indican que no existe impacto de las diferentes provincias en la producción de trigo en Egipto; la ineficiencia técnica de la producción de trigo tendió a disminuir durante el período de estudio; y no hay ningún impacto de género en la producción de trigo en Egipto. Los niveles de eficiencia técnica varían entre las diferentes provincias para las especificaciones de Battese y Coelli (1992) y (1995); el nivel mínimo medio de eficiencia técnica es 91.61% en la provincia de Fayoum, mientras que el nivel máximo medio de la eficiencia técnica es 98.69% en la provincia de Dakahlia. La eficiencia técnica toma un valor medio de 95.37%, lo que implica poco potencial para mejorar la eficiencia de uso de recursos en la producción de trigo. La TFPCH de la producción de trigo en Egipto durante el período 1990-2012 tiene un valor menor que uno y muestra un declive. Esta disminución es debida más al componente de cambio técnico que al componente de cambio de eficiencia. La disminución de TFPCH mejora con el tiempo. La provincia de Menoufia tiene la menor disminución en TFPCH, 6.5%, mientras que dos provincias, Sharkia y Dakahlia, son las que más disminuyen en TFPCH, 13.1%, en cada uno de ellas. Menos disminución en TFPCH ocurre en el período 2009-2010, 0.3%, mientras que más disminución se produce en TFPCH en el período 1990-1991, 38.9%. La disminución de la PTF de la producción de trigo en Egipto se atribuye principalmente a la mala aplicación de la tecnología. ABSTRACT The objectives of this study are to estimate the efficiency and productivity of the main governorates of wheat production in Egypt. The data used in this study is a panel data at the governorates level, it represents the time period 1990-2012 and taken from the Ministry of Agriculture and Land Reclamation, and the Central Agency for Public Mobilization and Statistics, Egypt. We apply the stochastic frontier approach for efficiency measurement (Cobb-Douglas production function) and the specifications of Battese and Coelli (1992) and (1995) are employed. Also we use Malmquist TFP index as a non-parametric approach (DEA) to decompose total factor productivity of the main governorates of wheat production in Egypt into technical change and efficiency change. The coefficient of land is positive and significant at Battese and Coelli (1992) and (1995) specifications, implying that increasing the wheat area could significantly enhance the production of wheat. The coefficient of labor is positive and significant at Battese and Coelli (1992) specification, while it is positive and insignificant at Battese and Coelli (1995) specification. The coefficient of machinery is negative and insignificant at the specifications of Battese and Coelli (1992) and (1995). The technical change coefficient is positive and insignificant at Battese and Coelli (1992) specification, while it is positive and significant at Battese and Coelli (1995) specification. The variables of the inefficiency effect model indicate that there is no impact from the location of the different governorates on wheat production in Egypt, the technical inefficiency of wheat production tended to decrease through the period of study, and there is no impact from the gender on wheat production in Egypt. The levels of technical efficiency vary among the different governorates for the specifications of Battese and Coelli (1992) and (1995); the minimum mean level of technical efficiency is 91.61% at Fayoum governorate, while the maximum mean level of technical efficiency is 98.69% at Dakahlia governorate. The technical efficiency takes an average value of 95.37%, this implying that little potential exists to improve resource use efficiency in wheat production. The TFPCH of wheat production in Egypt during the time period 1990-2012 has a value less than one and shows a decline; this decline is due mainly to the technical change component than the efficiency change component. The decline in TFPCH is generally improves over time. Menoufia governorate has the least declining in TFPCH by 6.5%, while two governorates, Sharkia and Dakahlia have the most declining in TFPCH by 13.1% for each of them. The least declining in TFPCH occurred at the period 2009- 2010 by 0.3%, while the most declining in TFPCH occurred at the period 1990-1991 by 38.9%. The declining in TFP of wheat production in Egypt is attributed mainly to poor application of technology.

