Sperimentazione di protocolli di routing su topologie di rete ibride

In questa tesi si è voluto interfacciare dispositivi di nuova generazione (Raspberry Pi), presenti in una topologia di rete già implementata, con dispositivi di vecchia generazione, come Router Cisco e Switch HP. Questi ultimi sono dispositivi fisici, mentre i Raspberry, tramite tool mininet e altre impostazioni, possono generare dispositivi virtuali. Si è quindi applicato un interfacciamento tra le due tipologie di apparati, creando una rete nuova, e adatta come caso a ricoprire le reti attuali, siccome questo è un esempio di come con poche modifiche si può intervenire su qualsiasi rete già operativa. Si sono quindi osservati i criteri generali su cui operano sia i router, che gli switch, e si sono osservati come questi interagiscono con un flusso di dati attraverso vari protocolli, alcuni rifacenti al modello ISO/OSI, altri all'OSPF.

Opportunistic Contact Graph Routing

L'ambiente di questa tesi è quello del Delay and Disruption Tolerant Networks (DTN), un'architettura di rete di telecomunicazioni avente come obiettivo le comunicazioni tra nodi di reti dette “challenged”, le quali devono affrontare problemi come tempi di propagazione elevati, alto tasso di errore e periodi di perdita delle connessioni. Il Bunde layer, un nuovo livello inserito tra trasporto e applicazione nell’architettura ISO/OSI, ed il protocollo ad esso associato, il Bundle Protocol (BP), sono stati progettati per rendere possibili le comunicazioni in queste reti. A volte fra la ricezione e l’invio può trascorrere un lungo periodo di tempo, a causa della indisponibilità del collegamento successivo; in questo periodo il bundle resta memorizzato in un database locale. Esistono varie implementazioni dell'architettura DTN come DTN2, implementazione di riferimento, e ION (Interplanetary Overlay Network), sviluppata da NASA JPL, per utilizzo in applicazioni spaziali; in esse i contatti tra i nodi sono deterministici, a differenza delle reti terrestri nelle quali i contatti sono generalmente opportunistici (non noti a priori). Per questo motivo all’interno di ION è presente un algoritmo di routing, detto CGR (Contact Graph Routing), progettato per operare in ambienti con connettività deterministica. È in fase di ricerca un algoritmo che opera in ambienti non deterministici, OCGR (Opportunistic Contact Graph Routing), che estende CGR. L’obiettivo di questa tesi è quello di fornire una descrizione dettagliata del funzionamento di OCGR, partendo necessariamente da CGR sul quale è basato, eseguire dei test preliminari, richiesti da NASA JPL, ed analizzarne i risultati per verificare la possibilità di utilizzo e miglioramento dell’algoritmo. Sarà inoltre descritto l’ambiente DTN e i principali algoritmi di routing per ambienti opportunistici. Nella parte conclusiva sarà presentato il simulatore DTN “The ONE” e l’integrazione di CGR e OCGR al suo interno.

State-of-the-Art Multihoming Protocols and Support for Android

Il traguardo più importante per la connettività wireless del futuro sarà sfruttare appieno le potenzialità offerte da tutte le interfacce di rete dei dispositivi mobili. Per questo motivo con ogni probabilità il multihoming sarà un requisito obbligatorio per quelle applicazioni che puntano a fornire la migliore esperienza utente nel loro utilizzo. Sinteticamente è possibile definire il multihoming come quel processo complesso per cui un end-host o un end-site ha molteplici punti di aggancio alla rete. Nella pratica, tuttavia, il multihoming si è rivelato difficile da implementare e ancor di più da ottimizzare. Ad oggi infatti, il multihoming è lontano dall’essere considerato una feature standard nel network deployment nonostante anni di ricerche e di sviluppo nel settore, poiché il relativo supporto da parte dei protocolli è quasi sempre del tutto inadeguato. Naturalmente anche per Android in quanto piattaforma mobile più usata al mondo, è di fondamentale importanza supportare il multihoming per ampliare lo spettro delle funzionalità offerte ai propri utenti. Dunque alla luce di ciò, in questa tesi espongo lo stato dell’arte del supporto al multihoming in Android mettendo a confronto diversi protocolli di rete e testando la soluzione che sembra essere in assoluto la più promettente: LISP. Esaminato lo stato dell’arte dei protocolli con supporto al multihoming e l’architettura software di LISPmob per Android, l’obiettivo operativo principale di questa ricerca è duplice: a) testare il roaming seamless tra le varie interfacce di rete di un dispositivo Android, il che è appunto uno degli obiettivi del multihoming, attraverso LISPmob; e b) effettuare un ampio numero di test al fine di ottenere attraverso dati sperimentali alcuni importanti parametri relativi alle performance di LISP per capire quanto è realistica la possibilità da parte dell’utente finale di usarlo come efficace soluzione multihoming.

