Variable-number tandem repeats genotyping used to aid and inform management strategies for a bovine Johne's disease incursion in tropical and subtropical Australia

The application of variable-number tandem repeats (VNTR) genotyping of Mycobacterium avium subsp. paratuberculosis isolates to assist in investigating incidents of bovine Johne’s disease in a low-prevalence region of Australia is described in the current study. Isolates from a response to detection of bovine Johne’s disease in Queensland were compared with strains from national and international sources. The tandem application of mycobacterial interspersed repetitive unit (MIRU) and multilocus short sequence repeats (MLSSR) genotyping identified 2 strains, 1 that infected cattle on multiple properties with trace-forward histories from a common infected property, and 1 genotypically different strain recovered from a single property. The former strain showed an identical genotype to an isolate from India. Neither strain showed a genotypic link to regions of Australia with a higher prevalence of the disease. Genotyping has indicated incursions from 2 independent sources. This intelligence has informed investigations into potential routes of entry and the soundness of ongoing control measures, and supported strategy and policy decisions regarding management of Mycobacterium avium subsp. paratuberculosis incursions for Queensland.

Wrought aluminum-nickel alloys for high strength-high conductivity applications

Aluminum-Nickel alloys ranging from 0.06 pct to 6.1 pct (by wt) Ni have been developed for high strength-high conductivity applications. These alloys were produced by solidification in a permanent mold followed by homogenization, hot extrusion or hot rolling and cold drawing to wire form. This sequence of fabrication a) led to the production of fine fibrous dispersoids of NiAl3 as part of the Al-NiAl3 eutectic during the initial casting operation, b) permitted the retention of fine fibrous dispersiods of NiAl3 produced during casting without any significant coarsening during processing and c) led to uniform dispersion and general alignment of these fibrous dispersoids along a given direction in the product without any measurable fiber-matrix separation, extensive fiber-fragmentation or crack production in the matrix. These alloys can be processed to wire form as easily as aluminum and when processed by the above sequence, possess very attractive combination of high strength-high electrical conductivity. Tensile strengths range from 173 N/mm2 (at 0.6 pct Ni) to 241 N/mm2 (at 6.1 pct Ni) in combination with corresponding conductivity values between 62 pct IACS and 55.5 pct IACS. The wires also possess attractive yield strength; for instance, the 0.2 pct off-set strength of Al-6.1 pct Ni wire is 213 N/mm2. Using simple composite rules, the estimated strength and the conductivity of NiAl3 fibers were found to be 1380 N/mm2 and 18 pct IACS respectively, in these wires.

Geriatrisen lääkehoidon koulutustarpeet perusterveydenhuollossa - Moniammatillisen täydennyskoulutuksen suunnittelu LOST-alueen kotihoidon henkilöstölle

