Effect of mechanical milling on the structural, magnetic and dielectric properties of coprecipitated ultrafine zinc ferrite

Nanosized ZnFe2O4 particles containing traces of a-Fe2O3 by intent were produced by low temperature chemical coprecipitation methods. These particles were subjected to high-energy ball milling. These were then characterised using X-ray diffraction, magnetisation and dielectric studies. The effect of milling on zinc ferrite particles have been studied with a view to ascertaining the anomalous behaviour of these materials in the nanoregime. X-ray diffraction and magnetisation studies carried out show that these particles are associated with strains and it is the surface effects that contribute to the magnetisation. Hematite percentage, probably due to decomposition of zinc ferrite, increases with milling. Dielectric behaviour of these particles is due to interfacial polarisation as proposed by Koops. Also the defects caused by the milling produce traps in the surface layer contributes to dielectric permittivity via spin polarised electron tunnelling between grains. The ionic mechanism is enhanced in dielectrics with the rise in temperature which results in the increase of dielectric permittivity with temperature.

Fabrication and the study of zinc sulphide based electroluminescent devices

This thesis contains the author's work in preparing efficient EL phosphors, the details of fabrication of low voltage operated thin film EL (TFEL) devices and DC TFEL devices. Some of the important work presented here are related to the white light emitting ZnS:Cu,Pr,Cl phosphor which can be colour tuned by changing the excitation frequency, observation of energy transfer from Cu/Ag ions to rare earth ions in ZnS:(Cu/Ag), RE,Cl phosphors, development of TFEL device which can be operated below 50V, optimization of the device parameters for long life, high brightness in terms of the active and insulating layer thicknesses, observation of dependence of threshold voltage for the onset of emission on frequency of excitation when a novel dielectric Eu2O3 film was used as insulator and the devices with multicolor emission using ZnS doped with rare earth as active layer. Characterization based on other devices based on ZnS:Sm, ZnS:Pr, ZnS:Dy and their emission characteristics are also illustrated

"Effects of some heavy metals copper. zinc and lead on certain tissues of £153 Qarsia (Hamilton and Buchanan) in different environments

The research investigations on pollution, particularly in coastal/ estuarine environments are recent ones and started only in 1970s. Hence the informations available are fragmentary and scattered. They throw some light only on either the concentration of heavy metals in water or in sediment or in organisms. No concerted efforts have been made to consolidate and correlate the results between the environment and biota. Literature on the level of concentration of heavy metals in different tissues of organisms with regard to their availability in the living media, their ratio, their inter—relationship, tolerance limit of organisms, etc. are very few or rather nil. in view of the importance enumerated above, the candidate has selected the topic "Effects of some heavy metals copper, zinc and lead on certain tissues of E E (Hamilton and Buchanan) in different environments" for detailed studies and to understand systematically (i) the source of effluents and wastes, (ii) the concentration of heavy metals copper, zinc and lead in water, in sediments and in tissues of the test animal, (iii) their effects, (iv) capacity of tolerance and accumulation in different tissues of the animal, and (V) the "Bioaccumulation Factor", etc.

Bioremediation of Zinc Using Bacillus sp. Isolated from Metal- Contaminated Industrial Zone

The production of heavy metals has increased quickly since the industrial revolution. Heavy metals frequently form compounds that can be toxic, carcinogenic, or mutagenic, even in very small concentrations. The usual techniques of removing metals from wastewaters are in general expensive and have many restrictions. Alternative methods of metal removal and recovery based on biological materials have been measured. Among various agents, the use of microbes for the removal of metals from industrial and municipal wastewater has been proposed as a promising alternative to conventional heavy metal management strategies in past decades. Thus, the present study aims to isolate and characterize bacteria from soil, sediment, and waters of metal-contaminated industrial area to study the zinc resistance patterns and the zinc bioaccumulation potential of the selected microorganism. Zinc analysis of the samples revealed that concentrations varying from 39.832 m g/L to 310.24 m g/L in water, 12.81 m g/g to 407.53 m g/g in soil, and 81.06 m g/g to 829.54 m g/g in sediment are present. Bacterial zinc resistance study showed that tolerance to Zn was relatively low (<500 m g/ml). Ten bacterial genera were represented in soil and 11 from water, while only 5 bacterial genera were recorded from sediment samples. Bacillus, Pseudomonas , and Enterobacter were found in soil, sediment, and water samples. Highly zincresistant Bacillus sp. was selected for zinc removal experiment. Zinc removal studies revealed that at pH 5 about 40% reduction occurs; at pH 7, 25% occurs; and at pH 9, 50% occurs. Relatively an increased removal of Zinc was observed in the fi rst day of the experiment by Bacillus sp. The metal bioaccumulative potential of the selected isolates may have possible applications in the removal and recovery of zinc from industrial ef fluents.