Outcome Measures in Glaucoma : a systematic review of Cochrane Reviews and Protocols

Peer reviewed

Outcome Measures in Glaucoma : a systematic review of Cochrane Reviews and Protocols

Peer reviewed

Gonadotrophin-releasing hormone agonist protocols for pituitary suppression in assisted reproduction

Peer reviewed

Outcome Measures in Glaucoma : a systematic review of Cochrane Reviews and Protocols

Peer reviewed

Routing and dimensioning of 3G multi-service networks

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Routing and dimensioning of 3G multi-service networks

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Optimization of Cooling Protocols for Hearts Destined for Transplantation

Design and analysis of conceptually different cooling systems for the human heart preservation are numerically investigated. A heart cooling container with required connections was designed for a normal size human heart. A three-dimensional, high resolution human heart geometric model obtained from CT-angio data was used for simulations. Nine different cooling designs are introduced in this research. The first cooling design (Case 1) used a cooling gelatin only outside of the heart. In the second cooling design (Case 2), the internal parts of the heart were cooled via pumping a cooling liquid inside both the heart’s pulmonary and systemic circulation systems. An unsteady conjugate heat transfer analysis is performed to simulate the temperature field variations within the heart during the cooling process. Case 3 simulated the currently used cooling method in which the coolant is stagnant. Case 4 was a combination of Case 1 and Case 2. A linear thermoelasticity analysis was performed to assess the stresses applied on the heart during the cooling process. In Cases 5 through 9, the coolant solution was used for both internal and external cooling. For external circulation in Case 5 and Case 6, two inlets and two outlets were designed on the walls of the cooling container. Case 5 used laminar flows for coolant circulations inside and outside of the heart. Effects of turbulent flow on cooling of the heart were studied in Case 6. In Case 7, an additional inlet was designed on the cooling container wall to create a jet impinging the hot region of the heart’s wall. Unsteady periodic inlet velocities were applied in Case 8 and Case 9. The average temperature of the heart in Case 5 was +5.0oC after 1500 s of cooling. Multi-objective constrained optimization was performed for Case 5. Inlet velocities for two internal and one external coolant circulations were the three design variables for optimization. Minimizing the average temperature of the heart, wall shear stress and total volumetric flow rates were the three objectives. The only constraint was to keep von Mises stress below the ultimate tensile stress of the heart’s tissue.

A novel near real-time quality-control procedure for radiometric profiles measured by Bio-Argo floats: protocols and performances

An array of Bio-Argo floats equipped with radiometric sensors has been recently deployed in various open ocean areas representative of the diversity of trophic and bio-optical conditions prevailing in the so-called Case 1 waters. Around solar noon and almost everyday, each float acquires 0-250 m vertical profiles of Photosynthetically Available Radiation and downward irradiance at three wavelengths (380, 412 and 490 nm). Up until now, more than 6500 profiles for each radiometric channel have been acquired. As these radiometric data are collected out of operator’s control and regardless of meteorological conditions, specific and automatic data processing protocols have to be developed. Here, we present a data quality-control procedure aimed at verifying profile shapes and providing near real-time data distribution. This procedure is specifically developed to: 1) identify main issues of measurements (i.e. dark signal, atmospheric clouds, spikes and wave-focusing occurrences); 2) validate the final data with a hierarchy of tests to ensure a scientific utilization. The procedure, adapted to each of the four radiometric channels, is designed to flag each profile in a way compliant with the data management procedure used by the Argo program. Main perturbations in the light field are identified by the new protocols with good performances over the whole dataset. This highlights its potential applicability at the global scale. Finally, the comparison with modeled surface irradiances allows assessing the accuracy of quality-controlled measured irradiance values and identifying any possible evolution over the float lifetime due to biofouling and instrumental drift.