Sosiaali- ja terveysministeriön 2006 julkaiseman vanhustyön ja geriatrisen lääkehoidon kehittämistä koskevan selvityksen yhtenä tärkeänä huolenaiheena oli iäkkäiden lääkehoidon useat epäkohdat, kuten iäkkäitä hoitavien hoitajien lääkeosaamiseen liittyvät puutteet ja ongelmat. Yksi keino parantaa iäkkäitä hoitavien eri tahojen lääkehoito-osaamista on täydennyskoulutus, johon kaikilla sosiaali- ja terveydenhuollon ammattiryhmillä on oikeus ja velvollisuus. Täydennyskoulutuksella pystytään myös kehittämään organisaatioiden toimintaa ja tuottamaan uusia, parempia palveluita. Tutkimuksessa selvitettiin Lohjan, Siuntion, Inkoon ja Karjalohjan muodostaman sosiaali- ja terveydenhuollon yhteistoiminta-alueen LOSTin kotihoidon yksiköiden iäkkäiden lääkehoitoihin liittyviä koulutustarpeita. Tämän tutkimuksen avulla syvennettiin samalle tutkimusryhmälle tehdyn kyselytutkimuksen tuloksia. Tutkimusaineistona käytettiin LOST-alueen kotihoidon yksiköiden hoitajille (n=150) farmaseutin lopputyönä tehtyä kyselyaineistoa sekä työntekijöille (n=6) ja esimiehille (n=6) tehtyjä erillisiä ryhmäkeskusteluja. Lisäksi näkökulman laajentamiseksi ja moniammatillisuuden korostamiseksi aineistona käytettiin kotihoidon asiakkaita hoitavien lääkärien (n=4) teemahaastatteluja. Kyselyaineistosta analysoitiin erikseen sairaanhoitajien, lähihoitajien ja kodinhoitajien koulutustarpeet. Samat asiat nousivat esille kunkin ammattiryhmän tuloksissa. Tärkeimpinä lääkehoito-osaamiseen liittyvinä teoreettisina koulutettavina asioina kyselystä nousivat esille iäkkäiden farmakokinetiikka ja lääkkeiden käyttöön liittyvät erityispiirteet, lääkkeiden vaikutukset, lääkkeiden haittavaikutukset sekä lääkkeiden yhteisvaikutukset ja yhteensopivuus. Lisäksi teoreettisista taidoista nousi hoitotyön etiikkaan liittyvät tarkkuus ja huolellisuus työssä. Käytännön taidoista tärkeimpinä koulutettavina aiheina kyselystä nousivat asiakkaiden lääkehoidon ja voinnin seuranta, lääkkeiden jakaminen sekä lääkkeiden annosteluun liittyen se, että annostellaan oikeaa lääkettä ja vahvuutta, oikea annos ja oikeaan aikaan sekä oikeat antotavat. Ryhmäkeskusteluista ja lääkärien teemahaastatteluista haettiin syvempää ymmärrystä kyselyn tuloksiin. Yksi tärkeimmistä tämän laadullisen tutkimuksen löydöksistä oli kotihoidon yhteistyöhön liittyvät epäkohdat. Lääkehoitojen toteuttamista ja seurantaa voitaisiin tulosten perusteella parantaa lääkärien ja kotihoidon hoitajien yhteisellä koulutuksella. Tärkeimpiä sairauksia tai oireita, joihin hoitajat toivoisivat yhteisiä toimintakäytäntöjä, ovat diabetes, sydän- ja verisuonisairaudet, kipu, muistisairaudet sekä psyykensairaudet. Lisäksi koulutusaiheiksi tutkimuksesta nousivat iäkkäiden lääkehoidon erityispiirteet, lääkkeiden antoreitit ja lääkemuodot. Kyselyn sekä ryhmäkeskustelujen ja lääkärien teemahaastattelujen tuloksista tehtiin lopuksi synteesi, jonka lopputuloksena LOST-alueen kotihoidon hoitohenkilöstölle sekä kotihoidon lääkäreille koottiin yhteinen tarvelähtöinen täydennyskoulutussuunnitelma. Suunnitelma tehtiin aineistosta nousseiden koulutusaiheiden pohjalta, eikä siihen lisätty aiheita tutkimuksen ulkopuolelta.

Ketoprofeenin biologinen käytettävyys ja farmakokinetiikka sioilla eri antotavoilla ja ketoprofeeniyliannoksen farmakokinetiikka ja vaikutus munuaisiin lampailla

