Inside the research incubator : a case study of an intensive undergraduate research experience for nursing and midwifery students

Undergraduate research experiences are an increasing component of nursing and midwifery degrees. The Summer Research Scholarship Programme (SRSP) is a tertiary education initiative in Australia to provide an intensive undergraduate research experience. Between 2009 and 2010, six students and four academic faculty mentors in School of Nursing and Midwifery participated in an inaugural SRSP. This study explores the experiences of both students and faculty mentors to determine how this undergraduate research experience impacted student learning and interest in research. A qualitative case study approach was used to explore the research experiences of undergraduate student and faculty participants in an inaugural undergraduate research programme. Based on the results of two surveys four main themes were identified: (1) acquisition of research skills, (2) expectations, (3) academic engagement, and (4) continued interest in research. An intensive undergraduate research experience is a valuable component of student learning that has the capacity to contribute to immediate and longer-term learning and research outcomes.

The use of an electrostatic lens to enhance the efficiency of the electrospinning process

Electrospun scaffolds manufactured using conventional electrospinning configurations have an intrinsic thickness limitation, due to a charge build-up at the collector. To overcome this limitation, an electrostatic lens has been developed that, at the same relative rate of deposition, focuses the polymer jet onto a smaller area of the collector, resulting in the fabrication of thick scaffolds within a shorter period of time. We also observed that a longer deposition time (up to 13 h, without the intervention of the operator) could be achieved when the electrostatic lens was utilised, compared to 9–10 h with a conventional processing set-up and also showed that fibre fusion was less likely to occur in the modified method. This had a significant impact on the mechanical properties, as the scaffolds obtained with the conventional process had a higher elastic modulus and ultimate stress and strain at short times. However, as the thickness of the scaffolds produced by the conventional electrospinning process increased, a 3-fold decrease in the mechanical properties was observed. This was in contrast to the modified method, which showed a continual increase in mechanical properties, with the properties of the scaffold finally having similar mechanical properties to the scaffolds obtained via the conventional process at longer times. This “focusing” device thus enabled the fabrication of thicker 3-dimensional electrospun scaffolds (of thicknesses up to 3.5 mm), representing an important step towards the production of scaffolds for tissue engineering large defect sites in a multitude of tissues.

Addressing the impediments copyright imposes on the use of patent specifications and prior art documents to improve patent quality

This article considers from an Australian perspective the impediments that copyright law places in the path of those who seek to use patent specifications and non-patent prior art documents in ways that are necessary to the proper functioning of the patent system. Until recently, copyright law in Australia had limited the uses to which members of the public could put patent specifications in that country. Those impediments have been removed as a result of an important legislative change to the way in which copyright in patent specifications can be enforced. The change gives the public a greater freedom to make use of patent specifications than it enjoyed before, and removes unwarranted restrictions upon the ways in which the public can reuse valuable information. However, what the amendment does not address is the impediments copyright imposes on using non-patent prior art documents in ways that advance the public interest.

Moving MobileMums forward: protocol for a larger randomized controlled trial of an improved physical activity program for women with young children

Background: Women with young children (under 5 years) are a key population group for physical activity intervention. Previous evidence highlights the need for individually tailored programs with flexible delivery mechanisms for this group. Our previous pilot study suggested that an intervention primarily delivered via mobile phone text messaging (MobileMums) increased self-reported physical activity in women with young children. An improved version of the MobileMums program is being compared with a minimal contact control group in a large randomised controlled trial (RCT). Methods/design: This RCT will evaluate the efficacy, feasibility and acceptability, cost-effectiveness, mediators and moderators of the MobileMums program. Primary (moderate-vigorous physical activity) and secondary (intervention implementation data, health service use costs, intervention costs, health benefits, theoretical constructs) outcomes are assessed at baseline, 3-months (end of intervention) and 9-months (following 6-month no contact: maintenance period). The trial is registered with the Australian New Zealand Clinical Trials Registry (ACTRN12611000481976; https://www.anzctr.org.au/Trial/Registration/TrialReview.aspx?id=336109).The intervention commences with a face-to-face session with a behavioural counsellor to initiate rapport and gather information for tailoring the 12-week text message program. During the program participants also have access to a: MobileMums Participant Handbook, MobileMums refrigerator magnet, MobileMums Facebook(C) group, and a MobileMums website with a searchable, on-line exercise directory. A nominated support person also receives text messages for 12-weeks encouraging them to offer their MobileMum social support for physical activity. Discussion: Results of this trial will determine the efficacy and cost-effectiveness of the MobileMums program, and the feasibility of delivering it in a community setting. It will inform the broader literature of physical activity interventions for women with young children and determine whether further investment in the translation of the program is warranted.

