Stratigraphy, facies architecture and tectonic implications of the Upper Devonian to Lower Carboniferous Campwyn Volcanics of the northern New England Fold Belt

Upper Devonian to Lower Carboniferous strata of the Campwyn Volcanics of east central Queensland preserve a substantial sequence of first-cycle volcaniclastic sedimentary and coeval volcanic rocks that record prolonged volcanic activity along the northern New England Fold Belt. The style and scale of volcanism varied with time, producing an Upper Devonian sequence of mafic volcano-sedimentary rocks overlain by a rhyolitic ignimbrite-dominated sequence that passes upward into a Lower Carboniferous limestone-bearing sedimentary sequence. We define two facies associations for the Campwyn Volcanics. A lower facies association is dominated by mafic volcanic-derived sedimentary breccias with subordinate primary mafic volcanic rocks comprising predominantly hyaloclastite and peperite. Sedimentary breccias record episodic and high energy, subaqueous depositional events with clastic material sourced from a mafic lava-dominated terrain. Some breccias contain a high proportion of attenuated dense, glassy mafic juvenile clasts, suggesting a syn-eruptive origin. The lower facies association coarsens upwards from a lithic sand-dominated sequence through a thick interval of pebble- to boulder-grade polymict volcaniclastic breccias, culminating in facies that demonstrate subaerial exposure. The silicic upper facies association marks a significant change in eruptive style, magma composition and the nature of eruptive sources, as well as the widespread development of subaerial depositional conditions. Crystal-rich, high-grade, low- to high-silica rhyolite ignimbrites dominate the base of this facies association. Biostratigraphic age controls indicate that the ignimbrite-bearing sequences are Famennian to lower-mid Tournaisian in age. The ignimbrites represent extra-caldera facies with individual units up to 40 m thick and mostly lacking coarse lithic breccias. Thick deposits of pyroclastic material interbedded with fine-grained siliceous sandstone and mudstone (locally radiolarian-bearing) were deposited from pyroclastic flows that crossed palaeoshorelines or represent syn-eruptive, resedimented pyroclastic material. Some block-bearing lithic-pumice-crystal breccias may also reflect more proximal subaqueous silicic explosive eruptions. Crystal-lithic sandstones interbedded with, and overlying the ignimbrites, contain abundant detrital volcanic quartz and feldspar derived from the pyroclastic deposits. Limestone is common in the upper part of the upper facies association, and several beds are oolitic (cf. Rockhampton Group of the Yarrol terrane). Overall, the upper facies association fines upward and is transgressive, recording a return to shallow-marine conditions. Palaeocurrent data from all stratigraphic levels in the Campwyn Volcanics indicate that the regional sediment-dispersal direction was to the northwest, and opposed to the generally accepted notion of easterly sediment dispersal from a volcanic arc source. The silicic upper facies association correlates in age and lithology to Early Carboniferous silicic volcanism in the Drummond (Cycle 1) and Burdekin Basins, Connors Arch, and in the Yarrol terranes of eastern Queensland. The widespread development of silicic volcanism in the Early Carboniferous indicates that silicic (rift-related) magmatism was not restricted to the Drummond Basin, but was part of a more substantial silicic igneous province.

Full-scale demonstration of biological nutrient removal in a single tank SBR process

Complete biological nutrient removal (BNR) in a single tank, sequencing batch reactor (SBR) process, is demonstrated here at full-scale on a typical domestic wastewater. The unique feature of the UniFed process is the introduction of the influent into the settled sludge blanket during the settling and decant periods of the SBR operation. This achieves suitable conditions for denitrification and anaerobic phosphate release which is critical to successful biological phosphorus removal, It also achieves a selector effect, which helps in generating a compact, well settling biomass in the reactor. The results of this demonstration show that it is possible to achieve well over 90% removal of GOD, nitrogen and phosphorus in such a process. Effluent quality achieved over a six-month operating period directly after commissioning was: 29 mg/l GOD, 0.5 mg/l NH4-N, 1.5 mg/l NOx-N and 1.5 mg/l PO4-P (50%-iles of daily samples). During an 8-day, intensive sampling period, the effluent BOD5 was