A novel near real-time quality-control procedure for radiometric profiles measured by Bio-Argo floats: protocols and performances

An array of Bio-Argo floats equipped with radiometric sensors has been recently deployed in various open ocean areas representative of the diversity of trophic and bio-optical conditions prevailing in the so-called Case 1 waters. Around solar noon and almost everyday, each float acquires 0-250 m vertical profiles of Photosynthetically Available Radiation and downward irradiance at three wavelengths (380, 412 and 490 nm). Up until now, more than 6500 profiles for each radiometric channel have been acquired. As these radiometric data are collected out of operator’s control and regardless of meteorological conditions, specific and automatic data processing protocols have to be developed. Here, we present a data quality-control procedure aimed at verifying profile shapes and providing near real-time data distribution. This procedure is specifically developed to: 1) identify main issues of measurements (i.e. dark signal, atmospheric clouds, spikes and wave-focusing occurrences); 2) validate the final data with a hierarchy of tests to ensure a scientific utilization. The procedure, adapted to each of the four radiometric channels, is designed to flag each profile in a way compliant with the data management procedure used by the Argo program. Main perturbations in the light field are identified by the new protocols with good performances over the whole dataset. This highlights its potential applicability at the global scale. Finally, the comparison with modeled surface irradiances allows assessing the accuracy of quality-controlled measured irradiance values and identifying any possible evolution over the float lifetime due to biofouling and instrumental drift.

Using protocols in ICU practice. Engaging the staff.

Aims/Purpose: Protocols are evidenced-based structured guides for directing care to achieve improvements. But translating that evidence into practice is a major challenge. It is not acceptable to simply introduce the protocol and expect it to be adopted and lead to change in practice. Implementation requires effective leadership and management. This presentation describes a strategy for implementation that should promote successful adoption and lead to practice change.
Presentation description: There are many social and behavioural change models to assist and guide practice change. Choosing a model to guide implementation is important for providing a framework for action. The change process requires careful thought, from the protocol itself to the policies and politics within the ICU. In this presentation, I discuss a useful pragmatic guide called the 6SQUID (6 Steps in QUality Intervention Development). This was initially designed for public health interventions, but the model has wider applicability and has similarities with other change process models. Steps requiring consideration include examining the purpose and the need for change; the staff that will be affected and the impact on their workload; and the evidence base supporting the protocol. Subsequent steps in the process that the ICU manager should consider are the change mechanism (widespread multi-disciplinary consultation; adapting the protocol to the local ICU); and identifying how to deliver the change mechanism (educational workshops and preparing staff for the changes are imperative). Recognising the barriers to implementation and change and addressing these locally is also important. Once the protocol has been implemented, there is generally a learning curve before it becomes embedded in practice. Audit and feedback on adherence are useful strategies to monitor and sustain the changes.
Conclusion: Managing change successfully will promote a positive experience for staff. In turn, this will encourage a culture of enthusiasm for translating evidence into practice.

Design and standardization of PCR primers and protocols for detection of clonal immunoglobulin and T-cell receptor gene recombinations in suspect lymphoproliferations: report of the BIOMED-2 Concerted Action BMH4-CT98-3936.

In a European BIOMED-2 collaborative study, multiplex PCR assays have successfully been developed and standardized for the detection of clonally rearranged immunoglobulin (Ig) and T-cell receptor (TCR) genes and the chromosome aberrations t(11;14) and t(14;18). This has resulted in 107 different primers in only 18 multiplex PCR tubes: three VH-JH, two DH-JH, two Ig kappa (IGK), one Ig lambda (IGL), three TCR beta (TCRB), two TCR gamma (TCRG), one TCR delta (TCRD), three BCL1-Ig heavy chain (IGH), and one BCL2-IGH. The PCR products of Ig/TCR genes can be analyzed for clonality assessment by heteroduplex analysis or GeneScanning. The detection rate of clonal rearrangements using the BIOMED-2 primer sets is unprecedentedly high. This is mainly based on the complementarity of the various BIOMED-2 tubes. In particular, combined application of IGH (VH-JH and DH-JH) and IGK tubes can detect virtually all clonal B-cell proliferations, even in B-cell malignancies with high levels of somatic mutations. The contribution of IGL gene rearrangements seems limited. Combined usage of the TCRB and TCRG tubes detects virtually all clonal T-cell populations, whereas the TCRD tube has added value in case of TCRgammadelta(+) T-cell proliferations. The BIOMED-2 multiplex tubes can now be used for diagnostic clonality studies as well as for the identification of PCR targets suitable for the detection of minimal residual disease.

Implementation of Content Centric Networks Through Domain Name System

Content Centric Network (CCN) is a proposed future internet architecture that is based on the concept of contents name instead of the hosts name followed in the traditional internet architecture. CCN architecture might do changes in the existing internet architecture or might replace it completely. In this paper, we present modifications to the existing Domain Name System (DNS) based on the CCN architecture requirements without changing the existing routing architecture. Hence the proposed solution achieves the benefits of both CCN and existing network infrastructure (i.e. content based routing, independent of host location, caching and content delivery protocols).