Análisis sectorial y posicionamiento estratégico: el caso de la industria naval hacia el 2050

El motivo de abordar esta Tesis responde al hecho personal de haber vivido históricamente momentos cumbre de la Construcción Naval en España y no dejar de plantearme, a pesar de mi distancia del sector desde el punto de vista profesional, en las opciones de futuro para volver a ser competitivos en un sector que ha tenido un peso tan importante en la economía española, y que tanto ha ilusionado a centenares de profesionales y compañeros a lo largo de muchas décadas con el optimismo de estar aportando valor para que España fuera competitiva. A lo largo de los últimos años, y la relación con el ámbito de la dirección de Empresas desde el punto de vista de una Escuela de Negocios, así como el contacto con enfoques estratégicos en sectores muy diversos me animó a plantearme la Tesis con el objetivo de reflejar el estado actual del sector y poder valorar alternativas de futuro para la Construcción Naval española, aun sabiendo que son muchos los “maestros” realmente autorizados en nuestros país, con amplios conocimientos y experiencia, que muchas veces, a pesar de las propuestas y de los esfuerzos que han realizado para impulsar el sector, se han encontrado con situaciones adversas, bien de tipo económico, social‐laboral, político ‐a nivel nacional, europeo o global‐, etc., que han impedido un fortalecimiento del sector como todos hubiéramos deseado. La presión histórica ejercida por los países competidores en Construcción naval del ámbito asiático y lejano oriente, así como los compromisos derivados de las Directivas europeas, han obligado al sector de la Construcción Naval en España a buscar unos nuevos posicionamientos estratégicos presentes y, sobre todo, de futuro. Partiendo de un análisis del sector naval, tanto del mercado nacional como del internacional, con especial foco en los países líderes, se plantea investigar, siguiendo el modelo de Porter, las fuerzas competitivas que han influido en estas últimas décadas y que han conducido a la situación actual, valorando la estructura competitiva, el entorno relevante y los efectos de la globalización, con las amenazas de los nuevos y actuales competidores y las barreras existentes. Para abordar esta investigación se ha realizado un análisis del sector naval con la siguiente metodología: 1. Análisis del estado actual de la construcción naval en España. 2. Análisis del estado actual de la construcción naval en el mundo. 3. Estudio de la demanda en el mercado y evolución de la misma en los últimos años: muy centrada en los países líderes y más competitivos. 4. Estudio de las perspectivas de negocio en el sector marítimo y oceánico: estudio particular del transporte marítimo y una comparativa con la explotación de recursos oceánicos. Finalmente se decidió no abordar por falta de datos de futuro las construcciones militares. 5. Estudio de características de la industria naval española y capacidad de los astilleros. Se ha focalizado especialmente en la construcción para valorar la capacidad de futuro. 6. Análisis de fuerzas competitivas de la industria naval española a partir del modelo de Porter. En esta parte se incluyen alguno de los factores críticos externos e internos que ayudan a identificar barreras y estrategias en el entorno de la construcción naval como sector global. 7. Identificación de las oportunidades de negocio hacia el 2050. 8. Alternativas para una estrategia competitiva de actuación frente a las oportunidades de futuro en el 2050. Con esta Tesis se aporta un estudio competitivo actualizado, de acuerdo con el modelo de Porter, con el fin de proponer una posible estrategia competitiva de futuro, que posicione competitivamente la industria naval y el sector marítimo en España en las próximas décadas. ABSTRACT The reason for addressing this thesis responds to my personal experience about having lived historical moments summit Shipbuilding in Spain. Despite my distance from this industry from a professional point of view, I have never stopped wonder myself which are the options for the future to become competitive in an industry that has had such an important weight in the Spanish economy, which has excited so hundreds of professionals and peers through many decades with optimism to be adding value to Spain in order to be competitive again. Over recent years, and the relationship with the field of business management from the point of view of a business school, as well as contact with strategic approaches in diverse sectors encouraged me to wonder Thesis order to reflect the current state of the sector and to evaluate future alternatives for the Spanish Shipbuilding, knowing that many "teachers" really allowed in our country, with extensive knowledge and experience that often, despite proposals and the efforts that have been made to boost the sector, have met with adverse situations, whether economic, social and labor, political kind ‐at national, European or global‐level, etc., that have prevented a strengthening of all sectors we wished. The historical pressure from competing countries in Shipbuilding Asian area and Far East, as well as commitments arising from EU directives, have forced the shipbuilding industry in Spain to seek a new strategic positions present and, above all, future. Starting from an analysis of the shipbuilding sector, both national and international market, with special focus on the leading countries, we propose to investigate, following the model of Porter, the competitive forces that have influenced recent decades and have led to the current situation, assessing the competitive structure of the relevant environment and the effects of globalization, with the threat of new and existing competitors and barriers. To address this research has analyzed the naval sector with the following methodology: 1. Analysis of the current state of shipbuilding in Spain. 