Ketoprofeeni on yleisesti käytetty ei-steroidinen tulehduskipulääke (NSAID) lampaiden ja sikojen kivunlievityksessä. Tietoa ketoprofeenin oikeista annosmääristä eri eläinlajeilla on saatavilla rajallisesti. Oikeaa lääkeainemäärää ei voida luotettavasti ekstrapoloida toisten eläinlajien tai ihmisten perusteella. Epäillyissä tulehduskipulääkemyrkytyksissä ongelmana on tietää, oliko eläimen saama lääkeannos toksinen. Lampailla tehdyn tutkimuksen tavoitteena oli selvittää, muuttuuko ketoprofeenin kinetiikka kymmenkertaisella yliannoksella, tutkia yliannoksen vaikutusta munuaisiin ja löytää yksinkertainen tapa diagnosoida yliannos virtsasta. Sioilla tehdyn tutkimuksen tavoitteena oli selvittää ketoprofeenin biologista käytettävyyttä ja ketoprofeenin farmakokinetiikkaa sioilla intravaskulaarisella, intramuskulaarisella ja peroraalisella annolla. Keskeiset tutkimuksessa määritettävät muuttujat olivat AUC0-_, Cmax ja tmax. Hyötyosuus laskettiin i.v. -annon perusteella. Kuudelle lampaalle annettiin 30 mg/kg i.v. -ketoprofeenia. Ketoprofeenin pitoisuuksia seurattiin 24 tunnin ajan plasmanäytteillä, joiden perusteella määritettiin farmakokineettiset parametrit. Veri- ja virtsanäytteistä tutkittiin muun muassa mahdollisesta munuaisvauriosta kertovia entsyymejä. 24 tunnin kuluttua lääkkeenannosta lampaat lopetettiin ja munuaiset tutkittiin histologisesti. Tutkittaville kahdeksalle sialle annosteltiin 3 mg/kg intravaskulaarista, intramuskulaarista ja oraalista ketoprofeenia sekä 6 mg/kg oraalista ketoprofeenia. Tutkimus suoritettiin satunnaistettuna vaihtovuorotutkimuksena. Ketoprofeenin pitoisuuksia seurattiin plasmanäytteillä 48 tunnin ajan lääkkeenannosta ja kaikille antotavoille laskettiin farmakokineettiset parametrit. Lisäksi tutkittiin valmisteiden biologinen samanarvoisuus. Molempien tutkimusten in vivo -kokeet suoritettiin Eläinlääketieteellisessä tiedekunnassa. Samoin munuaisten histologinen tutkimus ja virtsasta ja verestä tehdyt määritykset, lukuun ottamatta ketoprofeeninpitoisuuden analysointia. Plasman ketoprofeenipitoisuus analysoitiin korkean erotuskyvyn nestekromatografialla (HPLC). Ketoprofeenimääritykset ja farmakokineettinen analyysi suoritettiin Farmasian tiedekunnassa. Lampaiden kymmenkertainen ketoprofeeniyliannos oli toksinen. Seerumin urea- ja kreatiniinipitoisuus nousivat ja histologisissa näytteissä näkyi akuutti munuaistiehyen vaurio. Useiden entsyymien pitoisuus nousi virtsassa. Selvimmin ja nopeimmin nousi virtsan laktaattidehydrogenaasipitoisuus, jonka määrittäminen vaikuttaa potentiaaliselta tavalta diagnosoida ketoprofeenin toksinen annos. Ketoprofeenin eliminaation puoliintumisaika toksisella annoksella oli samaa suuruusluokkaa kuin aiemmissa tutkimuksissa terapeuttisella annoksella, joten yliannos ei muuttanut ketoprofeenin kinetiikkaa. AUC- ja Cmax -arvot olivat suhteessa suurempia kuin terapeuttisella annoksella, joten tutkimuksen perusteella kyseiset arvot eivät nousseet lineaarisesti annoksen noustessa toksiseksi. Sioille annetut ketoprofeenivalmisteet eivät olleet biologisesti samanarvoisia keskenään. Hyötyosuus oli erittäin hyvä kaikilla antotavoilla. tmax oli kaikilla antotavoilla hieman yli tunnin kuluttua lääkkeenannosta. Oraalisen 3 mg/kg -annoksen Cmax oli 5,1 mg/l ja AUC 32 mg l-1 h ja intramuskulaarisen vastaavat arvot olivat 7,6 mg/l ja 37 mg l-1 h. Oraalisen ketoprofeenin annostasojen AUC- ja Cmax -arvot korreloivat keskenään, joten ketoprofeenin kinetiikka oli lineaarista. Intravaskulaarisen ja oraalisen annon puoliintumisajoissa oli tilastollisesti merkitsevä ero. Ketoprofeenin jakautumistilavuudessa ja puhdistumassa ei ollut tilastollisesti merkitsevää eroa eri antotapojen välillä.