On the magnetic properties of ultra-Þne zinc ferrites

Zinc ferrite belongs to the class of normal spinels where it is assumed to have a cation distribution of Zn2`(Fe3`)2(O2~)4, and it is purported to be showing zero net magnetisation. However, there have been recent reports suggesting that zinc ferrite exhibits anomaly in its magnetisation. Zinc ferrite samples have been prepared by two di¤erent routes and have been analysed using low energy ion scattering, Mo¬ ssbauer spectroscopy and magnetic measurements. The results indicate that zinc occupies octahedral sites, contrary to the earlier belief that zinc occupies only the tetrahedral sites in a normal spinel. The amount of zinc on the B site increases with decrease in particle size. The LEIS results together with the Mo¬ ssbauer results and the magnetic measurements lead to the conclusion that zinc occupies the B site and the magnetisation exhibited by ultraÞne particles of zinc is due to short range ordering

On structural, optical and dielectric properties of zinc aluminate nanoparticles

Zinc aluminate nanoparticles with average particle size of 40 nm were synthesized using a sol–gel combustion method. X-ray diffractometry result was analysed by Rietveld refinement method to establish the phase purity of the material. Different stages of phase formation of the material during the synthesis were investigated using differential scanning calorimetry and differential thermogravimetric analysis. Particle size was determined with transmission electron microscopy and the optical bandgap of the nanoparticles was determined by absorption spectroscopy in the ultraviolet-visible range. Dielectric permittivity and a.c. conductivity of the material were measured for frequencies from 100 kHz to 8 MHz in the temperature range of 30–120◦C. The presence of Maxwell– Wagner type interfacial polarization was found to exist in the material and hopping of electron by means of quantum mechanical tunneling is attributed as the reason for the observed a.c. conductivity

Processability, hardness, andmagnetic properties of rubber ferrite composites containingmanganese zinc ferrites

Rubber ferrite composites have the unique advantage of mouldability, which is not easily obtainable using ceramic magnetic materials. The incorporation of mixed ferrites in appropriate weight ratios into the rubber matrix not only modi es the dielectric properties of the composite but also imparts magnetic properties to it. Mixed ferrites belonging to the series of Mn(1 – x )Znx Fe2O4 have been synthesised with diVerent values of x in steps of 0·2, using conventional ceramic processing techniques. Rubber ferrite composites were prepared by the incorporation of these pre-characterised polycrystallineMn(1 – x )Znx Fe2O4 ceramics into a natural rubber matrix at diVerent loadings according to a speci c recipe. The processability of these elastomers was determined by investigating their cure characteristics. The magnetic properties of the ceramic llers as well as of the rubber ferrite composites were evaluated and the results were correlated. Studies of the magnetic properties of these rubber ferrite composites indicate that the magnetisation increases with loading of the ller without changing the coercive eld. The hardness of these composites shows a steady increase with the loading of the magnetic llers. The evaluation of hardness andmagnetic characteristics indicates that composites with optimummagnetisation and almost minimum stiVness can be achieved with a maximum loading of 120 phr of the ller at x=0·4. From the data on the magnetisation of the composites, a simple relationship connecting the magnetisation of the rubber ferrite composite and the ller was formulated. This can be used to synthesise rubber ferrite composites with predetermined magnetic properties

On the dielectric dispersion and absorption in nanosized manganese zinc mixed ferrites

The temperature and frequency dependence of dielectric permittivity and dielectric loss of nanosized Mn1−xZnxFe2O4 (for x = 0, 0.2, 0.4, 0.6, 0.8, 1) were investigated. The impact of zinc substitution on the dielectric properties of the mixed ferrite is elucidated. Strong dielectric dispersion and broad relaxation were exhibited by Mn1−xZnxFe2O4. The variation of dielectric relaxation time with temperature suggests the involvement of multiple relaxation processes. Cole–Cole plots were employed as an effective tool for studying the observed phenomenon. The activation energies were calculated from relaxation peaks and Cole–Cole plots and found to be consistent with each other and indicative of a polaron conduction