Development of school connectedness as a component of an injury prevention program for early adolescents

The current program of research addresses the need for multi-level programs to target the major increase in injury rates that occurs throughout adolescence. Specifically, it involves the investigation of school connectedness as a protective factor for adolescent injury, and the development of school connectedness as a component of an injury prevention program. To date, school-based risk taking and injury prevention has frequently been limited to addressing adolescents' knowledge and attitudes to risk behaviours, and has largely overlooked the importance of the wider school social context as a protective factor in adolescent development. Additionally, school connectedness has been primarily studied in terms of its impact on student achievement, wellbeing and risk taking behaviour, and research has not yet addressed possible links with injury. Further, school connectedness intervention programs have targeted risk taking behaviours without evaluating their potential impact on injury outcomes. This is the first reported research to develop strategies to increase school connectedness as part of a school-based injury prevention program. The research program was conceptualised as three distinct stages. The development of these research stages was informed by a comprehensive review of the literature on adolescent risk taking, injury and school-based prevention, as well as on school connectedness and its importance in adolescence. A review of the school connectedness literature indicated that students' connectedness is largely influenced by relationships within the school context including with teachers and other school staff, and is therefore a potentially modifiable factor that may be targeted in school-based programs. Overall, the literature shows school connectedness to be a key protective factor in adolescent development. This review established a foundation from which the current program of research was designed. The first stage of the research involved an empirical investigation of the relationship between adolescent risk taking-related injuries and school connectedness. Stage one incorporated two studies. The first involved the development of a measure of adolescent injury, the Extended Adolescent Injury Checklist (E-AIC), for use in the current research as well as in future school-based studies and program evaluation. The results of this study also highlighted the extent of the problem of risk-related injury in adolescence. The second study in Stage one examined the relationship between students' reports of school connectedness, risk taking behaviour and risk taking-related injuries on the E-AIC. The results of this study showed significant relationships between increased school connectedness and reduced reported engagement in transport and violence risk taking, and fewer associated injuries. This study therefore suggested the potential for school-based injury prevention programs to incorporate strategies targeting increased adolescent connectedness to school. The second stage of this research involved the compilation of an evidence base to inform the design of a school connectedness intervention. Stage two also incorporated two studies. The first study in Stage two involved a systematic review of programs that have targeted school connectedness for reduced risk taking and injury. The results of this study revealed that interventions targeting school connectedness can be effective in reducing adolescent risk taking behaviour, and also provided an evidence base for the design of the current school connectedness intervention. The second study in Stage two examined teachers' understanding and perceptions of school connectedness. This qualitative study indicated that teachers consider students' connectedness to be an important factor that relates to their risk taking behaviour; and also provided directions and content for the intervention design stage. The third stage of this research built upon the findings of each of the previous studies, and involved the design, implementation and evaluation of a school connectedness intervention as a component of an adolescent injury prevention program, Skills for Preventing Injury in Youth (SPIY). This connectedness intervention was designed as a professional development workshop for teachers of 13 to 14 year old adolescents, and was developed as a complementary component to the curriculum-based SPIY program. The SPIY connectedness component was implemented and evaluated using process and six-month impact evaluation methodologies. The results of this study revealed that teachers saw value in the program and made use of the strategies presented, and that program school students' self-reported violence risk behaviour was reduced at six-month follow-up. Despite these promising findings, the results of this study did not demonstrate a significant impact of the program on change in students' connectedness to school, relative to comparison schools. The positive impact on self-reported violence risk behaviour was however replicated in additional analyses comparing students participating in the connectedness version of SPIY with students participating in an earlier curriculumonly version of the program. This finding indicated that the connectedness component has additional benefits relating to reduction in violence risks, over and above a curriculum-only version of the program. This research was the first reported to address the relationship between school connectedness and adolescent injury outcomes, and to develop school connectedness as a component of an adolescent injury prevention program. Overall, the results of this program of research have demonstrated the importance of incorporating strategies targeting the wider school social context, including school connectedness, in adolescent injury prevention programs. This research has important implications for future research and practice in adolescent injury prevention.