Exceptionally high-rate nitrification in sequencing batch reactors treating high ammonia landfill leachate

The nitrogen removal capacity of a suspended culture system treating mature landfill leachate was investigated. Leachate containing high ammonium levels of 300-900 mg N/L was nitrified in a bench scale sequencing batch reactor. Leachate from four different landfills was treated over a two year period for the removal of nitrogen. In this time, a highly specific nitrifying culture was attained that delivered exceptionally high rates of ammonia removal. No sludge was wasted from the system to increase the throughput and up to 13 g/L of MLSS was obtained. Settleability of the purely nitrifying biomass was excellent with SVI less than 40 mL/g, even at the high sludge concentrations. Nitrification rates up to 246 mg NI(L h) (5.91 g N/(L d)) and specific nitrification rates of 36 mg N/(gVSS h) (880 mg N/(gVSS d)) were obtained. The loading to the system at this time allowed complete nitrification of the leachate with a hydraulic retention time of only 5 hours. Following these successful treatability studies, a full-scale plant was designed and built at one of the landfills investigated.

Visual Biology of Hawaiian Coral Reef Fishes. III. Environmental Light and an Integrated Approach to the Ecology of Reef Fish Vision

In the previous two papers in this three-part series, we have examined visual pigments, ocular media transmission, and colors of the coral reef fish of Hawaii. This paper first details aspects of the light field and background colors at the microhabitat level on Hawaiian reefs and does so from the perspective and scale of fish living on the reef. Second, information from all three papers is combined in an attempt to examine trends in the visual ecology of reef inhabitants. Our goal is to begin to see fish the way they appear to other fish. Observations resulting from the combination of results in all three papers include the following. Yellow and blue colors on their own are strikingly well matched to backgrounds on the reef such as coral and bodies of horizontally viewed water. These colors, therefore, depending on context, may be important in camouflage as well as conspicuousness. The spectral characteristics of fish colors are correlated to the known spectral sensitivities in reef fish single cones and are tuned for maximum signal reliability when viewed against known backgrounds. The optimal positions of spectral sensitivity in a modeled dichromatic visual system are generally close to the sensitivities known for reef fish. Models also predict that both UV-sensitive and red-sensitive cone types are advantageous for a variety of tasks. UV-sensitive cones are known in some reef fish, red-sensitive cones have yet to be found. Labroid colors, which appear green or blue to us, may he matched to the far-red component of chlorophyll reflectance for camouflage. Red cave/hole dwelling reef fish are relatively poorly matched to the background they are often viewed against but this may be visually irrelevant. The model predicts that the task of distinguishing green algae from coral is optimized with a relatively long wavelength visual pigment pair. Herbivorous grazers whose visual pigments are known possess the longest sensitivities so far found. Labroid complex colors are highly contrasting complementary colors close up but combine, because of the spatial addition, which results from low visual resolution, at distance, to match background water colors remarkably well. Therefore, they are effective for simultaneous communication and camouflage.

Perceived stress as a predictor of the self-reported new diagnosis of symptomatic CHD in older women

This article describes one aspect of a prospective cohort study of 10,432 women aged between 70 and 75 years. After a 3-year period, 503 women self-reported a new diagnosis by a doctor of angina or myocardial infarction (symptomatic coronary heart disease [CHD]). Time one psychosocial variables (Duke Social Support Index, time pressure, Perceived Stress Scale, Mental Health Index, having a partner, educational attainment, and location of residence) were analyzed using univariate binary logistic regression for their ability to predict subsequent symptomatic CHD. Of these variables, the Duke Social Support Index, Perceived Stress Scale and the Mental Health Index were found to be significant predictors of symptomatic CHID diagnosis. Only the Perceived Stress Scale, however, proved to be a significant independent predictor. After controlling for time one nonpsychosocial variables, as well as the frequency of family doctor visits, perceived stress remained a significant predictor of the new diagnosis of symptomatic CHD in this cohort of older women over a 3-year period.