Mechanism of ac conduction in nanostructured manganese zinc mixed ferrites

Mn1−xZnxFe2O4 nanoparticles (x = 0 to 1) were synthesized by the wet chemical co-precipitation technique. X-ray diffraction and transmission electron microscopy and high resolution transmission electron microscopy were effectively utilized to investigate the different structural parameters. The ac conductivity of nanosized Mn1−xZnxFe2O4 were investigated as a function of frequency, temperature and composition. The frequency dependence of ac conductivity is analysed by the power law σ(ω)ac = Bωn which is typical for charge transport by hopping or tunnelling processes. The temperature dependence of frequency exponent n was investigated to understand the conduction mechanism in different compositions. The conduction mechanisms are mainly based on polaron hopping conduction

Magnetic field-induced cluster formation and variation of magneto-optical signals in zinc-substituted ferrofluids

Fine magnetic particles (sizeffi100A ˚ ) belonging to the series ZnxFe1 xFe2O4 were synthesized by cold co-precipitation methods and their structural properties were evaluated using X-ray diffraction. Magnetization studies have been carried out using vibrating sample magnetometry (VSM) showing near-zero loss loop characteristics. Ferrofluids were then prepared employing these fine magnetic powders using oleic acid as surfactant and kerosene as carrier liquid by modifying the usually reported synthesis technique in order to induce anisotropy and enhance the magneto-optical signals. Liquid thin films of these fluids were prepared and field-induced laser transmission through these films was studied. The transmitted light intensity decreases at the centre with applied magnetic field in a linear fashion when subjected to low magnetic fields and saturate at higher fields. This is in accordance with the saturation in cluster formation. The pattern exhibited by these films in the presence of different magnetic fields was observed with the help of a CCD camera and was recorded photographically

Untersuchungen zur Eliminierung und Resorption von Zink aus Säugerspermatozoen während der Nebenhodenpassage

Während der Spermatogenese wird das Element Zink an die Sulfhydrylreste der Cysteine in den Mantelfaserproteinen der Spermienflagellen gebunden. So kann in den noch unreifen Mantelfasern die ungerichtete Ausbildung von Disulfidbrücken verhindert werden. Im Zuge der Spermatozoenreifung während der Nebenhodenpassage wird dieses Zink androgenabhängig zu einem hohen Prozentsatz wieder eliminiert. Die nun gerichtete Ausbildung von Disulfidbrücken ermöglicht die Versteifung der Mantelfasern. Diese Rigidität stellt die Voraussetzung zur progressiven Motilität dar, ohne die eine Fertilisierung der Eizelle im weiblichen Genitaltrakt nicht möglich ist. Da eine negative Korrelation zwischen dem Zinkgehalt von Flagellen und ihrer Motilität besteht (Henkel et al., 1999), hat die Zinkeliminierung während der Nebenhodenpassage eine entscheidende Bedeutung in der Entwicklung der Spermatozoen. Die vorliegende Arbeit untersucht die Mechanismen der epididymalen Zinkeliminierung sowie die an diesem Prozess beteiligten Komponenten und den Verbleib des eliminierten Zinks am System des Bullen, der Ratte und des Menschen. Mittels proteinchemischer Verfahren kann im bovinen System ein zinkbindendes 60 kDa-Protein als Albumin identifiziert werden. Ein 80 kDa-Protein mit zinkbindenden Eigenschaften bleibt unidentifiziert. Die Zinkbindungskapazität der fraktionierten Proteine ist dabei im Caput epididymidis am stärksten ausgeprägt. Atomabsorptionsspektralphotometrische Untersuchungen zeigen die höchsten flagellären Zinkwerte in den Spermien des Rete testis und eine Abnahme des Zinkgehalts zwischen Nebenhodenkopf und -körper. Durch Autometallographie kann eine epitheliale Zinkresorption im Nebenhodenschwanz nachgewiesen werden. Dort erfolgt auch die basale Anreicherung des Zinks. Am Zinkstoffwechsel scheint auch der Macrophage Migration Inhibitory Factor (MIF) beteiligt zu sein. Dieser ist ein Zytokin mit Oxidoreduktasecharakter und kommt unter anderem im Nebenhodenepithel sowie in den Vesikeln des Nebenhoden-Fluids der Ratte vor. MIF zeigt in den hier durchgeführten Untersuchungen sowohl in systemhomologer, als auch in rekombinanter Form in vitro eine Zink-eliminierende Wirkung auf Rattenspermatozoen des Caputs und der Cauda epididymidis und hat somit möglicherweise Einfluss auf den Reifungsprozess der Spermien im Nebenhoden. Lit.: Henkel R, Bittner J, Weber R, Hüther F, Miska W (1999). Relevance of zinc in human sperm flagella and its relation to motility. Fertil Steril 71: 1138-1143