Get real : the development, implementation and evaluation of an intervention for primary aged children with High Functioning Autism

Children with Autism Spectrum Disorder experience difficulty in communication and in understanding the social world which can have negative consequences for their relationships, in managing emotions, and generally dealing with the challenges of everyday life. This thesis examines the effectiveness of the Active and Reflective components of the Get REAL program through the assessment of the detailed coding of video-recorded observations and longitudinal quantitative analysis. The aim of Get REAL is to increase the social, emotional, and cognitive learning of children with High Functioning Autism (HFA). Get REAL is a group program designed specifically for use in inclusive primary school settings. The Get REAL program was designed in response to the mixed success of generalisation of learning to new contexts of existing social skills programs. The theoretical foundation of Get REAL is based upon pedagogical theory and learning theory to facilitate transfer of learning, combined with experiential, individualised, evaluative and organisational approaches. This thesis is by publication and consists of four refereed journal papers; 1 accepted for publication and 3 that are under review. Paper 1 describes the development and theoretical basis of the Get REAL program and provides detail of the program structure and learning cycle. The focus of Paper 1 reflects the first question of interest in the thesis which is about the extent to which learning derived from participation in the program can be generalised to other contexts. Participants are 16 children with HFA ranging in age from 8-13 years. Results provided support for the generalisability of learning from Get REAL to home and school evidenced by parent and teacher data collected pre and post participation in Get REAL. Following establishment of the generalisation of learning from Get REAL, Papers 2 and 3 focus on the Active and Reflective components of the program in order to examine how individual and group learning takes place. Participants (N = 12) in the program are video-taped during the Active and Reflective Sessions. Using identical coding protocols of video data, improvements in prosocial behaviour and diminishing of inappropriate behaviours were apparent with the exception of perspective taking. Data also revealed that 2 of the participants had atypical trajectories. An in-depth case study analysis was then conducted with these 2 participants in Paper 4. Data included reports from health care and education professionals within the school and externally (e.g., paediatrician) and identified the multi-faceted nature of care needed for children with comorbid diagnoses and extremely challenging family circumstances as a complex task to effect change. Results of this research support the effectiveness of the Get REAL program in promoting pro social behaviours such as improvements in engaging with others and emotional regulation, and in diminishing unwanted behaviours such as conduct problems. Further, the gains made by the participating children were found to be generalisable beyond Get REAL to home and other school settings. The research contained in the thesis adds to current knowledge about how learning can take place for children with HFA. Results show that an experiential learning framework with a focus on social cognition, together with explicit teaching, scaffolded with video feedback, are key ingredients for the generalisation of social learning to broader contexts.