2. Analysis of the current state of shipbuilding in the world. 3. Study of the demand in the market and evolution of the same in recent years: very focused on the leading and most competitive countries. 4. Study of business prospects in the maritime and oceanic sector: private study of maritime transport and a comparison with the exploitation of ocean resources. Finally it was decided not to address a lack of data future military construction. 5. Study of characteristics of the Spanish shipbuilding and shipyard capacity. It is particularly focused on building the capacity to assess future. 6. Analysis of competitive forces of the Spanish shipbuilding industry from the model of Porter. In this part they include some critics of the external and internal factors that help identify barriers and strategies in the environment of global shipbuilding sector. 7. Identification of business opportunities by 2050. 8. Alternatives to a competitive strategy of action against future opportunities in 2050. This thesis has sought to provide a competitive study updated according to Porter's model, in order to propose a possible future competitive strategy to reach a competitive position at the shipbuilding industry and the maritime sector in Spain in the coming decades. The historical pressure from competing countries in the Asian sphere Shipbuilding and Far East, as well as commitments arising from EU directives have forced the shipbuilding industry in Spain to seek a new strategic positioning. Starting from an analysis of the shipbuilding sector, both national and international market, with a special focus on the leading countries, it is proposed to analyze, following the model of Porter, the competitive forces that have influenced in recent decades and have led to the current situation, studying the competitive structure of the relevant environment and the effects of globalization, with the threat of new and existing competitors and barriers. It concludes with a forecast of future market and business opportunities arising in the global environment of maritime and naval Industry, in order to propose a possible competitive strategy for the near future, which could help to achieve a competitive position on the shipbuilding and maritime sector in Spain for the coming decades.

La opción radical : viaje a través de Superstudio

Entre 1966 y 1967 un pequeño grupo de jóvenes arquitectos recién titulados en la Facultad de Arquitectura de Florencia escenifican en dos actos programados en las ciudades de Pistoia y Módenala exposición Superarchitettura, con la que sin saberlo inauguran un corto pero intenso periodo de experimentación arquitectónica que convulsionaría Italia durante los 10 años posteriores, dinamitados por multitud de propuestas que darán lugar a la última arquitectura con aspiraciones socio-políticas responsable de un vibrante legado teórico que proclamaba la vuelta a las raíces olvidadas de la profesión y que se mostraba más preocupada por reflexionar sobre sus fundamentos que por perpetuar la práctica de un oficio ahora puesto en crisis. Ambos eventos suponen también el nacimiento simultáneo de Superstudio y Archizoom, dos de los colectivos más influyentes de la arquitectura experimental italiana de estos años, convertidos en protagonistas de un agitado periodo de transición en el que una generación estaba dando paso a la siguiente a través de la sustitución de los principios doctrinarios recibidos de la modernidad por una jugosa incertidumbre desmitificadora ligada a una nueva realidad económica, política y social que marcaría los inicios de la posmodernidad. La experiencia italiana surge aprovechando la efervescencia de un fenómeno que posteriormente algunos críticos etiquetaron como Arquitectura Radical con la intención de unificar el trabajo de un heterogéneo y atomizado grupo de arquitectos fundamentalmente europeos – individualmente comprometidos con el replanteamiento total de la definición y objetivos de la disciplina, al tiempo que participaban en una particular cruzada existencial mediante la que pretendían, si no cambiar el mundo, al menos romper la dinámica estéril de la arquitectura profesional y tecnológica heredada. La presente tesis fomenta la recuperación interesada de este breve momento radical como un ambicioso proyecto de modernización inacabado, pero no solo para analizar las causas de su precipitado