Quality of life assessment in the community-dwelling elderly: Validation of the Assessment of Quality of Life (AQoL) Instrument and comparison with the SF-36

Measurement of Health-Related Quality of Life (HRQoL) of the elderly requires instruments with demonstrated sensitivity, reliability, and validity, particularly with the increasing proportion of older people entering the health care system. This article reports the psychometric properties of the 12-item Assessment of Quality of Life (AQoL) instrument in chronically ill community-dwelling elderly people with an 18-month follow-up. Comparator instruments included the SF-36 and the OARS. Construct validity of the AQoL was strong when examined via factor analysis and convergent and divergent validity against other scales. Receiver Operator Characteristic (ROC) curve analyses and relative efficiency estimates indicated the AQoL is sensitive, responsive, and had the strongest predicative validity for nursing home entry. It was also sensitive to economic prediction over the follow-up. Given these robust psychometric properties and the brevity of the scale, AQoL appears to be a suitable instrument for epidemiologic studies where HRQoL and utility data are required from elderly populations. (C) 2003 Elsevier Science Inc. All rights reserved.

Differences in lung function, growth parameters and frequency of hospital admissions between adolescents with cystic fibrosis-related diabetes and controls

As survival of patients with CF increases,glucose intolerance and cystic fibrosisrelated diabetes (CFRD),ar e increasingly recognised common complications. CFRD may be preceded by a pre-diabetic state. Using markers identified as being associated with CFRD may improve targeted screening. Aim: To identify features consistently predicting CFRD in paediatric patients. Patients diagnosed with CFRD between January 1997–January 2002 were compared with age and sex matched controls. Clinical,micr obiological, and hospitalisation data was collected at time of CFRD diagnosis,and at six monthly intervals for 3 yr prior to diagnosis. Eight patients with CFRD were identified,mean age 13.7 yr (S.D. 3.49) at time of diagnosis. Control patients underwent OGTT to ensure normal glucose tolerance. Patients with CFRD had a lower FEV1 up to 12 months prior to diagnosis however, this was only significant at diagnosis. There was no difference in weight and height z scores between the 2 groups; however,the decrease in weight and height z scores in the CFRD group over 3 yr prior to diagnosis was significant. Mean number of days in hospital and admissions per patient significantly increased in the CFRD group,6 months prior to diagnosis. No other significant differences were observed between the 2 groups. Conclusions: This study has shown a difference in lung function,gr owth parameters and frequency of hospital admissions between patients with CFRD and controls. These differences may be utilised as tools for targeted screening in the paediatricyadolescent population. Further larger scale studies are required to improve guidelines for targeted screening in this population.

Living with 'difference': growing up Chinese in white Australia

This Article does not have an abstract.

A technique to assess small-scale heterogeneity of chemical properties in soil aggregates

A new method is presented which allows the separation of the soil aggregate exterior from the aggregate core. The method employs a combination of aggregate freezing with rapid separation of aggregate exteriors using ultrasonic energy. The factors influencing the thickness of the removed aggregate surface layer include water content of the aggregate prior to freezing, temperature difference between that of the frozen aggregate and that of the liquid it is submerged in during sonification, sonification time and energy, and the type of the immersion liquid. The success of the method and the thickness of the removed aggregate surface were examined using barium ( Ba2+) as a tracer. Barium ( as BaCl2) is rapidly absorbed by soil and is present at only very low levels in natural soils. Surface layers of 0.2 - 0.4 cm thickness were successfully removed from aggregates of 1 - 4 cm diameter. Two examples are given from soils in northern NSW to demonstrate the occurrence of small- scale heterogeneity in soil chemical properties. Compared with the surface fraction, a 4 - 7% higher calcium concentration was found in the core fraction of a clay loam soil ( Dermosol). Conversely, on a cracking clay soil ( Vertosol), atrazine concentration was around 15 times greater in the aggregate surface fractions compared with core fractions. Compared with the traditional estimation of soil chemical properties on homogenised bulk soil samples, it is suggested that separate analysis of aggregate surface and core fractions could provide useful additional information on the relationships between soil properties and environmental responses.