Building an augmented map for road risk assessment

Recent road safety statistics show that the decades-long fatalities decreasing trend is stopping and stagnating. Statistics further show that crashes are mostly driven by human error, compared to other factors such as environmental conditions and mechanical defects. Within human error, the dominant error source is perceptive errors, which represent about 50% of the total. The next two sources are interpretation and evaluation, which accounts together with perception for more than 75% of human error related crashes. Those statistics show that allowing drivers to perceive and understand their environment better, or supplement them when they are clearly at fault, is a solution to a good assessment of road risk, and, as a consequence, further decreasing fatalities. To answer this problem, currently deployed driving assistance systems combine more and more information from diverse sources (sensors) to enhance the driver's perception of their environment. However, because of inherent limitations in range and field of view, these systems' perception of their environment remains largely limited to a small interest zone around a single vehicle. Such limitations can be overcomed by increasing the interest zone through a cooperative process. Cooperative Systems (CS), a specific subset of Intelligent Transportation Systems (ITS), aim at compensating for local systems' limitations by associating embedded information technology and intervehicular communication technology (IVC). With CS, information sources are not limited to a single vehicle anymore. From this distribution arises the concept of extended or augmented perception. Augmented perception allows extending an actor's perceptive horizon beyond its "natural" limits not only by fusing information from multiple in-vehicle sensors but also information obtained from remote sensors. The end result of an augmented perception and data fusion chain is known as an augmented map. It is a repository where any relevant information about objects in the environment, and the environment itself, can be stored in a layered architecture. This thesis aims at demonstrating that augmented perception has better performance than noncooperative approaches, and that it can be used to successfully identify road risk. We found it was necessary to evaluate the performance of augmented perception, in order to obtain a better knowledge on their limitations. Indeed, while many promising results have already been obtained, the feasibility of building an augmented map from exchanged local perception information and, then, using this information beneficially for road users, has not been thoroughly assessed yet. The limitations of augmented perception, and underlying technologies, have not be thoroughly assessed yet. Most notably, many questions remain unanswered as to the IVC performance and their ability to deliver appropriate quality of service to support life-saving critical systems. This is especially true as the road environment is a complex, highly variable setting where many sources of imperfections and errors exist, not only limited to IVC. We provide at first a discussion on these limitations and a performance model built to incorporate them, created from empirical data collected on test tracks. Our results are more pessimistic than existing literature, suggesting IVC limitations have been underestimated. Then, we develop a new CS-applications simulation architecture. This architecture is used to obtain new results on the safety benefits of a cooperative safety application (EEBL), and then to support further study on augmented perception. At first, we confirm earlier results in terms of crashes numbers decrease, but raise doubts on benefits in terms of crashes' severity. In the next step, we implement an augmented perception architecture tasked with creating an augmented map. Our approach is aimed at providing a generalist architecture that can use many different types of sensors to create the map, and which is not limited to any specific application. The data association problem is tackled with an MHT approach based on the Belief Theory. Then, augmented and single-vehicle perceptions are compared in a reference driving scenario for risk assessment,taking into account the IVC limitations obtained earlier; we show their impact on the augmented map's performance. Our results show that augmented perception performs better than non-cooperative approaches, allowing to almost tripling the advance warning time before a crash. IVC limitations appear to have no significant effect on the previous performance, although this might be valid only for our specific scenario. Eventually, we propose a new approach using augmented perception to identify road risk through a surrogate: near-miss events. A CS-based approach is designed and validated to detect near-miss events, and then compared to a non-cooperative approach based on vehicles equiped with local sensors only. The cooperative approach shows a significant improvement in the number of events that can be detected, especially at the higher rates of system's deployment.

Fuel consumption and gas emissions of an automatic transmission vehicle following simple eco-driving instructions on urban roads

Following eco-driving instructions can reduce fuel consumption between 5 to 20% on urban roads with manual cars. The majority of Australian cars have an automatic transmission gear-box. It is therefore of interest to verify whether current eco-driving instructions are e cient for such vehicles. In this pilot study, participants (N=13) drove an instrumented vehicle (Toyota Camry 2007) with an automatic transmission. Fuel consumption of the participants was compared before and after they received simple eco-driving instructions. Participants drove the same vehicle on the same urban route under similar tra c conditions. We found that participants drove at similar speeds during their baseline and eco-friendly drives, and reduced the level of their accelerations and decelerations during eco-driving. Fuel consumption decreased for the complete drive by 7%, but not on the motorway and inclined sections of the study. Gas emissions were estimated with the VT-micro model, and emissions of the studied pollutants (CO2, CO, NOX and HC) were reduced, but no di erence was observed for CO2 on the motorway and inclined sections. The di erence for the complete lap is 3% for CO2. We have found evidence showing that simple eco-driving instructions are e cient in the case of automatic transmission in an urban environment, but towards the lowest values of the spectrum of fuel consumption reduction from the di erent eco-driving studies.