final, sino sobre todo para mostrar las razones de su gran éxito internacional, convirtiendo para ello el trabajo de Superstudio, ejemplo paradigmático de la actitud crítica compartida por el resto de operadores contemporáneos, en el catalizador adecuado a partir del cual interpretar y extrapolar su legado con el fin de narrar el cambio trascendental que este episodio supuso para la práctica arquitectónica, alejándola del diseño de edificios y centrándola en la adopción y aplicación de multitud de actividades no tectónicas en un intento por separarse de lo que era percibido como una disciplina corrupta. A lo largo de su corta carrera en común, los seis miembros de Superstudio sustituyeron la construcción convencional por la explotación intensiva de medios alternativos desde el diseño de mobiliario e iluminación y algunos experimentos en torno a la “arquitectura eléctrica”, hasta la expansión mediática de su trabajo a través de revistas, películas, exposiciones y conferencias contribuyendo así a una provocativa destrucción y posterior expansión de los límites dentro de los que hasta ese momento se había mantenido cómodamente instalada la arquitectura. Esta investigación descubre la trascendencia de considerar aquello que ocupó gran parte de la actividad de Superstudio y de sus colegas radicales (muebles, revistas, instalaciones, películas, labor teórica y docente, etc.) como nuevas formas de arquitectura con las que construir un nuevo lenguaje crítico, en un intento por contribuir a renovar y reforzar la relevancia y responsabilidad social de una profesión llamada a expandirse más allá de lo construido para nutrirse e interactuar con todos los ámbitos de nuestro entorno diario. ABSTRACT Between 1966 and 1967 a small group of newly qualified young architects from the Faculty of Architecture of Florence staged in two events planned in the cities of Pistoia and Modena the Superarchitettura exhibition, with which unwittingly inaugurated a short but intense period of architectural experimentation that convulse Italy during the following 10 years, blown up by a multitude of proposals that will result in the latest architecture with socio political aspirations responsible for a vibrant theoretical legacy proclaiming a return to forgotten roots of the profession and that was more concerned with reflect on its fundamentals than perpetuate the practice of a profession now put into crisis. Both events also involve the simultaneous birth of Superstudio and Archizoom, two of the most influential groups of Italian experimental architecture of these years, turned into protagonists of an hectic period of transition in which a generation was giving way to the next through replacing the received doctrinal principles of modernity by a juicy demystifying uncertainty linked to a new reality economic, political and social that would mark the beginning of postmodernism. The Italian experience arises taking advantage of the commotion of a phenomenon that later some critics labeled as Radical Architecture with the intention of unifying the work of a diverse and fragmented group of architects mainly European individually committed to the total rethinking of the definition and objectives of the discipline, while participating in a particular existential crusade with which they sought to, if not change the world, at least break out of the sterile dynamic of professional and technological architecture inherited. This doctoral thesis promotes an interested recovery of in this short radical time as an ambitious modernization project unfinished, but not only to analyze the causes of its precipitous end, but above all to show the reasons for it’s international success, turning the work of Superstudio, a paradigmatic example of the critical attitude shared by the rest of contemporary operators, into the suitable catalyst from which to interpret and extrapolate it’s legacy in order to recount the significant change that this episode marked for architectural practice, moving it away from building and focusing it on the adoption and implementation of many nonLtectonic activities in an attempt to separate from what was perceived as a corrupt discipline. Throughout their short career in common, the six members of Superstudio replaced conventional construction by intensive exploitation of alternative means L from furniture and lighting design and some experiments around the "electric architecture", to the media expansion of their work through magazines, films, exhibitions and lectures thus contributing to a provocative destruction and subsequent expansion of the limits within which architecture had remained ensconced until then. This dissertation finds out the importance of considering what occupied much of the activity of Superstudio and their radical colleagues (furniture, magazines, installations, films, theoretical and educational work, etc.) as new forms of architecture that build a new critical language, in an attempt to help renew and reinforce the relevance and social responsibility of a profession call to expand beyond the built to nourish and interact with all areas of our everyday environment.