Modelagem da dispersão de odores em ambientes urbanos

O presente trabalho investigou o problema da modelagem da dispersão de compostos odorantes em presença de obstáculos (cúbicos e com forma complexa) sob condição de estabilidade atmosférica neutra. Foi empregada modelagem numérica baseada nas equações de transporte (CFD1) bem como em modelos algébricos baseados na pluma Gausseana (AERMOD2, CALPUFF3 e FPM4). Para a validação dos resultados dos modelos e a avaliação do seu desempenho foram empregados dados de experimentos em túnel de vento e em campo. A fim de incluir os efeitos da turbulência atmosférica na dispersão, dois diferentes modelos de sub-malha associados à Simulação das Grandes Escalas (LES5) foram investigados (Smagorinsky dinâmico e WALE6) e, para a inclusão dos efeitos de obstáculos na dispersão nos modelos Gausseanos, foi empregado o modelo PRIME7. O uso do PRIME também foi proposto para o FPM como uma inovação. De forma geral, os resultados indicam que o uso de CFD/LES é uma ferramenta útil para a investigação da dispersão e o impacto de compostos odorantes em presença de obstáculos e também para desenvolvimento dos modelos Gausseanos. Os resultados também indicam que o modelo FPM proposto, com a inclusão dos efeitos do obstáculo baseado no PRIME também é uma ferramenta muito útil em modelagem da dispersão de odores devido à sua simplicidade e fácil configuração quando comparado a modelos mais complexos como CFD e mesmo os modelos regulatórios AERMOD e CALPUFF. A grande vantagem do FPM é a possibilidade de estimar-se o fator de intermitência e a relação pico-média (P/M), parâmetros úteis para a avaliação do impacto de odores. Os resultados obtidos no presente trabalho indicam que a determinação dos parâmetros de dispersão para os segmentos de pluma, bem como os parâmetros de tempo longo nas proximidades da fonte e do obstáculo no modelo FPM pode ser melhorada e simulações CFD podem ser usadas como uma ferramenta de desenvolvimento para este propósito. Palavras chave: controle de odor, dispersão, fluidodinâmica computacional, modelagem matemática, modelagem gaussiana de pluma flutuante, simulação de grandes vórtices (LES).

Efeitos da depleção de nitrogênio sobre a biomassa e produção lipídica lipídica de três espécies de microalgas fitoplânticas