Reduced L_1 level width and Coster-Kronig yields by relaxation and continuum interactions in atomic zinc

Calculations of the level width \gamma( L_1) and the f_12 and f_13 Coster-Kronig yields for atomic zinc have been performed with Dirac-Fock wave functions. For \gamma(L_1), a large deviation between theory and evaluated data exists. We include the incomplete orthogonality of the electron orbitals as well as the interchannel interaction of the decaying states. Orbital relaxation reduces the total rates in all groups of the electron-emission spectrum by about 10-20 %. Different, however, is the effect of the continuum interaction. The L_1-L_23X Coster-Kronig part of the spectrum is definitely reduced in its intensity, whereas the MM and MN spectra are slightly enhanced. This results in a reduction of Coster-Kronig yields, where for medium and heavy elements considerable discrepancies have been found in comparison to relativistic theory. Briefly, we discuss the consequences of our calculations for heavier elements.

Análisis de factibilidad en la recolección y recuperación de pilas de zinc-aire para audífonos cubiertos por el POS

Debido a la latente preocupación ambiental, la nueva y futura legislación sobre el tema y la forma en que estos factores afectan a las empresas, en este trabajo realizado en la Universidad del Rosario en el primer semestre del 2011, se realizó un estudio de la factibilidad de realizar un plan post consumo para las pilas zinc-aire, referencias R10, R13, R312 y R675 que son utilizadas para los aparatos auditivos. Existe una gran cantidad de pilas zinc-aire que alcanzan el final de su vida útil semanalmente en el país y estas son potencialmente tóxicas y no-biodegradables, por lo que decidimos investigar qué tan factible podía ser hacer una recuperación eficiente de las mismas y qué beneficios podría reportar a las empresas del sector. En la investigación se descartaron opciones como la desmaterialización para venta de sus materiales y la recarga de las pilas para su re-uso, ambas debido a que aún no se cuenta con la tecnología necesaria en el continente para estas opciones. Se consideró entonces el planteamiento de un plan Post-consumo para la correcta disposición de estas pilas, para lo cual es necesario exportarla al continente Europeo. A partir del planteamiento del Plan Post-consumo se hizo un estudio de la factibilidad del mismo, logrando determinar los aspectos principales del plan, como son: Información del producto, del mercado, transporte, almacenamiento, procedimiento del reciclaje, beneficios ambientales, y los costos de llevarlo a cabo.

Biological Basis and Clinical Application of Serum Tumor Markers

Cancer is the result of the accumulation of changes in molecules with important functions in processes such as cell proliferation, apoptosis, cell death and gene repair. Molecules, substances or altered pathways constitute tumor markers or biomarkers useful in clinical monitoring of cancer patients, because they have demonstrated to be suitable for the valuation of the patient’s treatment and it efficiency. Determination of tumor markers has not been very successful due to the low sensitivity and specificity of the techniques used and the requirement of large volumes of biological samples or the use of invasive methods for collecting them. The serum tumor markers arise, as a useful tool to obtain information about the disease progress and constitute as a scientific challenge to improve its applicability in early diagnosis, prognosis, monitoring of the disease and evaluation of therapeutic efficacy.

The pattern of fall of serum bilirubin after operative relief of obstructive jaundice. A preliminary report

This is the beginning of a prospective study on patients who have obstructive jaundice to see how the serum bilirubin falls after operative relief of the obstruction. Seven of such patients have been studied; four had carcinoma of the head of the pancreas while the other three had choledocholithiasis. The patients with carcinoma had relief of the jaundice through a biliary-enteric anastomosis and those with common bile duct stones had choledochotomy with stone extraction which was completed with insertion of a T-tube. Serial bilirubin estimations were then performed post-operatively to chart the pattern and rate of descent of this in each patient. Our observations suggest that the pattern of fall of serum bilirubin after successful decompression of the extra-hepatic biliary tree exhibit a distinct pattern regardless of the surgical procedure performed for the relief of the obstruction.