Microstructure of an artificial grain boundary weak link in an YBa2Cu3O(7-δ) thin film grown on a (100)(110), [001]-tilt Y-ZrO2 bicrystal

The microstructure of an artificial grain boundary in an YBa2Cu3O7-δ (YBCO) thin film grown on a (100)(110), [001]-tilt yttria-stabilized-zirconia (YSZ) bicrystal substrate has been studied using transmission electron microscopy (TEM). The orientation relationship between the YBCO film and the YSZ substrate was [001]YBCO∥[001]YSZ and [110]YBCO∥[100]YSZ for each half of the bicrystal film. However, the exact boundary geometry of the bicrystal substrate was not transferred to the film. The substrate boundary was straight while the film boundary was wavy. In several cases there was bending of the lattice confined within a distance of a few basal-plane lattice spacings from the boundary plane and microfaceting. No intergranular secondary phase was observed but about 25% of the boundary was covered by c-axis-tilted YBCO grains and a-axis-oriented grains, both of which were typically adjacent to CuO grains or surrounded by a thin Cu-rich amorphous layer.

A pre-post evaluation of an ambulatory nutrition support service for malnourished patients post hospital discharge: a pilot study

Introduction Malnutrition is common among hospitalised patients, with poor follow-up of nutrition support post-discharge. Published studies on the efficacy of ambulatory nutrition support (ANS) for malnourished patients post-discharge are scarce. The aims of this study were to evaluate the rate of dietetics follow-up of malnourished patients post-discharge, before (2008) and after (2010) implementation of a new ANS service, and to evaluate nutritional outcomes post-implementation. Materials and Methods Consecutive samples of 261 (2008) and 163 (2010) adult inpatients referred to dietetics and assessed as malnourished using Subjective Global Assessment (SGA) were enrolled. All subjects received inpatient nutrition intervention and dietetic outpatient clinic follow-up appointments. For the 2010 cohort, ANS was initiated to provide telephone follow-up and home visits for patients who failed to attend the outpatient clinic. Subjective Global Assessment, body weight, quality of life (EQ-5D VAS) and handgrip strength were measured at baseline and five months post-discharge. Paired t-test was used to compare pre- and post-intervention results. Results In 2008, only 15% of patients returned for follow-up with a dietitian within four months post-discharge. After implementation of ANS in 2010, the follow-up rate was 100%. Mean weight improved from 44.0 ± 8.5kg to 46.3 ± 9.6kg, EQ-5D VAS from 61.2 ± 19.8 to 71.6 ± 17.4 and handgrip strength from 15.1 ± 7.1 kg force to 17.5 ± 8.5 kg force; p<0.001 for all. Seventy-four percent of patients improved in SGA score. Conclusion Ambulatory nutrition support resulted in significant improvements in follow-up rate, nutritional status and quality of life of malnourished patients post-discharge.

Effect of an adiabatic fin on natural convection heat transfer in a triangular enclosure

Natural convection thermal boundary layer adjacent to the heated inclined wall of a right angled triangle with an adiabatic fin attached to that surface is investigated by numerical simulations. The finite volume based unsteady numerical model is adopted for the simulation. It is revealed from the numerical results that the development of the boundary layer along the inclined surface is characterized by three distinct stages, i.e. a start-up stage, a transitional stage and a steady stage. These three stages can be clearly identified from the numerical simulations. Moreover, in presence of adiabatic fin, the thermal boundary layer adjacent to the inclined wall breaks initially. However, it is reattached with the downstream boundary layer next to the fin. More attention has been given to the boundary layer development near the fin area.