O uso de lipídios obtidos a partir da biomassa de microalgas tem sido descrito como uma alternativa promissora para a indústria petro-diesel e envolve etapas como o cultivo de microalgas, separação da biomassa e extração de lipídios. Para viabilizar a produção em larga escala, é necessário selecionar as espécies mais produtivas, diminuir os custos de produção e determinar as condições ideais de cultivo. Os gêneros Chlorella, Desmodesmus e Ankistrodesmus apresentam características favoráveis à produção comercial, tendo sido então selecionada uma espécie de cada no presente trabalho. O objetivo do estudo foi avaliar diferentes condições de cultivo de Ankistrodesmus fusiformis, Chlorella vulgaris e Desmodesmus spinosus visando o aumento da produtividade em biomassa e lipídios totais. As algas foram identificadas e cultivadas em laboratório, em condições controladas de temperatura a 26ºC (±1), aeração por borbulhamento à pressão ambiente e luminosidade fornecida por lâmpadas fluorescentes, com intensidade de 47,25 μmol de fótons m-2.s-1 (3500 lux), fotoperiodo de 12h e pH 7, sob duas concentrações estressantes de nitrato de sódio (0,10 g/L e 0,05g/L). Os cultivos duraram em média 16 dias, sendo as curvas de crescimento construídas com dados de espectrofotometria óptica coletados a cada 48h, e a biomassa obtida ao final do cultivo por centrifugação e liofilização de cada unidade experimental. Para extração dos lipídios totais, foi utilizada a mistura de clorofórmio: metanol (1:2), segundo a metodologia de Bligh & Dyer (1959). Os tratamentos de estresse em D.spinosus resultaram em maior acúmulo lipídico, com aumento de até 149,7%, porém com drástica diminuição do crescimento e biomassa. Em C. vulgaris, nos tratamentos de estresse, verificou-se apenas ligeiro aumento do peso seco e teor de lipídios, não havendo diferença significativa entre os tratamentos e o controle. Da mesma forma, A.fusiformis não mostrou respostas significativas ao estresse pela redução de nitrato de sódio do meio, havendo ligeira diminuição do conteúdo lipídico e aumento do crescimento e biomassa. Com respostas diferentes para cada espécie estudada, evidencia-se a necessidade do conhecimento da fisiologia e autoecologia da cepa a ser cultivada em escala comercial visando à produção de ácidos graxos para fins de biodiesel.

Cultivo in vitro de Crambe abyssinica Hochst. : germinação, micropropagação, estabilidade genética e anatomia foliar

Crambe (Crambe abyssinica) pertence à família Brassicaceae, originário da Etiópia e principalmente destinado à produção de forragem (30 a 32% de proteína bruta). Atualmente, tem sido bastante cultivado visando à extração de óleo vegetal. Com os atuais incentivos à busca de fontes de energias renováveis, o cultivo de crambe vem ganhando papel de destaque na produção de biodiesel por suas diversas vantagens, como: (a) rápido ciclo de vida (colhida em torno de 90 dias); (b) alta produção de biomassa; (c) alta produtividade de sementes (1000 e 1500 kg ha-1); (d) menor custo de produção em relação a outras fontes oleaginosas, como, canola, girassol e soja; (e) um percentual de óleo total na semente entre 32 e 38%, superando, por exemplo, a soja; (f) potencial de fitorremediação, eficiente na descontaminação de arsênio, cromo e outros metais pesados; e (g) elevado percentual de ácido erúcico (50 a 60%) sendo útil na indústria de plástico e lubrificante. Devido aos poucos trabalhos realizados com crambe, abre-se um vasto campo de investigações científicas que tenham como objetivo desenvolver as potencialidades dessa cultura e, consequentemente, melhorar os aspectos agronômicos e tecnológicos para seu emprego na indústria de biodiesel. Nesse contexto, as técnicas de cultivo in vitro foram importantes tanto para a propagação massal, quanto como ferramenta para uma possível aplicação de outras técnicas biotecnológicas, contribuindo para uma produção homogênea, fiel e em larga escala. Portanto, este trabalho teve como objetivo geral avaliar as condições mais favoráveis à germinação, estabelecimento in vitro e micropropagação de Crambe abyssinica Hochst., além de verificar possíveis alterações genéticas e anatômicas, possibilitando a regeneração e produção de plântulas viáveis. Para a germinação e estabecimento in vitro de crambe, as condições mais favoráveis foram em meio B5 ou WPM, na presença ou ausência de pericarpo e na presença de luz. Na micropropagação dessa espécie, uma frequência satisfatória de regeneração de brotos foi obtida a partir de segmentos apicais utilizados como explante em meio contendo 5 μM de BAP (6- benzilaminopurina), e o alongamento foi satisfatório com 1 μM de GA3 (ácido giberélico). Os marcadores moleculares ISSR (Inter-Simples Sequence Repeats) utilizados para a análise da estabilidade genética indicaram que o segmento apical de crambe é um explante confiável para a micropropagação de plantas geneticamente verdadeiras (true-to-tipe), ou seja, mantém a estabilidade genética. As diversas fontes de citocininas e concentrações utilizadas neste trabalho não promoveram mudanças, no sentido de alterar a organização e/ou a espessura em relação ao controle, e as alterações observadas na estrutura e espessura das folhas dos tratamentos de aclimatização prejudicaram o processo de estabelecimento da plântula ex vitro. Contudo, existe a necessidade de um enraizamento e aclimatização eficiente para completa propagação in vitro de crambe. Portanto, este protocolo de regeneração de plantas in vitro de crambe pode ser útil no processo de criação e desenvolvimento de novas cultivares em um tempo mais curto e no melhoramento genético usando explantes apicais.