Quasicrystalline and related crystalline phases in a rapidly solidified 2024-2Li aluminium alloy

The formation and decomposition of quasicrystalline and crystalline phases in as-rapidly solidified and annealed commercial AISI 2024 aluminum alloy containing 2 wt% Li have been investigated by detailed transmission electron microscopy, including a combination of bright field and dark field imaging, selected area diffraction pattern analysis and energy dispersive X-ray microanalysis. The microstructure of as-melt spun 2024-2Li consists of alpha-Al cells, containing small coherent delta' precipitates, and particles or a continuous network of the icosahedral phase at the cell boundaries. After annealing at 300-degrees-C, the intercellular particles of the icosahedral phase coarsen progressively and assume a more faceted shape; after annealing at 400-degrees-C, particles of the decagonal and crystalline O phases precipitate heterogeneously on preexisting particles of the icosahedral phase; and after annealling at 500-degrees-C, the icosahedral and decagonal phases dissolve completely, and small particles of the crystalline O phase remain together with newly precipitated plates of the T1 phase. The icosahedral phase in melt spun and melt spun/annealed 2024-2Li belongs to the Al6CuLi3 class of icosahedral phases, with a quasilattice constant of 0.51 nm, a stoichiometry of (Al, Si)6(Cu, Mn, Fe) (Li, Mg)3 and an average composition of Al-24.1 at.% Cu-6.4 at.% Mg-1.7 at.% Si-0.3 at.% Mn-0.5 at.% Fe as-melt spun and Al-21.9 at.% Cu-6.3 at.% Mg-1.0 at.% Si-0.5 at.% Fe as-heat-treated. The decagonal phase in melt spun/annealed 2024-2Li belongs to the Al4Mn class of decagonal phases, with a periodicity of 1.23 nm along the 10-fold symmetry axis, a stoichiometry of Al3(Cu, Mn, Fe) and an average composition of Al-10.3 at.% Cu-13.8 at.% Mn-2.3 at.% Fe. The crystalline O phase in melt spun/annealed 2024-2Li has an orthorhombic structure with lattice parameters of a = 2.24 nm, b = 2.35 nm and c = 1.23 nm, a stoichiometry of Al3(Cu, Mn, Fe) and an average composition of Al-11.0 at.% Cu-14.8 at.% Mn-3.9 at.% Fe. Detailed analysis of selected area diffraction patterns shows a close similarity between the icosahedral, decagonal and crystalline O phases in melt spun and melt spun/annealed 2024-2Li. In particular, the decagonal phase and crystalline O phases have a similar composition, and exhibit an orientation relationship which can be expressed as: [GRAPHICS] suggesting that the orthorhombic O phase is an approximant structure for the decagonal phase.

Superconductivity in rapidly quenched metallic systems with nanoscale structure

Nanocomposites of Al?In, Al?Pb, and Zn?Pb have been prepared and characterized using rapid quenching techniques and the nature of superconducting transitions in them has been studied by resistivity measurements. The precipitated second phases (In and Pb) have particle sizes (d) of a few tens of nanometers such that ?0?d?dmin, where ?0 is the superconducting zero temperature coherence length and dmin is the minimum particle size that supports superconductivity. The onset of superconductivity generally starts in samples with d??0 and progressively other grains with d??0 become superconducting. We suggest that the proximity effect of the matrix plays a significant role. In an Al?In system, even with 40?wt.% In, the zero resistivity state is obtained at T?1.33 times the Tc of Al. But in Al?Pb and Zn?Pb, the zero resistivity state is obtained at T?4 and 5 times the Tc of Al and Zn with only 10�15 wt?% Pb, respectively.