Evaluation of an ambulatory nutrition support service for malnourished patients post hospital discharge

Introduction Malnutrition is common among hospitalised patients, with poor follow-up of nutrition support post-discharge. Published studies on the efficacy of ambulatory nutrition support (ANS) for malnourished patients post-discharge are scarce. The aims of this study were to evaluate the rate of dietetics follow-up of malnourished patients post-discharge, before (2008) and after (2010) implementation of a new ANS service, and to evaluate nutritional outcomes post-implementation. Materials and Methods Consecutive samples of 261 (2008) and 163 (2010) adult inpatients referred to dietetics and assessed as malnourished using Subjective Global Assessment (SGA) were enrolled. All subjects received inpatient nutrition intervention and dietetic outpatient clinic follow-up appointments. For the 2010 cohort, ANS was initiated to provide telephone follow-up and home visits for patients who failed to attend the outpatient clinic. Subjective Global Assessment, body weight, quality of life (EQ-5D VAS) and handgrip strength were measured at baseline and five months post-discharge. Paired t-test was used to compare pre- and post-intervention results. Results In 2008, only 15% of patients returned for follow-up with a dietitian within four months post-discharge. After implementation of ANS in 2010, the follow-up rate was 100%. Mean weight improved from 44.0 ± 8.5kg to 46.3 ± 9.6kg, EQ-5D VAS from 61.2 ± 19.8 to 71.6 ± 17.4 and handgrip strength from 15.1 ± 7.1 kg force to 17.5 ± 8.5 kg force; p<0.001 for all. Seventy-four percent of patients improved in SGA score. Conclusion Ambulatory nutrition support resulted in significant improvements in follow-up rate, nutritional status and quality of life of malnourished patients post-discharge.

Child eating behaviour outcomes of an early feeding intervention to reduce risk indicators for child obesity : the NOURISH RCT

Objective Describe parent-reported child eating behaviour and maternal parenting impact outcomes of an infant feeding intervention to reduce child obesity risk. Design and Methods An assessor masked Randomised Controlled Trial (RCT) with concealed allocation of individual mother-infant dyads. The NOURISH RCT enrolled 698 first-time mothers (mean age 30.1 years, SD=5.3) with healthy term infants (51% female) aged 4.3 months (SD=1.0) at baseline. Outcomes were assessed six months post-intervention when the children were 2-years old. Mothers reported on child eating behaviours using the Child Eating Behaviour Questionnaire (CEBQ), food preferences and dietary intake using a 24-hour telephone recall. Parenting was assessed using five scales validated for use in Australia. Results Intervention effects were evident on the CEBQ overall (MANOVA P=.002) and 4/8 subscales: child satiety responsiveness (P=.03), fussiness (P=.01), emotional overeating (P<.01), and food responsiveness (P=.06). Intervention children ‘liked’ more fruits (P<.01) and fewer non-core foods and beverages (Ps=.06, .03). The intervention mothers reported greater ‘autonomy encouragement’ (P=.002) Conclusions Anticipatory guidance on protective feeding practices appears to have modest positive impacts on child eating behaviours that are postulated to reduce future obesity risk.

Design and flight testing of an integrated solar powered UAV and WSN for remote gas sensing

This paper describes a generic and integrated solar powered remote Unmanned Air Vehicles (UAV) and Wireless Sensor Network (WSN) gas sensing system. The system uses a generic gas sensing system for CH4 and CO2 concentrations using metal oxide (MoX) and non-dispersive infrared sensors, and a new solar cell encapsulation method to power the UASs as well as a data management platform to store, analyse and share the information with operators and external users. The system was successfully field tested at ground and low altitudes, collecting, storing and transmitting data in real time to a central node for analysis and 3D mapping. The system can be used in a wide range of outdoor applications, especially in agriculture, bushfires, mining studies, opening the way to a ubiquitous low cost environmental monitoring. A video of the bench and flight test performed can be seen in the following link https://www.youtube.com/watch?v=Bwas7stYIxQ.