Fatores associados ao equilíbrio funcional em idosos com disfunção vestibular crônica

Tarefas do dia-a-dia podem ser muito desafiadoras para o equilíbrio do idoso. OBJETIVO: Verificar a associação entre equilíbrio funcional, avaliado pela Berg Balance Scale (BBS) e os dados sociodemográficos, clínicos e de mobilidade (Timed up and go test - TUGT, Dynamic Gait Index - DGI) em idosos vestibulopatas crônicos. MATERIAL E MÉTODO: Estudo de casos com 120 idosos com diagnóstico de disfunção vestibular crônica. Foram utilizados os testes de Mann-Whitney, Kruskal-Wallis seguido do teste de Dunn e Coeficiente de Correlação de Spearman. RESULTADOS: Ocorreram associações =-0,354; e correlações significantes entre a pontuação total da BBS e idade (p<0,001), faixa etária (p<0,001), número de doenças (p=0,030), número de =-0,287; p=0,001), número de medicamentos (p=0,014), número de doenças (=-0,274; p=0,002), quedas recorrentes (p=0,010), tendência a medicamentos (quedas (p=0,002), diagnóstico topográfico de vestibulopatia central (p<0,001) =-0,709; periodicidade da tontura (p=0,039), TUGT (<0,001) e DGI =-0,748; p(<0,001). CONCLUSÕES: O equilíbrio funcional de idosos vestibulopatas crônicos avaliados à BBS é mais comprometido quando associado ao avançar da idade, faixa etária mais idosa (80 anos ou mais), aumento do número de doenças, presença de cinco ou mais doenças, polifarmacoterapia, quedas recorrentes, tendência a quedas, vestibulopatia central, tontura diária, comprometimento da mobilidade e marcha.

Multi-scale modeling of the mechanical behavior of polymer-based materials

Polymers have become the reference material for high reliability and performance applications. In this work, a multi-scale approach is proposed to investigate the mechanical properties of polymeric based material under strain. To achieve a better understanding of phenomena occurring at the smaller scales, a coupling of a Finite Element Method (FEM) and Molecular Dynamics (MD) modeling in an iterative procedure was employed, enabling the prediction of the macroscopic constitutive response. As the mechanical response can be related to the local microstructure, which in turn depends on the nano-scale structure, the previous described multi-scale method computes the stress-strain relationship at every analysis point of the macro-structure by detailed modeling of the underlying micro- and meso-scale deformation phenomena. The proposed multi-scale approach can enable prediction of properties at the macroscale while taking into consideration phenomena that occur at the mesoscale, thus offering an increased potential accuracy compared to traditional methods.

Coupling Mechanical and Electrical Behavior in the Multi-scale Simulation of Polymer-based CNT Nanocomposites

A numeric model has been proposed to investigate the mechanical and electrical properties of a polymeric/carbon nanotube (CNT) composite material subjected to a deformation force. The reinforcing phase affects the behavior of the polymeric matrix and depends on the nanofiber aspect ratio and preferential orientation. The simulations show that the mechanical behavior of a computer generated material (CGM) depends on fiber length and initial orientation in the polymeric matrix. It is also shown how the conductivity of the polymer/CNT composite can be calculated for each time step of applied stress, effectively providing the ability to simulate and predict strain-dependent electrical behavior of CNT nanocomposites.