Needleless Vaccine Delivery Using Micro-Shock Waves

Shock waves are one of the most efficient mechanisms of energy dissipation observed in nature. In this study, utilizing the instantaneous mechanical impulse generated behind a micro-shock wave during a controlled explosion, a novel nonintrusive needleless vaccine delivery system has been developed. It is well-known that antigens in the epidermis are efficiently presented by resident Langerhans cells, eliciting the requisite immune response, making them a good target for vaccine delivery. Unfortunately, needle-free devices for epidermal delivery have inherent problems from the perspective of the safety and comfort of the patient. The penetration depth of less than 100 mu m in the skin can elicit higher immune response without any pain. Here we show the efficient utilization of our needleless device (that uses micro-shock waves) for vaccination. The production of liquid jet was confirmed by high-speed microscopy, and the penetration in acrylamide gel and mouse skin was observed by confocal microscopy. Salmonella enterica serovar Typhimurium vaccine strain pmrG-HM-D (DV-STM-07) was delivered using our device in the murine salmonellosis model, and the effectiveness of the delivery system for vaccination was compared with other routes of vaccination. Vaccination using our device elicits better protection and an IgG response even at a lower vaccine dose (10-fold less) compared to other routes of vaccination. We anticipate that our novel method can be utilized for effective, cheap, and safe vaccination in the near future.

Mullite-zirconia composites

Mullite-zirconia composite powders were prepared by the combustion of an aqueous heterogeneous redox mixture consisting of Al(NO3)(3), Zr(NO3)(4)/ZrO(NO3)(2), silica fume and urea/diformyl hydrazine at 500 degrees C. X-ray diffraction data showed that a large amount of tetragonal zirconia existed in the composite powders in spite of high temperature calcination. Milled composite powders showed enhanced densification compared to the unmilled powders and the microstructure of the sintered (1600 degrees C) compacts showed the presence of spherical zirconia grains in intergranular positions along with elongated mullite grains.

Is there a role for estrogen in follicular maturation in the primate

The present study focusses attention on the effects of blocking estrogen synthesis, during follicular phase, on follicular maturation in the adult female bonnet monkey (Macaca radiata). Administration of cycling females (n = 4) with an aromatase inhibitor CGS 16949A (AI) by Alzet mini-pump (2.5 mg/day) from day 3 of cycle resulted in significant reduction in basal (by 53%) and surge levels of estrogen (by 70%) but this had no effect on follicular maturation, ovulation and luteal function as assessed by serum hormone profiles as well as laparotomy. This lack of need for estrogen for completion of follicular maturation process was confirmed by administering cycling monkeys hFSH (25 IU/day) from day 3 till day 8 of the cycle along with (5 mg AI/day) or without Al (n = 3/group). Administration of Al resulted in suppression of FSH induced increase in serum estrogen (by 100%) and elevation in circulating androstenedione. Aromatase inhibitor treatment had no effect on either the number of follicles developed or their size relative to control. Testing the ability of both granulosa and thecal cells, removed on day 9 of treatment cycle, to respond to gonadotropins in vitro showed no change indicating that cellular development and maturation of follicular cells had occurred normally. It is concluded that follicular maturation in the primate can occur even when increase in estrogen synthesis is blocked.

Quasicrystalline Coatings Through Laser Processing: A Study on Process Optimisation and Microstructure Evolution

Composite coatings containing quasicrystalline (QC) phases in Al-Cu-Fe alloys were prepared by laser cladding using a mixture of the elemental powders. Two substrates, namely pure aluminum and an Al-Si alloy were used. The clad layers were remelted at different scanning velocities to alter the growth conditions of different phases. The process parameters were optimized to produce quasicrystalline phases. The evolution of the microstructure in the coating layer was characterized by detailed microstructural investigation. The results indicate presence of quasicrystals in the aluminum substrate. However, only approximant phase could be observed in the substrate of Al-Si alloys. It is shown that there is a significant transport of Si atoms from the substrate to the clad layer during the cladding and remelting process. The hardness profiles of coatings on aluminum substrate indicate a very high hardness. The coating on Al-Si alloy, on the other hand, is ductile and soft. The fracture toughness of the hard coating on aluminum was obtained by nano-indentation technique. The K1C value was found to be 1.33 MPa m1/2 which is typical of brittle materials.

Micro-blast waves using detonation transmission tubing

Micro-blast waves emerging from the open end of a detonation transmission tube were experimentally visualized in this study. A commercially available detonation transmission tube was used (Nonel tube, M/s Dyno Nobel, Sweden), which is a small diameter tube coated with a thin layer of explosive mixture (HMX traces of Al) on its inner side. The typical explosive loading for this tube is of the order of 18 mg/m of tube length. The blast wave was visualized using a high speed digital camera (frame rate 1 MHz) to acquire time-resolved schlieren images of the resulting flow field. The visualization studies were complemented by computational fluid dynamic simulations. An analysis of the schlieren images showed that although the blast wave appears to be spherical, it propagates faster along the tube axis than along a direction perpendicular to the tube axis. Additionally, CFD analysis revealed the presence of a barrel shock and Mach disc, showing structures that are typical of an underexpanded jet. A theory in use for centered large-scale explosions of intermediate strength gave good agreement with the blast trajectory along the tube axis. The energy of these micro-blast waves was found to be J and the average TNT equivalent was found to be . The repeatability in generating these micro-blast waves using the Nonel tube was very good and this opens up the possibility of using this device for studying some of the phenomena associated with muzzle blasts in the near future.

Chitosan-dextran sulphate nanocapsule drug delivery system as an effective therapeutic against intraphagosomal pathogen Salmonella

Objectives: The ability to target conventional drugs efficiently inside cells to kill intraphagosomal bacteria has been a major hurdle in treatment of infective diseases. We aimed to develop an efficient drug delivery system for combating infection caused by Salmonella, a well-known intracellular and intraphagosomal pathogen. Chitosan dextran sulphate (CD) nanocapsules were assessed for their efficiency in delivering drugs against Salmonella. Methods: The CD nanocapsules were prepared using the layer-by-layer method and loaded with ciprofloxacin or ceftriaxone. Antibiotic-loaded nanocapsules were analysed in vitro for their ability to enter epithelial and macrophage cells to kill Salmonella. In vivo pharmacokinetics and organ distribution studies were performed to check the efficiency of the delivery system. The in vivo antibacterial activity of free antibiotic and antibiotic loaded into nanocapsules was tested in a murine salmonellosis model. Results: In vitro and in vivo experiments showed that this delivery system can be used effectively to clear Salmonella infection, CD nanocapsules were successfully employed for efficient targeting and killing of the intracellular pathogen at a dosage significantly lower than that of the free antibiotic. The increased retention time of ciprofloxacin in the blood and organs when it was delivered by CD nanocapsules compared with the conventional routes of administration may be the reason underlying the requirement for a reduced dosage and frequency of antibiotic administration. Conclusions: CD nanocapsules can be used as an efficient drug delivery system to treat intraphagosomal pathogens, especially Salmonella infection, This delivery system might be used effectively for other vacuolar pathogens including Mycobacteria, Brucella and Legionella.

A rhodamine-based `turn-on' Al3+ ion-selective reporter and the resultant complex as a secondary sensor for F- ion are applicable to living cell staining

A newly designed fluorescent aluminum(III) complex (L'-Al; 2) of a structurally characterized non-fluorescent rhodamine Schiff base (L) has been isolated in pure form and characterized using spectroscopic and physico-chemical methods with theoretical density functional theory (DFT) support. On addition of Al(III) ions to a solution of L in HEPES buffer (1 mM, pH 7.4; EtOH-water, 1 : 3 v/v) at 25 degrees C, the systematic increase in chelation-enhanced fluorescence (CHEF) enables the detection of Al(III) ions as low as 60 nM with high selectivity, unaffected by the presence of competitive ions. Interestingly, the Al(III) complex (L'-Al; 2) is specifically able to detect fluoride ions by quenching the fluorescence in the presence of large amounts of other anions in the HEPES buffer (1 mM, pH 7.4) at 25 degrees C. On the basis of our experimental and theoretical findings, the addition of Al3+ ions to a solution of L helps to generate a new fluorescence peak at 590 nm, due to the selective binding of Al3+ ions with L in a 1 : 1 ratio with a binding constant (K) of 8.13 x 10(4) M-1. The Schiff base L shows no cytotoxic effect, and it can therefore be employed for determining the intracellular concentration of Al3+ and F-ions by 2 in living cells using fluorescence microscopy.

Chitosan-dextran sulphate nanocapsule drug delivery system as an effective therapeutic against intraphagosomal pathogen Salmonella

Objectives: The ability to target conventional drugs efficiently inside cells to kill intraphagosomal bacteria has been a major hurdle in treatment of infective diseases. We aimed to develop an efficient drug delivery system for combating infection caused by Salmonella, a well-known intracellular and intraphagosomal pathogen. Chitosan dextran sulphate (CD) nanocapsules were assessed for their efficiency in delivering drugs against Salmonella. Methods: The CD nanocapsules were prepared using the layer-by-layer method and loaded with ciprofloxacin or ceftriaxone. Antibiotic-loaded nanocapsules were analysed in vitro for their ability to enter epithelial and macrophage cells to kill Salmonella. In vivo pharmacokinetics and organ distribution studies were performed to check the efficiency of the delivery system. The in vivo antibacterial activity of free antibiotic and antibiotic loaded into nanocapsules was tested in a murine salmonellosis model. Results: In vitro and in vivo experiments showed that this delivery system can be used effectively to clear Salmonella infection, CD nanocapsules were successfully employed for efficient targeting and killing of the intracellular pathogen at a dosage significantly lower than that of the free antibiotic. The increased retention time of ciprofloxacin in the blood and organs when it was delivered by CD nanocapsules compared with the conventional routes of administration may be the reason underlying the requirement for a reduced dosage and frequency of antibiotic administration. Conclusions: CD nanocapsules can be used as an efficient drug delivery system to treat intraphagosomal pathogens, especially Salmonella infection, This delivery system might be used effectively for other vacuolar pathogens including Mycobacteria, Brucella and Legionella.

Campylobacter jejuni colonization and transmission in broiler chickens: a modelling perspective.

Campylobacter jejuni is one of the most common causes of acute enteritis in the developed world. The consumption of contaminated poultry, where C. jejuni is believed to be a commensal organism, is a major risk factor. However, the dynamics of this colonization process in commercially reared chickens is still poorly understood. Quantification of these dynamics of infection at an individual level is vital to understand transmission within populations and formulate new control strategies. There are multiple potential routes of introduction of C. jejuni into a commercial flock. Introduction is followed by a rapid increase in environmental levels of C. jejuni and the level of colonization of individual broilers. Recent experimental and epidemiological evidence suggest that the celerity of this process could be masking a complex pattern of colonization and extinction of bacterial strains within individual hosts. Despite the rapidity of colonization, experimental transmission studies exhibit a highly variable and unexplained delay time in the initial stages of the process. We review past models of transmission of C. jejuni in broilers and consider simple modifications, motivated by the plausible biological mechanisms of clearance and latency, which could account for this delay. We show how simple mathematical models can be used to guide the focus of experimental studies by providing testable predictions based on our hypotheses. We conclude by suggesting that competition experiments could be used to further understand the dynamics and mechanisms underlying the colonization process. The population models for such competition processes have been extensively studied in other ecological and evolutionary contexts. However, C. jejuni can potentially adapt phenotypically through phase variation in gene expression, leading to unification of ecological and evolutionary time-scales. For a theoretician, the colonization dynamics of C. jejuni offer an experimental system to explore these 'phylodynamics', the synthesis of population dynamics and evolutionary biology.